THE ALL-ROUND PARTNER FOR HOME AND BUILDING AUTOMATION WITH KNX

KNX news

NEW MDT SAFETY MODULE

The new security module SCN-SAFE.01 prevents all ETS access to a KNX installation: such as programming and deprogramming of bus devices on the KNX line.

This significantly increases the security of the line and makes it completely protected. It is no longer possible to manipulate the programming of the devices. The safety function starts automatically after bus voltage recovery / programming of the safety module.

Deactivation of the safety function is possible depending on the set safety level via the device control buttons and/or with the safety password via telegrams.

The integrated device control system also allows up to 100 KNX devices to be monitored continuously. When a KNX device is missing or stops responding due to a defect, an alarm message is sent.

Events such as an unauthorized programming process or a missing bus device are indicated by an alarm LED on the device, sent as an alarm object and additionally stored as a time-stamped plain text message in the internal memory of the security module.

FEATURES:

• Increases the security of the protected line and protects against tampering.
• Easy to install in existing KNX installations
• Locks the connection and prevents programming and downloading of KNX devices inside the line
• The safety function starts automatically after bus voltage recovery and/or programming of the safety module
• The safety function can be temporarily deactivated by pressing the device button or with a 14-byte telegram
• Monitoring function for detection of a faulty device on the line
• Active or passive monitoring of up to 100 KNX devices
• Alarm is stored as a plain text message in the device's internal memory
• Fast download of applications (long-frame support for ETS5)
• Production in Germany, certified according to ISO 9001 standard
• 3 years warranty

Tweet

New 55 &63 series!
Push Button Smart 55 with colour display
The Push Button Smart 55 with colour display is available in following versions:
BE-TAS5504.01    Push Button Smart 55    4-fold with colour display, white glossy finish
BE-TAS55T4.01    Push Button Smart 55    4-fold with colour display, with temperature/humidity sensor

Description
The MDT Push Button Smart 55 releases KNX telegrams depending on the paramerization after pressing the buttons. The RGBW status LEDs can be controlled with internal or external objects. The LED brightness is controllable via day/night or brightness object. In addition to switching, dimming, blinds, scenes or sending values, a lot more functions are available. The Push Button Smart 55 has 4 integrated logic blocks.

FEATURES:
- Production in Germany certified according to ISO 9001
- Fits 55mm systems/ranges
- Active colour display for function and status indication
- Adjustable background colour of the display (white or black)
- Automatic display brightness via light sensor and day/night object
- Visualisation of indoor/outdoor temperature and time
- With temperature/humidity sensor for room temperature measurement (not BE-TAS5504.01)
- Additional functions for temperature setting and operation mode (not BE-TAS5504.01)
- New multi touch function, sends up to 4 values/DPTs
on the same or different objects
- Innovative group control with long/extra long button press
- 1 and 2 button operation for switching, dimming, shutters, values
- Symbols and plain text adjustable for each button/function
- Short/long button push and 2 objects
- Installation in an installation box with included support ring
- Recommended installation height: 1,05 - 1,20m
- No additional power supply required
- Integrated bus coupling unit
- 3 years warranty

Buy it here


Follow Futurasmus:
Youtube,
Vimeo,
Instagram,
Twitter,
Facebook,
Linkedin,
Google +.

For further information do not hesitate to contact us on the phone +34 965.95.95.11 or the email commercial@futurasmus-knxgroup.com

Tweet

Weinzierl presents the new actuator universal binary interface with two expansion modules

KNX IP Multi IO 580
The KNX IP Multi IO 580 is a universal binary interface for building control. It provides 48 I/O lines. Each line can be used as binary input as well as binary output. The peripherals can be fed by an external voltage of 24 V?. Channels which are configured as inputs can be used to control lights or blinds via the KNX network. They also can be used to count impulses, e.g. as interface for energy meters. Channels which are configured as outputs can directly drive signal LEDs, external coupling relays (e.g.Multi IO extension 590) or jalousie relays (Multi IO Extension 592).

The device works using the medium KNX IP. It can be configured using the ETS (Version 4.2 or higher) with native parameters and standard group objects. Also the KNX addressing scheme, based on individual device address and group objects, is unchanged. An easy to read OLED display on the front panel enables a manual operation to test the installation.

Multi IO Extension 590
The Multi IO Extension 590 serves as a power-saving alternative to commercial standard coupling relays. The coupling relay is controlled as a mono-stable relay, but uses a bi-stable relay internally, thus reducing the holding current by up to 95%.
The Multi IO Extension 590 has an integrated fuse to protect high-quality equipment.

