Order by:   Filter results: 
Web Code Reference Description Category Price
9739 BE-02001.01 Universal Interface 2-fold INPUTS
To connect conventionel push-buttons or auxiliary contacs like door and window contacts. 4 integrated logical modules. Each input can be parametrised as 1,5mA output for low current LED. Each input could be parameterised individually and offers functions like debounce time, counting of pulses, telegramm rate limitation, operation of blinds and shutters, NO or NC contact operation and block communication objects.
Installation in wiring box or behind conventionel push-button. Design 41mm x 41mm x 12mm, integrated bus coupling unit. Busconnector red/black included.
9739
BE-02001.01 UNIVERSAL INTERFACE 2-FOLD INPUTS
9743 BE-04001.01 Universal Interface 4-fold INPUTS
To connect conventionel push-buttons or auxiliary contacs like door and window contacts. 4 integrated logical modules. Each input can be parametrised as 1,5mA output for low current LED. Each input could be parameterised individually and offers functions like debounce time, counting of pulses, telegramm rate limitation, operation of blinds and shutters, NO or NC contact operation and block communication objects.
Installation in wiring box or behind conventionel push-button. Design 41mm x 41mm x 12mm, integrated bus coupling unit. Busconnector red/black included.
9743
BE-04001.01 UNIVERSAL INTERFACE 4-FOLD INPUTS
9745 BE-08000.01 Binary Input 8-fold, contact inputs, 4U INPUTS
Binary Input to read out floating contacts. To connect conventionel push-buttons or auxiliary contacs like door and window contacts. 4 integrated logical modules. Each input could be parameterised individually and offers
functions like debounce time, counting of pulses, telegramm rate limitation, operation of blinds and shutters, NO or NC contact operation and block communication objects. Modular installation device for DIN 35mm rails.
Width 4 Space Units, integrated bus coupling unit. Busconnector red/black included.
9745
BE-08000.01 BINARY INPUT 8-FOLD, CONTACT INPUTS, 4U INPUTS
9746 BE-08024.01 Binary Input 8-fold, inputs 12-24VAC/DC INPUTS
Binary Input 8-fold, inputs 12-24VAC/DC. To connect conventionel push-buttons or auxiliary contacs like door and window contacts. 4 integrated logical modules. Each input could be parameterised individually and offers
functions like debounce time, counting of pulses, telegramm rate limitation, operation of blinds and shutters, NO or NC contact operation and block communication objects. Modular installation device for DIN 35mm rails.
Width 4 Space Units, integrated bus coupling unit. Busconnector red/black included.
9746
BE-08024.01 BINARY INPUT 8-FOLD, INPUTS 12-24VAC/DC INPUTS
9747 BE-08230.01 Binary Input 8-fold, inputs 230VAC, 4U INPUTS

Binary Input with input detection of 230VAC signals.

To connect conventionel push-buttons or auxiliary contacs like door and window contacts.

4 integrated logical modules.

 Each input could be parameterised individually and offers functions like debounce time, counting of pulses, telegramm rate limitation, operation of blinds and shutters, NO or NC contact operation and block communication objects.

Modular installation device for DIN 35mm rails.

Width 4 Space Units, integrated bus coupling unit.

Busconnector red/black included.

9747
BE-08230.01 BINARY INPUT 8-FOLD, INPUTS 230VAC, 4U INPUTS
9748 BE-16000.01 Binary Input 16-fold, contact inputs INPUTS
Binary Input to read out floating contacts. To connect conventionel push-buttons or auxiliary contacs like door and window contacts. 4 integrated logical modules. Each input could be parameterised individually and offers
functions like debounce time, counting of pulses, telegramm rate limitation, operation of blinds and shutters, NO or NC contact operation and block communication objects. Modular installation device for DIN 35mm rails.
Width 8 Space Units, integrated bus coupling unit. Busconnector red/black included.
9748
BE-16000.01 BINARY INPUT 16-FOLD, CONTACT INPUTS INPUTS
9749 BE-16024.01 Binary Input 16-fold, Inputs 12-24VAC/DC INPUTS
Binary Input with input detection of 12-24VAC/DC signals. To connect conventionel push-buttons or auxiliary contacs like door and window contacts. 4 integrated logical modules. Each input could be parameterised individually and offers functions like debounce time, counting of pulses, telegramm rate limitation, operation of blinds and shutters, NO or NC contact operation and block communication objects. Modular installation device for DIN 35mm rails. Width 8 Space Units, integrated bus coupling unit. Busconnector red/black included.
9749
BE-16024.01 BINARY INPUT 16-FOLD, INPUTS 12-24VAC/DC INPUTS
9750 BE-16230.01 Binary Input 16-fold, inputs 230VAC, 8u INPUTS

Binary Input with input detection of 230VAC signals.

To connect conventionel push-buttons or auxiliary contacs like door and window contacts.

4 integrated logical modules.

Each input could be parameterised individually and offers functions like debounce time, counting of pulses, telegramm rate limitation, operation of blinds and shutters, NO or NC contact operation and block communication objects.

Modular installation device for DIN 35mm rails.

Width 8 Space Units, integrated bus coupling unit.

Busconnector red/black included.

9750
BE-16230.01 BINARY INPUT 16-FOLD, INPUTS 230VAC, 8U INPUTS
10140 AKD-0201.01 Dimming Actuator 2-fold, 230VAC/250W ACTUATORS - OUTPUTS
Universal Dimming Actuator for switching and dimming incandescent lamps, 230V halogen lamps, LED lightling and dimmable energy saving lamps. Integrated short circuit and excess-temperature protection.

Softstart function to increase lamp life time.

Maximum load per channel 250W, minimum load 12 W.

Separate power supply terminal for two channels.

Modular installation device for DIN 35mm rails.

Width 4 Space Units, integrated bus coupling unit.

Busconnector red/black included.

3 years warranty.
10140
AKD-0201.01 DIMMING ACTUATOR 2-FOLD, 230VAC/250W ACTUATORS - OUTPUTS
10141 AKD-0401.01 Dimming Actuator 4-fold, 230VAC/250W ACTUATORS - OUTPUTS
Universal Dimming Actuator for switching and dimming incandescent lamps, 230V halogen lamps, LED lightling and dimmable energy saving lamps. Integrated short circuit and excess-temperature protection.

Softstart function to increase lamp life time.

Maximum load per channel 250W, minimum load 12 W.

Separate power supply terminal for two channels.

Modular installation device for DIN 35mm rails.

Width 8 Space Units, integrated bus coupling unit.

Busconnector red/black included.

3 years warranty.
10141
AKD-0401.01 DIMMING ACTUATOR 4-FOLD, 230VAC/250W ACTUATORS - OUTPUTS
10249 AKD-0103.01 Dimming Actuator 1-fold, 230VAC/600W ACTUATORS - OUTPUTS
Universal Dimming Actuator for switching and dimming incandescent lamps, 230V halogen lamps, LED lightling and dimmable energy saving lamps. Integrated short circuit and excess-temperature protection.

Softstart function to increase lamp life time.

Maximum load per channel 600W, minimum load 12 W.

Separate power supply terminal for two channels.

Modular installation device for DIN 35mm rails.

Width 4 Space Units, integrated bus coupling unit.

Busconnector red/black included.

3 years warranty.
10249
AKD-0103.01 DIMMING ACTUATOR 1-FOLD, 230VAC/600W ACTUATORS - OUTPUTS
10250 AKD-0203.01 Dimming Actuator 2-fold, 230VAC/600W ACTUATORS - OUTPUTS
Universal Dimming Actuator for switching and dimming incandescent lamps, 230V halogen lamps, LED lightling and dimmable energy saving lamps. Integrated short circuit and excess-temperature protection.

Softstart function to increase lamp life time.

Maximum load per channel 600W, minimum load 12 W.

Separate power supply terminal for two channels.

Modular installation device for DIN 35mm rails.

Width 8 Space Units, integrated bus coupling unit.

Busconnector red/black included.

3 years warranty.
10250
AKD-0203.01 DIMMING ACTUATOR 2-FOLD, 230VAC/600W ACTUATORS - OUTPUTS
10272 SCN-TS1UP.01 Room Temperature Sensor 1-fold SENSORS
White matt finish, flush mounted, Without controller function
10272
SCN-TS1UP.01 ROOM TEMPERATURE SENSOR 1-FOLD SENSORS
10462 SCN-LK001.01 Line coupler, 2TE MRDC SYSTEM DEVICES
Line coupler to connect two KNX lines to each other

• Electrical isolation between the lines
• Reduction of the busload by filter function
• Modular installation device for DIN 35mm rails
• Integrated bus coupling unit
• 3 years warranty
10462
SCN-LK001.01 LINE COUPLER, 2TE MRDC SYSTEM DEVICES
10691 SCN-RT6AP.01 TEMPERATURE CONTROLLER / Sensor 6-FOLD SENSORS
 Temperature Controller / Sensor 6-fold Surface mounted device for PT 1000 sensors up to 12m cable lengthTemperature range

• Operation as temp. controller (PI,Two-position, PWM) or sensor

• Temperarure measurement by seperate PT 1000 sensors

• Limit values min/max, Frost protection alarm, Memory for min/max

• Cyclical sending of contact state programmable

• Day-, night- and frost protection operation

• HVAC object and 1bit object to choose operation mode

• RHCC status and bit/byte objects to declare status • Desired value can be set by visualisation, e.g. MDT VisuControl

• Surface mounted wiring box

• Integrated bus coupling unit

• 3 years warranty

10691
SCN-RT6AP.01 TEMPERATURE CONTROLLER / SENSOR 6-FOLD SENSORS
11497 BE-GT04W.01 BE-GT, GLAS PUSH BUTTON 4-FOLD PLUS, white PUSH BUTTONS

Description

The MDT Glas Push Button releases KNX telegrams after touching the sensor areas on top, 1 or 2 button operation can be parameterized.

  • Production in Germany, certified according to ISO 9001
  • Fully compatible to all KNX/EIB devices
  • Sensor areas can be parameterized for 1 or 2 button operation
  • NO or NC contact operation, programmable length of button push
  • Forced setting function for each output
  • Operation with short/long button push and 2 objects
  • White/Red LED for each sensor area
  • Surrounding orientation light
  • Brightness of LED adjustable via object
  • Operation of blinds and shutters, 1 and 2 button operation
  • Title block to insert behind glas front, labeling fim included
  • Installation with support ring (included in delivery)
  • Integrated bus coupling unit
  • 3 years warranty
11497
BE-GT04W.01 BE-GT, GLAS PUSH BUTTON 4-FOLD PLUS, WHITE PUSH BUTTONS
11501 BE-GT08W.01 BE-GT, GLAS PUSH BUTTON 8-FOLD PLUS, WHITE PUSH BUTTONS

Description

With 8 sensor areas and LED for operation and status. Surrounding orientation light.

The MDT Glas Push Button releases KNX telegrams after touching the sensor areas on top, 1 or 2 button operation can be parameterized.

  • Production in Germany, certified according to ISO 9001
  • Fully compatible to all KNX/EIB devices
  • Sensor areas can be parameterized for 1 or 2 button operation
  • NO or NC contact operation, programmable length of button push
  • Forced setting function for each output
  • Operation with short/long button push and 2 objects
  • White/Red LED for each sensor area
  • Surrounding orientation light
  • Brightness of LED adjustable via object
  • Operation of blinds and shutters, 1 and 2 button operation
  • Title block to insert behind glas front, labeling fim included
  • Installation with support ring (included in delivery)
  • Integrated bus coupling unit
  • Dimensions 92mm x 163mm
  • 3 years warranty
11501
BE-GT08W.01 BE-GT, GLAS PUSH BUTTON 8-FOLD PLUS, WHITE PUSH BUTTONS
11516 BE-GTT4S.01 BE-GTT, Glass Push Button 4-fold Plus, Black, Temperature Sensor PUSH BUTTONS

Description

The MDT Glas Push Button releases KNX telegrams after touching the sensor areas on top, 1 or 2 button operation can be parameterized.

  • Production in Germany, certified according to ISO 9001
  • Sensor areas can be parameterized for 1 or 2 button operation
  • NO or NC contact operation, programmable length of button push
  • Forced setting function for each output
  • Operation with short/long button push and 2 objects
  • White/Red LED for each sensor area
  • 4 integrated logical modules, cleaning function
  • Additional switching channel (e.g. panic function)
  • Surrounding orientation light with day/night object
  • Brightness of LED adjustable in 5 steps via object
  • Operation of blinds and shutters, 1 and 2 button operation
  • Title block to insert behind glas front, labeling fim included
  • Installation with support ring (included in delivery)
  • Integrated bus coupling unit
  • 3 years warranty
11516
BE-GTT4S.01 BE-GTT, GLASS PUSH BUTTON 4-FOLD PLUS, BLACK, TEMPERATURE SENSOR PUSH BUTTONS
11519 BE-04024.01 Binary Inputs 4-fold ,2SU MDRC, Inputs 24VAC/DC INPUTS

 

Description

The MDT Binary Input is available in 3 versions, input detection of 24VAC/DC signals, input detection of 230VAC signals and reading out of floating contacts. The Binary Input reacts depending on its programmed parameters and sends a telegram on the KNX bus.

  • Production in Germany, certified according to ISO 9001
  • Fully compatible to all KNX/EIB devices
  • To connect conventional push-buttons or window/auxiliary contacts
  • 4 integrated logical modules
  • Telegram rate limitation, cyclic sending of contact state programmable
  • NO or NC contact operation, programmable length of button push
  • Operation of blinds and shutters, 1 and 2 button operation
  • Forced setting function for each output
  • Operation with short/long button push and 2 objects
  • Counting of pulses, suitable for 30ms S0 pulses
  • Integrated bus coupling unit
  • 3 years warranty
11519
BE-04024.01 BINARY INPUTS 4-FOLD ,2SU MDRC, INPUTS 24VAC/DC INPUTS
11520 BE-04230.01 Binary Inputs 4-fold ,2SU MDRC, Inputs 230VAC INPUTS
The MDT Binary Input is available in 3 versions, input detection of 24VAC/DC signals, input detection of 230VAC signals and reading out of floating contacts. The Binary Input reacts depending on its programmed parameters and sends a telegram on the KNX bus.

• 4 binary inputs of 230VAC
• Status LED for each input
• Function on / off, dimmer (with 1 or 2 keys), blind (with 1 or 2 keys), delivery of securities, forced control, short / long press, counter, scenes, etc.
• Additional functions such as delays, blocking, cyclical transmission, 4 logic functions AND / OR separate entrances, etc.
• Size: 2U DIN
11520
BE-04230.01 BINARY INPUTS 4-FOLD ,2SU MDRC, INPUTS 230VAC INPUTS
11521 BE-06001.01 Universal Interface 6-fold, flush mounted, Contact Inputs INPUTS

 

Description

The inputs of the MDT Universal Interface react depending on their programmed parameters and send a telegram on the KNX bus.
You can connect conventional push-buttons or auxiliary contacts (e.g. door and window contacts) to the device.

