|
Manufacturer:
|
Siemens |
|
Reference 1:
|
5WG1 511-2AB10 |
|
Reference 2:
|
|
|
Series:
|
|
|
Colour:
|
- |
|
P.G.:
|
A21 |
|
Weight:
|
0,095 Kg. |
|
Web Code: 8442
Switch actuator 1x AC 230 V, 16 A; 2x binary input, potential-free
List Price:
Log in to view prices
* Ask our commercial agents about your discount
DOWNLOADS
ETS Application Program
Manufacturer ETS Database
DESCRIPTION
with one relay contact per output as switching element,
rated operating voltage of relay contact: 230V AC,
rated current of relay contact: 16A, cos phi = 1,
with integrated power supply for the electronics, connected to 230V AC,
with push button to switch between bus operation and direct operation,
with yellow LED to indicate direct operation activated,
with 1 red LED per output to indicate the switching state,
with one push button per output to switch the output via a toggling function in direct operation mode, functional if 230V AC present, (even if bus voltage absent or interrupted or bus communication not yet activated),
with selection whether outputs are to be configured identically or individually,
with operation mode selectable for each output (normal mode, time switch mode),
with selectable switching behaviour for each output (NO contact/NC contact),
with adjustable On and Off delay times,
with selectable logic operation (AND/OR) for two communication objects and variable start value of the logic operation at bus voltage recovery,
with selectable additional night mode object for each output for time-limited switching on of the illumination at night,
with adjustable On period for night or time switch operation mode,
with selectable warning signal prior to imminent switching-off by means of three-times short off and on switching (flashing) at night or time switch operation mode,
with possibility to add one additional status indication object per output for status reporting,
with sending of status objects on request and/or automatically after a change,
with integrated 8-bit scene control and linking of each output into up to 8 scenes,
with unchanged switching state of all outputs if there is a power failure,
with adjustable switching state per output after mains voltage recovery,
with integrated bus coupling unit,
with bus connection both via bus terminal and contact system to a data rail,
only half a standard bus load,
as rail-mounted device for mounting on rail TH 35 according to DIN EN 60715,
max. module width 8 MU (1 MU = 18 mm).
|