Multi IO Extension 592
The Multi IO Extension 592 for shutter has been specially developed for the control of blinds and shutters. The double relay is connected to only one output of a KNX Multi IO 570 or 580. The direction control of the relay outputs is performed automatically by the KNX Multi IO by a defined voltage interruption of the holding current.

The outputs are electro-mechanically locked against each other to prevent a motor defect.

The Multi IO Extension 592 has an integrated fuse to protect high-quality equipment.


Read the technical data on the product pages:

KNX IP Multi IO 580 actuator universal binary interface for building control with 48 configurable In- and Outputs
Multi IO Extension 590 Module Relay
Multi IO Extension 592 blind shutter actuator module 1 channel

Watch Weinzierl news in the light+building HERE.

Follow Futurasmus:
Youtube,
Vimeo,
Instagram,
Twitter,
Facebook,
Linkedin,
Google +.

For further information do not hesitate to contact us on the phone +34 965.95.95.11 or the email commercial@futurasmus-knxgroup.com

Tweet

Take advantage of the special offer in DaliControl gateways by MDT, with a 12% additional discount until October 15th.

The DaliControl Gateway by MDT is the interface between DALI lights and the KNX installation and offers many new possibilities, such as the light control in the HSV color space.

This new MDT gateways are some of the few DALI gateways that have temperature control. There are available in two versions:

- DaliControl Gateway with HSV Control, 128 ECG, 32 channels
- DaliControl Gateway with HSV Control, 64 ECG, 16 cchannels

OFFER:

DaliControl Gateway with HSV Control, 64 ECG, 16 channels
DaliControl Gateway with HSV Control, 128 ECG, 32 channels

These are some of the characteristics of the gateways:

- Tunable White, color temperature control.
- Control of up to 16-32 channels / light groups (switching, dimming, and brightness value).
- Operation modes (normal, continuous, night, stairwell and panic).
- Manual operation for all the 16-32 groups.
- 16-32 scenes with individual dimming times.
- Innovative HSV color control RGB, RGBW and XY color according to Dali DT8 standard.
- Integrated color control module for at time dependent controlling of the luminous color in up to 300 steps.
- Fault detection of lamp faults and faulty ECG.
- Energy saving function for switching off the ECGs (via additional KNX switch actuator).
- Supports different DALI ECG.
- Quick Exchange of ECG.
- Free DCA app for commissioning the DALI bus system and configuration of the scenes and time control.
- Production in Germany certified according to ISO 9001.
- 3 years warranty.

Watch MDT news and products at the ligh+building HERE.

See the product pages in the Futurasmus web:
DALICONTROL GATEWAY 16 CHANNELS
DALICONTROL GATEWAY 32 CHANNELS

Follow Futurasmus:
Youtube,
Vimeo,
Instagram,
Twitter,
Facebook,
Linkedin,
Google +.

For further information do not hesitate to contact us on the phone +34 965.95.95.11 or the email commercial@futurasmus-knxgroup.com

Tweet

The DaliControl Gateway by MDT is the interface between DALI lights and the KNX installation and offers many new possibilities, such as the light control in the HSV color space.

This new MDT gateways are some of the few DALI gateways that have temperature control. There are available in two versions:

- DaliControl Gateway with HSV Control, 128 ECG, 32 channels
- DaliControl Gateway with HSV Control, 64 ECG, 16 cchannels

These are some of the characteristics of the gateways:

- Tunable White, color temperature control.
- Control of up to 16-32 channels / light groups (switching, dimming, and brightness value).
- Operation modes (normal, continuous, night, stairwell and panic).
- Manual operation for all the 16-32 groups.
- 16-32 scenes with individual dimming times.
- Innovative HSV color control RGB, RGBW and XY color according to Dali DT8 standard.
- Integrated color control module for at time dependent controlling of the luminous color in up to 300 steps.
- Fault detection of lamp faults and faulty ECG.
- Energy saving function for switching off the ECGs (via additional KNX switch actuator).
- Supports different DALI ECG.
- Quick Exchange of ECG.
- Free DCA app for commissioning the DALI bus system and configuration of the scenes and time control.
- Production in Germany certified according to ISO 9001.
- 3 years warranty.

Watch MDT news and products at the ligh+building HERE.

See the product pages in the Futurasmus web:
DALICONTROL GATEWAY 16 CHANNELS
DALICONTROL GATEWAY 32 CHANNELS

Follow Futurasmus:
Youtube,
Vimeo,
Instagram,
Twitter,
Facebook,
Linkedin,
Google +.

For further information do not hesitate to contact us on the phone +34 965.95.95.11 or the email commercial@futurasmus-knxgroup.com

Tweet