  • Production in Germany, certified according to ISO 9001
  • Fully compatible to all KNX/EIB devices
  • To connect conventional push-buttons or auxiliary contacts
  • 4 integrated logical modules, sending od scenes
  • Telegram rate limitation
  • NO or NC contact operation, programmable length of button push
  • Operation of blinds and shutters, 1 and 2 button operation
  • Forced setting function for each output
  • Operation with short/long button push and 2 objects
  • Counting of pulses
  • Cyclical sending of contact state programmable
  • Each output can be set as 1,5mA output for low current LED
  • Flush mounted (length of connection cables: 22cm)
  • Dimensions (W x H x D): 41mm x 41mm x 12mm
  • Integrated bus coupling unit
11521
BE-06001.01 UNIVERSAL INTERFACE 6-FOLD, FLUSH MOUNTED, CONTACT INPUTS INPUTS
11988 BE-GTT8S.01 BE-GTT, Flush mounted, Black, Surrounding orientation light, Integrated temperature sensor PUSH BUTTONS

Description

The MDT Glas Push Button releases KNX telegrams after touching the sensor areas on top, 1 or 2 button operation can be parameterized.

  • Production in Germany, certified according to ISO 9001
  • Sensor areas can be parameterized for 1 or 2 button operation
  • NO or NC contact operation, programmable length of button push
  • Forced setting function for each output
  • Operation with short/long button push and 2 objects
  • White/Red LED for each sensor area
  • 4 integrated logical modules, cleaning function
  • Additional switching channel (e.g. panic function)
  • Surrounding orientation light with day/night object
  • Brightness of LED adjustable in 5 steps via object
  • Operation of blinds and shutters, 1 and 2 button operation
  • Title block to insert behind glas front, labeling fim included
  • Installation with support ring (included in delivery)
  • Integrated bus coupling unit
  • 3 years warranty
11988
BE-GTT8S.01 BE-GTT, FLUSH MOUNTED, BLACK, SURROUNDING ORIENTATION LIGHT, INTEGRATED TEMPERATURE SENSOR PUSH BUTTONS
13786 AKD-0410V.02 Dimming Actuator 4-fold, 4TE MRDC, 1-10V with RGBW ACTUATORS - OUTPUTS
Control device for 1-10V electronic transformers (ET), With relays, current max. 16A, capacitive load max. 140uF
• Push Button and LED indicator for each channel
• To control 1-10V electronic transformers (ET)
• Offers control voltage up to 30 ET (each channel)
• Voltage reversal protection
• Embedded switching relays for 30 ET/30W, 20 ET/58W,
30 ET/2x36W, 30 ET/2x58W
• Programmable switch-on behaviour
• Programmable dimming speed
• Central switching functions
• 8 scenes per channel
• 1-bit automatic function
• Modular installation device for DIN 35mm rails
• Integrated bus coupling unit
• 3 years warranty
13786
AKD-0410V.02 DIMMING ACTUATOR 4-FOLD, 4TE MRDC, 1-10V WITH RGBW ACTUATORS - OUTPUTS
16747 AIO-0410V.01 Analog Actuator 4-fold, 2SU, MDRC, In-/Output shiftable. ACTUATORS - OUTPUTS

• Production in Germany, certified according to ISO 9001
• Each channel can be configured indepentently (In-/output)
• In/outputs are galvanically isolated from the bus
• In/outputs are galvanically connected together
• Voltage for output operation is generated inside the actuator
• No external power supply required
• Input operation 0-10V/2-10V or 0-20mA/4-20mA (switchable)
 - Conversation of measuring unit and DPT can be parameterized
 - Min/max function, wire breakage detection
 - Threshold and traffic light function
• Output functions 0-10V:
 - Control by 1Byte, 2Byte float or 1Bit objects
 - Day/night function to limit control value
 - Emergency mode if given value fails
• Flush mounted in socket
• Dimensions (W x H x D): 41mm x 41mm x 22mm
• Integrated bus coupling unit

16747
AIO-0410V.01 ANALOG ACTUATOR 4-FOLD, 2SU, MDRC, IN-/OUTPUT SHIFTABLE. ACTUATORS - OUTPUTS
17167 AKH-0400.02 Heating Actuator 4-fold, 2SU MDRC, 24-230VAC CLIMATE CONTROL
Heating Actuator to control electrothermic valve drives
LED indicator for each channel
• Extensive function extension
• Each channel controls up to 4 electrothermic valve drives (230VAC)
• Controllable with 1Bit (Switching/PWM) / 1Byte actuating variable or direct control with temperature value via KNX bus
• Integrated PI temperature controller (Heating and Cooling)
• Given value is stored at voltage failure
• 1Bit +/-, 1Byte or 2Byte absolute object to set the given value
• Comfort-, night- and frost protection. Summer-/winter operation
• Emergency operation if cyclic actuating variable fails
• Short circuit detection of connected load
• Detection of 230VAC mains voltage failure
• Objects for heating request and cyclic movement of the valves
• Extensive scene functions
• Minimum flow temperature
• Diagnostics for each channel with 14Byte plain text object
• Integrated bus coupling unit
• 3 years warranty
17167
AKH-0400.02 HEATING ACTUATOR 4-FOLD, 2SU MDRC, 24-230VAC CLIMATE CONTROL
17168 AKH-0800.02 Heating Actuator 8-fold, 4SU MDRC, 24-230VAC CLIMATE CONTROL
Heating Actuator to control electrothermic valve drives
LED indicator for each channel
• Extensive function extension
• Each channel controls up to 4 electrothermic valve drives (230VAC)
• Controllable with 1Bit (Switching/PWM) / 1Byte actuating variable
or direct control with temperature value via KNX bus
• Integrated PI temperature controller (Heating and Cooling)
• Given value is stored at voltage failure
• 1Bit +/-, 1Byte or 2Byte absolute object to set the given value
• Comfort-, night- and frost protection. Summer-/winter operation
• Emergency operation if cyclic actuating variable fails
• Short circuit detection of connected load
• Detection of 230VAC mains voltage failure
• Objects for heating request and cyclic movement of the valves
• Extensive scene functions
• Minimum flow temperature
• Diagnostics for each channel with 14Byte plain text object
• Integrated bus coupling unit
• 3 years warranty
17168
AKH-0800.02 HEATING ACTUATOR 8-FOLD, 4SU MDRC, 24-230VAC CLIMATE CONTROL
17494 BE-GT20W.01 Glass Push Button II Smart, 4/6/8/12-fold, Colored display and RGB status indicator PUSH BUTTONS

With 6 sensor areas, colored display and RGB status indicator Suitable as 4/6/8/12-fold push button. Integrated BCU


•  The buttons can be adjusted for 1 or 2 button operation
•  4 buttons can be reserved with 2 or 3 function levels (8/12-fold)
•  2 buttons to enter the function levels directly
•  Large, colored active display to indicate function and status
•  Symbols and plain text adjustable for each button/function
•  1 or 2 button operation for switching, dimming, shutters, values
•  Short/long button push with 2 objects
•  RGB status for each button separate controlable from each level
•  Indication of inside/outside temperature and time
•  Automatic display brightness via light sensor and day/night object
•  Slap function with additional switch channel
•  Recommended mounting height: 1,05 - 1,25m
•  Installation in socket, Dimensions (W x H): 92mm x 92mm
•  No additional power supply required
•  Integrated bus coupling unit 
•  3 years warranty

17494
BE-GT20W.01 GLASS PUSH BUTTON II SMART, 4/6/8/12-FOLD, COLORED DISPLAY AND RGB STATUS INDICATOR PUSH BUTTONS
9785 SCN-RT1UP.01 Room Thermostat flush mounted CLIMATE CONTROL
Room Thermostat to control the indoor Temperature. Working range from -10 to +50°C, for heating and cooling (Two-position, PI, PWM control). Programmable limit values, frost protection, storing of min. and max. temperature.

Fits all switches with 55mm rocker:
- BERKER S1, B1,B3, B7 glass
- GIRA Standard 55, E2, Event, Esprit
- JUNG A500, Aplus
- MERTEN M-Smart, M-Arc, M-Plan

Integrated bus coupling unit. Busconnector red/black included.
9785
SCN-RT1UP.01 ROOM THERMOSTAT FLUSH MOUNTED CLIMATE CONTROL
9978 BE-TA5502.01 BE-TA, KNX Push Button 2-fold PUSH BUTTONS
  • White Push Button with 2 rockers.
  • Single and dual button functions for dimming and blinds.
  • Distinction between short and long operation with 2 objects.


Fits all switches with 55mm rocker:
- BERKER S1, B1,B3, B7 glass
- GIRA Standard 55, E2, Event, Esprit
- JUNG A500, Aplus
- MERTEN M-Smart, M-Arc, M-Plan

Integrated bus coupling unit.

Busconnector red/black included
9978
BE-TA5502.01 BE-TA, KNX PUSH BUTTON 2-FOLD PUSH BUTTONS
9979 BE-TA5504.01 BE-TA, KNX Push Button 4-fold PUSH BUTTONS
  • White Push Button with 4 rockers.
  • Single and dual button functions for dimming and blinds.
  • Distinction between short and long operation with 2 objects.


Fits all switches with 55mm rocker:
- BERKER S1, B1,B3, B7 glass
- GIRA Standard 55, E2, Event, Esprit
- JUNG A500, Aplus
- MERTEN M-Smart, M-Arc, M-Plan

Integrated bus coupling unit.

Busconnector red/black included
9979
BE-TA5504.01 BE-TA, KNX PUSH BUTTON 4-FOLD PUSH BUTTONS
9980 BE-TA5506.01 BE-TA, KNX Push Button 6-fold PUSH BUTTONS
  • White Push Button with 6 rockers.
  • Single and dual button functions for dimming and blinds.
  • Distinction between short and long operation with 2 objects.


Fits all switches with 55mm rocker:
- BERKER S1, B1,B3, B7 glass
- GIRA Standard 55, E2, Event, Esprit
- JUNG A500, Aplus
- MERTEN M-Smart, M-Arc, M-Plan

Integrated bus coupling unit.

Busconnector red/black included
9980
BE-TA5506.01 BE-TA, KNX PUSH BUTTON 6-FOLD PUSH BUTTONS
9981 BE-TA5508.01 BE-TA, KNX Push Button 8-fold PUSH BUTTONS
  • White Push Button with 8 rockers.
  • Single and dual button functions for dimming and blinds.
  • Distinction between short and long operation with 2 objects.


Fits all switches with 55mm rocker:
- BERKER S1, B1,B3, B7 glass
- GIRA Standard 55, E2, Event, Esprit
- JUNG A500, Aplus
- MERTEN M-Smart, M-Arc, M-Plan

Integrated bus coupling unit.

Busconnector red/black included
9981
BE-TA5508.01 BE-TA, KNX PUSH BUTTON 8-FOLD PUSH BUTTONS
9982 BE-TA55P2.01 BE-TA PLUS, KNX Push Button 2-fold PUSH BUTTONS
  • White Push Button with 2 rockers.
  • Led indicators for each button, night light.
  • Extensive logical functions.
  • Single and dual button functions for dimming and blinds.
  • Distinction between short and long operation with 2 objects.


Fits all switches with 55mm rocker:
- BERKER S1, B1,B3, B7 glass
- GIRA Standard 55, E2, Event, Esprit
- JUNG A500, Aplus
- MERTEN M-Smart, M-Arc, M-Plan

Integrated bus coupling unit.

Busconnector red/black included
9982
BE-TA55P2.01 BE-TA PLUS, KNX PUSH BUTTON 2-FOLD PUSH BUTTONS
9983 BE-TA55P4.01 BE-TA PLUS, KNX Push Button 4-fold PUSH BUTTONS
  • White Push Button with 4 rockers.
  • Led indicators for each button, night light.
  • Extensive logical functions.
  • Single and dual button functions for dimming and blinds.
  • Distinction between short and long operation with 2 objects.


Fits all switches with 55mm rocker:
- BERKER S1, B1,B3, B7 glass
- GIRA Standard 55, E2, Event, Esprit
- JUNG A500, Aplus
- MERTEN M-Smart, M-Arc, M-Plan

Integrated bus coupling unit.

Busconnector red/black included
9983
BE-TA55P4.01 BE-TA PLUS, KNX PUSH BUTTON 4-FOLD PUSH BUTTONS
9984 BE-TA55P6.01 BE-TA PLUS, KNX Push Button 6-fold PUSH BUTTONS
  • White Push Button with 6 rockers.
  • Led indicators for each button, night light.
  • Extensive logical functions.
  • Single and dual button functions for dimming and blinds.
  • Distinction between short and long operation with 2 objects.


Fits all switches with 55mm rocker:
- BERKER S1, B1,B3, B7 glass
- GIRA Standard 55, E2, Event, Esprit
- JUNG A500, Aplus
- MERTEN M-Smart, M-Arc, M-Plan

Integrated bus coupling unit.

Busconnector red/black included
9984
BE-TA55P6.01 BE-TA PLUS, KNX PUSH BUTTON 6-FOLD PUSH BUTTONS
9985 BE-TA55P8.01 BE-TA PLUS, KNX Push Button 8-fold PUSH BUTTONS
  • White Push Button with 8 rockers.
  • Led indicators for each button, night light.
  • Extensive logical functions.
  • Single and dual button functions for dimming and blinds.
  • Distinction between short and long operation with 2 objects.


Fits all switches with 55mm rocker:
- BERKER S1, B1,B3, B7 glass
- GIRA Standard 55, E2, Event, Esprit
- JUNG A500, Aplus
- MERTEN M-Smart, M-Arc, M-Plan

Integrated bus coupling unit.

Busconnector red/black included
9985
BE-TA55P8.01 BE-TA PLUS, KNX PUSH BUTTON 8-FOLD PUSH BUTTONS
10145 SCN-RT6REG.01 Temperature controller 6-fold MRDC CLIMATE CONTROL
Room Thermostat with 6 channels to control thetemperature.

For heating and cooling (Two-position, PI, PWM control). Programmable limit values, frost protection, storing of min. and max. temperature.

Temperature values must be provided from the KNX/EIB bus.

Modular installation device for DIN 35mm rails.

Width 2 Space Units, integrated bus coupling unit.

Busconnector red/black included.

