KNX news
11 DE MARZO DE 2016
Sewi KNX; 8 KNX combined sensors (presence, temperature, humidity, CO2, brightness, pressure)
The various single and combined sensors offer the appropriate unit for every application.
The different models have got various additional functions: To calculate mixed values, values of other sensors are received via the bus and mixed with own measured values.
The summer compensation for cooling adjusts the room target temperature to the outdoor temperature via a characteristic curve.
Multifunctional modules change input data by calculations, survey of a condition or transition of the data point type.
The output of the logic gates can be set to 1 bit or 2 x 8 bits according to your needs. The automatic functions and controllers are configured by means of the ETS.
Models:
- Temperature Sensor
- Temperature/Humidity Sensor
- Air Quality Sensor
- Brightness Sensor Presence/Brightness Sensor
- Room Climate Sensor
- Presence/Room Climate Sensor
- Presence/Room Climate Sensor
10 DE MARZO DE 2016
Glass push button II smart stylish and lots of functionality!!
The Glass Push Button II Smart has a large, colored active display to indicate function and status. For each button are symbols and plain text adjustable. The 2 buttons on top are used to enter the function levels directly, the other 4 buttons can be reserved with 2 or 3 function levels (8/12-fold). The Glass Push Button II Smart can be also used as 6-fold push button without function levels.
The Glass Push Button II Smart offers additional functions to set temperature and operation mode. In combination with the MDT Heating Actuator an efficient room temperature regulation can be configured and visualized. Furthermore user defined 1Bit messages and 14Byte text telegrams can be indicated.
10 DE MARZO DE 2016
Updated heating actuator more functionality, integrated PI temperature controller,etc.
Each channel has its own LED indicator.
• Extensive function extension
• Each channel controls up to 4 electrothermic valve drives (230VAC)
• Controllable with 1Bit (Switching/PWM) / 1Byte actuating variable or direct control with temperature value via KNX bus
• Integrated PI temperature controller (Heating and Cooling)
• Given value is stored at voltage failure
• 1Bit +/-, 1Byte or 2Byte absolute object to set the given value
• Comfort-, night- and frost protection. Summer-/winter operation
• Emergency operation if cyclic actuating variable fails
• Short circuit detection of connected load
• Detection of 230VAC mains voltage failure
• Objects for heating request and cyclic movement of the valves
• Extensive scene functions
• Minimum flow temperature
• Diagnostics for each channel with 14Byte plain text object
10 DE MARZO DE 2016
The new AKS series offers more channels at less space, so lower costs per channel.
• Space saving by ideal form factor
• Extensive function extension
• Lockable manual operation and LED indicator for each channel
• NO and NC contact operation
• Status response at manually operation
• Time functions (switch-on/switch-off delay, staircase light functions)
• Extended logical and scene functions for each channel
• Extended status functions (inverted, cyclic, at block)
• Treshold switch (Byte/2Byte/2Byte float)
• Hour meter for switching
• Priority/forced operation with automatic release time
• Separate power supply terminals for each channel
• Power supply via KNX bus
• Integrated bus coupling unit
07 DE MARZO DE 2016
Iddero introduces new Iddero Verso 4,3” touch panel
The Iddero Verso provides an intuitive, user-friendly visualisation with up to 48 configurable functions that can be arranged freely over 6 control pages. An additional “favorites” page makes it possible for the end user to select up to 8 commonly used functions for quick and easy access. Furthermore, touch gestures can be used to trigger up to 4 predefined actions even while the unit is in power saving mode.
A wide range of widgets can be used in the visualisation, including RGBW color pickers, regulation bars, rotary controls, and much more. The beautifully crafted user interface shows attention to detail in every aspect. UI themes and configurable background images make it possible to further adapt the look and feel to any interior design or ambience.
Advanced functions include weekly time schedules, alarm monitoring, an internal scene controller, and two independent thermostats. Additionally, the built-in temperature sensor, four multifunction inputs, and integrated KNX bus coupler make this all-rounder a perfect choice for all KNX projects.
Hall 9.0, Stand F03. light+building 2016