THE ALL-ROUND PARTNER FOR HOME AND BUILDING AUTOMATION WITH KNX

KNX news

Weinzierl presents the new actuator universal binary interface with two expansion modules

KNX IP Multi IO 580
The KNX IP Multi IO 580 is a universal binary interface for building control. It provides 48 I/O lines. Each line can be used as binary input as well as binary output. The peripherals can be fed by an external voltage of 24 V?. Channels which are configured as inputs can be used to control lights or blinds via the KNX network. They also can be used to count impulses, e.g. as interface for energy meters. Channels which are configured as outputs can directly drive signal LEDs, external coupling relays (e.g.Multi IO extension 590) or jalousie relays (Multi IO Extension 592).

The device works using the medium KNX IP. It can be configured using the ETS (Version 4.2 or higher) with native parameters and standard group objects. Also the KNX addressing scheme, based on individual device address and group objects, is unchanged. An easy to read OLED display on the front panel enables a manual operation to test the installation.

Multi IO Extension 590
The Multi IO Extension 590 serves as a power-saving alternative to commercial standard coupling relays. The coupling relay is controlled as a mono-stable relay, but uses a bi-stable relay internally, thus reducing the holding current by up to 95%.
The Multi IO Extension 590 has an integrated fuse to protect high-quality equipment.

Multi IO Extension 592
The Multi IO Extension 592 for shutter has been specially developed for the control of blinds and shutters. The double relay is connected to only one output of a KNX Multi IO 570 or 580. The direction control of the relay outputs is performed automatically by the KNX Multi IO by a defined voltage interruption of the holding current.

The outputs are electro-mechanically locked against each other to prevent a motor defect.

The Multi IO Extension 592 has an integrated fuse to protect high-quality equipment.


Read the technical data on the product pages:

KNX IP Multi IO 580 actuator universal binary interface for building control with 48 configurable In- and Outputs
Multi IO Extension 590 Module Relay
Multi IO Extension 592 blind shutter actuator module 1 channel

Watch Weinzierl news in the light+building HERE.

Follow Futurasmus:
Youtube,
Vimeo,
Instagram,
Twitter,
Facebook,
Linkedin,
Google +.

For further information do not hesitate to contact us on the phone +34 965.95.95.11 or the email commercial@futurasmus-knxgroup.com

Tweet

We introduce you the new Kamstrup KNX ultrasonic heat meter Multical 403 with Smart Meetering by Lingg & Janke.

The format of this hot water meter is new: The temperature range of the MULTICAL® 403 is from 15 to 130°C, so it's not just for hot, but also for cold.

Remote re-configuration and long-time accuracy
Imagine that utilities’ heat meters can be configured with new settings adjusted to the current needs – without logistical challenges and direct access to the meters and without legal registers, meter readings or network control being affected.

Imagine, that the meter’s log can be read in order for abnormal consumption patterns to be investigated – without having to disturb the customer unnecessarily.

With the new built-in 2-way communication in MULTICAL® 403 and a READY remote reading system, it is now possible to perform remote configuration of the meters and reading of the log without direct access to the installation.

Discover the possibilities within flexible and easy remote configuration of heat meters – for less hassle for both the utility and the consumer.

Flexibility and longtime accuracy
Now, you only need to keep one meter in stock. With MULTICAL® 403 everything from inlet/outlet position to energy unit, cut-off dates and much more can be configured individually via the meter’s front panel directly at the installation site.

This allows you to keep a low stock and save resources previously spent on planning.

Full flexibility
MULTICAL® 403 can be fitted with a selection of advanced communication modules. Kamstrup offers modules with Modbus, BACnet, M-bus, wireless M-bus and analogue outputs. By combining the meter’s very fast integration time and the modules’ optimised power consumption, you gain access to updated and very frequent meter data. By using M-Bus, the meter obtains a battery lifetime of up to 16 years with meter readings via the module every 10 seconds.

You can upgrade through separate software updates for the meter and module respectively as new possibilities and challenges occur without interfering with legal registers.


Read about the Lingg & Janke's Smart Meetering HERE.


Watch the product and download the datasheet, documents and application program here:
KAM-MC403 Kamstrup KNX ultrasonic heat an cooling meter Multical 403. 15 m³/h DN50 270mm flange 15-130°C


Follow Futurasmus:
Youtube,
Vimeo,
Instagram,
Twitter,
Facebook,
Linkedin,
Google +.

For further information do not hesitate to contact us on the phone +34 965.95.95.11 or the email commercial@futurasmus-knxgroup.com

Tweet

Iddero has just announced the new Iddero Mobile app which lets users control their VERSO+IP touch panels from smartphones and tablets.

The VERSO+IP is an evolution from the popular Iddero Verso 4,3” capacitive touch panel. The new model retains the elegant design, attractive visualisation, and advanced functionality of its predecessor, and adds an Ethernet port for IP connectivity. The VERSO+IP is available in white or black finish, and can be installed in portrait or landscape mode, either surface-mounted (on standard square or rounded wall mount boxes) or flush-mounted, using Iddero's E-F401 mounting adapter.