3 years warranty.
10145
SCN-RT6REG.01 TEMPERATURE CONTROLLER 6-FOLD MRDC CLIMATE CONTROL
10147 SCN-RT1UPE.01 Room Thermostat flush mounted, adjustable CLIMATE CONTROL
With adjustment knob, flush mounting.

Room Thermostat to control the indoor Temperature. Working range from -10 to +50°C, for heating and cooling (Two-position, PI, PWM control). Programmable limit values, frost protection, storing of min. and max. temperature.

Fits all switches with 55mm rocker:
- BERKER S1, B1,B3, B7 glass
- GIRA Standard 55, E2, Event, Esprit
- JUNG A500, Aplus
- MERTEN M-Smart, M-Arc, M-Plan

Integrated bus coupling unit. Busconnector red/black included.
10147
SCN-RT1UPE.01 ROOM THERMOSTAT FLUSH MOUNTED, ADJUSTABLE CLIMATE CONTROL
11518 BE-04000.01 Binary Input 4-fold, 2SU MDRC, Contact Inputs INPUTS
 
Description
 
The MDT Binary Input is available in 3 versions, input detection of 24VAC/DC signals, input detection of 230VAC signals and reading out of floating contacts. The Binary Input reacts depending on its programmed parameters and sends a telegram on the KNX bus.

  • Production in Germany, certified according to ISO 9001
  • Fully compatible to all KNX/EIB devices
  • To connect conventional push-buttons or window/auxiliary contacts
  • 4 integrated logical modules
  • Telegram rate limitation, cyclic sending of contact state programmable
  • NO or NC contact operation, programmable length of button push
  • Operation of blinds and shutters, 1 and 2 button operation
  • Forced setting function for each output
  • Operation with short/long button push and 2 objects
  • Counting of pulses, suitable for 30ms S0 pulses
  • Integrated bus coupling unit
  • 3 years warrant

 

 

11518
BE-04000.01 BINARY INPUT 4-FOLD, 2SU MDRC, CONTACT INPUTS INPUTS
12535 SCN-LSD01.01 Brightness Sensor/Controller with constant level light intensity SENSORS

Description

The Brightness Sensor/Controller with constant level light intensity is suited for ceiling mounting with 35mm Kaiser Socket.

  • Production in Germany certified according to ISO 9001
  • Brightness value can be read out via KNX Bus
  • Constant level light intensity
  • 35mm Kaiser socket (Installation depth 45mm)
  • Dimensions (W x H x D): 43mm x 43mm x 30mm
  • Integrated bus coupling unit
  • 3 years warranty
12535
SCN-LSD01.01 BRIGHTNESS SENSOR/CONTROLLER WITH CONSTANT LEVEL LIGHT INTENSITY SENSORS
14095 SCN-DALI64.02 DaliControl IP Gateway, 4SU MDRC, up to 64 ECG GATEWAYS
The MDT DaliControl IP Gateway receive KNX/EIB telegrams and enables the classic control of 16 DALI groups plus individual control of the ECG.
Production in Germany certified according to ISO 9001
Supports different light types
Dimming curve matches the human perception
Simultanous dimming
Tracking of operating hours and switch cycles
Display and reporting of light and ECG errors
16 scenes programmable, integrated effect module
Control of battery light emergency lights (EN62386-202)
Simple change of the coniguration without using ETS
Setting of light scenes without any KNX modules
Simple group attribution directly on the device
Dali Commissioning via Webbrowser or directly on the
device display
Individual control up to 64 ECG
Extensive application with ETS plugin
Modular installation device for DIN 35mm rails
Integrated bus coupling unit
3 years warranty
14095
SCN-DALI64.02 DALICONTROL IP GATEWAY, 4SU MDRC, UP TO 64 ECG GATEWAYS
14796 SCN-LCDGW.01 Glass Central Operation Unit, with 4 sensor areas CLIMATE CONTROL

The MDT Glass Central Operation Unit is used to control the indoor temperature, it has a working range from -10 to +50°C.
The MDT Glass Central Operation Unit detects the temperature and releases telegrams in dependence on its parameterisation.
The large LCD display optionally shows inside/outside temperature, the desired value and the current time.
Also user defined messages and 14byte telegramms from the KNX bus can be displayed.


Production in Germany certified according to ISO 9001
Large LCD Display
Room temperature controller with temperature sensor (-10 to +50°C)
Comfort-/night-/standby-/frost protection operation
Selectable temperature controller (PI, Two-position, PWM)
Status feedback by HVAC and RHCC status objects
Limit values min/max, frost-/heat protection alarm, min/max memory
Given value is stored at voltage failure
Indication of inside/outside temperature, desired value and time
Indication of user defined messages (1bit)
Indication of text telegramms (14byte)
Two direct switching functions (e.g. light, shutter
20 switching functions via menu
Dimming/shutter/switching/sending of values/scenes
Ventilation functions (hand or automatic)
Integrated time switch with power reserve
Dimensions 92mm x 92mm
Recommended mounting height: 1,6m
Integrated bus coupling unit
3 years warranty

14796
SCN-LCDGW.01 GLASS CENTRAL OPERATION UNIT, WITH 4 SENSOR AREAS CLIMATE CONTROL
14799 SCN-RT1GS.01 Glass Room Temperature Controller CLIMATE CONTROL

The MDT Room Temperature Controller is used to control the indoor temperature, it has a working range from -10 to +50°C.
The MDT Room Temperature Controller detects the temperature and releases telegrams in dependence on its parameterisation.

Production in Germany certified according to ISO 9001
Large LCD Display
Room temperature controller with temperature sensor (-10 to +50°C)
Comfort-/night-/standby-/frost protection operation
Selectable temperature controller (PI, Two-position, PWM)
Status feedback by HVAC and RHCC status objects
Limit values min/max, frost-/heat protection alarm, min/max memory
Given value is stored at voltage failure
Indication of inside/outside temperature, desired value and time
Indication of user defined messages (1bit)
Indication of text telegramms (14byte)
Two direct switching functions (e.g. light, shutter
Ventilation functions (hand or automatic)
Dimensions 92mm x 92mm
Recommended mounting height: 1,6m
Integrated bus coupling unit
3 years warranty

14799
SCN-RT1GS.01 GLASS ROOM TEMPERATURE CONTROLLER CLIMATE CONTROL
15949 RF-AKK1ST.01 KNX RF+ Switch Actuator 1-fold,16A, 230VAC ACTUATORS - OUTPUTS
Actuador para enchufes RF 16A, 230VAC
15949
RF-AKK1ST.01 KNX RF+ SWITCH ACTUATOR 1-FOLD,16A, 230VAC ACTUATORS - OUTPUTS
16055 SCN-RTC20.01 Time Switch with LCD display, 6SU, with 20 channels. 6 cycle times each channel TIME TRANSMITTERS - SWITCHES
• Time switch with 20 channels (6 cycle times each channel)
• Direct switching of the 20 channels (Manual Mode)
• Daily/weekly/astro switching function
• Large LCD Display
• Power reserve
• Cycle time adjustable by the ETS and directly at the device
• Cyclic sending of the time on the KNX bus (Master)
• Clock time adjustment by bus telegram (Slave)
• 8 logical blocks with 4 inputs
• Modular installation device for DIN 35mm rails
• Integrated bus coupling unit
• 3 years warranty
16055
SCN-RTC20.01 TIME SWITCH WITH LCD DISPLAY, 6SU, WITH 20 CHANNELS. 6 CYCLE TIMES EACH CHANNEL TIME TRANSMITTERS ...
16057 AZI-0616.01 Switch Actuator 6-fold, 8SU MDRC, 230VAC, 16/20A, C-Load 200µF, with active power measurement ACTUATORS - OUTPUTS
The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 6 independent electrical loads.

The MDT Switch Actuator offers current measurement for each channel and measurement of the total current. In dependence on the parameterization the measured data can be transmit in different data formats (mA/A/kW) onto the KNX bus. Additionally the device provides an hour/service interval meter. The integrated counter allows to capture the active power consumption exactly.

  • Production in Germany, certified according to ISO 9001
  • Push Button and LED indicator for each channel
  • NO and NC contact operation
  • Time functions (switch-on/switch-off delay, staircase light function)
  • Status response (active/passive) for each channel
  • Logical linking of binary data, 8 scenes per channel
  • Hour meter
  • Central switching functions and block functions
  • Programmable behavior in case of bus voltage failure or return
  • Each contact has an own supply phase
  • Integrated True RMS current measurement (current, kW)
  • Current measurement range 10mA - 20A
  • Active power measurement with integrated counter (Wh/kWh)
  • Integrated bus coupling unit
  • 3 years warranty
16057
AZI-0616.01 SWITCH ACTUATOR 6-FOLD, 8SU MDRC, 230VAC, 16/20A, C-LOAD 200ΜF, WITH ACTIVE POWER MEASUREMENT ACTUATORS - OUTPUTS
16060 RF-LK001.02 KNX RF+ Line Coupler Flush mounted, commissioning with ETS5 RF
The MDT KNX RF+ Line Coupler connects MDT KNX RF+ devices to the KNX bus. The Line Coupler offers extensive filter functions to reduce the KNX RF+ bus load.
Production in Germany, certified according to ISO 9001
KNX RF+ line coupler to connect MDT KNX RF+ devices like
MDT Push Button RF+ or MDT Glass Push Button RF+
New KNX RF+ protocol in system mode
Commissioning with ETS 3/4/5
Compatible to the new KNX RF+ specification
Flush mounted in socket
Dimensions (W x H x D): 41mm x 41mm x 22mm
Integrated bus coupling unit
3 years warranty
16060
RF-LK001.02 KNX RF+ LINE COUPLER FLUSH MOUNTED, COMMISSIONING WITH ETS5 RF
16746 AIO-0210V.01 Analog Actuator 2-fold, flush mounted, In-/Output shiftable ACTUATORS - OUTPUTS

• Production in Germany, certified according to ISO 9001
• Each channel can be configured indepentently (In-/output)
• In/outputs are galvanically isolated from the bus
• In/outputs are galvanically connected together
• Voltage for output operation is generated inside the actuator
• No external power supply required
• Input operation 0-10V/2-10V or 0-20mA/4-20mA (switchable)
 - Conversation of measuring unit and DPT can be parameterized
 - Min/max function, wire breakage detection
 - Threshold and traffic light function
• Output functions 0-10V:
 - Control by 1Byte, 2Byte float or 1Bit objects
 - Day/night function to limit control value
 - Emergency mode if given value fails
• Flush mounted in socket
• Dimensions (W x H x D): 41mm x 41mm x 22mm
• Integrated bus coupling unit 

16746
AIO-0210V.01 ANALOG ACTUATOR 2-FOLD, FLUSH MOUNTED, IN-/OUTPUT SHIFTABLE ACTUATORS - OUTPUTS
16998 STC-0640.01 Bus Power Supply with diagnosis function, 4SU MDRC, 640mA SYSTEM DEVICES

The MDT KNX Power Supply with integrated choke supplies the KNX Bus with a constant, stabilized 30VDC voltage. The integrated bus coupling unit with diagnosis function monitors the bus voltage, bus current, bus overload and bus voltafe failure/return. All events are stored with time stamp in the internal ring buffer.The current operating status is indicated via 8 colored LED on top of the device:

Production in Germany, certified according to ISO 9001
KNX power supply with integrated choke
Mains voltage 230VAC
Short-circuit-proof
Overload safe
With additionally choke free output
Integrated bus coupling unit with diagnosis function:
- Bus voltage, bus current, bus overload
- Bus voltage failure/return
- All events are stored with time stamp in a ring buffer
- Read out of the ring buffer by 14Byte telegram
- Safety functions to detect a failed device in the KNX line
Modular installation device for DIN 35mm rails
Integrated bus coupling unit
3 years warranty

16998
STC-0640.01 BUS POWER SUPPLY WITH DIAGNOSIS FUNCTION, 4SU MDRC, 640MA SYSTEM DEVICES
17106 BE-02230.01 Universal Interface 2-fold, Flush mounted, for 230VAC signals INPUTS

The inputs of the MDT Universal Interface react depending on their programmed parameters and send a telegram on the KNX bus.
You can connect conventional push-buttons or auxiliary contacts (e.g. door and window contacts) to the device.

• Production in Germany, certified according to ISO 9001
• To connect push-buttons or auxiliary contacts
• Each output can be set as 1,5mA low current output for LED (Only for Universal Interface with floating contacts)
• 4 integrated logical modules, sending od scenes
• NO or NC contact operation, programmable length of button push
• Operation of blinds and shutters, 1 and 2 button operation
• Forced setting function for each output
• Operation with short/long button push and 2 objects
• Counting of pulses
• Cyclical sending of contact state programmable
• Flush mounted (length of connection cables: 22cm)
• Dimensions (W x H x D): 41mm x 41mm x 12mm
• Integrated bus coupling unit
• 3 years warranty

 

