THE ALL-ROUND PARTNER FOR HOME AND BUILDING AUTOMATION WITH KNX

KNX news

We introduce you the new Kamstrup KNX ultrasonic heat meter Multical 403 with Smart Meetering by Lingg & Janke.

The format of this hot water meter is new: The temperature range of the MULTICAL® 403 is from 15 to 130°C, so it's not just for hot, but also for cold.

Remote re-configuration and long-time accuracy
Imagine that utilities’ heat meters can be configured with new settings adjusted to the current needs – without logistical challenges and direct access to the meters and without legal registers, meter readings or network control being affected.

Imagine, that the meter’s log can be read in order for abnormal consumption patterns to be investigated – without having to disturb the customer unnecessarily.

With the new built-in 2-way communication in MULTICAL® 403 and a READY remote reading system, it is now possible to perform remote configuration of the meters and reading of the log without direct access to the installation.

Discover the possibilities within flexible and easy remote configuration of heat meters – for less hassle for both the utility and the consumer.

Flexibility and longtime accuracy
Now, you only need to keep one meter in stock. With MULTICAL® 403 everything from inlet/outlet position to energy unit, cut-off dates and much more can be configured individually via the meter’s front panel directly at the installation site.

This allows you to keep a low stock and save resources previously spent on planning.

Full flexibility
MULTICAL® 403 can be fitted with a selection of advanced communication modules. Kamstrup offers modules with Modbus, BACnet, M-bus, wireless M-bus and analogue outputs. By combining the meter’s very fast integration time and the modules’ optimised power consumption, you gain access to updated and very frequent meter data. By using M-Bus, the meter obtains a battery lifetime of up to 16 years with meter readings via the module every 10 seconds.

You can upgrade through separate software updates for the meter and module respectively as new possibilities and challenges occur without interfering with legal registers.


Read about the Lingg & Janke's Smart Meetering HERE.


Watch the product and download the datasheet, documents and application program here:
KAM-MC403 Kamstrup KNX ultrasonic heat an cooling meter Multical 403. 15 m³/h DN50 270mm flange 15-130°C


Follow Futurasmus:
Youtube,
Vimeo,
Instagram,
Twitter,
Facebook,
Linkedin,
Google +.

For further information do not hesitate to contact us on the phone +34 965.95.95.11 or the email commercial@futurasmus-knxgroup.com

Tweet

Take the opportunity and benefit from an additional 16% discount* until September 30th.

Free, is milled from a single block of solid aluminium with special surface finishing. Visually, it seems to float in front of the wall. The open, asymmetrical form stands for minimalism, simplicity and elegance. The premium iPad holder for design lovers.

Easy remove and locking
Place the iPad in free and remove it at any time – even with just one hand. You stay flexible and mobile. free’s unique form makes connecting the iPad to the lightning adapter practically automatic. The soft felt covering protects the surface. Should your iPad require heightened protection, it can be secured with a lock and key system to protect against theft.

Charging the iPad
Your iPad is charged quickly and reliably in viveroo free. Thanks to a special power supply, the recharging feature treats the iPad’s battery with care – even though continuous charging. Your iPad is always ready for action.

Network connection
Free can be equipped with an ethernet adapter connecting the iPad to the network. For fast and reliable data transfer. Our docking station is perfect for secure and effective use as a control center and at work.

Free stands for quality you can feel, sustainable materials and excellent workmanship – made in Germany. The sturdy aluminum frame is cut right where viveroo is at home – in East Westphalia, Germany.

viveroo free flex
Your iPad, right where you need it: At your desk, in the living room or in the kitchen –a highlight in every setting.
For lovers of mobility and everyone who values high-quality design and intelligent technology.

Easy remove and locking
Place the iPad in free and remove it at any time – even with just one hand. You stay flexible and mobile. The perfect fit ensures that the iPad is charged reliably.
Soft felt covering protects the surface.
Should your iPad require heightened protection, it can be secured with a lock and key system to protect against theft.

Maximum Flexibility
With the special rotating joint in our premium docking station, the iPad can be rotated 360 degrees, tilted up to 180 degrees – and viewed from the perfect angle.
What’s more, you can choose between vertical and horizontal formats. Simply intelligent.

Watch the promotional video of free flex HERE.

