Interra iSwitch ITR3XX–XXXX, is a wall – mounting room controller for on / off switching loads, dimming of lighting devices, control of motor drives or other programmable switching and control functions. At the same time, iSwitch can be used as a secondary product that can act as a room probe or thermostat, at a section of the building or a room, an electronic digital temperature controller, heating, cooling and air conditioning control and regulation. iSwitch room temperature controller is developed according to the KNX standard for using in houses and buildings control systems. iSwitch room temperature controller thanks to integrated sensors is can be used for heating, cooling and air condition and regulation, also can measures room temperature and relative humidity values directly. iSwitch can receive temperature, relative humidity and CO2 concentration values from other bus devices via KNX bus system. In iSwitch models with LCD display, related to room controller function various informations can be displayed visually.
iSwitch is equipped with a user interface to display room air conditions and modify desired setpoint. Depending on the air conditioning infrastructure, end user can determine up to 5 different fan speed values manually or automatically, working at integrated system. iSwitch product range include 9 different models, there are 3 models with LCD display, 6 models without LCD. In models with LCD display, LCD is located vertically at the center area of the product between the gangs. In models without LCD display (except 10 button model) the center area is designed as a blank cover like the other buttons which got same materials to provide decorative fit. In 10 button model without LCD, the center area buttons are designed with same materials like other button covers that provides decorative fit with 2 separate buttons. All iSwitch models can be programmed with only one database
• All 9 models can be programmable with same database.
• Pushbutton has Switching, toggle, dimming, shutter/blinds,thermostat controls, scenes, value, 2 channels, step switchin mode features.
• Locking feature available for each button and complete device
• On/Off (2-points) and Proportional (Continuous or PWM) thermostat functions.
• Comfort, standby, economy and building protection operating modes.
• Manual or Automatic switching between Heat and Cool modes.
• Temperature measuring through integrated sensor with possibility of sending the value on change and periodically to the bus.
• Temperature (measured, external, setpoint, outdoor values as ºC or ºF), CO2 concentration(from bus), humidity operating modes, fan levels, on/off indicator, warnings and locking status are displayed on LCDs.
• Fan controller available with up to 5-speeds.
• Relative humidity measuring through the integrated sensor with possibility of sending the value on the bus.
• Threshold alarm define for temperature and humidity levels
Interra iSwitch ITR3XX–XXXX, is a wall – mounting room controller for on / off switching loads, dimming of lighting devices, control of motor drives or other programmable switching and control functions. At the same time, iSwitch can be used as a secondary product that can act as a room probe or thermostat, at a section of the building or a room, an electronic digital temperature controller, heating, cooling and air conditioning control and regulation. iSwitch room temperature controller is developed according to the KNX standard for using in houses and buildings control systems. iSwitch room temperature controller thanks to integrated sensors is can be used for heating, cooling and air condition and regulation, also can measures room temperature and relative humidity values directly. iSwitch can receive temperature, relative humidity and CO2 concentration values from other bus devices via KNX bus system. In iSwitch models with LCD display, related to room controller function various informations can be displayed visually.
iSwitch is equipped with a user interface to display room air conditions and modify desired setpoint. Depending on the air conditioning infrastructure, end user can determine up to 5 different fan speed values manually or automatically, working at integrated system. iSwitch product range include 9 different models, there are 3 models with LCD display, 6 models without LCD. In models with LCD display, LCD is located vertically at the center area of the product between the gangs. In models without LCD display (except 10 button model) the center area is designed as a blank cover like the other buttons which got same materials to provide decorative fit. In 10 button model without LCD, the center area buttons are designed with same materials like other button covers that provides decorative fit with 2 separate buttons. All iSwitch models can be programmed with only one database
• All 9 models can be programmable with same database.
• Pushbutton has Switching, toggle, dimming, shutter/blinds,thermostat controls, scenes, value, 2 channels, step switchin mode features.
• Locking feature available for each button and complete device
• On/Off (2-points) and Proportional (Continuous or PWM) thermostat functions.
• Comfort, standby, economy and building protection operating modes.
• Manual or Automatic switching between Heat and Cool modes.
• Temperature measuring through integrated sensor with possibility of sending the value on change and periodically to the bus.
• Temperature (measured, external, setpoint, outdoor values as ºC or ºF), CO2 concentration(from bus), humidity operating modes, fan levels, on/off indicator, warnings and locking status are displayed on LCDs.
• Fan controller available with up to 5-speeds.
• Relative humidity measuring through the integrated sensor with possibility of sending the value on the bus.