17106
BE-02230.01 UNIVERSAL INTERFACE 2-FOLD, FLUSH MOUNTED, FOR 230VAC SIGNALS INPUTS
17160 STR-0640.01 Redundant Bus Power Supply with diagnosis function to increase operation reliability, 6SU MDRC, 640mA SYSTEM DEVICES
Redundant Bus Power Supply with diagnosis function to increase operation reliability, 6SU MDRC, 640mA
Nominal current 640mA, continuous current 960mA, peak 1200mA
• KNX power supply with integrated choke
• Two integrated power supplies for redundancy
• Mains voltage 230VAC (separate FI circuits possible)
• If one mains voltage or one of the internal power supplies fails,
the KNX bus voltage keeps stable by the second power supply
• Failure message by a telegram
• Short-circuit-proof
• Overload safe
• With additionally choke free output
• Integrated bus coupling unit with diagnosis function:
- Bus voltage, bus current, bus overload
- Bus voltage failure/return
- All events are stored with time stamp in a ring buffer
- Read out of the ring buffer by 14Byte telegram
- Safety functions to detect a failed device in the KNX line
• 3 years warranty
17160
STR-0640.01 REDUNDANT BUS POWER SUPPLY WITH DIAGNOSIS FUNCTION TO INCREASE OPERATION RELIABILITY, 6SU MDRC, 640MA SYSTEM DEVICES
17161 JAL-01UP.02 Shutter Actuator 1-fold, flush mounted, 6A, 230VAC ACTUATORS - OUTPUTS
Shutter Actuator to feed 230VAC shutter motors up to 300W
With monostable relays, current max. 6A with ohmic load
• Extensive function extension
• Lockable manual operation and LED indicator for each channel
• Operation mode blind/shutter
• Travel-, pause-at-change-of-direction and step time adjustable
• Separate travel time for up and down adjustable
• Tip operation for accurate positioning
• Extended 1Bit automatic positions and logical functions
• 1Byte absolute positioning for shutter and blinds
• Alarm, central- and block functions
• Behavior after alarms and block separately adjustable
• Priority/forced operation with automatic release time
• Ventilation function (window open/tilt)
• Automatic sun protection with sun
position calculation (only JAL-0210.02)
• Adjustable behavior in case of bus voltage failure or return
• Two contacts share one supply phase
• Dimensions (W x H x D): 41mm x 41mm x 22mm
• Integrated bus coupling unit
• 3 years warrant
17161
JAL-01UP.02 SHUTTER ACTUATOR 1-FOLD, FLUSH MOUNTED, 6A, 230VAC ACTUATORS - OUTPUTS
17162 JAL-0210.02 Shutter Actuator 2-fold, 2SU MDRC, 10A, 230VAC ACTUATORS - OUTPUTS
Shutter Actuator to feed 230VAC shutter motors up to 600W
With monostable relays, current max. 10A with ohmic load
• Extensive function extension
• Lockable manual operation and LED indicator for each channel
• Operation mode blind/shutter
• Travel-, pause-at-change-of-direction and step time adjustable
• Separate travel time for up and down adjustable
• Tip operation for accurate positioning
• Extended 1Bit automatic positions and logical functions
• 1Byte absolute positioning for shutter and blinds
• Alarm, central- and block functions
• Behavior after alarms and block separately adjustable
• Priority/forced operation with automatic release time
• Ventilation function (window open/tilt)
• Automatic sun protection with sun
position calculation
• Adjustable behavior in case of bus voltage failure or return
• Two contacts share one supply phase
• Integrated bus coupling unit
• 3 years warranty
17162
JAL-0210.02 SHUTTER ACTUATOR 2-FOLD, 2SU MDRC, 10A, 230VAC ACTUATORS - OUTPUTS
17163 JAL-0410.02 Shutter Actuator 4-fold, 4SU MDRC, 10A, 230VAC ACTUATORS - OUTPUTS
Shutter Actuator to feed 230VAC shutter motors up to 600W
With monostable relays, current max. 10A with ohmic load
• Extensive function extension
• Lockable manual operation and LED indicator for each channel
• Operation mode blind/shutter
• Travel-, pause-at-change-of-direction and step time adjustable
• Separate travel time for up and down adjustable
• Tip operation for accurate positioning
• Extended 1Bit automatic positions and logical functions
• 1Byte absolute positioning for shutter and blinds
• Alarm, central- and block functions
• Behavior after alarms and block separately adjustable
• Priority/forced operation with automatic release time
• Ventilation function (window open/tilt)
• Automatic sun protection with sun
position calculation
• Adjustable behavior in case of bus voltage failure or return
• Two contacts share one supply phase
• Integrated bus coupling unit
• 3 years warranty
17163
JAL-0410.02 SHUTTER ACTUATOR 4-FOLD, 4SU MDRC, 10A, 230VAC ACTUATORS - OUTPUTS
17164 JAL-0810.02 Shutter Actuator 8-fold, 8SU MDRC, 10A, 230VAC ACTUATORS - OUTPUTS
Shutter Actuator to feed 230VAC shutter motors up to 600W
With monostable relays, current max. 10A with ohmic load
• Extensive function extension
• Lockable manual operation and LED indicator for each channel
• Operation mode blind/shutter
• Travel-, pause-at-change-of-direction and step time adjustable
• Separate travel time for up and down adjustable
• Tip operation for accurate positioning
• Extended 1Bit automatic positions and logical functions
• 1Byte absolute positioning for shutter and blinds
• Alarm, central- and block functions
• Behavior after alarms and block separately adjustable
• Priority/forced operation with automatic release time
• Ventilation function (window open/tilt)
• Automatic sun protection with sun
position calculation
• Adjustable behavior in case of bus voltage failure or return
• Two contacts share one supply phase
• Integrated bus coupling unit
• 3 years warranty
17164
JAL-0810.02 SHUTTER ACTUATOR 8-FOLD, 8SU MDRC, 10A, 230VAC ACTUATORS - OUTPUTS
17165 JAL-0410D.02 Shutter Actuator 4-fold, 4SU MDRC, 8A, 24VDC ACTUATORS - OUTPUTS
Shutter Actuator to feed 24VDC shutter motors up to 180W
With monostable relays, current max. 8A with ohmic load
• Extensive function extension
• Lockable manual operation and LED indicator for each channel
• Operation mode blind/shutter
• Travel-, pause-at-change-of-direction and step time adjustable
• Separate travel time for up and down adjustable
• Tip operation for accurate positioning
• Extended 1Bit automatic positions and logical functions
• 1Byte absolute positioning for shutter and blinds
• Alarm, central- and block functions
• Behavior after alarms and block separately adjustable
• Priority/forced operation with automatic release time
• Ventilation function (window open/tilt)
• Automatic sun protection with sun
position calculation
• To feed 24VDC motors with 2 connections
• Integrated commutator circuit
• Adjustable behavior in case of bus voltage failure or return
• Integrated bus coupling unit
• 3 years warranty
17165
JAL-0410D.02 SHUTTER ACTUATOR 4-FOLD, 4SU MDRC, 8A, 24VDC ACTUATORS - OUTPUTS
17166 JAL-0810D.02 Shutter Actuator 8-fold, 8SU MDRC, 8A, 24VDC ACTUATORS - OUTPUTS
Shutter Actuator to feed 24VDC shutter motors up to 180W
With monostable relays, current max. 8A with ohmic load
• Extensive function extension
• Lockable manual operation and LED indicator for each channel
• Operation mode blind/shutter
• Travel-, pause-at-change-of-direction and step time adjustable
• Separate travel time for up and down adjustable
• Tip operation for accurate positioning
• Extended 1Bit automatic positions and logical functions
• 1Byte absolute positioning for shutter and blinds
• Alarm, central- and block functions
• Behavior after alarms and block separately adjustable
• Priority/forced operation with automatic release time
• Ventilation function (window open/tilt)
• Automatic sun protection with sun
position calculation
• To feed 24VDC motors with 2 connections
• Integrated commutator circuit
• Adjustable behavior in case of bus voltage failure or return
• Integrated bus coupling unit
• 3 years warranty
17166
JAL-0810D.02 SHUTTER ACTUATOR 8-FOLD, 8SU MDRC, 8A, 24VDC ACTUATORS - OUTPUTS
17303 SCN-IP100.02 IP Router, 2U SYSTEM DEVICES

KNX IP Router: This Interface offers the same functions as the IP interface, but the device routes telegrams as a line coupler using the the LAN.

IP Interface/Router:
To enable bidirectional communication between PC and the KNX bus TCP/IP
4 simultaneous connections possible
Long frame support for ETS5
Programming the KNX bus via TCP/IP
Power supply by KNX bus, no external bus power supply required
Encrypted transmission at sending emails
Time server functions to send time and date on the KNX bus
Production in Germany, certified according to ISO 9001
Modular installation device for DIN 35mm rails
Integrated bus coupling unit
3 years warranty

 

17303
SCN-IP100.02 IP ROUTER, 2U SYSTEM DEVICES
17604 SCN-LOG1.02 Logical Module, 2U CONTROLLERS
•  8 logical blocks with 8 inputs each (8 objects)
•  Delta-T temperature switch, 2 temperature modules
•  Value inverter for Byte objects, Telegram rate limitation
•  4 format converter
•  4 modules to filter ON and/or OFF telegrams
•  8 multiplexer modules to control partition walls in conference rooms
•  4 sequencer modules to generate multiple telegrams
•  4 time modules with compare function and time delay
•  4 LED indicators for internal and external objects
•  Integrated bus coupling unit
•  3 years warranty
17604
SCN-LOG1.02 LOGICAL MODULE, 2U CONTROLLERS
18628 SCN-P360K4.02 Presence Detector 360°, 4 Pyro, with orientation light and constant level light intensity DETECTORS
Presence Detector with light sensor plus constant level light intensity. Captures the smallest movements with its built in pyrodetectors and high resolution lens.
  • Production in Germany, certified according to ISO 9001
  • Presence detector with light sensor
  • 4 pyro detectors with high resolution lens
  • Programmable sensibility (Not SCN-P360D.01)
  • Switching function depending on brightness and movement
  • Brighness value can be read out
  • Master/slave function programmable
  • Scene functions
  • Day/Night function, monitoring with messages
  • 2 zone operation (SCN-P360x4.01 only)
  • HVAC control channel (adjustable over a certain period)
  • Orientation light (Brightness and time adjustable)
  • Lowerable sensitivity during night and for standby
  • Integrated bus coupling unit
  • 3 years warranty
18628
SCN-P360K4.02 PRESENCE DETECTOR 360°, 4 PYRO, WITH ORIENTATION LIGHT AND CONSTANT LEVEL LIGHT INTENSITY DETECTORS
11209 SCN-WS3HW.01 KNX Weather Station Home SENSORS

Description

Weather Station Home
  • 3 channels for sun protection to control blind/shutter
  • Sun protection up to three facades
  • Offers wide functions to control facades (2 switching tresholds,
    teach in function)
  • Central shutter control for Up/Down via brightness
  • Brightness value for east, south, west, twilight
  • Generates a day/night object
  • Wind speed value, alarm if wind speed exceeds limit
  • Temperature value
  • Suited to control facades at home
  • Installation on wall or pole
  • 5m connection cable
  • No additional power supply required
  • Integrated bus coupling unit (control unit)
  • 3 years warranty
11209
SCN-WS3HW.01 KNX WEATHER STATION HOME SENSORS
11505 SCN-RS1R.01 Rain Sensor KNX, surface mounted SENSORS
  • Interface, automatically heating to keep the sensor area dry
  • Heating operation by choke free output STV 640 or external 24VDC power supply
  • Current consuption of heating is 100mA
  • 5m bus connection cable
  • Stainless fastening angle included in delivery
  • Dimensions (W x H x D): 67mm x 67mm x 29mm
  • Integrated bus coupling unit
  • 3 years warranty

 

11505
SCN-RS1R.01 RAIN SENSOR KNX, SURFACE MOUNTED SENSORS
13310 RF-GTA4S.01 KNX RF + Glass Push Button 4-fold Plus with actuator PUSH BUTTONS

Description

The MDT KNX RF+ Glas Push Button releases KNX telegrams after touching the sensor areas on top, 1 or 2 button operation can be parameterized.

  • Production in Germany, certified according to ISO 9001
  • Commissioning with ETS3/4/5
  • New KNX RF+ protocol in system mode
  • Sensor areas can be parameterized for 1 or 2 button operation
  • NO or NC contact operation, programmable length of button push
  • Forced setting function for each output
  • Operation with short/long button push and 2 objects
  • Operation of blinds and shutters, 1 and 2 button operation
  • Can be set as switching actuator or shutter actuator
  • 4 integrated logical functions, cleaning function
  • Additional switching channel (e.g. panic function)
  • Connection via KNX RF+ Line Coupler
  • Compatible to the new KNX RF+ specification
  • Surrounding orientation light with day/night object
  • Title block to insert behind glas front, labeling fim included
  • To replace conventionel push buttons
  • To upgrade your installation without placing KNX bus cables
  • Power supply 230VAC
  • Installation with support ring (included in delivery)
  • Integrated bus coupling unit
  • 3 years warranty
13310
RF-GTA4S.01 KNX RF + GLASS PUSH BUTTON 4-FOLD PLUS WITH ACTUATOR PUSH BUTTONS
13312 RF-GTA8W.01 KNX RF + Glass Push Button 8-fold Plus with actuator PUSH BUTTONS
The MDT KNX RF+ Glas Push Button releases KNX telegrams after touching the sensor areas on top, 1 or 2 button operation can be parameterized.

  • Production in Germany, certified according to ISO 9001
  • Commissioning with ETS3/4/5
  • New KNX RF+ protocol in system mode
  • Sensor areas can be parameterized for 1 or 2 button operation
  • NO or NC contact operation, programmable length of button push
  • Forced setting function for each output
  • Operation with short/long button push and 2 objects
  • Operation of blinds and shutters, 1 and 2 button operation
  • Can be set as switching actuator or shutter actuator
  • 4 integrated logical functions, cleaning function
  • Additional switching channel (e.g. panic function)
  • Connection via KNX RF+ Line Coupler
  • Compatible to the new KNX RF+ specification
  • Surrounding orientation light with day/night object
  • Title block to insert behind glas front, labeling fim included
  • To replace conventionel push buttons
  • To upgrade your installation without placing KNX bus cables
  • Power supply 230VAC
  • Installation with support ring (included in delivery)
  • Integrated bus coupling unit
  • 3 years warranty
13312
RF-GTA8W.01 KNX RF + GLASS PUSH BUTTON 8-FOLD PLUS WITH ACTUATOR PUSH BUTTONS
13314 RF-TA55P2.01 KNX RF + Push Button 2-fold Plus, flush mounted, White matt finish PUSH BUTTONS

Description

The MDT KNX Push Button releases KNX telegrams after pushing the buttons on top.

  • Production in Germany, certified according to ISO 9001
  • Commisioning with ETS3/4/5
  • New KNX RF+ protocol in system mode
  • Fits all switches with 55mm rocker
  • Push Buttons can be parameterized for 1 or 2 button operation
  • NO or NC contact operation, programmable length of button push
  • Forced setting function for each output
  • Operation with short/long button push and 2 objects
  • 2 integrated logical modules
  • Operation of blinds and shutters, 1 and 2 button operation
  • 2-fold switching actuator or 1-fold shutter actuator (RF-TA55xA.01
  • Connection via MDT KNX RF+ line coupler
  • Compatible to the new KNX RF+ specification
  • Centered title block with cover for individual marking
  • To replace conventionel push buttons
  • Power supply 230VAC
  • Integrated bus coupling unit, installation with enclosed support ring
  • 3 years warranty
13314
RF-TA55P2.01 KNX RF + PUSH BUTTON 2-FOLD PLUS, FLUSH MOUNTED, WHITE MATT FINISH PUSH BUTTONS
13315 RF-TA55P4.01 KNX RF + Push Button 4-fold Plus, flush mounted, White matt finish PUSH BUTTONS
The MDT KNX Push Button releases KNX telegrams after pushing the buttons on top.

