Manufacturer:
|
Siemens |
Reference 1:
|
5WG1 605-1AB01 |
Reference 2:
|
|
Series:
|
|
Colour:
|
- |
P.G.:
|
A22 |
Weight:
|
0,430 Kg. |
|
Web Code: 4166
Actuator for thermal positioners N 605/01
List Price:
Log in to view prices
* Ask our commercial agents about your discount
DOWNLOADS
ETS Application Program
Manufacturer ETS Database
DESCRIPTION
N 605 thermal drive actuator with 6 inputs and 6 outputs for control of electrothermal actuators for small valves for heaters and cooling ceilings, with 6 inputs for connection of potential-free contacts, with a length of unshielded connecting cable per input of max. 50 m, with generation of the sensing voltage, with configurable contact type (NO contact/NC contact), with configurable transmission of input status objects on request, in case of change, cyclically and/or in case of bus or system voltage recovery, with 6 outputs, each with a silent semiconductor switch, each rated for 230 V AC, a short-term load current of max. 1.5 A and a resistive steady-state load of max. 12 W (i.e. max. 4 parallel connected thermal drives permissible per output, each with 3 W steady-state load), with electronic protection of outputs against overload and short circuit, with signaling of a short-circuited or overloaded output and de-energizing of this output, with configurable valve open and close time, with configurable valve state (open or closed) in case of de-energized output, with adjustment to a non-linear valve characteristic curve, with configurable control per output either by control commands in percentage or by On/Off switching commands, with conversion of percentage control commands into pulse width modulated switching commands, with per output configurable position in case of an open window, with transmission of an output status object on request or if the switching state changes, with configurable behavior per output in case of bus power failure, with optional calcification protection, with electronics powered by an integrated power supply unit for 230 V AC, with one yellow LED for operation and group indication, with 3 red LEDs for switching status indication of a group of 3 outputs, with 3 pushbuttons for manual switching of the outputs of a group, with device operation independent of bus voltage, with integrated bus coupling unit, bus connection via bus terminal, for mounting on DIN rail EN 60715-TH35-7.5. Width 6 MW (1 Modular Width = 18 mm)
|