KNX News
Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43
10 / DECEMBER / 2018
IPAS OFFER: NEW POWERBLOCK io64 23% OFF ADDITIONAL TO THE USUAL DISCOUNT
Noticia

Take advantage of this opportunity: An addtional 23% discount to your usual discount on IPAS PowerBlock io64 just until December 31th.

Know more about the PowerBlock io64 here:



OFFER:

The range of Power Block actuators is composed of 3 different actuators.
• 4 capacitive 16A channels (140 µF) / 6 bin./analog inputs. and 4U DIN
• 8 capacitive 16A channels (140 µF) and 4U DIN
• 16 capacitive 16A channels (140 µF) and 8U DIN

POWER BLOCK io64

6 BINARY / ANALOG INPUTS:
• Value transfer with manual operation
• Supervision of inputs with end of line resistance
• Doubling of entries, up to 12 ent. independent binaries
• Conventional motion detectors
• Thermometers
• Window contacts
• Etc.

SHUTTER CHANNELS:
• Real positioning of the blind
• Slit control
• Control of facades
• Central functions Up / Down
• Limits, Scenes, Presets, Alarms, Disable functions, manual control, etc.

BINARY OUTPUTS:
• Outputs with independent phases
• Operating hours counter (asc./desc.)
• Switch counter (asc./desc.)
• KNX scenes with delay between events
• Timings
• Disable, Analog / digital alarms
• Etc.

ADVANCED INDEPENDENT FUNCTIONS (MORE THAN 100!!):
• Timers with cyclical remaining time sending
• Logical functions (Booleans, comparators, mathematics, filters, gates, DPT converters, etc ...)
• KNX scenes with delays between events
• Setpoints
• Analog and digital alarms
• Overwriting user parameters
• Saving all the variables to bus voltage failure
• Etc.

Follow Futurasmus:
Youtube,
Vimeo,
Instagram,
Twitter,
Facebook,
Linkedin,
Google +.

For further information do not hesitate to contact us on the phone +34 965.95.95.11 or the email commercial@futurasmus-knxgroup.com

* Offer available for orders until December 31th.
** Only one unit per customer. Ask our sales department.

  linkedin share button  

23 / NOVEMBER / 2018
DISCOVER INTERRA'S KNX WATER FLOOD DETECTOR
Noticia

Interra presents the new KNX water flood detector.

This detector is available with a recommended less price of 40'00€.

Flood detectors are used to detect the accumulating water as a result of punctured pipes, wet spots or sewage leaks, etc. Device designed to give visual and audible warning after detection, it also transmits the warning signal to the system as KNX or dry contact.

Interra flood detectors, which are considered essential for safety and protection, stand out with their rapid communication and design that can be applied to every floor.

Read the technical data on the product page or on the offer:

OFFER:



Watch Interra news in the light+building HERE.

Follow Futurasmus:
Youtube,
Vimeo,
Instagram,
Twitter,
Facebook,
Linkedin,
Google +.

For further information do not hesitate to contact us on the phone +34 965.95.95.11 or the email commercial@futurasmus-knxgroup.com

  linkedin share button  

19 / NOVEMBER / 2018
WEINZIERL PRESENTS THE NEW ACTUATOR UNIVERSAL BINARY INTERFACE WITH TWO EXPANSION MODULE
Noticia

Weinzierl presents the new actuator universal binary interface with two expansion modules

KNX IP Multi IO 580
The KNX IP Multi IO 580 is a universal binary interface for building control. It provides 48 I/O lines. Each line can be used as binary input as well as binary output. The peripherals can be fed by an external voltage of 24 V?. Channels which are configured as inputs can be used to control lights or blinds via the KNX network. They also can be used to count impulses, e.g. as interface for energy meters. Channels which are configured as outputs can directly drive signal LEDs, external coupling relays (e.g.Multi IO extension 590) or jalousie relays (Multi IO Extension 592).

The device works using the medium KNX IP. It can be configured using the ETS (Version 4.2 or higher) with native parameters and standard group objects. Also the KNX addressing scheme, based on individual device address and group objects, is unchanged. An easy to read OLED display on the front panel enables a manual operation to test the installation.