  • Production in Germany, certified according to ISO 9001
  • Commisioning with ETS3/4/5
  • New KNX RF+ protocol in system mode
  • Fits all switches with 55mm rocker
  • Push Buttons can be parameterized for 1 or 2 button operation
  • NO or NC contact operation, programmable length of button push
  • Forced setting function for each output
  • Operation with short/long button push and 2 objects
  • 2 integrated logical modules
  • Operation of blinds and shutters, 1 and 2 button operation
  • 2-fold switching actuator or 1-fold shutter actuator (RF-TA55xA.01
  • Connection via MDT KNX RF+ line coupler
  • Compatible to the new KNX RF+ specification
  • Centered title block with cover for individual marking
  • To replace conventionel push buttons
  • Power supply 230VAC
  • Integrated bus coupling unit, installation with enclosed support ring
  • 3 years warranty
13315
RF-TA55P4.01 KNX RF + PUSH BUTTON 4-FOLD PLUS, FLUSH MOUNTED, WHITE MATT FINISH PUSH BUTTONS
13316 RF-TA55P6.01 KNX RF + Push Button 6-fold Plus, flush mounted, White matt finish PUSH BUTTONS
The MDT KNX Push Button releases KNX telegrams after pushing the buttons on top.

  • Production in Germany, certified according to ISO 9001
  • Commisioning with ETS3/4/5
  • New KNX RF+ protocol in system mode
  • Fits all switches with 55mm rocker
  • Push Buttons can be parameterized for 1 or 2 button operation
  • NO or NC contact operation, programmable length of button push
  • Forced setting function for each output
  • Operation with short/long button push and 2 objects
  • 2 integrated logical modules
  • Operation of blinds and shutters, 1 and 2 button operation
  • 2-fold switching actuator or 1-fold shutter actuator (RF-TA55xA.01
  • Connection via MDT KNX RF+ line coupler
  • Compatible to the new KNX RF+ specification
  • Centered title block with cover for individual marking
  • To replace conventionel push buttons
  • Power supply 230VAC
  • Integrated bus coupling unit, installation with enclosed support ring
  • 3 years warranty
13316
RF-TA55P6.01 KNX RF + PUSH BUTTON 6-FOLD PLUS, FLUSH MOUNTED, WHITE MATT FINISH PUSH BUTTONS
13317 RF-TA55P8.01 KNX RF + Push Button 8-fold Plus, flush mounted, White matt finish PUSH BUTTONS
The MDT KNX Push Button releases KNX telegrams after pushing the buttons on top.

  • Production in Germany, certified according to ISO 9001
  • Commisioning with ETS3/4/5
  • New KNX RF+ protocol in system mode
  • Fits all switches with 55mm rocker
  • Push Buttons can be parameterized for 1 or 2 button operation
  • NO or NC contact operation, programmable length of button push
  • Forced setting function for each output
  • Operation with short/long button push and 2 objects
  • 2 integrated logical modules
  • Operation of blinds and shutters, 1 and 2 button operation
  • 2-fold switching actuator or 1-fold shutter actuator (RF-TA55xA.01
  • Connection via MDT KNX RF+ line coupler
  • Compatible to the new KNX RF+ specification
  • Centered title block with cover for individual marking
  • To replace conventionel push buttons
  • Power supply 230VAC
  • Integrated bus coupling unit, installation with enclosed support ring
  • 3 years warranty
13317
RF-TA55P8.01 KNX RF + PUSH BUTTON 8-FOLD PLUS, FLUSH MOUNTED, WHITE MATT FINISH PUSH BUTTONS
13318 RF-TA55A2.01 KNX RF+ Push Button 2-fold Plus with actuator, white matt finish PUSH BUTTONS
The MDT KNX Push Button releases KNX telegrams after pushing the buttons on top.

  • Production in Germany, certified according to ISO 9001
  • Commisioning with ETS3/4/5
  • New KNX RF+ protocol in system mode
  • Fits all switches with 55mm rocker
  • Push Buttons can be parameterized for 1 or 2 button operation
  • NO or NC contact operation, programmable length of button push
  • Forced setting function for each output
  • Operation with short/long button push and 2 objects
  • 2 integrated logical modules
  • Operation of blinds and shutters, 1 and 2 button operation
  • 2-fold switching actuator or 1-fold shutter actuator (RF-TA55xA.01
  • Connection via MDT KNX RF+ line coupler
  • Compatible to the new KNX RF+ specification
  • Centered title block with cover for individual marking
  • To replace conventionel push buttons
  • Power supply 230VAC
  • Integrated bus coupling unit, installation with enclosed support ring
  • 3 years warranty
13318
RF-TA55A2.01 KNX RF+ PUSH BUTTON 2-FOLD PLUS WITH ACTUATOR, WHITE MATT FINISH PUSH BUTTONS
13319 RF-TA55A4.01 KNX RF+ Push Button 4-fold Plus with actuator, white matt finish PUSH BUTTONS
The MDT KNX Push Button releases KNX telegrams after pushing the buttons on top.

  • Production in Germany, certified according to ISO 9001
  • Commisioning with ETS3/4/5
  • New KNX RF+ protocol in system mode
  • Fits all switches with 55mm rocker
  • Push Buttons can be parameterized for 1 or 2 button operation
  • NO or NC contact operation, programmable length of button push
  • Forced setting function for each output
  • Operation with short/long button push and 2 objects
  • 2 integrated logical modules
  • Operation of blinds and shutters, 1 and 2 button operation
  • 2-fold switching actuator or 1-fold shutter actuator (RF-TA55xA.01
  • Connection via MDT KNX RF+ line coupler
  • Compatible to the new KNX RF+ specification
  • Centered title block with cover for individual marking
  • To replace conventionel push buttons
  • Power supply 230VAC
  • Integrated bus coupling unit, installation with enclosed support ring
  • 3 years warranty
13319
RF-TA55A4.01 KNX RF+ PUSH BUTTON 4-FOLD PLUS WITH ACTUATOR, WHITE MATT FINISH PUSH BUTTONS
13320 RF-TA55A6.01 KNX RF+ Push Button 6-fold Plus with actuator, white matt finish PUSH BUTTONS
The MDT KNX Push Button releases KNX telegrams after pushing the buttons on top.

  • Production in Germany, certified according to ISO 9001
  • Commisioning with ETS3/4/5
  • New KNX RF+ protocol in system mode
  • Fits all switches with 55mm rocker
  • Push Buttons can be parameterized for 1 or 2 button operation
  • NO or NC contact operation, programmable length of button push
  • Forced setting function for each output
  • Operation with short/long button push and 2 objects
  • 2 integrated logical modules
  • Operation of blinds and shutters, 1 and 2 button operation
  • 2-fold switching actuator or 1-fold shutter actuator (RF-TA55xA.01
  • Connection via MDT KNX RF+ line coupler
  • Compatible to the new KNX RF+ specification
  • Centered title block with cover for individual marking
  • To replace conventionel push buttons
  • Power supply 230VAC
  • Integrated bus coupling unit, installation with enclosed support ring
  • 3 years warranty
13320
RF-TA55A6.01 KNX RF+ PUSH BUTTON 6-FOLD PLUS WITH ACTUATOR, WHITE MATT FINISH PUSH BUTTONS
13321 RF-TA55A8.01 KNX RF+ Push Button 8-fold Plus with actuator, white matt finish PUSH BUTTONS
The MDT KNX Push Button releases KNX telegrams after pushing the buttons on top.

  • Production in Germany, certified according to ISO 9001
  • Commisioning with ETS3/4/5
  • New KNX RF+ protocol in system mode
  • Fits all switches with 55mm rocker
  • Push Buttons can be parameterized for 1 or 2 button operation
  • NO or NC contact operation, programmable length of button push
  • Forced setting function for each output
  • Operation with short/long button push and 2 objects
  • 2 integrated logical modules
  • Operation of blinds and shutters, 1 and 2 button operation
  • 2-fold switching actuator or 1-fold shutter actuator (RF-TA55xA.01
  • Connection via MDT KNX RF+ line coupler
  • Compatible to the new KNX RF+ specification
  • Centered title block with cover for individual marking
  • To replace conventionel push buttons
  • Power supply 230VAC
  • Integrated bus coupling unit, installation with enclosed support ring
  • 3 years warranty
13321
RF-TA55A8.01 KNX RF+ PUSH BUTTON 8-FOLD PLUS WITH ACTUATOR, WHITE MATT FINISH PUSH BUTTONS
13322 RF-AKK1UP.01 KNX RF+ Switch Actuator 1-fold, Flush mounted, 230VAC, 10A ACTUATORS - OUTPUTS

Description

The MDT KNX RF+ Switch Actuator receives KNX/EIB telegrams ans switchs up to 2 indipendent electrical loads.
Each output uses a monostable relay.

  • Production in Germany, certified according to ISO 9001
  • Commissioning with ETS3/4/5
  • New KNX RF+ protocol in system mode
  • NO and NC contact operation
  • Time functions (switch-on/switch-off delay, staircase light function)
  • Status response (active/passive) for each channel
  • Logical linking of binary data
  • 8 scenes per channel
  • Central switching functions and block functions
  • Programmable behavior in case of bus voltage failure or return
  • Flush mounted in socket
  • Connection via MDT KNX RF+ Line Coupler
  • Compatible to the new KNX RF+ specification
  • To upgrade your installation without placing KNX bus cables
  • Power supply 230VAC
  • Dimensions (W x H x D): 41mm x 41mm x 22mm
  • Integrated bus coupling unit
  • 3 years warranty
13322
RF-AKK1UP.01 KNX RF+ SWITCH ACTUATOR 1-FOLD, FLUSH MOUNTED, 230VAC, 10A ACTUATORS - OUTPUTS
13323 RF-AKK2UP.01 KNX RF+ Switch Actuator 2-fold, Flush mounted, 230VAC, 10A ACTUATORS - OUTPUTS

Description

The MDT KNX RF+ Switch Actuator receives KNX/EIB telegrams ans switchs up to 2 indipendent electrical loads.
Each output uses a monostable relay.

  • Production in Germany, certified according to ISO 9001
  • Commissioning with ETS3/4/5
  • New KNX RF+ protocol in system mode
  • NO and NC contact operation
  • Time functions (switch-on/switch-off delay, staircase light function)
  • Status response (active/passive) for each channel
  • Logical linking of binary data
  • 8 scenes per channel
  • Central switching functions and block functions
  • Programmable behavior in case of bus voltage failure or return
  • Flush mounted in socket
  • Connection via MDT KNX RF+ Line Coupler
  • Compatible to the new KNX RF+ specification
  • To upgrade your installation without placing KNX bus cables
  • Power supply 230VAC
  • Dimensions (W x H x D): 41mm x 41mm x 22mm
  • Integrated bus coupling unit
  • 3 years warranty
13323
RF-AKK2UP.01 KNX RF+ SWITCH ACTUATOR 2-FOLD, FLUSH MOUNTED, 230VAC, 10A ACTUATORS - OUTPUTS
13324 RF-JAL1UP.01 KNX RF + Shutter Actuator 1-fold, flush mounted, 6A, 230VAC ACTUATORS - OUTPUTS
The MDT KNX RF+ Shutter Actuator receives KNX/EIB telegrams and controls 1 indipendent shutter or sunblind drive.
The output uses two monostable relays.

  • Production in Germany, certified according to ISO 9001
  • Commissioning with ETS3/4/5
  • New KNX RF+ protocol in system mode
  • Operation mode blind/shutter programmable
  • Travel-, pause-at-change-of-direction- and step time adjustable
  • 1-bit automatic function and sun protection
  • 8-bit positioning for shutter and blinds
  • 8 scenes per channel
  • Programmable behavior in case of bus voltage failure or return
  • Flush mounted in socket
  • Connection via MDT KNX RF+ Line Coupler
  • To upgrade your installation without placing KNX bus cables
  • Power supply 230VAC
  • Dimensions (W x H x D): 41mm x 41mm x 22mm
  • Integrated bus coupling unit
  • 3 years warranty
13324
RF-JAL1UP.01 KNX RF + SHUTTER ACTUATOR 1-FOLD, FLUSH MOUNTED, 6A, 230VAC ACTUATORS - OUTPUTS
13325 RF-GTT4W.01 KNX RF + Glass Push Button 4-fold Plus with actuator, Integrated temperature sensor PUSH BUTTONS
The MDT KNX RF+ Glas Push Button releases KNX telegrams after touching the sensor areas on top, 1 or 2 button operation can be parameterized.

  • Production in Germany, certified according to ISO 9001
  • Commissioning with ETS3/4/5
  • New KNX RF+ protocol in system mode
  • Sensor areas can be parameterized for 1 or 2 button operation
  • NO or NC contact operation, programmable length of button push
  • Forced setting function for each output
  • Operation with short/long button push and 2 objects
  • Operation of blinds and shutters, 1 and 2 button operation
  • Can be set as switching actuator or shutter actuator
  • 4 integrated logical functions, cleaning function
  • Additional switching channel (e.g. panic function)
  • Connection via KNX RF+ Line Coupler
  • Compatible to the new KNX RF+ specification
  • Surrounding orientation light with day/night object
  • Title block to insert behind glas front, labeling fim included
  • To replace conventionel push buttons
  • To upgrade your installation without placing KNX bus cables
  • Power supply 230VAC
  • Installation with support ring (included in delivery)
  • Integrated bus coupling unit
  • 3 years warranty
13325
RF-GTT4W.01 KNX RF + GLASS PUSH BUTTON 4-FOLD PLUS WITH ACTUATOR, INTEGRATED TEMPERATURE SENSOR PUSH BUTTONS
13327 RF-GTT8W.01 KNX RF + Glass Push Button 4-fold Plus with actuator, Integrated temperature sensor PUSH BUTTONS
The MDT KNX RF+ Glas Push Button releases KNX telegrams after touching the sensor areas on top, 1 or 2 button operation can be parameterized.

  • Production in Germany, certified according to ISO 9001
  • Commissioning with ETS3/4/5
  • New KNX RF+ protocol in system mode
  • Sensor areas can be parameterized for 1 or 2 button operation
  • NO or NC contact operation, programmable length of button push
  • Forced setting function for each output
  • Operation with short/long button push and 2 objects
  • Operation of blinds and shutters, 1 and 2 button operation
  • Can be set as switching actuator or shutter actuator
  • 4 integrated logical functions, cleaning function
  • Additional switching channel (e.g. panic function)
  • Connection via KNX RF+ Line Coupler
  • Compatible to the new KNX RF+ specification
  • Surrounding orientation light with day/night object
  • Title block to insert behind glas front, labeling fim included
  • To replace conventionel push buttons
  • To upgrade your installation without placing KNX bus cables
  • Power supply 230VAC
  • Installation with support ring (included in delivery)
  • Integrated bus coupling unit
  • 3 years warranty
13327
RF-GTT8W.01 KNX RF + GLASS PUSH BUTTON 4-FOLD PLUS WITH ACTUATOR, INTEGRATED TEMPERATURE SENSOR PUSH BUTTONS
15906 SCN-RT2UP.01 Temperature Controller/Sensor 2-fold, flush mounted SENSORS

The MDT Temperature Controller is used for all purpose temperature control applications. The temperature is received as an KNX object, additionally the SCN-RT6AP.01 can manage up to 6 PT 1000 temperature sensors.

