The sensors of the DIGITEMP series measure temperature values for the bus is achieved with the standard KNX/EIB connectors inside the heating, ventilation and air-conditioning applications. A typical examples is housing. In addition to a constant action controller the digitemp devices air intake (fresh air) and exhaust ducts, heating supply and return water provide 2 higher and 2 lower bound thresholds, which can be used temperatures and similar, as well as temperatures in rooms and buildings, individually or as two 2-step controllers.

These thresholds can trigger both in- and outside, like living quarters or storage depots. Our solutions switching actions (telegrams) on the bus. The group A threshold values comprise a damp environment sensor, contact sensor, room temperature and the setpoint value (in controller mode) can be set or modified directly via sensor, a channel or duct sensor and a pipe mounting sensor. Covering the (group) telegrams on the bus.

Optionally a live check (sensor status) report wide range of -55 … +125° C, they readily capture temperature values for is transmitted cyclically during correct operation of the sensor.

Type / Application: pipe mounting sensor ANF99 / measures temperatures on pipes

Properties:
·    temperature range -55 … +125°C
·    4 independent thresholds
·    integrated temperature contoller
·    complete FacilityWeb functionality in connection with NK-FW-xx.
·    integrated data logging for 1-year
·    thresholds adjustable by browser
·    RTFF10-FW including humidity measurement (without integrated temperature controller)
·    HTTP-protocol, dedicated homepage



immersion sleeve and mounting accessories on request