THE ALL-ROUND PARTNER FOR HOME AND BUILDING AUTOMATION WITH KNX

KNX news

• POWER BLOCK MULTI

The most innovative and complete actuators on the market, the POWER BLOCK, are renewed once again by now incorporating a powerful and complete FAN COIL controller (with up to 4xFC in the same actuator). The new version is called POWER BLOCK MULTI and has the same price as the previous model (which is also still available)

In addition to the already known functions in BINARY OUTPUTS / BLINDS / ADVANCED FUNCTIONS (more than 100 !!), the FAN COIL module allows the configuration of:

- Bus failure / recovery behavior
- Operating modes / restrictions for fan / valve
- Fan delay on power on, power off, forced ventilation, etc.
- Thermostat monitoring
- Additional cyclical ventilation, even with the Fan Coil turned off
- Multiple forms of fan control: 3x1 bit, 1 percentage byte, 1 unsigned byte, value customization, etc.
- Alarms
- Etc.

Now it is possible to quickly and directly control a FAN COIL unit for any type of scenario:

- Fan control from a simple KNX keypad with binary pulsations or from any web server, thermostat, etc ... without the need for complex logical functions to define special behaviours.
- Operating restrictions by time slots (e.g. limit fan speeds at night to avoid annoying noises)
- Delay the activation of the fan while the cold / hot water temperature in the pipes is reached, to avoid annoying drafts without air conditioning.
- MANUAL ventilation mode timing to return to AUTO mode after a defined time.
- Minimum maintaining times in each speed to avoid sudden changes in the fan speed.
- Turning off the fan while the valve is closed to reduce noise and achieve energy savings.
- Automatic purging of the valve to avoid calcifications during long periods without use.
- Automatic ventilation switching on only the fan to recirculate closed rooms and avoid accumulation of bad odours.
-Etc.…

*Just one unit per company.

Only until the 31st of April or while stock lasts. Please, send your orders to carlos@futurasmus.es with reference "PowerBlock Multi - Offer"

Follow Futurasmus:
Youtube,
Vimeo,
Instagram,
Twitter,
Facebook,
Linkedin,
Google +.

For further information do not hesitate to contact us on the phone +34 965.95.95.11 or the email commercial@futurasmus-knxgroup.com

Since 1996, when IPAS was established, has developed and manufactured innovative devices, as well as visualization and management software. Many integrators trust IPAS, not only in residential buildings, also in large projects such as airports, stadiums, luxury hotels and museums. As a result, IPAS offers a range of products that meet the requirements demanded by KNX professionals, as well as end-users.

We have selected a total of seven products from the extensive IPAS catalog, in order to offer you a special offer for the Light & Building 2018. PowerBlock actuators, μBrick, DALI gateways, KNXnet/IP gateways and the HCC web server are included.

Take advantage of the opportunity from up to a 20% additional discount* until June 30. You can check the products offered here:

4101-145-01 → Gateway DALI e64 (64 ECGs , 16 groups), web server
4101-145-11 → Gateway DaliControl gc16 (64 ECGs , 16 groups)
3622-141-11 → Visualization with web server Home Control Center (HCC 3.0)
3622-141-07-0B → Gateway CB NCI KNXnet/IP (5 tunelling connections), programming devices
3622-141-17 → Gateway CB IP-R KNXnet/IP Router (5 tunelling connections), 1 object server connection, programming devices
77024-180-01 → Multi-function actuator PowerBlock o8, 8 outputs 16A (8 On/Off or 4 shutter/blinds)
72130-180-11 → Blind actuator μBrick si36, 3 output channels and 6 inputs, máx. 10A resistive loads