Production in Germany, certiied according to ISO 9001 Selectable temperature controller (PI, Two-position, PWM) Limit values min/max
Frost-/heat protection alarm Min/max memory Cyclical sending of contact state programmable Day-/night-/frost-/heat protection operation, cooling function
Status feedback by HVAC and RHCC status objects Operation mode can be set via Bit/Byte objects Desired value can be given by visualisation, e.g.MDT VisuControl Integrated bus coupling unit 3 years warranty

Temperature measurement by separate PT1000 sensors.

Ideal to measure the outside temperature (e.g. with SCN-PTST3.01)

15906
SCN-RT2UP.01 TEMPERATURE CONTROLLER/SENSOR 2-FOLD, FLUSH MOUNTED SENSORS
17104 SCN-IP000.02 IP Interface, 4 simultaneous connections possible, 2SU GATEWAYS

KNX USB Interface: The USB Interface enables the communication between the PC and the KNX/EIB system. The USB interface is galvanically isolated from the KNX/EIB bus

KNX IP Interface: The IP Interface enables the communication between the PC and the KNX/EIB system via LAN.
The KNX IP Interface allows to programm the KNX bus via TCP/IP, 4 simultaneous connections possible.

KNX IP Router: This Interface offers the same functions as the IP interface, but the device routes telegrams as a line coupler using the the LAN.

KNX IP Line coupler: This Interface connects two KNX lines to each other. Electrical isolation between the lines and reduction of the busload by using the filter function.

• USB Interface:
• To enable bidirectional communication between PC and the KNX bus via USB
• Fully compatible to ETS3/4/5
• Long frame support for ETS5

• IP Interface/Router:
• To enable bidirectional communication between PC and the KNX bus TCP/IP
• 4 simultaneous connections possible
• Long frame support for ETS5
• Programming the KNX bus via TCP/IP
• Power supply by KNX bus, no external bus power supply required
• Encrypted transmission at sending emails
• Time server functions to send time and date on the KNX bus
• Production in Germany, certified according to ISO 9001
• Modular installation device for DIN 35mm rails
• Integrated bus coupling unit
• 3 years warranty

17104
SCN-IP000.02 IP INTERFACE, 4 SIMULTANEOUS CONNECTIONS POSSIBLE, 2SU GATEWAYS
17147 AKI-0416.03 AKI- Switch Actuator 4-fold, 4SU MDRC, 16/20A, 230VAC, C-load 200µF ACTUATORS - OUTPUTS
Switch Actuator with bistable relays, for heavy C-loads
Current max. 16/20A, capacitive load max. 200µF
• Extensive function extension
• Lockable manual operation and LED indicator for each channel
• NO and NC contact operation
• Status response at manually operation
• Time functions (switch-on/switch-off delay)
• Extensive staircase light and impulse functions
• Extended logical and scene functions for each channel
• Extended status functions (inverted, cyclic, at block)
• Treshold switch (Byte/2Byte/2Byte float)
• Hour meter for switching
• Priority/forced operation with automatic release time
• Separate power supply terminals for each channel
• Power supply via KNX bus
• Integrated bus coupling unit
• 3 years warranty
17147
AKI-0416.03 AKI- SWITCH ACTUATOR 4-FOLD, 4SU MDRC, 16/20A, 230VAC, C-LOAD 200ΜF ACTUATORS - OUTPUTS
17148 AKI-0816.03 AKI- Switch Actuator 8-fold, 8SU MDRC, 16/20A, 230VAC, C-load 200µF ACTUATORS - OUTPUTS
Switch Actuator with bistable relays, for heavy C-loads
Current max. 16/20A, capacitive load max. 200µF
• Extensive function extension
• Lockable manual operation and LED indicator for each channel
• NO and NC contact operation
• Status response at manually operation
• Time functions (switch-on/switch-off delay)
• Extensive staircase light and impulse functions
• Extended logical and scene functions for each channel
• Extended status functions (inverted, cyclic, at block)
• Treshold switch (Byte/2Byte/2Byte float)
• Hour meter for switching
• Priority/forced operation with automatic release time
• Separate power supply terminals for each channel
• Power supply via KNX bus
• Integrated bus coupling unit
• 3 years warranty
17148
AKI-0816.03 AKI- SWITCH ACTUATOR 8-FOLD, 8SU MDRC, 16/20A, 230VAC, C-LOAD 200ΜF ACTUATORS - OUTPUTS
17149 AKI-1216.03 AKI- Switch Actuator 12-fold, 12 SU MDRC, 16/20A, 230VAC, C-load 200µF ACTUATORS - OUTPUTS
Switch Actuator with bistable relays, for heavy C-loads
Current max. 16/20A, capacitive load max. 200µF
• Extensive function extension
• Lockable manual operation and LED indicator for each channel
• NO and NC contact operation
• Status response at manually operation
• Time functions (switch-on/switch-off delay)
• Extensive staircase light and impulse functions
• Extended logical and scene functions for each channel
• Extended status functions (inverted, cyclic, at block)
• Treshold switch (Byte/2Byte/2Byte float)
• Hour meter for switching
• Priority/forced operation with automatic release time
• Separate power supply terminals for each channel
• Power supply via KNX bus
• Integrated bus coupling unit
• 3 years warranty
17149
AKI-1216.03 AKI- SWITCH ACTUATOR 12-FOLD, 12 SU MDRC, 16/20A, 230VAC, C-LOAD 200ΜF ACTUATORS - OUTPUTS
17150 AMI-0416.02 AMI- Switch Actuator 4-fold, 4SU MDRC, 16/20A, 230VAC, C-load, 200µF, with current measurement ACTUATORS - OUTPUTS
Current measurement, Switch Actuator with bistable relays
Current max. 16/20A, capacitive load max. 200µF
• Push Button and LED indicator for each channel
• NO and NC contact operation
• Time functions (switch-on/switch-off delay, Staircase light function)
• Status response (active/passive) for each channel
• Logical linking of binary data, 8 scenes per channel
• Hour meter
• Central switching functions and block functions
• Adjustable behaviour in case of bus voltage failure or return
• Each contact has an own supply phase
• Integrated True RMS current measurement (current, kW)
• Current measurement range 10mA-20A
• Fast reaction <1s at Master/Slave operation
• Integrated counter to capture power consumption (Wh/kWh)
• Integrated bus coupling unit
• 3 years warranty
17150
AMI-0416.02 AMI- SWITCH ACTUATOR 4-FOLD, 4SU MDRC, 16/20A, 230VAC, C-LOAD, 200ΜF, WITH CURRENT MEASUREMENT ACTUATORS - OUTPUTS
17151 AMI-0816.02 AMI- Switch Actuator 8-fold, 8SU MDRC, 16/20A, 230VAC, C-load, 200µF, with current measurement ACTUATORS - OUTPUTS
Current measurement, Switch Actuator with bistable relays
Current max. 16/20A, capacitive load max. 200µF
• Push Button and LED indicator for each channel
• NO and NC contact operation
• Time functions (switch-on/switch-off delay, Staircase light function)
• Status response (active/passive) for each channel
• Logical linking of binary data, 8 scenes per channel
• Hour meter
• Central switching functions and block functions
• Adjustable behaviour in case of bus voltage failure or return
• Each contact has an own supply phase
• Integrated True RMS current measurement (current, kW)
• Current measurement range 10mA-20A
• Fast reaction <1s at Master/Slave operation
• Integrated counter to capture power consumption (Wh/kWh)
• Integrated bus coupling unit
• 3 years warranty
17151
AMI-0816.02 AMI- SWITCH ACTUATOR 8-FOLD, 8SU MDRC, 16/20A, 230VAC, C-LOAD, 200ΜF, WITH CURRENT MEASUREMENT ACTUATORS - OUTPUTS
17152 AMI-1216.02 AMI- Switch Actuator 12-fold, 12SU MDRC, 16/20A, 230VAC, C-load, 200µF, with current measurement ACTUATORS - OUTPUTS
Current measurement, Switch Actuator with bistable relays
Current max. 16/20A, capacitive load max. 200µF
• Push Button and LED indicator for each channel
• NO and NC contact operation
• Time functions (switch-on/switch-off delay, Staircase light function)
• Status response (active/passive) for each channel
• Logical linking of binary data, 8 scenes per channel
• Hour meter
• Central switching functions and block functions
• Adjustable behaviour in case of bus voltage failure or return
• Each contact has an own supply phase
• Integrated True RMS current measurement (current, kW)
• Current measurement range 10mA-20A
• Fast reaction <1s at Master/Slave operation
• Integrated counter to capture power consumption (Wh/kWh)
• Integrated bus coupling unit
• 3 years warranty
17152
AMI-1216.02 AMI- SWITCH ACTUATOR 12-FOLD, 12SU MDRC, 16/20A, 230VAC, C-LOAD, 200ΜF, WITH CURRENT MEASUREMENT ACTUATORS - OUTPUTS
17153 AKS-0416.03 AKS- Switch Actuator 4-fold, 4SU MDRC, 16A, 230VAC, C-load 140µF ACTUATORS - OUTPUTS

 Switch Actuator with bistable relays
Current max. 16A, capacitive load max. 140µF
• Space saving by ideal form factor
• Extensive function extension
• Lockable manual operation and LED indicator for each channel
• NO and NC contact operation
• Status response at manually operation
• Time functions (switch-on/switch-off delay, staircase light functions)
• Extended logical and scene functions for each channel
• Extended status functions (inverted, cyclic, at block)
• Treshold switch (Byte/2Byte/2Byte float)
• Hour meter for switching
• Priority/forced operation with automatic release time
• Separate power supply terminals for each channel
• Power supply via KNX bus
• Integrated bus coupling unit
• 3 years warranty

17153
AKS-0416.03 AKS- SWITCH ACTUATOR 4-FOLD, 4SU MDRC, 16A, 230VAC, C-LOAD 140ΜF ACTUATORS - OUTPUTS
17154 AKS-0816.03 AKS- Switch Actuator 8-fold, 6SU MDRC, 16A, 230VAC, C-load 140µF ACTUATORS - OUTPUTS

 Switch Actuator with bistable relays
Current max. 16A, capacitive load max. 140µF
• Space saving by ideal form factor
• Extensive function extension
• Lockable manual operation and LED indicator for each channel
• NO and NC contact operation
• Status response at manually operation
• Time functions (switch-on/switch-off delay, staircase light functions)
• Extended logical and scene functions for each channel
• Extended status functions (inverted, cyclic, at block)
• Treshold switch (Byte/2Byte/2Byte float)
• Hour meter for switching
• Priority/forced operation with automatic release time
• Separate power supply terminals for each channel
• Power supply via KNX bus
• Integrated bus coupling unit
• 3 years warranty

17154
AKS-0816.03 AKS- SWITCH ACTUATOR 8-FOLD, 6SU MDRC, 16A, 230VAC, C-LOAD 140ΜF ACTUATORS - OUTPUTS
17155 AKS-1216.03 AKS- Switch Actuator 12-fold, 8SU MDRC, 16A, 230VAC, C-load 140µF ACTUATORS - OUTPUTS

 Switch Actuator with bistable relays
Current max. 16A, capacitive load max. 140µF
• Space saving by ideal form factor
• Extensive function extension
• Lockable manual operation and LED indicator for each channel
• NO and NC contact operation
• Status response at manually operation
• Time functions (switch-on/switch-off delay, staircase light functions)
• Extended logical and scene functions for each channel
• Extended status functions (inverted, cyclic, at block)
• Treshold switch (Byte/2Byte/2Byte float)
• Hour meter for switching
• Priority/forced operation with automatic release time
• Separate power supply terminals for each channel
• Power supply via KNX bus
• Integrated bus coupling unit
• 3 years warranty

17155
AKS-1216.03 AKS- SWITCH ACTUATOR 12-FOLD, 8SU MDRC, 16A, 230VAC, C-LOAD 140ΜF ACTUATORS - OUTPUTS
17156 AKS-2016.03 AKS- Switch Actuator 20-fold, 12SU MDRC, 16A, 230VAC, C-load 140µF ACTUATORS - OUTPUTS

 Switch Actuator with bistable relays
Current max. 16A, capacitive load max. 140µF
• Space saving by ideal form factor
• Extensive function extension
• Lockable manual operation and LED indicator for each channel
• NO and NC contact operation
• Status response at manually operation
• Time functions (switch-on/switch-off delay, staircase light functions)
• Extended logical and scene functions for each channel
• Extended status functions (inverted, cyclic, at block)
• Treshold switch (Byte/2Byte/2Byte float)
• Hour meter for switching
• Priority/forced operation with automatic release time
• Separate power supply terminals for each channel
• Power supply via KNX bus
• Integrated bus coupling unit
• 3 years warranty

