KNX news
15 DE ENERO DE 2016
MDT- Decentralized fancoil control
Fancoil control - Switching Actuator 3-fold with fancoil operation
This extremely small device has outputs only to control the fan speeds, but its application program is prepared to control and entire fancoil. You can therefore combine it with any other actuator’s free channel for the valve and achieve a totally decentralized fancoil control.
PRODUCT INFO
This extremely small device has outputs only to control the fan speeds, but its application program is prepared to control and entire fancoil. You can therefore combine it with any other actuator’s free channel for the valve and achieve a totally decentralized fancoil control.
PRODUCT INFO
14 DE ENERO DE 2016
Ipas - µBrick series: Optimized to switch LEDs!
Optimized to switch LEDs! – Finally, with a very small, extremely powerful, economic and decentralized universal binary & blind actuator.
Ipas - µBrick series: : All actuators from the µBrick series stand out for their extremely compact design, very low price and extremely powerful application program and now also suitable for LED lamps.
Practical test run by Futurasmus: switch 45 LED circuits* and control 3 blinds by using 3 µBrick o18 actuators (12 DIN-rail-units). Without the LED function, the outputs would endure around 8.000 switchings; in this case, multiply by 40 the actuator’s life cycle (and reach up to over 300.000 switchings).
* 16 LED bulbs each with 8 W equals 128 W per output. Multiplied by 45 outputs gives you a total number of 720 LEDs adding up to a power of 5760W.(Mixed functionality is permitted: channels can be configured as LED, resistive, or shutter/blinds.)
PRODUCT INFO
TUTORIALS
Ipas - µBrick series: : All actuators from the µBrick series stand out for their extremely compact design, very low price and extremely powerful application program and now also suitable for LED lamps.
Practical test run by Futurasmus: switch 45 LED circuits* and control 3 blinds by using 3 µBrick o18 actuators (12 DIN-rail-units). Without the LED function, the outputs would endure around 8.000 switchings; in this case, multiply by 40 the actuator’s life cycle (and reach up to over 300.000 switchings).
* 16 LED bulbs each with 8 W equals 128 W per output. Multiplied by 45 outputs gives you a total number of 720 LEDs adding up to a power of 5760W.(Mixed functionality is permitted: channels can be configured as LED, resistive, or shutter/blinds.)
PRODUCT INFO
TUTORIALS
14 DE ENERO DE 2016
Lingg & Janke - eco+ product range- Robust, simple and inexpensive.
Robust, simple and inexpensive.
Lingg & Janke - eco+ product range: including switching, blind/shutter actuators and binary inputs, with an outstanding price-performance ratio.
Based on the same hardware used in Lingg & Janke’s well-known and very robust standard range, only without manual control switches and a much more economic.
DOWNLOAD FLYER/PRICE LIST
Lingg & Janke - eco+ product range: including switching, blind/shutter actuators and binary inputs, with an outstanding price-performance ratio.
Based on the same hardware used in Lingg & Janke’s well-known and very robust standard range, only without manual control switches and a much more economic.
DOWNLOAD FLYER/PRICE LIST
14 DE ENERO DE 2016
MDT - KNX RF+ series: Wireless, especially for renovations
Wireless, especially for renovations - with KNX RF+ protocol
MDT - KNX RF+ series: : KNX RF + Glass Push Button Plus series with integrated actuator (2 ON/OFF or 1 Blind)
The new KNX RF+ is fully integrated within the KNX protocol and all supporting devices can be commissioned with the ETS. Attention: it should not be confused with the proprietary RF systems and KNX gateways mostly found in the market.
The KNX RF+ can be integrated perfectly in KNX TP installations. It is thus not only perfect for renovations, but also for any KNX installation (in those places where the KNX wiring was not forseen).
PRODUCT INFO
MDT - KNX RF+ series: : KNX RF + Glass Push Button Plus series with integrated actuator (2 ON/OFF or 1 Blind)
The new KNX RF+ is fully integrated within the KNX protocol and all supporting devices can be commissioned with the ETS. Attention: it should not be confused with the proprietary RF systems and KNX gateways mostly found in the market.
The KNX RF+ can be integrated perfectly in KNX TP installations. It is thus not only perfect for renovations, but also for any KNX installation (in those places where the KNX wiring was not forseen).
PRODUCT INFO
14 DE ENERO DE 2016
Lingg & Janke - quick System - For KNX newcomers
For KNX newcomers - No ETS Software needed.
Lingg & Janke - quick System: The first KNX products for installers with no KNX knowledge! If you are still not sure which system to choose and don’t want to make a big investment (KNX Partner training, buy ETS Software, etc.), these are the products you should go for.
As can be seen in the picture, you can configure everything with the small coding screws. The good news is that these devices are 100% KNX, meaning that it can also be programmed with the ETS and integrated into any KNX system.
DOWNLOAD FLYER/PRICE LIST
PRODUCT INFO
Lingg & Janke - quick System: The first KNX products for installers with no KNX knowledge! If you are still not sure which system to choose and don’t want to make a big investment (KNX Partner training, buy ETS Software, etc.), these are the products you should go for.
As can be seen in the picture, you can configure everything with the small coding screws. The good news is that these devices are 100% KNX, meaning that it can also be programmed with the ETS and integrated into any KNX system.
DOWNLOAD FLYER/PRICE LIST
PRODUCT INFO
