THE ALL-ROUND PARTNER FOR HOME AND BUILDING AUTOMATION WITH KNX

KNX news

With the new KNX IO series, Weinzierl is expanding its product range with universal inputs and outputs for KNX with a width of only 1TE (18mm). This granularity offers maximum flexibility especially for small and medium-sized plants.

Consistent operating concept
All devices are presented with a consistent operating concept with 3 multi-colored LEDs and 2 buttons for manual operation. An easy-to-install design with screw terminals for easy plugging in and out helps reduce costs on the construction site. All devices can be configured with the ETS software without plug-ins and are characterized by short download times.

Get to know all devices of the new KNX IO series with our KNX IO StarterKit

KNX IO 410
Binary input with 4 channels for controlling light, blinds, etc. with conventional switches or contacts. The inputs can be controlled with an external voltage of 12 to 230 V.

KNX IO 411
Binary input with 4 channels for controlling light, blinds, etc. with conventional switches or contacts. The inputs are suitable for potential-free contacts.

KNX IO 510
Switch actuator with two channels. The device offers universal relay outputs with scene switching, time and staircase lighting. In addition, the device allows the control of heating valves (PWM for thermal actuators).

KNX IO 511
Switch actuator with one output and two binary inputs. The output provides a universal relay output with scene switching, time and staircase lighting. In addition, the device allows the control of thermal actuators.

KNX IO 520
Shutter actuator with one channel and two binary inputs. The actuator is used to control a roller shutter or a blind. The inputs can be connected to conventional switches with an external voltage of 12 to 230 V.

KNX IO STARTER KIT

Watch Weinzierl news at the light+building HERE.

Follow Futurasmus:
Youtube,
Vimeo,
Instagram,
Twitter,
Facebook,
Linkedin,
Google +.

For further information do not hesitate to contact us on the phone +34 965.95.95.11 or the email commercial@futurasmus-knxgroup.com

Intesis presents new gateways for VRF systems.

This are the new gateways:

- KNX - HITACHI AC Commercial Lines (PAC, VRF).
- KNX - HISENSE AC Commercial Lines (PAC, VRF).

This are some of the gateways characteristics:

- Reduced dimensions and quick installation.
- Multiple objects for control and status (bit, byte, characters…) with KNX standard datapoint types.
- Status objects for every control available.
- Timeout for Open Window and Occupancy. Sleep function also available.
- Control of the AC unit based on the ambient temperature read by the own AC unit, or in the ambient temperature read by any KNX thermostat.
- AC unit can be controlled simultaneously by the wired remote control of the AC unit and by KNX.
- Total Control and Monitoring of the AC unit from KNX, including monitoring of AC unit’s state of internal variables, running hours counter (for filter maintenance control), and error indication and error code.
- Up to 5 scenes can be saved and executed from KNX, fixing the desired combination of Operation Mode, Set Temperature, Fan Speed, Vane Position and Remote Controller Lock at any moment by using a simple switching.
- Four binary inputs for potential-free contacts provide the possibility to integrate many types of external devices. Also configurable from ETS, they can be used for switching, dimming, shutter/blind control, and more.

Watch Intesis news at the light+building HERE.

See the product pages in the Futurasmus web:
KNX - HITACHI AC Commercial Lines (PAC, VRF) with 4 binary inputs
KNX - HISENSE AC Commercial Lines (PAC, VRF) with 4 binary inputs

Follow Futurasmus:
Youtube,
Vimeo,
Instagram,
Twitter,
Facebook,
Linkedin,
Google +.

For further information do not hesitate to contact us on the phone +34 965.95.95.11 or the email commercial@futurasmus-knxgroup.com

Have you already seen it at the light & building 2018? Now it is here: the ceiling mounted sensor Intra-Sewi KNX!

Genuine glass in jet black or signal white, functional and elegant lamella, only 5 mm installation hight: Intra-Sewi KNX combines restraint and elegance. For this is was awarded the Red Dot Award 2018.

The assembly is also practical. The sensor is easily mounted with spring clips in suspended ceilings or inserted into a standard accessory socket.

Choose the ideal sensor combination for your project from four models. Each variant integrates the appropriate KNX functions, such as temperature or ventilation control, mixed value calculation, actuating variable comparator and logic modules.

Watch Intra-Sewi presentation and other Elsner products at the ligh+building HERE.

See the product pages in the Futurasmus web:
SENSOR INTRA-SEWI KNX TH-PR White
SENSOR INTRA-SEWI KNX TH-PR Black

Follow Futurasmus:
Youtube,
Vimeo,
Instagram,
Twitter,
Facebook,
Linkedin,
Google +.