17156
AKS-2016.03 AKS- SWITCH ACTUATOR 20-FOLD, 12SU MDRC, 16A, 230VAC, C-LOAD 140ΜF ACTUATORS - OUTPUTS
17157 AMS-0416.02 AMS- Switch Actuator 4-fold, 4SU MDRC, 16A, 230VAC, C-load, 140µF, with current measurement ACTUATORS - OUTPUTS
Switch Actuator 4-fold, 4SU MDRC, 16A, 230VAC, C-load
With current measurement, Switch Actuator with bistable relays
Current max. 16A, capacitive load max. 140µF
• Push Button and LED indicator for each channel
• NO and NC contact operation
• Time functions (switch-on/switch-off delay, staircase light function)
• Status response (active/passive) for each channel
• Logical linking of binary data, 8 scenes per channel
• Hour meter
• Central switching functions and block functions
• Adjustable behaviour in case of bus voltage failure or return
• Each contact has an own supply phase
• Integrated True RMS current measurement (current, kWh)
• Current measurement range 10mA-20A
• Fast reaction <1s at Master/Slave operation
• Integrated counter to capture power consumption (Wh/kWh)
• Integrated bus coupling unit
• 3 years warranty
17157
AMS-0416.02 AMS- SWITCH ACTUATOR 4-FOLD, 4SU MDRC, 16A, 230VAC, C-LOAD, 140ΜF, WITH CURRENT MEASUREMENT ACTUATORS - OUTPUTS
17158 AMS-0816.02 AMS- Switch Actuator 8-fold, 8SU MDRC, 16A, 230VAC, C-load, 140µF, with current measurement ACTUATORS - OUTPUTS
Switch Actuator 4-fold, 4SU MDRC, 16A, 230VAC, C-load
With current measurement, Switch Actuator with bistable relays
Current max. 16A, capacitive load max. 140µF
• Push Button and LED indicator for each channel
• NO and NC contact operation
• Time functions (switch-on/switch-off delay, staircase light function)
• Status response (active/passive) for each channel
• Logical linking of binary data, 8 scenes per channel
• Hour meter
• Central switching functions and block functions
• Adjustable behaviour in case of bus voltage failure or return
• Each contact has an own supply phase
• Integrated True RMS current measurement (current, kWh)
• Current measurement range 10mA-20A
• Fast reaction <1s at Master/Slave operation
• Integrated counter to capture power consumption (Wh/kWh)
• Integrated bus coupling unit
• 3 years warranty
17158
AMS-0816.02 AMS- SWITCH ACTUATOR 8-FOLD, 8SU MDRC, 16A, 230VAC, C-LOAD, 140ΜF, WITH CURRENT MEASUREMENT ACTUATORS - OUTPUTS
17159 AMS-1216.02 AMS- Switch Actuator 12-fold, 12SU MDRC, 16A, 230VAC, C-load, 140µF, with current measurement ACTUATORS - OUTPUTS
  • Production in Germany, certified according to ISO 9001
  • Push Button and LED indicator for each channel
  • NO and NC contact operation
  • Time functions (switch-on/switch-off delay, Staircase light function)
  • Status response (active/passive) for each channel
  • Logical linking of binary data, 8 scenes per channel
  • Hour meter
  • Central switching functions and block functions
  • Adjustable behaviour in case of bus voltage failure or return
  • Each contact has an own supply phase
  • Integrated True RMS current measurement (current, kW)
  • Current measurement range 10mA-20A
  • Fast reaction less than 1s at Master/Slave operation
  • Integrated counter to capture power consumption (Wh/kWh)
  • Integrated bus coupling unit
  • 3 years warranty
17159
AMS-1216.02 AMS- SWITCH ACTUATOR 12-FOLD, 12SU MDRC, 16A, 230VAC, C-LOAD, 140ΜF, WITH CURRENT MEASUREMENT ACTUATORS - OUTPUTS
17496 BE-GT2TW.01 Glass Push Button II Smart, 4/6/8/12-fold, Colored display and RGB status indicator, Temp. sensor PUSH BUTTONS

With 6 sensor areas, colored display and RGB status indicator Suitable as 4/6/8/12-fold push button. Integrated BCU

•  The buttons can be adjusted for 1 or 2 button operation
•  4 buttons can be reserved with 2 or 3 function levels (8/12-fold)
•  2 buttons to enter the function levels directly
•  Large, colored active display to indicate function and status
•  Symbols and plain text adjustable for each button/function
•  With temperature sensor to measure room temperature
•  Additional functions to set temperature and operating mode
•  Indication of user defined messages (1Bit)
•  Indication of user defined text telegrams (14Byte)
•  Application as RTC in combination with AKH heating actuator
•  1 or 2 button operation for switching, dimming, shutters, values
•  Short/long button push with 2 objects
•  RGB status for each button separate controlable from each level
•  Indication of inside/outside temperature and time
•  Automatic display brightness via light sensor and day/night object
•  Slap function with additional switch channel
•  Installation in socket, Dimensions (W x H): 92mm x 92mm
•  No additional power supply required
•  Integrated bus coupling unit, 3 years warranty

17496
BE-GT2TW.01 GLASS PUSH BUTTON II SMART, 4/6/8/12-FOLD, COLORED DISPLAY AND RGB STATUS INDICATOR, TEMP. SENSOR PUSH BUTTONS
18625 SCN-P360D3.02 Presence Detector, 3 pyro sensors, (Movement 11m, Presence 5m) DETECTORS
The MDT Presence Detector is available in 2 versions, Presence Detector with light sensor and Presence Detector with light sensor plus constant level light intensity. Both Presence Detectors capturing the smallest movements with their built in pyrodetectors and high resolution lens.

  • Production in Germany, certified according to ISO 9001
  • Presence detector with light sensor
  • 1-4 pyro detectors with high resolution lens
  • Programmable sensibility (Not SCN-P360D.01)
  • Switching function depending on brightness and movement
  • Brighness value can be read out
  • Master/slave function programmable
  • Scene functions
  • Day/Night function, monitoring with messages
  • 2 zone operation (SCN-P360x4.01 only)
  • HVAC control channel (adjustable over a certain period)
  • Orientation light (Brightness and time adjustable)
  • Lowerable sensitivity during night and for standby
  • Integrated bus coupling unit
  • 3 years warranty
18625
SCN-P360D3.02 PRESENCE DETECTOR, 3 PYRO SENSORS, (MOVEMENT 11M, PRESENCE 5M) DETECTORS
18626 SCN-P360D4.02 Presence Detector, 4 pyro sensors, Light sensor (Movement 16m, Presence 8m) DETECTORS
The MDT Presence Detector is available in 2 versions, Presence Detector with light sensor and Presence Detector with light sensor plus constant level light intensity. Both Presence Detectors capturing the smallest movements with their built in pyrodetectors and high resolution lens.

  • Production in Germany, certified according to ISO 9001
  • Presence detector with light sensor
  • 1-4 pyro detectors with high resolution lens
  • Programmable sensibility (Not SCN-P360D.01)
  • Switching function depending on brightness and movement
  • Brighness value can be read out
  • Master/slave function programmable
  • Scene functions
  • Day/Night function, monitoring with messages
  • 2 zone operation (SCN-P360x4.01 only)
  • HVAC control channel (adjustable over a certain period)
  • Orientation light (Brightness and time adjustable)
  • Lowerable sensitivity during night and for standby
  • Integrated bus coupling unit
  • 3 years warranty
18626
SCN-P360D4.02 PRESENCE DETECTOR, 4 PYRO SENSORS, LIGHT SENSOR (MOVEMENT 16M, PRESENCE 8M) DETECTORS
12571 VC-0701.03 Touch Panel VisuControl 7"/17.7cm VISUALIZATION
Touch Panel to visualize current building status and to control building functions. The operation is interactively by touching the TFT Display. The panel provides EIB/KNX, USB and LAN connectors. With the integrated webserver you can establish a remote connection to control from anywhere. Functions are switching, dimming, shutter/blind control, logic functions, scene control, visualizing trends and send emails. Integrated bus coupling unit. Busconnector red/black included. VisuControl lite software included, without cover frame.
12571
VC-0701.03 TOUCH PANEL VISUCONTROL 7"/17.7CM VISUALIZATION
12604 SCN-P360D1.01 Presence Detector, 1 pyro sensor, Presence max. 3-4m DETECTORS

Description

The MDT Presence Detector is available in 2 versions, Presence Detector with light sensor and Presence Detector with light sensor plus constant level light intensity. Both Presence Detectors capturing the smallest movements with their built in pyrodetectors and high resolution lens.

  • Production in Germany, certified according to ISO 9001
  • Presence detector with light sensor
  • 1-4 pyro detectors with high resolution lens
  • Programmable sensibility (Not SCN-P360D.01)
  • Switching function depending on brightness and movement
  • Brighness value can be read out
  • Master/slave function programmable
  • Scene functions
  • Day/Night function, monitoring with messages
  • 2 zone operation (SCN-P360x4.01 only)
  • HVAC control channel (adjustable over a certain period)
  • Orientation light (Brightness and time adjustable)
  • Lowerable sensitivity during night and for standby
  • Integrated bus coupling unit
  • 3 years warranty
12604
SCN-P360D1.01 PRESENCE DETECTOR, 1 PYRO SENSOR, PRESENCE MAX. 3-4M DETECTORS
13331 VCG-UP10.03 Visucontrol, ACC, 10" Flush mounted metal box. 10" VISUALIZATION
Visucontrol, ACC, 10" Flush mounted metal box. 10"
13331
VCG-UP10.03 VISUCONTROL, ACC, 10" FLUSH MOUNTED METAL BOX. 10" VISUALIZATION
13332 VC-1001.03 Visucontrol, TouchPanel, Size 10"/ 26.4 cm VISUALIZATION
The MDT VisuControl Touch Panel is used for the visualisation of the current building status and to control building functions.

  • Production certified according to ISO 9001
  • Individually programmable
  • Switching and dimming, shutter/blind control
  • Remote Access via iPad/iPhone/Android/PC
  • Alarm indication
  • Logical linking of binary data
  • Displaying trends
  • Forwarding of informations via email
  • VisuControl lite software and demo projects included
  • Integrated bus coupling unit
  • 3 years warranty
13332
VC-1001.03 VISUCONTROL, TOUCHPANEL, SIZE 10"/ 26.4 CM VISUALIZATION
13417 SCN-GLED1W.01 Glass LED Indicator 12-fold, Glass White VISUALIZATION

Description

The MDT LED Indicator allows to display universal logical and building functions.

  • Production in Germany, certified according to ISO 9001
  • 12 independently switchable RGB LED
  • 3 objects for each LED
  • 5 states for each LED possible (value=0, value=1,
    2 priority objects, failure of an object)
  • 8 logical blocks with 8 inputs each (8 objects)
  • 4 modules to compare telegrams
  • Brightness in 2 steps adjustable
  • Day/night object
  • Deactivation/reduction of the brightness
  • Presence/absence object
  • Drop out monitoring for objects with report function
  • Object with report function (e.g. absence or window opened)
  • Integrated bus coupling unit
  • 3 years warranty
13417
SCN-GLED1W.01 GLASS LED INDICATOR 12-FOLD, GLASS WHITE VISUALIZATION
14801 SCN-MGSUP.01 Air quality/CO2 Sensor SENSORS
The MDT VOC gas sensor with calculation to carbon oxide equivalent.
Production in Germany, certified according to ISO 9001
Fits 55mm systems:
- BERKER S1, B1, B3, B7
- GIRA Standard 55, E2, Event, Esprit
- JUNG A500, Aplus
- MERTEN M-Smart, M-Arc, M-Plan
Integrated temperature controller (PI, Two-position, PWM)
Temperature limit values min/max, frost protection alarm
Air quality limit value
PI controller to regulate air quality
Objects to switch HVAC in four steps
Measurement range from 400-2000ppm
Installation with support ring in wind sealed socket
Power supply via KNX bus without auxiliary voltage
Integrated bus coupling unit
3 years warranty
14801
SCN-MGSUP.01 AIR QUALITY/CO2 SENSOR SENSORS
14881 SCN-LED55.01 LED Indicator 55mm, White matt finish PUSH BUTTONS

Description
The MDT LED Indicator allows to display universal logical and building functions.

    Production in Germany, certified according to ISO 9001
    12 independently switchable RGB LED
    3 objects for each LED
    5 states for each LED possible (value=0, value=1,
    2 priority objects, failure of an object)
    8 logical blocks with 8 inputs each (8 objects)
    4 modules to compare telegrams
    Brightness in 2 steps adjustable
    Day/night object
    Deactivation/reduction of the brightness
    Presence/absence object
    Drop out monitoring for objects with report function
    Object with report function (e.g. absence or window opened)
    Integrated bus coupling unit
    3 years warranty


 

14881
SCN-LED55.01 LED INDICATOR 55MM, WHITE MATT FINISH PUSH BUTTONS
16056 AZI-0316.01 Switch Actuator 3-fold, 4SU MDRC, 230VAC, 16/20A, C-Load 200µF, with active power measurement ACTUATORS - OUTPUTS

The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 6 independent electrical loads.

The MDT Switch Actuator offers current measurement for each channel and measurement of the total current. In dependence on the parameterization the measured data can be transmit in different data formats (mA/A/kW) onto the KNX bus. Additionally the device provides an hour/service interval meter. The integrated counter allows to capture the active power consumption exactly.
Production in Germany, certified according to ISO 9001
Push Button and LED indicator for each channel
NO and NC contact operation
Time functions (switch-on/switch-off delay, staircase light function)
Status response (active/passive) for each channel
Logical linking of binary data, 8 scenes per channel
Hour meter
Central switching functions and block functions
Programmable behavior in case of bus voltage failure or return
Each contact has an own supply phase
Integrated True RMS current measurement (current, kW)
Current measurement range 10mA - 20A
Active power measurement with integrated counter (Wh/kWh)
Integrated bus coupling unit
3 years warranty

16056
AZI-0316.01 SWITCH ACTUATOR 3-FOLD, 4SU MDRC, 230VAC, 16/20A, C-LOAD 200ΜF, WITH ACTIVE POWER MEASUREMENT ACTUATORS - OUTPUTS
16058 SCN-RT4UP.01 Temperature Controller/-Sensor 4-fold, flush mounted SENSORS
Description
The MDT Temperature Controller is used for all purpose temperature control applications. The temperature is received as an KNX object, additionally the SCN-RT6AP.01 can manage up to 6 PT 1000 temperature sensors.
Production in Germany, certiied according to ISO 9001
Selectable temperature controller (PI, Two-position, PWM)
Limit values min/max
Frost-/heat protection alarm
Min/max memory
Cyclical sending of contact state programmable
Day-/night-/frost-/heat protection operation, cooling function
Status feedback by HVAC and RHCC status objects
Operation mode can be set via Bit/Byte objects
Desired value can be given by visualisation, e.g.MDT VisuControl
Integrated bus coupling unit
3 years warranty
16058
SCN-RT4UP.01 TEMPERATURE CONTROLLER/-SENSOR 4-FOLD, FLUSH MOUNTED SENSORS
16738 RF-AZK1ST.01 KNX RF+ Socket 1-fold, 16A, 230VAC with active power measurement, for ETS5 RF

The MDT KNX RF+ Socket receives KNX/EIB telegrams and switches one electrical load.

