Actuator and regulator 0-10V KNX with 4 channels.
Programmable scenes and time functions.
Format to install on Din lane.
Self-powered bux KNX (21-31V)
Input consumption <250mW.
4 relay outputs of 10 Amps per channel and 4 outputs 0-10V.
Maximum capacitive load per 220µF output.
Relay voltage 230Vac 50Hz.
Maximum total output current 40A.
Mechanical operating life> 106.
Linear or logarithmic regulation curve programmable with ETS software.
Function of time and programmable scenes.
Button for individual address programming.
Working temperature: from -30ºC to + 45ºC ambient temperature.
Dimensions (Width x Height x Depth): 72 x 90 x 57mm. 4U Din Rail width
The KAA is a 4-channel actuator (relays) for all types of inductive or capacitive loads such as motors and blinds. Ideal for intelligent building control, automation, lighting, blinds, heating. Also, how many with 4 0-10V analog outputs that allows to regulate any driver that supports a 0-10V signal. If the equipment does not allow output shutdown by regulation (equipment 1-10V) we can use the relay outputs to disconnect the power supply of said equipment.
Suitable for all types of MEAN WELL LED controllers. In the technical sheet of the product, it indicates the maximum number of recommended LED drivers per channel, which facilitates the planning of the building.
The linear or logarithmic regulation curve is programmable through the ETS software during planning or use. It also has a manual option via push button on the panel. You can program the time and scene functions. It incorporates an LED indicator for each channel. With a compact design for installation in the DIN rail frame with a width of only 4 units 72mm. Suitable for EIB and KNX panels
solutions.
Actuador y regulador 0-10V KNX de 4 canales.
Funciones de escenas y tiempo programables.
Formato para instalar sobre carril Din.
Autoalimentado del bux KNX (21-31V)
Consumo de entrada <250mW.
4 salidas de relé de 10 Amperios por canal y 4 salidas 0-10V.
Máxima carga capacitiva por salida 220µF.
Tensión de relé 230Vca 50Hz.
Corriente máxima total de salida 40A.
Vida mecánica de funcionamiento >106.
Curva de regulación lineal o logaritmica programable con software ETS.
Función de tiempo y escenas programables.
Botón para programación individial de direcciones.
Temperatura de trabajo: desde -30ºC hasta +45ºC de temperatura ambiente.
Dimensiones (Ancho x Alto x Fondo): 72 x 90 x 57mm. 4U de Ancho de carril Din.
El KAA es un actuador de 4 canales (relés) para todo tipo de cargas inductivas o capacitivas como motores y persianas. Ideal para control de edificios inteligentes, automatización, iluminación, persianas, calefacción. Además, cuanta con 4 salidas analógicas de 0-10V que permite regular cualquier driver que admita una señal 0-10V. Si los equipos no permiten el apagado de salida mediante la regulación (equipos 1-10V) podemos usar las salidas de relé para desconectar la alimentación de dichos equipos.
Adecuado para todo tipo de controladores LED de MEAN WELL. En la ficha técnica del producto nos indica el número máximo de LED drivers recomendados por canal, lo que nos facilita la planificación del edificio.
La curva de regulación lineal o logarítmica es programable a través del software ETS durante la planificación o el uso. También tiene una opción manual a través de pulsador en el panel. Se pueden programar las funciones de tiempo y escenas. Incorpora un indicador LED por cada canal. Con un diseño compacto para la instalación en el cuadro de carril DIN con un ancho de solo 4 unidades 72mm. Adecuado para paneles EIB y KNX
Actuator and regulator 0-10V KNX with 4 channels.
Programmable scenes and time functions.
Format to install on Din lane.
Self-powered bux KNX (21-31V)
Input consumption <250mW.
4 relay outputs of 10 Amps per channel and 4 outputs 0-10V.
Maximum capacitive load per 220µF output.
Relay voltage 230Vac 50Hz.
Maximum total output current 40A.
Mechanical operating life> 106.
Linear or logarithmic regulation curve programmable with ETS software.
Function of time and programmable scenes.
Button for individual address programming.
Working temperature: from -30ºC to + 45ºC ambient temperature.
Dimensions (Width x Height x Depth): 72 x 90 x 57mm. 4U Din Rail width
The KAA is a 4-channel actuator (relays) for all types of inductive or capacitive loads such as motors and blinds. Ideal for intelligent building control, automation, lighting, blinds, heating. Also, how many with 4 0-10V analog outputs that allows to regulate any driver that supports a 0-10V signal. If the equipment does not allow output shutdown by regulation (equipment 1-10V) we can use the relay outputs to disconnect the power supply of said equipment.
Suitable for all types of MEAN WELL LED controllers. In the technical sheet of the product, it indicates the maximum number of recommended LED drivers per channel, which facilitates the planning of the building.
The linear or logarithmic regulation curve is programmable through the ETS software during planning or use. It also has a manual option via push button on the panel. You can program the time and scene functions. It incorporates an LED indicator for each channel. With a compact design for installation in the DIN rail frame with a width of only 4 units 72mm. Suitable for EIB and KNX panels
solutions.
Aktor und Regler 0-10V KNX mit 4 Kanälen.
Programmierbare Szenen und Zeitfunktionen.
Format für die Installation auf Din Lane.
Bux KNX mit eigener Stromversorgung (21-31V)
Leistungsaufnahme <250mW.
4 Relaisausgänge mit 10 Ampere pro Kanal und 4 Ausgänge 0-10V.
Maximale kapazitive Last pro 220µF Ausgang.
Relaisspannung 230Vac 50Hz.
Maximaler Gesamtausgangsstrom 40A.
Mechanische Lebensdauer> 106.
Mit der ETS-Software programmierbare lineare oder logarithmische Regelkurve.
Zeitfunktion und programmierbare Szenen.
Taste zur individuellen Adressprogrammierung.
Arbeitstemperatur: von -30ºC bis + 45ºC Umgebungstemperatur.
Abmessungen (Breite x Höhe x Tiefe): 72 x 90 x 57 mm. 4HE DIN-Schienenbreite
Der KAA ist ein 4-Kanal-Aktor (Relais) für alle Arten von induktiven oder kapazitiven Lasten wie Motoren und Jalousien. Ideal für intelligente Gebäudesteuerung, Automatisierung, Beleuchtung, Jalousien, Heizung. Außerdem, wie viele mit 4 0-10V-Analogausgängen, die es ermöglichen, jeden Treiber zu regeln, der ein 0-10V-Signal unterstützt. Wenn das Gerät keine reguläre Ausgangsabschaltung zulässt (Gerät 1-10 V), können wir die Relaisausgänge verwenden, um die Stromversorgung des Geräts zu unterbrechen.
Geeignet für alle Arten von MEAN WELL LED-Controllern. Im technischen Datenblatt des Produkts wird die maximale Anzahl empfohlener LED-Treiber pro Kanal angegeben, was die Planung des Gebäudes erleichtert.
Die lineare oder logarithmische Regelkurve kann während der Planung oder Verwendung über die ETS-Software programmiert werden. Es gibt auch eine manuelle Option über einen Druckknopf auf dem Bedienfeld. Sie können die Zeit- und Szenenfunktionen programmieren. Es enthält eine LED-Anzeige für jeden Kanal. Mit kompakter Bauform zum Einbau in den Tragschienenrahmen mit einer Breite von nur 4 Einheiten 72mm. Geeignet für EIB- und KNX-Panels