Multi IO Extension 590
The Multi IO Extension 590 serves as a power-saving alternative to commercial standard coupling relays. The coupling relay is controlled as a mono-stable relay, but uses a bi-stable relay internally, thus reducing the holding current by up to 95%.
The Multi IO Extension 590 has an integrated fuse to protect high-quality equipment.

Multi IO Extension 592
The Multi IO Extension 592 for shutter has been specially developed for the control of blinds and shutters. The double relay is connected to only one output of a KNX Multi IO 570 or 580. The direction control of the relay outputs is performed automatically by the KNX Multi IO by a defined voltage interruption of the holding current.

The outputs are electro-mechanically locked against each other to prevent a motor defect.

The Multi IO Extension 592 has an integrated fuse to protect high-quality equipment.


Read the technical data on the product pages:

KNX IP Multi IO 580 actuator universal binary interface for building control with 48 configurable In- and Outputs
Multi IO Extension 590 Module Relay
Multi IO Extension 592 blind shutter actuator module 1 channel

Watch Weinzierl news in the light+building HERE.

Follow Futurasmus:
Youtube,
Vimeo,
Instagram,
Twitter,
Facebook,
Linkedin,
Google +.

For further information do not hesitate to contact us on the phone +34 965.95.95.11 or the email commercial@futurasmus-knxgroup.com


  linkedin share button  

18 / OCTOBER / 2018
KAMSTRUP KNX ULTRASONIC HEAT AND COOLING METER WITH SMART MEETERING BY LINGG & JANKE
Noticia

We introduce you the new Kamstrup KNX ultrasonic heat meter Multical 403 with Smart Meetering by Lingg & Janke.

The format of this hot water meter is new: The temperature range of the MULTICAL® 403 is from 15 to 130°C, so it's not just for hot, but also for cold.

Remote re-configuration and long-time accuracy
Imagine that utilities’ heat meters can be configured with new settings adjusted to the current needs – without logistical challenges and direct access to the meters and without legal registers, meter readings or network control being affected.

Imagine, that the meter’s log can be read in order for abnormal consumption patterns to be investigated – without having to disturb the customer unnecessarily.

With the new built-in 2-way communication in MULTICAL® 403 and a READY remote reading system, it is now possible to perform remote configuration of the meters and reading of the log without direct access to the installation.

Discover the possibilities within flexible and easy remote configuration of heat meters – for less hassle for both the utility and the consumer.

Flexibility and longtime accuracy
Now, you only need to keep one meter in stock. With MULTICAL® 403 everything from inlet/outlet position to energy unit, cut-off dates and much more can be configured individually via the meter’s front panel directly at the installation site.

This allows you to keep a low stock and save resources previously spent on planning.

Full flexibility
MULTICAL® 403 can be fitted with a selection of advanced communication modules. Kamstrup offers modules with Modbus, BACnet, M-bus, wireless M-bus and analogue outputs. By combining the meter’s very fast integration time and the modules’ optimised power consumption, you gain access to updated and very frequent meter data. By using M-Bus, the meter obtains a battery lifetime of up to 16 years with meter readings via the module every 10 seconds.

You can upgrade through separate software updates for the meter and module respectively as new possibilities and challenges occur without interfering with legal registers.


Read about the Lingg & Janke's Smart Meetering HERE.


Watch the product and download the datasheet, documents and application program here:
KAM-MC403 Kamstrup KNX ultrasonic heat an cooling meter Multical 403. 15 m³/h DN50 270mm flange 15-130°C


Follow Futurasmus:
Youtube,
Vimeo,
Instagram,
Twitter,
Facebook,
Linkedin,
Google +.

For further information do not hesitate to contact us on the phone +34 965.95.95.11 or the email commercial@futurasmus-knxgroup.com


  linkedin share button  

10 / OCTOBER / 2018
IDDERO MOBILE: NEW VERSO+IP APP
Noticia

Iddero has just announced the new Iddero Mobile app which lets users control their VERSO+IP touch panels from smartphones and tablets.

