T: +34 965 95 95 11 · E: info@futurasmus-knxgroup.com
select language flag

KNX news

27 DE SEPTIEMBRE DE 2017

NEW WEINZIERL PRODUCTS
Noticia

Weinzierl, the leading German software and hardware manufacturer for the building system technology based on KNX has launched two new products:


KNX POWER SUPPLY 640mA WITH USB INTERFACE

    The new 367 model is a 640 mA bus power supply with high efficiency and a small footprint of only 4 units (72 mm). The device has a bus choke, an integrated USB Interface (Micro USB connector) and additionally provides an output for auxiliary power.

    The USB interface allows establishing a bidirectional connection between a PC and the KNX bus. The USB connector has a galvanic separation from the KNX bus. Both ETS (Version 4.2 or later) and visualization tools support this interface.

    The KNX node monitors output current, bus voltage and the temperature in the enclosure. The configuration of the device is done with ETS. An easy to read OLED display on the front panel enables the user to display the operating parameters locally on the device.

    Check the product HERE.

INTERFAZ KNXnet/IP (5 tunneling connections)

    The new KNX IP Interface 731 is the successor of the well-tried KNX IP Interface 730. The new compact design has a width of only 1 module (18 mm) and is powered by the KNX bus.

    The device can be used as programming interface for ETS. You can access the KNX Bus from every point of your LAN. Furthermore, it allows you to program the KNX bus over the Internet. The IP address can be obtained by a DHCP server or by manual configuration (ETS) respectively. The buttons and LEDs on the device allow a local diagnosis including the operating status and communication errors.

    Check the product HERE.

For further information, please do not hesitate to contact us via telephone +34.965.95.95.11, e-mail commercial@futurasmus-knxgroup.com o check the ONLINE CATALOG.

linkedin share button

09 DE FEBRERO DE 2012

Houseinhand now available in Futurasmus KNX Group
Noticia
Houseinhand is an application for KNX installation control via iOS terminals (iPhone, iPad and iPod Touch). With a friendly and intuitive interface, it allows to control installation components in a very simple way:

· Lighting/Dimming
· Blind/Shutter
· RGB
· HVAC
· Generic controllers of 1 bit and 1 byte
· Weather stations
· Scenes
· IP cameras (Mobotix and Axis)
· Technical alarms
· Audiovisual control (requires IRTrans or Global Cache)
· Etc.

If we add a very competitive price to its great functionality and excellent aesthetics we get, without no doubt, one of the most interesting Apps for KNX control via iPhone/iPad/iPod Touch.

Starting today, you can acquire your Houseinhand license in Futurasmus KNX Group. Each iOS device needs an individual license. You can find out more about the different license types in our website.

For KNX Bus communication, it requires a KNXnet/IP Gateway. Depending on the number of simultaneous connections required, we recommend one of the following gateways:

· Weinzierl IP 730: 1 connection
· Weinzierl IP BAOS 771: 5 connections
linkedin share button