KNX ARGUS Presence Basic
Presence detection indoors.
If KNX ARGUS Presence detects smaller movements
in the room, data telegrams are transmitted
via KNX to control the lighting, blind or
heating at the same time.
When the lighting is controlled by brightnessdependent
movement detection, the device constantly
monitors the brightness in the room. If
sufficient natural light is at hand, the device
switches the artificial light off even if a person is
present. The overshoot time can be adjusted
using the ETS.
With integrated bus coupling unit. For ceiling
mounting in a size 60 mounting box, optimal
installation at 2.5 m. Can also be mounted to
ceilings using the surface mounting housing for
ARGUS Presence.
KNX software functions:
Two movement/presence blocks: up to four functions
can be triggered per block. Telegrams: 1 bit,
1 byte, 2 bytes.
Normal operation (no master/slave), safety
pause, disable function. Self-adjusting staircase
timer. Actual brightness value: can be specified
via the internal and/or an external light sensor.
Angle of detection: 360°
Range: a radius of max. 7 m (at a mounting
height of 2.50 m)
Number of levels: 6
Number of zones: 136 with 544 switching segments
Number of movement sensors: 4
Light sensor: internal light sensor infinitely
adjustable from approx. 10 to 2000 Lux (ETS);
external light sensor via KNX
EC Directives: Low-voltage guideline 73/23/EEC
and EMC guideline 89/336/EEC
~ Accessories: Surface-mounted housing for ARGUS Presence, art.
no. 550619.
- Contents: With bus connecting terminal and supporting plate.