For further information do not hesitate to contact us on the phone +34 965.95.95.11 or the email commercial@futurasmus-knxgroup.com

ISE presents his new firmware versión and 3 new products this moth. Read about all products then:

New firmware version: ISE SMART CONNECT KNX REMOTE ACCESS
-Use 50 notifications (e-mail, SMS*, voice call*, IFTTT)
-Enter threshold values for notifications, e.g. for temperature fluctuations
-The Remote Access is now "KNX Secure Ready" (currently only for gateways that are delivered with firmware 4.0 ex factory)
*Chargeable additional service sms77 or Messagebird.
The device can be updated using the integrated function on the device web page, or you can use the current firmware with the firmware update tool

ISE SMART CONNECT KNX LOEWE
Smart home entertainment with Loewe and KNX
Via the new gateway ISE SMART CONNECT KNX LOEWE, up to two televisions can be integrated into the KNX and adapted completely to meet your own requirements. Set your imagination free.

A smart start to your day
The day begins, the blinds open and light slowly fills the bedroom. The motion detector records that you have gotten up and switches the television on in the kitchen to show the day’s news.
Lights, camera, action for an evening movie
Start your movie night by switching on the television. The blinds darken the room automatically and a matching lighting mood brings a suitable atmosphere into the room.

Leaving the house
When you leave your house, your smart home switches into absence mode. This not only switches lighting off, but also puts the television into standby. Or perhaps you want it to become part of an occupied-home simulation. It’s entirely up to you.

Plus points:
-Perfect integration of Loewe TV devices in application scenarios
-Integrate messages into TV, e.g. “Washing machine is finished” or “Motion detected in garden”
-Use TV devices also in absence mode

ISE SMART CONNECT KNX VIEGA
Innovative single-room controll - now VIEGA and KNX take care of things together.
The ISE SMART CONNECT KNX VIEGA integrates the innovative Fonterra Smart Control single-room control by viega into the KNX system.
Up to five base stations can be controlled with the ISE SMART CONNECT KNX VIEGA. Up to 8 room temperature controllers and 12 outlets can be connected to each of these base stations.

Intelligent energy saving
During longer periods of absence, such as holidays or business trips, you can simply set the system into absence mode. You can also define your scheduled return time. The system will make sure that the heating is on at the right time, whilst saving considerable energy during the remaining period.

A comfortable temperature at just the right time
Cosy warmth in the bathroom in the morning, soothing coolness in the bedroom at night. The Fonterra Smart Control will take care of the rest.

While you’re away
With remote access, such as the ISE SMART CONNECT KNX REMOTE ACCESS and a KNX visualisation, you can easily adjust the temperature to suit your individual requirements even when you’re not at home.

Plus points:
-Saving energy during longer absences
-Integration of panel heating into usage scenarios
-Integration into visualisations, e.g. Gira HomeServer, Gira X1
-Absence mode and scheduled return can be configured
-Hydraulic balancing takes place automatically and permanently

ISE KNX RF USB-Stick
Convenient and wireless access to a KNX installation from a PC or laptop.
The new KNX RF USB-Stick serves as an interface to KNX installations via radio, using the KNX RF standard. This enables the communication of KNX devices with PC tools.

Plus points:
-Wireless communication between PC and KNX/RF (radio)
-Start-up and troubleshooting via ETS5 or higher
-Supports longer telegrams (extended frames)
-Supports the start-up of KNX/RF Secure devices
-No additional USB driver required

The product pages in the Futurasmus web:
ISE SMART CONNECT KNX REMOTE ACCESS
ISE SMART CONNECT KNX LOEWE
ISE SMART CONNECT KNX VIEGA
ISE KNX RF USB-Stick

Follow Futurasmus:
Youtube,
Vimeo,
Instagram,
Twitter,
Facebook,
Linkedin,
Google +.

For further information do not hesitate to contact us on the phone +34 965.95.95.11 or the email commercial@futurasmus-knxgroup.com

Every second year, the Futurasmus team travels to the light+building in Frankfurt, the most relevant international fair for KNX professionals. This year a total of 2.714 exhibitors from 55 different countries have shown their latest products; over 220.000 visitors from 177 different nationalities had the chance to enjoy this impressive show.

We want to share with you the most important news of the light+building 2018 and the most innovative KNX devices, that is why we have compiled all the videos that we have published every 2 days. You will find push-buttons, KNX Secure devices, DALI gateways, sensors, dimmer, actuators, room controllers, panels, Smart Metering, meters, visualizations, web servers, A/C gateways, interfaces and software.

Here you have all the videos with Best of light+building 2018: