T: +34 965 95 95 11 · E: info@futurasmus-knxgroup.com
select language flag

KNX news

19 DE NOVIEMBRE DE 2018

WEINZIERL PRESENTS THE NEW ACTUATOR UNIVERSAL BINARY INTERFACE WITH TWO EXPANSION MODULE
Noticia

Weinzierl presents the new actuator universal binary interface with two expansion modules

KNX IP Multi IO 580
The KNX IP Multi IO 580 is a universal binary interface for building control. It provides 48 I/O lines. Each line can be used as binary input as well as binary output. The peripherals can be fed by an external voltage of 24 V?. Channels which are configured as inputs can be used to control lights or blinds via the KNX network. They also can be used to count impulses, e.g. as interface for energy meters. Channels which are configured as outputs can directly drive signal LEDs, external coupling relays (e.g.Multi IO extension 590) or jalousie relays (Multi IO Extension 592).

The device works using the medium KNX IP. It can be configured using the ETS (Version 4.2 or higher) with native parameters and standard group objects. Also the KNX addressing scheme, based on individual device address and group objects, is unchanged. An easy to read OLED display on the front panel enables a manual operation to test the installation.

Multi IO Extension 590
The Multi IO Extension 590 serves as a power-saving alternative to commercial standard coupling relays. The coupling relay is controlled as a mono-stable relay, but uses a bi-stable relay internally, thus reducing the holding current by up to 95%.
The Multi IO Extension 590 has an integrated fuse to protect high-quality equipment.

Multi IO Extension 592
The Multi IO Extension 592 for shutter has been specially developed for the control of blinds and shutters. The double relay is connected to only one output of a KNX Multi IO 570 or 580. The direction control of the relay outputs is performed automatically by the KNX Multi IO by a defined voltage interruption of the holding current.

The outputs are electro-mechanically locked against each other to prevent a motor defect.

The Multi IO Extension 592 has an integrated fuse to protect high-quality equipment.


Read the technical data on the product pages:

KNX IP Multi IO 580 actuator universal binary interface for building control with 48 configurable In- and Outputs
Multi IO Extension 590 Module Relay
Multi IO Extension 592 blind shutter actuator module 1 channel

Watch Weinzierl news in the light+building HERE.

Follow Futurasmus:
Youtube,
Vimeo,
Instagram,
Twitter,
Facebook,
Linkedin,
Google +.

For further information do not hesitate to contact us on the phone +34 965.95.95.11 or the email commercial@futurasmus-knxgroup.com

linkedin share button