• Threshold alarm define for temperature and humidity levels
Interra iSwitch ITR3XX–XXXX, is a wall – mounting room controller for on / off switching loads, dimming of lighting devices, control of motor drives or other programmable switching and control functions. At the same time, iSwitch can be used as a secondary product that can act as a room probe or thermostat, at a section of the building or a room, an electronic digital temperature controller, heating, cooling and air conditioning control and regulation. iSwitch room temperature controller is developed according to the KNX standard for using in houses and buildings control systems. iSwitch room temperature controller thanks to integrated sensors is can be used for heating, cooling and air condition and regulation, also can measures room temperature and relative humidity values directly. iSwitch can receive temperature, relative humidity and CO2 concentration values from other bus devices via KNX bus system. In iSwitch models with LCD display, related to room controller function various informations can be displayed visually.
iSwitch is equipped with a user interface to display room air conditions and modify desired setpoint. Depending on the air conditioning infrastructure, end user can determine up to 5 different fan speed values manually or automatically, working at integrated system. iSwitch product range include 9 different models, there are 3 models with LCD display, 6 models without LCD. In models with LCD display, LCD is located vertically at the center area of the product between the gangs. In models without LCD display (except 10 button model) the center area is designed as a blank cover like the other buttons which got same materials to provide decorative fit. In 10 button model without LCD, the center area buttons are designed with same materials like other button covers that provides decorative fit with 2 separate buttons. All iSwitch models can be programmed with only one database
• All 9 models can be programmable with same database.
• Pushbutton has Switching, toggle, dimming, shutter/blinds,thermostat controls, scenes, value, 2 channels, step switchin mode features.
• Locking feature available for each button and complete device
• On/Off (2-points) and Proportional (Continuous or PWM) thermostat functions.
• Comfort, standby, economy and building protection operating modes.
• Manual or Automatic switching between Heat and Cool modes.
• Temperature measuring through integrated sensor with possibility of sending the value on change and periodically to the bus.
• Temperature (measured, external, setpoint, outdoor values as ºC or ºF), CO2 concentration(from bus), humidity operating modes, fan levels, on/off indicator, warnings and locking status are displayed on LCDs.
• Fan controller available with up to 5-speeds.
• Relative humidity measuring through the integrated sensor with possibility of sending the value on the bus.
• Threshold alarm define for temperature and humidity levels
Interra iSwitch ITR3XX–XXXX, is a wall – mounting room controller for on / off switching loads, dimming of lighting devices, control of motor drives or other programmable switching and control functions. At the same time, iSwitch can be used as a secondary product that can act as a room probe or thermostat, at a section of the building or a room, an electronic digital temperature controller, heating, cooling and air conditioning control and regulation. iSwitch room temperature controller is developed according to the KNX standard for using in houses and buildings control systems. iSwitch room temperature controller thanks to integrated sensors is can be used for heating, cooling and air condition and regulation, also can measures room temperature and relative humidity values directly. iSwitch can receive temperature, relative humidity and CO2 concentration values from other bus devices via KNX bus system. In iSwitch models with LCD display, related to room controller function various informations can be displayed visually.
iSwitch is equipped with a user interface to display room air conditions and modify desired setpoint. Depending on the air conditioning infrastructure, end user can determine up to 5 different fan speed values manually or automatically, working at integrated system. iSwitch product range include 9 different models, there are 3 models with LCD display, 6 models without LCD. In models with LCD display, LCD is located vertically at the center area of the product between the gangs. In models without LCD display (except 10 button model) the center area is designed as a blank cover like the other buttons which got same materials to provide decorative fit. In 10 button model without LCD, the center area buttons are designed with same materials like other button covers that provides decorative fit with 2 separate buttons. All iSwitch models can be programmed with only one database
• All 9 models can be programmable with same database.
• Pushbutton has Switching, toggle, dimming, shutter/blinds,thermostat controls, scenes, value, 2 channels, step switchin mode features.
• Locking feature available for each button and complete device
• On/Off (2-points) and Proportional (Continuous or PWM) thermostat functions.
• Comfort, standby, economy and building protection operating modes.
• Manual or Automatic switching between Heat and Cool modes.
• Temperature measuring through integrated sensor with possibility of sending the value on change and periodically to the bus.
• Temperature (measured, external, setpoint, outdoor values as ºC or ºF), CO2 concentration(from bus), humidity operating modes, fan levels, on/off indicator, warnings and locking status are displayed on LCDs.
• Fan controller available with up to 5-speeds.
• Relative humidity measuring through the integrated sensor with possibility of sending the value on the bus.
• Threshold alarm define for temperature and humidity levels
