KNX news
24 DE NOVIEMBRE DE 2010
New Iddero HC2-KNX 7" touch display
Today, Iddero launches into the market the big sister of their first HC1-KNX touch display.
It has been named HC2-KNX and has a (15:9) panoramic display of 7". It presents as its main novelty the direct compatibility with IP video-door communications, without the need of any additional software or hardware. An extension module that allows to integrate conventional video-door communications based on the 4+N system and on the ADS digital system from Fermax will be soon available. Both the stereo speakers and the microphone come integrated in the display.
A free firmware update is expected for the beginning of next year, this will allow the visualization of IP cameras in the display.
It is also worth to mention that this display is mounted on the same 5,7" wall box as the HC1-KNX, this enables the possibility of mounting the wall box during the installation and then decide which version of the display will finally be fitted.
As the HC1-KNX, this touch display has an integrated KNX BCU, Thermostat function (requires the use of an external sensor to measure the temperature), integrated web server (compatible with mobile phone browsers), logic functions, timers, scenes, technical alarm management, time programming, presence simulation, etc.
And of course, following the same line of the previous products presented by Iddero, the price of the display is more than attractive: 1150.00€ with methacrylate frame (Web Code 10043), 1175.00€ with aluminium frame (Web Code 10044), and 1195.00€ with white crystal frame (Web Code 10045). Frames are removable and exchangeable.
Finally, to partner the launching of this new display, Iddero has significantly reduced the price of both the HC1-KNX display and the GSM expansion module.
All these prices are valid starting from today.
For further information, you can download the data sheet and instructions manual from the HC2-KNX and you can also contact us for any doubt:
HC2-KNX Datasheet
It has been named HC2-KNX and has a (15:9) panoramic display of 7". It presents as its main novelty the direct compatibility with IP video-door communications, without the need of any additional software or hardware. An extension module that allows to integrate conventional video-door communications based on the 4+N system and on the ADS digital system from Fermax will be soon available. Both the stereo speakers and the microphone come integrated in the display.
A free firmware update is expected for the beginning of next year, this will allow the visualization of IP cameras in the display.
It is also worth to mention that this display is mounted on the same 5,7" wall box as the HC1-KNX, this enables the possibility of mounting the wall box during the installation and then decide which version of the display will finally be fitted.
As the HC1-KNX, this touch display has an integrated KNX BCU, Thermostat function (requires the use of an external sensor to measure the temperature), integrated web server (compatible with mobile phone browsers), logic functions, timers, scenes, technical alarm management, time programming, presence simulation, etc.
And of course, following the same line of the previous products presented by Iddero, the price of the display is more than attractive: 1150.00€ with methacrylate frame (Web Code 10043), 1175.00€ with aluminium frame (Web Code 10044), and 1195.00€ with white crystal frame (Web Code 10045). Frames are removable and exchangeable.
Finally, to partner the launching of this new display, Iddero has significantly reduced the price of both the HC1-KNX display and the GSM expansion module.
All these prices are valid starting from today.
For further information, you can download the data sheet and instructions manual from the HC2-KNX and you can also contact us for any doubt:
HC2-KNX Datasheet
29 DE OCTUBRE DE 2010
SMART METERING: the great Unknown
Everybody talks about it, but very few really know how to get started with an Energy Efficient installation.
First step: choosing the right counter.
Due to the often complex information available and different terminology used by the manufacturers for the same concept, this step can be a tough one. And some KNX professionals let go of some good opportunities because of the lack of proper information.
This is why we have organized all relevant data and homogenized the most common terms regarding KNX meters of different brands in one comparative table for your convenience.
We highly recommend you to download and have a look at it.
We highly recommend you to download it and have a look at it.
We highly recommend you to download it and have a look at it.
First step: choosing the right counter.
Due to the often complex information available and different terminology used by the manufacturers for the same concept, this step can be a tough one. And some KNX professionals let go of some good opportunities because of the lack of proper information.
This is why we have organized all relevant data and homogenized the most common terms regarding KNX meters of different brands in one comparative table for your convenience.
We highly recommend you to download and have a look at it.
We highly recommend you to download it and have a look at it.
We highly recommend you to download it and have a look at it.
22 DE OCTUBRE DE 2010
Not only a pretty face
We did talk about denroONE in the past, but we will be talking about this display very often in the future.
What’s new about it?
What’s new about it?
- User Manual in English – download it and get to know its great potential!
