THE ALL-ROUND PARTNER FOR HOME AND BUILDING AUTOMATION WITH KNX

KNX news

Discover the KNX bidirectional radiofrequency series from MDT, the definitive solution for places where the KNX TP (Twisted Pair) bus cable cannot be installed. Remember MDT offers robust and quality products, thus it is the only manufacturer that offers a 3 years warranty.

The KNX RF+ protocol is fully integrated within the KNX protocol and all devices can be commissioned from ETS. It perfectly fits in KNX TP systems, therefore, it is not only perfect for remodellings, also for any KNX installation (for places where KNX wiring has not been planned).

If you still do not know the RF+ Wireless products from MDT, to encourage you to try, we offer you an additional 20% OFF across the whole series, a special offer that cannot be missed.

The KNX RF+ solution offered by MDT consists of:

• Line coupler
  
• Universal interface
  
• Push buttons up to 8 folds
  
• Glass capacitve push buttons up to 8 folds (black or white)
  
• Shutter actuator
  
• Switch actuator up to 2 channels

Elsner launches a new design for the range of SEWI detectors, specifically the MINI-SEWI range with an ultra-reduced size about 51 cm diameter, less than double as 2€ coin.

The complete range is composed of the temperature sensor MINI-SEWI KNX T (Web Code: 19053), the temperature and humidity sensor (with dew point) MINI-SEWI KNX TH (Web Code: 19054), and the presence temperature and humidity sensor (with dew point) MINI-SEWI KNX TH-Pr (Web Code: 19055).

Here we show you the main features:

• Temperature measure. Mixed value calculation (communication object for external values).
  
• PI controller for heating/cooling.
  
• Humidity measure (relative and absolute). Mixed value calculation (communication object for external values).
  
• Dew point calculation.
  
• PI regulator for ventilation control (humidification/dehumidification).
  
• Motion detector.
  
• Thresholds values can be adjusted by parameters or via communication objects.
  
• 4 AND and 4 OR logic gates, each with 4 inputs. Possibility to use external variables by communication object.
  
• 2 comparators.

Discover the KNX bidirectional radiofrequency series from MDT, the definitive solution for places where the KNX TP (Twisted Pair) bus cable cannot be installed. Remember MDT offers robust and quality products, thus it is the only manufacturer that offers a 3 years warranty.

The KNX RF+ protocol is fully integrated within the KNX protocol and all devices can be commissioned from ETS. It perfectly fits in KNX TP systems, therefore, it is not only perfect for remodellings, also for any KNX installation (for places where KNX wiring has not been planned).

If you still do not know the RF+ Wireless products from MDT, to encourage you to try, we offer you an additional 20% OFF across the whole series, a special offer that cannot be missed.

The KNX RF+ solution offered by MDT consists of:

• Line coupler
  
• Universal interface
  
• Push buttons up to 8 folds
  
• Glass capacitve push buttons up to 8 folds (black or white)
  
• Shutter actuator
  
• Switch actuator up to 2 channels

Elsner launches a new design for the range of SEWI detectors, specifically the MINI-SEWI range with an ultra-reduced size about 51 cm diameter, less than double as 2€ coin.

The complete range is composed of the temperature sensor MINI-SEWI KNX T (Web Code: 19053), the temperature and humidity sensor (with dew point) MINI-SEWI KNX TH (Web Code: 19054), and the presence temperature and humidity sensor (with dew point) MINI-SEWI KNX TH-Pr (Web Code: 19055).

Here we show you the main features:

• Temperature measure. Mixed value calculation (communication object for external values).
  
• PI controller for heating/cooling.
  
• Humidity measure (relative and absolute). Mixed value calculation (communication object for external values).
  
• Dew point calculation.
  
• PI regulator for ventilation control (humidification/dehumidification).
  
• Motion detector.
  
• Thresholds values can be adjusted by parameters or via communication objects.
  
• 4 AND and 4 OR logic gates, each with 4 inputs. Possibility to use external variables by communication object.
  
• 2 comparators.

Now available the new firmware and configuration software (3.3) for the Iddero HCx-KNX touch panels and Iddero Home Server.

This release introduces the following news:

• Support for SIP registration
  
• Video Intercom improvements (more options for generic video intercoms)
  
• Compatibility with By-Me devices from Vimar
  
• More robust idderocloud linking protocol
  
• DHCP behaviour improvements when there is no DHCP server available at start-up
  
• Other minor modifications

Firmware HCx-KNX Touch Panels
Firmware Home Server
Configuration Software