The VERSO+IP is an evolution from the popular Iddero Verso 4,3” capacitive touch panel. The new model retains the elegant design, attractive visualisation, and advanced functionality of its predecessor, and adds an Ethernet port for IP connectivity. The VERSO+IP is available in white or black finish, and can be installed in portrait or landscape mode, either surface-mounted (on standard square or rounded wall mount boxes) or flush-mounted, using Iddero's E-F401 mounting adapter.

The Iddero Mobile app lets users control their VERSO+IP from smartphones and tablets. Both direct (LAN) connection and cloud-based operation are supported. No additional configuration is required: there is no need to worry about fixed IP addresses, dynamic DNS services, port forwarding, etc. The app automatically detects whether it can connect to the VERSO+IP directly over the home LAN; otherwise, it switches over to the cloud-based access service.

Setup of the Iddero Mobile app is straightforward. Users simply need to scan a QR code displayed by the VERSO+IP. The device is then linked to the user's idderocloud account, and will show up automatically on any smartphone or tablet where the user logs in; there is no need to repeat the linking procedure for every smartphone or tablet. Of course, as many devices as required can be linked to the same account.

The Iddero Mobile app closely mimics the user interface of the VERSO+IP, so no additional learning is required. Push notifications are supported and allow users to get notified immediately if an alarm is triggered, even if they are not actively using the app.

Needless to say, all communications are fully encrypted according to the latest security standards and recommendations.

The Iddero Mobile app is available now for Android devices through Google Play. An iOS version is under development and will be available soon.

To know more about the Iddero VERSO IP Room controller enter here.

Watch the product and download the datasheet and the application program here:
Iddero VERSO IP Room controller with 4.3 "capacitive touch screen and IP connectivity


Follow Futurasmus:
Youtube,
Vimeo,
Instagram,
Twitter,
Facebook,
Linkedin,
Google +.

For further information do not hesitate to contact us on the phone +34 965.95.95.11 or the email commercial@futurasmus-knxgroup.com


  linkedin share button  

Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43


KNX SPECIAL CATALOGUES
Different looks for KNX push buttons
Push buttons
Smart metering
MDT Catalog 2017
Iddero Verso Interactive Presentation

LEARN
Free webinars
uBrick Tutorials
VideoTutorials CBSE


PARTICIPATE
µBrick Trivia
KNX Tips & tricks
TEST
Free test of CBSE visualization

LATEST KNX NEWS
All news

LATEST KNX OFFERS
All offers
DOWNLOADS
KNX - All brands

FUTURASMUS KNX GROUP
Contact
Location
Futurasmus in the world
FOLLOW US
YouTube Channel
Facebook
LinkedIN
Google+
Twitter

KNX++ TRAINING CENTER
Futurasmus Zentrum

CERTIFIED KNX TEST LAB
Futurasmus KNX Lab
SPECIALIZED KNX WHOLESALER CERTIFIED KNX TRAINING CENTRE
Futurasmus KNX Group is a highly specialized and internationally active KNX Wholesaler, being our forte the excellent technical support we provide. You can visit our online catalogue in this website and, if you are a professional, ask for a non binding offer for your KNX projects. Should you be interested in buying KNX components, you are welcome to read our General Sales Conditions and contact our technicians and commercial agents per telephone, e-mail or online help. Since 2003 we have been a Certified Training Centre KNX++, which means that we are entitled to impart the KNX Basic Course as well as the KNX Advanced Course and KNX Tutor Course. We are manufacturer-independent and also offer other specialized and monographic KNX seminars. After teaching more than 1.500 KNX partners, our KNX Trainers have quite a large and positive expertise. Please, contact us for customized KNX training worldwide (groups of at least 8 people) at training@futurasmus-knxgroup.org
USE OF COOKIES
We use our own and third-party cookies, analyzing your browsing habits in out website, with the finality of ensuring the quality, security and improvement of the offered services through the same. In the case that the user does not explicitly state whether to accept the installation of cookies, but continues using our website, it will mean that he has consented expressly, informing him about the possibility to block or remove the installed cookies on his computer by configuring the appropriate settings of the browser. You can get more information on this subject reading our "Cookies Policy".