- For those of you who are already using it, please note the new Software und Firmware Update
- Show it to your clients by downloading this .pdf Design Picture
User Manual v.11
denroONE Plugin v0.22
Design picture denroONE
15 DE OCTUBRE DE 2010
NEW MDT PUSH BUTTONS
Basic and resourceful, discreet and up to date, high quality and low price, all at the same time. We speak about the new MDT Push Button series.
Basic:
Resourceful:
Discreet: white, flat, enduring…
Up to date: standard dimensions 55 x 55 mm to match a great selection of design frames from many manufacturers. Use the right frame to achieve a colorful, elegant, stylish solution.
High Quality:
Low Price:
Have a look at these list prices and ask for conditions for professionals:
Standard series
2-fold -> 75,00 €
4-fold -> 85,00 €
6-fold -> 95,00 €
8-fold -> 105,00 €
Plus series (status and orientation LEDs and logical functions)
2-fold -> 102,00 €
4-fold -> 112,00 €
6-fold -> 122,00 €
8-fold -> 132,00 €
And they are already available. Just contact us for purchase orders or cost estimates.
Basic:
- Integrated BCU
- Easy to configure via ETS
- All basic KNX push button functions available: switching, dimming, blind, 1 and 2 button operation, long/short push action,…
- Standard dimensions for installation in common European wall mounting boxes
- Available with 2, 4, 6 or 8 buttons, with or without status/orientation LEDs
Resourceful:
- Extensive logical functions
- LEDs linked to push buttons or external objects
- Cyclic sending
- Sending on leading/trailing edge
- Bicolor LEDs: red and green (blinking optional)
Discreet: white, flat, enduring…
Up to date: standard dimensions 55 x 55 mm to match a great selection of design frames from many manufacturers. Use the right frame to achieve a colorful, elegant, stylish solution.
High Quality:
- As always with MDT, 3-year warranty and the guarantee of Futurasmus KNX Group
- KNX certified
Low Price:
Have a look at these list prices and ask for conditions for professionals:
Standard series
2-fold -> 75,00 €
4-fold -> 85,00 €
6-fold -> 95,00 €
8-fold -> 105,00 €
Plus series (status and orientation LEDs and logical functions)
2-fold -> 102,00 €
4-fold -> 112,00 €
6-fold -> 122,00 €
8-fold -> 132,00 €
And they are already available. Just contact us for purchase orders or cost estimates.
08 DE OCTUBRE DE 2010
Complete LED control via KNX
LEDs represent the modern lighting trend worldwide (both for interior and facades) and that is a fact.
LEDs have existed for a long time, but have recently been enormously optimized for the lighting of home and building. Once the problems caused by heat generation were solved, there are only advantages:
Since they have become a more and more important issue in home and building automation projects, there are already various ways to integrate LEDs in a KNX System.
We are glad to introduce BILTON, the one manufacturer who is 100% specialized in this technology and KNX. This Austrian company only develops LED lighting and its control systems.
After presenting their two LED actuators at the light+building fair in Frankfurt, now they are already available. Each one is optimized for one the two different LED technologies:
Do not hesitate to contact us or visit our web site for more detailed information. And also keep in mind that BILTON does not only manufacture the KNX controller but also a wide range of LED strips and spotlights (also available in Futurasmus KNX Group)
LEDs have existed for a long time, but have recently been enormously optimized for the lighting of home and building. Once the problems caused by heat generation were solved, there are only advantages:
- Very long-lasting
- Extremely low power consumption
- Small size
- Exceptional brightness
- Total color scheme with endless ambient possibilities
- Less maintenance
Since they have become a more and more important issue in home and building automation projects, there are already various ways to integrate LEDs in a KNX System.
We are glad to introduce BILTON, the one manufacturer who is 100% specialized in this technology and KNX. This Austrian company only develops LED lighting and its control systems.
After presenting their two LED actuators at the light+building fair in Frankfurt, now they are already available. Each one is optimized for one the two different LED technologies:
- KNX DIM-SEQUENCE-ACTOR 12-24 V DC for CONSTANT VOLTAGE CONTROL (interior use - ambient light)
- - 3-channel
- - 2.2 A per channel
- - Very complete KNX application program
- • KNX DIM-SEQUENCE-ACTOR CURRENT for CONSTANT CURRENT CONTROL (façade lighting)
- - Current adjustable: 350 / 500 / 700 mA
- - 24 V DC, nominal voltage
- - Output voltage 22 V
- - From 1 to 6 LED per channel
- - Very complete KNX application program
Do not hesitate to contact us or visit our web site for more detailed information. And also keep in mind that BILTON does not only manufacture the KNX controller but also a wide range of LED strips and spotlights (also available in Futurasmus KNX Group)