The Iddero Mobile app lets users control their VERSO+IP from smartphones and tablets. Both direct (LAN) connection and cloud-based operation are supported. No additional configuration is required: there is no need to worry about fixed IP addresses, dynamic DNS services, port forwarding, etc. The app automatically detects whether it can connect to the VERSO+IP directly over the home LAN; otherwise, it switches over to the cloud-based access service.

Setup of the Iddero Mobile app is straightforward. Users simply need to scan a QR code displayed by the VERSO+IP. The device is then linked to the user's idderocloud account, and will show up automatically on any smartphone or tablet where the user logs in; there is no need to repeat the linking procedure for every smartphone or tablet. Of course, as many devices as required can be linked to the same account.

The Iddero Mobile app closely mimics the user interface of the VERSO+IP, so no additional learning is required. Push notifications are supported and allow users to get notified immediately if an alarm is triggered, even if they are not actively using the app.

Needless to say, all communications are fully encrypted according to the latest security standards and recommendations.

The Iddero Mobile app is available now for Android devices through Google Play. An iOS version is under development and will be available soon.

To know more about the Iddero VERSO IP Room controller enter here.

Watch the product and download the datasheet and the application program here:
Iddero VERSO IP Room controller with 4.3 "capacitive touch screen and IP connectivity


Follow Futurasmus:
Youtube,
Vimeo,
Instagram,
Twitter,
Facebook,
Linkedin,
Google +.

For further information do not hesitate to contact us on the phone +34 965.95.95.11 or the email commercial@futurasmus-knxgroup.com

Tweet

Here you have new fimware updates by ISE.

New firmware version: ISE SMART CONNECT KNX SONOS

From now on the ISE SMART CONNECT KNX SONOS will be delivered in version 3.0

Now you can control up to ten (previously five) Sonos master devices and up to 5 slaves per master via KNX. Optionally, each room can be operated separately or via the party mode at the same time in the whole house.

All new features at a glance:

- Dynamic group formation for up to 10 groups (previously 5) with one master each and up to five slaves
- Random playback of titles in playlists
- Random start point in a playlist
- Repeat of playlists
- Device website in a new, user-friendly design

You can update the device via the integrated function on the device website.
Details and technical specifications can be found here.


New firmware version: ISE SMART CONNECT KNX LOEWE

From now on the ISE SMART CONNECT KNX LOEWE will be delivered in version 2.1
With the new firmware update for the ISE SMART CONNECT KNX LOEWE it is possible to send key codes of your remote control via KNX to your Loewe device.
So you can, for example, replace the TV remote control with a KNX based visualization or create your own scenes via KNX by combining different key codes, like e.g. a sleep function.
You can update the device via the integrated function on the device website.
Details and technical specifications can be found here.


Follow Futurasmus:
Youtube,
Vimeo,
Instagram,
Twitter,
Facebook,
Linkedin,
Google +.

For further information do not hesitate to contact us on the phone +34 965.95.95.11 or the email commercial@futurasmus-knxgroup.com

Tweet

Take advantage of the special offer in DaliControl gateways by MDT, with a 12% additional discount until October 15th.

The DaliControl Gateway by MDT is the interface between DALI lights and the KNX installation and offers many new possibilities, such as the light control in the HSV color space.

This new MDT gateways are some of the few DALI gateways that have temperature control. There are available in two versions:

- DaliControl Gateway with HSV Control, 128 ECG, 32 channels
- DaliControl Gateway with HSV Control, 64 ECG, 16 cchannels

OFFER:

DaliControl Gateway with HSV Control, 64 ECG, 16 channels
DaliControl Gateway with HSV Control, 128 ECG, 32 channels

These are some of the characteristics of the gateways:

- Tunable White, color temperature control.
- Control of up to 16-32 channels / light groups (switching, dimming, and brightness value).
- Operation modes (normal, continuous, night, stairwell and panic).
- Manual operation for all the 16-32 groups.
- 16-32 scenes with individual dimming times.
- Innovative HSV color control RGB, RGBW and XY color according to Dali DT8 standard.
- Integrated color control module for at time dependent controlling of the luminous color in up to 300 steps.
- Fault detection of lamp faults and faulty ECG.
- Energy saving function for switching off the ECGs (via additional KNX switch actuator).
- Supports different DALI ECG.
- Quick Exchange of ECG.
- Free DCA app for commissioning the DALI bus system and configuration of the scenes and time control.
- Production in Germany certified according to ISO 9001.
- 3 years warranty.

Watch MDT news and products at the ligh+building HERE.

See the product pages in the Futurasmus web:
DALICONTROL GATEWAY 16 CHANNELS
DALICONTROL GATEWAY 32 CHANNELS

Follow Futurasmus:
Youtube,
Vimeo,
Instagram,
Twitter,
Facebook,
Linkedin,
Google +.

For further information do not hesitate to contact us on the phone +34 965.95.95.11 or the email commercial@futurasmus-knxgroup.com

Tweet