Manufacturer: Jung
Reference 1: 2131.16 UP
Reference 2:
Series:
Colour: -
P.G.: 06
Weight: 0,110 Kg.
Web Code: 2815

1-gang switch actuator 16A FM

List Price:   Log in to view prices
* Ask our commercial agents about your discount
  DESCRIPTION
KNX switch actuator, flush mounted
1-gang 2131.16 UP
2-gang 2132.6 UP

ETS-product family: Output
Product type: 1(2)-gang binary output

The switching actuator receives telegrams from sensors via the KNX and switches an electrical load with its relay-output.
The device is equipped with two extension inputs which - depending on parameterization - can act directly on the switching output (local control / only input 1, input 2 without function) or alternatively as binary inputs on the KNX.

The connected potential-free switch or push-button contacts are sensed against a common reference potential at the switching actuator. As a binary input, the device can transmit telegrams for switching or dimming, for shutter/blind control or for value transmitter applications (dimming value transmitter, light-scene extension).

Connecting 230 V signals or other external voltages to the extension inputs is not permitted.

The switching actuator is supplied from the KNX and needs no additional external power supply.

Technical data
KNX supply
Cable type: YY 6 x 6.0 mm; red: bus (+) / black: bus (-)
Voltage: 21 - 32 V DC SELV
Power consumption: typically 150 mW
Connection: approx. 33 cm ready-made; connecting terminal (0.6 - 0.8 mm)

Input
Number: 2 (depending on parameterization either as extension inputs for push-button local control
of the actuator or as independent binary inputs acting on the bus)
Cable type: YY 6 x 0.6 mm
green: extension input 1
white: reference potential (com)
yellow: extension input 2
brown: reference potential (com)
Cable length: approx. 33 cm ready-made, extendible to 5 m max.
Scanning voltage: approx. - 19 V DC referred to "com"; continuous signal
Loop resistance: max. 2 kOhm for safe "1" signal detection (rising edge)

Output, for 2131.16 UP
Number: 1
Cable type: 2 x H05 V-K 2.5 mm2 with ferrules
Cable length: approx. 20 cm ready-made
Switch type: make-contact, potential-free (µ-contact) bistable
Switching voltage: 230 V AC; 50/60 Hz
Max. switching current: 16 A
Max inrush current: 400 A, 20 ms
Switching capacity: Incandescent lamps 2.500 W (at 100.000 switching operations)
HV halogen lamps 2.200 W (at 100.000 switching operations)
LV halogen lamps
inductive transformers 1.000 VA
electronic transformers 1.000 W
capacitive loads 230 V AC, 10 A switching current, max. 105 µF
Output, for 2132.6 UP
Number: 2 (with common phase connection "L")
Cable type: 3 x H05 V-K 2.5 mm2 with ferrules
Cable length: approx. 20 cm ready-made
Switch type: make-contact, potential-free (µ-contact) bistable
Switching voltage: 230 V AC; 50/60 Hz
Max. switching current: 6 A for each output
Max inrush current: 120 A, 20 ms
Switching capacity: Incandescent lamps 1.200 W (at 25.000 switching operations)
HV halogen lamps 1.200 W (at 25.000 switching operations)
LV halogen lamps
inductive transformers 500 VA
electronic transformers 500 W
capacitive loads 230 V AC, 6 A switching current, max. 14 µF
Protection: IP 20
Safety class: III
Mark of approval: KNX
Ambient temperature: -5°C ... +45°C
Storage/transport temperature: -25°C ... +70°C (storage above +45°C results in shorter lifetime)
Mounting position: any
Minimum spacings: none
Fastening: e.g. placing into deep flush-mounting box (Ø 60 mm x 60 mm)


KNX SPECIAL CATALOGUES
Different looks for KNX push buttons
Push buttons
Smart metering
MDT Catalog 2017
Iddero Verso Interactive Presentation

LEARN
Free webinars
uBrick Tutorials
VideoTutorials CBSE


PARTICIPATE
µBrick Trivia
KNX Tips & tricks
TEST
Free test of CBSE visualization

LATEST KNX NEWS
All news

LATEST KNX OFFERS
All offers
DOWNLOADS
KNX - All brands

FUTURASMUS KNX GROUP
Contact
Location
Futurasmus in the world
FOLLOW US
YouTube Channel
Facebook
LinkedIN
Google+
Twitter

KNX++ TRAINING CENTER
Futurasmus Zentrum

CERTIFIED KNX TEST LAB
Futurasmus KNX Lab
SPECIALIZED KNX WHOLESALER CERTIFIED KNX TRAINING CENTRE
Futurasmus KNX Group is a highly specialized and internationally active KNX Wholesaler, being our forte the excellent technical support we provide. You can visit our online catalogue in this website and, if you are a professional, ask for a non binding offer for your KNX projects. Should you be interested in buying KNX components, you are welcome to read our General Sales Conditions and contact our technicians and commercial agents per telephone, e-mail or online help. Since 2003 we have been a Certified Training Centre KNX++, which means that we are entitled to impart the KNX Basic Course as well as the KNX Advanced Course and KNX Tutor Course. We are manufacturer-independent and also offer other specialized and monographic KNX seminars. After teaching more than 1.500 KNX partners, our KNX Trainers have quite a large and positive expertise. Please, contact us for customized KNX training worldwide (groups of at least 8 people) at training@futurasmus-knxgroup.org
USE OF COOKIES
We use our own and third-party cookies, analyzing your browsing habits in out website, with the finality of ensuring the quality, security and improvement of the offered services through the same. In the case that the user does not explicitly state whether to accept the installation of cookies, but continues using our website, it will mean that he has consented expressly, informing him about the possibility to block or remove the installed cookies on his computer by configuring the appropriate settings of the browser. You can get more information on this subject reading our "Cookies Policy".