THE ALL-ROUND PARTNER FOR HOME AND BUILDING AUTOMATION WITH KNX

KNX news

We are happy to announce that Intesis HMS has achieved the DALI-2 Certification assured by “Digital Illumination Interface Alliance” (DiiA) for all its DALI gateways.

DALI 2 is no longer just a whim. Increasingly, it is a prerequisite included in most DALI offers today. So, now with the Intesis DALI 2 gateway you are no longer left out of the tenders, where this certification is required.

The novelties are:

- First DALI multi master KNX gateway on the market.
- It affects all its gateways: DALI V6 <-> KNXr, DALI V6 <-> Modbus and DALI V6 <-> BACnet in all its versions.: Press here to see all its versions.
- This Certification supports 2 types of DALI-2 sensors: occupancy sensors and lighting sensors.
- To obtain the Certification, they had to use a new Hardware, for which they have issued new references for all DALI models.

And the best news is that they are already available for sale!

Follow Futurasmus:
Youtube,
Vimeo,
Instagram,
Twitter,
Facebook,
Linkedin,
Google +.

For further information do not hesitate to contact us on the phone +34 965.95.95.11 or the email commercial@futurasmus-knxgroup.com

DALI 2 is not only a caprice anymore. Increasingly it is a pre-requisite included in most DALI tenders now a days. So, now with the Ipas DALI 2 gateway (*) you will not get “left out” anymore.

IPAS updates its DALI e64 Gateway, now joining the DALI consortium as a DALI 2 certified manufacturer

DALI 2 CERTIFIED MANUFACTURERS,

Among many other advantages, the new standard considerably improves interoperability between DALI 2 devices.

For this, and in order to have the DALI 2 seal or logo, IPAS has successfully passed the certification tests in the laboratories accredited by the DALI consortium.

(*) It doesn't support Multimaster

Follow Futurasmus:
Youtube,
Vimeo,
Instagram,
Twitter,
Facebook,
Linkedin,
Google +.

For further information do not hesitate to contact us on the phone +34 965.95.95.11 or the email commercial@futurasmus-knxgroup.com

Integrate any Modbus RTU slave device with any KNX device or system using ETS. The aim of this integration is to make accessible any Modbus registers data and resources from a KNX system, as if it was part of the own KNX system and vice-versa.

FEATURES

KNX Certified.
Support for Modbus RTU only (RS485).
Support for KNX TP.
Supports KNX standard datapoints (DPTs) that guarantees a seamless integration with any KNX device or system.
Operations for each signal to adapt Modbus register to demanding KNX installations: E.g. multiplication, division and equal to.
Reduced dimensions, compact housing.
Up to 100 Communication Objects.
Up to 255 Modbus Devices.
Easy integration & configuration with standard ETS database.

See product,

Follow Futurasmus:
Youtube,
Vimeo,
Instagram,
Twitter,
Facebook,
Linkedin,
Google +.

For further information do not hesitate to contact us on the phone +34 965.95.95.11 or the email commercial@futurasmus-knxgroup.com

Manufacturer Weizierl is worldwide known to be one of the most reputed developers of components for other KNX manufacturer and OEM provider. Now they have evolved into a brand with their own complete range of KNX devices.

We recommend you have a look at their new catalogue: you will be surprised about their variety of products.

Weinzierl stands out for their new KNX Secure product offer in the market.

You can download the new catalog Here,


You can contact us if you have any questions or special requests.

Follow Futurasmus:
Youtube,
Vimeo,
Instagram,
Twitter,
Facebook,
Linkedin,
Google +.

For further information do not hesitate to contact us on the phone +34 965.95.95.11 or the email commercial@futurasmus-knxgroup.com

• POWER BLOCK MULTI

The most innovative and complete actuators on the market, the POWER BLOCK, are renewed once again by now incorporating a powerful and complete FAN COIL controller (with up to 4xFC in the same actuator). The new version is called POWER BLOCK MULTI and has the same price as the previous model (which is also still available)

In addition to the already known functions in BINARY OUTPUTS / BLINDS / ADVANCED FUNCTIONS (more than 100 !!), the FAN COIL module allows the configuration of:

- Bus failure / recovery behavior
- Operating modes / restrictions for fan / valve
- Fan delay on power on, power off, forced ventilation, etc.
- Thermostat monitoring
- Additional cyclical ventilation, even with the Fan Coil turned off
- Multiple forms of fan control: 3x1 bit, 1 percentage byte, 1 unsigned byte, value customization, etc.
- Alarms
- Etc.

Now it is possible to quickly and directly control a FAN COIL unit for any type of scenario:

- Fan control from a simple KNX keypad with binary pulsations or from any web server, thermostat, etc ... without the need for complex logical functions to define special behaviours.
- Operating restrictions by time slots (e.g. limit fan speeds at night to avoid annoying noises)
- Delay the activation of the fan while the cold / hot water temperature in the pipes is reached, to avoid annoying drafts without air conditioning.
- MANUAL ventilation mode timing to return to AUTO mode after a defined time.
- Minimum maintaining times in each speed to avoid sudden changes in the fan speed.
- Turning off the fan while the valve is closed to reduce noise and achieve energy savings.
- Automatic purging of the valve to avoid calcifications during long periods without use.
- Automatic ventilation switching on only the fan to recirculate closed rooms and avoid accumulation of bad odours.
-Etc.…

*Just one unit per company.

Only until the 31st of April or while stock lasts. Please, send your orders to carlos@futurasmus.es with reference "PowerBlock Multi - Offer"

Follow Futurasmus:
Youtube,
Vimeo,
Instagram,
Twitter,
Facebook,
Linkedin,
Google +.

For further information do not hesitate to contact us on the phone +34 965.95.95.11 or the email commercial@futurasmus-knxgroup.com