    FREE FRAME IPAD PRO 12.9 SUPERSILVER

FREE FRAME iPad Pro 12.9 BLACK

FREE FRAME IPAD PRO 10,5“ (AB 2017) SUPERSILVER

FREE FRAME IPAD PRO 10,5“ (AB 2017) BLACK

FRAME FOR IPAD PRO 9.7“ & IPAD AIR 2 SuperSilver

FRAME FOR IPAD PRO 9.7“ & IPAD AIR 2 Black

FRAME IPAD MINI 4 (FROM 2015) SuperSilver

FRAME IPAD MINI 4 (FROM 2015) Black

FREE FLEX FOR DIRECT CONNECTION WITH SCREW BASE IPAD PRO 12.9 INCH (FROM 2015) SuperSilver

FREE FLEX FOR DIRECT CONNECTION WITH SCREW BASE IPAD PRO 12.9 INCH (FROM 2015) Black

    
FREE FLEX FOR DIRECT CONNECTION WITH SCREW BASE IPAD PRO 10.5 INCH (FROM 2015) SuperSilver

    
FREE FLEX FOR DIRECT CONNECTION WITH SCREW BASE IPAD PRO 10.5 INCH (FROM 2015) Black

    
FREE FLEX FOR DIRECT CONNECTION WITH SCREW BASE IPAD AIR (FROM 2013) IPAD (FROM MARCH 2017) SuperSilver

    
FREE FLEX FOR DIRECT CONNECTION WITH SCREW BASE IPAD AIR (FROM 2013) IPAD (FROM MARCH 2017) Black

FREE FLEX WITH PEDESTAL IPAD PRO 12.9 INCH (FROM 2015) SuperSilver

FREE FLEX WITH PEDESTAL IPAD PRO 12.9 INCH (FROM 2015) Black

FREE FLEX WITH PEDESTAL IPAD PRO 10.5 INCH (FROM 2017) SuperSilver

FREE FLEX WITH PEDESTAL IPAD PRO 10.5 INCH (FROM 2017) Black

FREE FLEX WITH PEDESTAL IPAD AIR (FROM 2013) IPAD (FROM MARCH 2017) SuperSilver

FREE FLEX WITH PEDESTAL IPAD AIR (FROM 2013) IPAD (FROM MARCH 2017) Black

Follow Futurasmus:
Youtube,
Vimeo,
Instagram,
Twitter,
Facebook,
Linkedin,
Google +.

For further information do not hesitate to contact us on the phone +34 965.95.95.11 or the email commercial@futurasmus-knxgroup.com

* Offer available for orders until September 30th. Ask our sales department.
** Orders will be processes once the promotion is finished.

Tweet

Free, is milled from a single block of solid aluminium with special surface finishing. Visually, it seems to float in front of the wall. The open, asymmetrical form stands for minimalism, simplicity and elegance. The premium iPad holder for design lovers.

Easy remove and locking
Place the iPad in free and remove it at any time – even with just one hand. You stay flexible and mobile. free’s unique form makes connecting the iPad to the lightning adapter practically automatic. The soft felt covering protects the surface. Should your iPad require heightened protection, it can be secured with a lock and key system to protect against theft.

Charging the iPad
Your iPad is charged quickly and reliably in viveroo free. Thanks to a special power supply, the recharging feature treats the iPad’s battery with care – even though continuous charging. Your iPad is always ready for action.

Network connection
Free can be equipped with an ethernet adapter connecting the iPad to the network. For fast and reliable data transfer. Our docking station is perfect for secure and effective use as a control center and at work.

Free stands for quality you can feel, sustainable materials and excellent workmanship – made in Germany. The sturdy aluminum frame is cut right where viveroo is at home – in East Westphalia, Germany.

Free is available in the next sizes and formats:

FRAME iPad Pro 12.9 SuperSilver
FRAME iPad Pro 9.7“ & iPad Air 2 Silver
FRAME iPad Pro 9.7“ & iPad Air 2 Black anodized aluminium
FRAME iPad mini 4 (from 2015) Silver
FRAME iPad mini 4 (from 2015) Black anodized aluminium

Follow Futurasmus:
Youtube,
Vimeo,
Instagram,
Twitter,
Facebook,
Linkedin,
Google +.

For further information do not hesitate to contact us on the phone +34 965.95.95.11 or the email commercial@futurasmus-knxgroup.com

Tweet

Intesis presents new gateways for VRF systems.

This are the new gateways:

- KNX - HITACHI AC Commercial Lines (PAC, VRF).
- KNX - HISENSE AC Commercial Lines (PAC, VRF).

This are some of the gateways characteristics:

- Reduced dimensions and quick installation.
- Multiple objects for control and status (bit, byte, characters…) with KNX standard datapoint types.
- Status objects for every control available.
- Timeout for Open Window and Occupancy. Sleep function also available.
- Control of the AC unit based on the ambient temperature read by the own AC unit, or in the ambient temperature read by any KNX thermostat.
- AC unit can be controlled simultaneously by the wired remote control of the AC unit and by KNX.
- Total Control and Monitoring of the AC unit from KNX, including monitoring of AC unit’s state of internal variables, running hours counter (for filter maintenance control), and error indication and error code.
- Up to 5 scenes can be saved and executed from KNX, fixing the desired combination of Operation Mode, Set Temperature, Fan Speed, Vane Position and Remote Controller Lock at any moment by using a simple switching.
- Four binary inputs for potential-free contacts provide the possibility to integrate many types of external devices. Also configurable from ETS, they can be used for switching, dimming, shutter/blind control, and more.

Watch Intesis news at the light+building HERE.

See the product pages in the Futurasmus web:
KNX - HITACHI AC Commercial Lines (PAC, VRF) with 4 binary inputs
KNX - HISENSE AC Commercial Lines (PAC, VRF) with 4 binary inputs

Follow Futurasmus:
Youtube,
Vimeo,
Instagram,
Twitter,
Facebook,
Linkedin,
Google +.

For further information do not hesitate to contact us on the phone +34 965.95.95.11 or the email commercial@futurasmus-knxgroup.com

Tweet

Manufacturer IPAS has redesigned the internal hardware of their push-button range, thus replacing their old BCU with an updated version that allows a much more advanced functionality.

Of course, they have kept their modern look, their robustness and the possibility of customization.

We would like to highlight the following updates:

•    Complete shutter control with just one key: up, down, stop and slat control.
•    Complete dimmer control with just one key: on, off, brightness up and down
•    Send 1-byte-values (0…255=0..100%).
•    Send two 1-byte-values with just one key, alternate between them (0…255=0..100%).
•    Saving and executing scenes
•    Increasing or decreasing a 1-byte-value on a step basis (10%,20%,25%,33%,50%)

Currently, the new application program is not available for push-buttons without temperature control, even though it will be ready soon.

The old versions will be discontinued and the new ones keep the same reference number, with ‘-0B’ at the end.

Please, visit the IPAS product pages on our web site and find more information about these and other IPAS products.

Tweet