• Production in Germany, certified according to ISO 9001
• New KNX RF+ protocol in system mode
• Commissioning with ETS5
• NO and NC contact operation
• Time functions (switch-on/switch-off delay, staircase light function)
• Status response (active/passive) for each channel
• Logical linking of binary data
• 8 scenes per channel
• Central switching functions and block functions
• Adjustable behavior in case of bus voltage failure or return
• Connection via MDT KNX RF+ Line Coupler
• 3 years warranty

 

 

16738
RF-AZK1ST.01 KNX RF+ SOCKET 1-FOLD, 16A, 230VAC WITH ACTIVE POWER MEASUREMENT, FOR ETS5 RF
17107 STC-0960.01 Bus Power Supply with diagnosis function, 6SU MDRC, 960mA SYSTEM DEVICES

 The MDT KNX Power Supply with integrated choke supplies the KNX Bus with a constant, stabilized 30VDC voltage. The integrated bus coupling unit with diagnosis function monitors the bus voltage, bus current, bus overload and bus voltafe failure/return. All events are stored with time stamp in the internal ring buffer.The current operating status is indicated via 8 colored LED on top of the device:

• Production in Germany, certified according to ISO 9001
• KNX power supply with integrated choke
• Mains voltage 230VAC
• Short-circuit-proof
• Overload safe
• With additionally choke free output
• Integrated bus coupling unit with diagnosis function:
- Bus voltage, bus current, bus overload
- Bus voltage failure/return
- All events are stored with time stamp in a ring buffer
- Read out of the ring buffer by 14Byte telegram
- Safety functions to detect a failed device in the KNX line

• Modular installation device for DIN 35mm rails
• Integrated bus coupling unit
• 3 years warranty

 

17107
STC-0960.01 BUS POWER SUPPLY WITH DIAGNOSIS FUNCTION, 6SU MDRC, 960MA SYSTEM DEVICES
17108 STC-1280.01 Bus Power Supply with diagnosis function, 6SU MDRC, 1280mA SYSTEM DEVICES

  The MDT KNX Power Supply with integrated choke supplies the KNX Bus with a constant, stabilized 30VDC voltage. The integrated bus coupling unit with diagnosis function monitors the bus voltage, bus current, bus overload and bus voltafe failure/return. All events are stored with time stamp in the internal ring buffer.The current operating status is indicated via 8 colored LED on top of the device:

• Production in Germany, certified according to ISO 9001
• KNX power supply with integrated choke
• Mains voltage 230VAC
• Short-circuit-proof
• Overload safe
• With additionally choke free output
• Integrated bus coupling unit with diagnosis function:
- Bus voltage, bus current, bus overload
- Bus voltage failure/return
- All events are stored with time stamp in a ring buffer
- Read out of the ring buffer by 14Byte telegram
- Safety functions to detect a failed device in the KNX line

• Modular installation device for DIN 35mm rails
• Integrated bus coupling unit
• 3 years warranty

17108
STC-1280.01 BUS POWER SUPPLY WITH DIAGNOSIS FUNCTION, 6SU MDRC, 1280MA SYSTEM DEVICES
17169 STV-0640.02 Bus power supply, 4SU MDRC, 640mA SYSTEM DEVICES
Nominal current 160mA, continuous current 240mA, peak 320mA
• KNX power supply with integrated choke
• Mains voltage 230VAC
• Short-circuit-proof
• Overload safe
• LED indicator for bus reset, normal operation and bus overload
• Button for bus reset on top
• Integrated bus coupling unit
• 3 years warranty
17169
STV-0640.02 BUS POWER SUPPLY, 4SU MDRC, 640MA SYSTEM DEVICES
17338 SCN-BWM55.01 Motion Detector, 2 pyro detectors and light sensor, Flush mounted, covered area 6-10m DETECTORS

The MDT Motion Detector with light sensor captures the smallest movements with its built in pyro detectors and high resolution lens. After motion detection and below an adjusted brightness value a 1Bit („1“) telegram or 1Byte dimming value (0...100%) is send to the bus. The sensitivity is adjustable in 10 steps. If there is no movement a 1Bit („0“) telegram or 1Byte dimming value (0...100%) is send to the bus after an adjustable follow up time.

Production in Germany, certified according to ISO 9001
Fits 55mm systems:
- GIRA Standard 55, E2,E22, Event, Esprit - BERKER S1, B3, B7
- JUNG A500, Aplus, Acreation, AS500
- MERTEN 1M, M-Smart, M-Plan, M-Pure
Motion detector with light sensor and 2 pyro detectors
Motion detection angle 180°, covered area 6-10m
Sensibility adjustable
Switching function depending on movement and brightness
Brighness value can be read out
Master/slave function Adjustable
Scene functions
Day/night function, monitoring with messages
Block and forced setting functions
Lowerable sensitivity during night and for standby
Recommended mounting height: 1,05 - 1,10m
Dimensions (W x H x D): 92mm x 92mm x 32mm
Integrated bus coupling unit
3 years warranty

17338
SCN-BWM55.01 MOTION DETECTOR, 2 PYRO DETECTORS AND LIGHT SENSOR, FLUSH MOUNTED, COVERED AREA 6-10M DETECTORS
17980 AKK-0416.03 Switching actuator 4 channels 16 / 20A loads type C 200µF ACTUATORS - OUTPUTS
The MDT actuator receives KNX / EIB telegrams and switches up to 12 load depending on the independent development stage. Each output is powered by a bistable relay and can also be operated manually using the buttons on the actuator.

Ingelskirchen production, certified according to ISO 9001
Full Function Extension
Hand control with key and LED indicator per channel
Normally open and normally closed operation
Status message when operated manually
Time functions (on - / off - delay)
Wide-beam staircases and pulse function
Advanced logic and scene functions per channel
State advanced functions (inverted, cyclically, lock)
Threshold value switch (bytes / 2 byte float / 2 bytes)
Operating hours counter for switching
Priority control / priority with automatic reset time
Disconnect all L connections
KNX bus power supply
Quick app download (long frame support for ETS5
17980
AKK-0416.03 SWITCHING ACTUATOR 4 CHANNELS 16 / 20A LOADS TYPE C 200ΜF ACTUATORS - OUTPUTS
17982 AKK-0816.03 Switch Actuator 8-fold 4SU MDRC, 230VAC, 16A ACTUATORS - OUTPUTS
The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 16 independent electrical loads .
Each output uses a bistable relay and can be operated manually via a push button. The outputs are parameterized
individually via ETS. The device provides extensive functions like logical operation, status response, block functions,
central function, delay functions and staircase lighting function. Additionally the device provides several time and scene
control.
If the mains voltage fails, all outputs were switched off. After mains voltage recovery the relay position will be restored.
After bus voltage failure or recovery the relay position is selected in dependence on the parameterization. The MRDC
Switch Actuators use a common power supply terminal for four channels. This feature simplifies the wiring and increases
clarity of the circuit.
The MDT Switch Actuator AKK is a modular installation device for fixed installations in dry rooms. It fits on DIN 35mm
rails in power distribution boards or closed compact boxes.
For project design and commissioning of the MDT Switch Actuator AKK it is recommended to use the ETS or later. Please
download the application software at www.mdt.de/downloads.html
• Production in Germany, certified according to ISO 9001
Function extension:
• Lockable manual operation and LED indicator for each channel
• NO and NC contact operation
• Status response after manually operation
• Time functions (switch-on/switch-off delay)
• Extensive staircase light and impulse function
• Status response (active/passive) for each channel
• Extendend scene functions for each channel
• 8 scenes per channel
• Central switching functions and block functions
• Adjustable behavior in case of bus voltage failure or return
• Four contacts share one supply phase (AKK-02/0416.03)
• Each contact has an own supply phase (AKK-08/1616.03)
• Power supply via KNX bus
• Quick application download (long frame support for ETS5)
• Integrated bus coupling unit
• 3 years warranty
17982
AKK-0816.03 SWITCH ACTUATOR 8-FOLD 4SU MDRC, 230VAC, 16A ACTUATORS - OUTPUTS
17983 AKK-1616.03 Switch Actuator 16-fold, 8SU MDRC, 16A, 70µ, 10ECG, 230VAC, compact ACTUATORS - OUTPUTS
The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 16 independent electrical loads .
Each output uses a bistable relay and can be operated manually via a push button. The outputs are parameterized
individually via ETS. The device provides extensive functions like logical operation, status response, block functions,
central function, delay functions and staircase lighting function. Additionally the device provides several time and scene
control.
If the mains voltage fails, all outputs were switched off. After mains voltage recovery the relay position will be restored.
After bus voltage failure or recovery the relay position is selected in dependence on the parameterization. The MRDC
Switch Actuators use a common power supply terminal for four channels. This feature simplifies the wiring and increases
clarity of the circuit.
The MDT Switch Actuator AKK is a modular installation device for fixed installations in dry rooms. It fits on DIN 35mm
rails in power distribution boards or closed compact boxes.
For project design and commissioning of the MDT Switch Actuator AKK it is recommended to use the ETS or later. Please
download the application software at www.mdt.de/downloads.html
Push Button and LED indivator for each channel
NO and NC contact operation
Status response at manually operation
Time functions (switch-on/switch-off delay
Extensive staircase light and impulse functions
Status response (active/passive) for each channel
Logical linking of binary data
Extendend scene functions for each channel
Central switching functions and block functions
Adjustable behavior in case of bus voltage failure or return
Power supply via KNX bus
Quick application download (long frame support for ETS5)
3 years warranty
17983
AKK-1616.03 SWITCH ACTUATOR 16-FOLD, 8SU MDRC, 16A, 70Μ, 10ECG, 230VAC, COMPACT ACTUATORS - OUTPUTS
17984 AKK-04FC.03 Switch Actuator 4-fold / Fancoil 2SU MDRC, 230VAC, 16A ACTUATORS - OUTPUTS
The MDT Switch Actuator AKK receives KNX telegrams and switches up to 4 independent electrical loads in operation
mode as switching actuator. Each output uses a bistable relay and is individually agjustable via ETS. In aoperation mode
as fan coil actuator 3 or 4 step ventilators are controlled. In 3 speed operation the fourth channel can be used as output
for valve control.
Fan coil mode:
• Control of 3/4-speed fans/ventilator convectors
• Additional switching output at 3-speed operation
• Outputs are locked against each other
• Direct operation by three 1Bit objects or a single 1Bit object (+/-)
• Automatic operation by 1Byte control value (0-100%)
• Suitable for 2-pipe/4-pipe systems
• Output objects to control valves for heating/cooling
• Day/Night function to limit fan speed at night
• Emergency operation if actuating variable fails
Switch Actuator mode:
• NO and NC contact operation
• Time functions (switch-on/switch-off delay)
• Staircase light function with adjustable warning time
• Status response (active/passive) for each channel
• Logical linking of binary data, 8 scenes per channel
• Central switching functions and block functions
• Adjustable behaviour in case of bus voltage failure or return
The MDT Switch Actuator AKK Fancoil is a modular installation device for fixed installations in dry rooms. It fits on DIN
35mm rails in power distribution boards or closed compact boxes.
For project design and commissioning of the MDT Switch Actuator AKK Fancoil it is recommended to use the ETS.
Please download the application software at www.mdt.de/downloads.html
 
17984
AKK-04FC.03 SWITCH ACTUATOR 4-FOLD / FANCOIL 2SU MDRC, 230VAC, 16A ACTUATORS - OUTPUTS
17985 AKK-01UP.03 Switch Actuator 1-fold, flush mounted, 16A, 70µ, 10ECG, 230VAC, Compact ACTUATORS - OUTPUTS

The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 2 independent electrical loads . Each output uses a monostable relay. The outputs are parameterized individually via ETS. The device provides extensive functions like logical operation, status response, block functions, central function, delay functions and staircase lighting function. Additionally the device provides several time and scene control.

If the mains voltage fails, all outputs were switched off. After mains voltage recovery the relay position will be restored. After bus voltage failure or recovery the relay position is selected in dependence on the parameterization

The MDT Switch Actuator AKK is available as flush mounted installation device for fixed installation in dry rooms

For project design and commissioning of the MDT Switch Actuator AKK it is recommended to use the ETS. Please download the application software at www.mdt.de/downloads.html

 

• Production in Germany, certified according to ISO 9001

• Function extension

• NO and NC contact operation

• Time functions (switch-on/switch-off delay)

• Extensive staircase light and impulse functions

• Status response (active/passive) for each channel

• Logical linking of binary data

• Extendend scene functions for each channel

• Central switching functions and block functions

• Adjustable behavior in case of bus voltage failure or return

• Flush mounted in socket

• Dimensions (W x H x D): 41mm x 41mm x 22mm

• Quick application download (long frame support for ETS5)

• Integrated bus coupling unit

• 3 years warranty

 

17985
AKK-01UP.03 SWITCH ACTUATOR 1-FOLD, FLUSH MOUNTED, 16A, 70Μ, 10ECG, 230VAC, COMPACT ACTUATORS - OUTPUTS
17986 AKK-02UP.03 Switch Actuator 2-fold, flush mounted, 10A, 14µ, 2ECG, 230VAC, Compact ACTUATORS - OUTPUTS

The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 2 independent electrical loads . Each output uses a monostable relay. The outputs are parameterized individually via ETS. The device provides extensive functions like logical operation, status response, block functions, central function, delay functions and staircase lighting function. Additionally the device provides several time and scene control. If the mains voltage fails, all outputs were switched off. After mains voltage recovery the relay position will be restored. After bus voltage failure or recovery the relay position is selected in dependence on the parameterization. The MDT Switch Actuator AKK is available as flush mounted installation device for fixed installation in dry rooms. For project design and commissioning of the MDT Switch Actuator AKK it is recommended to use the ETS. Please download the application software at www.mdt.de/downloads.html

 • Production in Germany, certified according to ISO 9001

• Function extension

• NO and NC contact operation

• Time functions (switch-on/switch-off delay)

• Extensive staircase light and impulse functions

• Status response (active/passive) for each channel

• Logical linking of binary data

• Extendend scene functions for each channel

• Central switching functions and block functions

• Adjustable behavior in case of bus voltage failure or return

• Flush mounted in socket

• Dimensions (W x H x D): 41mm x 41mm x 22mm

• Quick application download (long frame support for ETS5)

• Integrated bus coupling unit

• 3 years warranty

17986
AKK-02UP.03 SWITCH ACTUATOR 2-FOLD, FLUSH MOUNTED, 10A, 14Μ, 2ECG, 230VAC, COMPACT ACTUATORS - OUTPUTS
17987 AKK-03UP.03 Switch Actuador 3-fold, flush mounted, 10A, 14µ, 2ECG, 230VAV, Fan coil, ACTUATORS - OUTPUTS

Switch Actuator 3-fold, flush mountedThe MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 2 independent electrical loads . Each  output uses a monostable relay. The outputs are parameterized individually via ETS. The device provides extensive
functions like logical operation, status response, block functions, central function, delay functions and staircase lighting  function. Additionally the device provides several time and scene control.
If the mains voltage fails, all outputs were switched off. After mains voltage recovery the relay position will be restored.
After bus voltage failure or recovery the relay position is selected in dependence on the parameterization.
The MDT Switch Actuator AKK is available as flush mounted installation device for fixed installation in dry rooms.
For project design and commissioning of the MDT Switch Actuator AKK it is recommended to use the ETS.
Please download the application software at www.mdt.de/downloads.html

• Production in Germany, certified according to ISO 9001
• Function extension

• NO and NC contact operation
• Time functions (switch-on/switch-off delay)
• Extensive staircase light and impulse functions
• Status response (active/passive) for each channel
• Logical linking of binary data
• Extendend scene functions for each channel
• Central switching functions and block functions
• Adjustable behavior in case of bus voltage failure or return
• Flush mounted in socket
• Dimensions (W x H x D): 41mm x 41mm x 22mm
• Quick application download (long frame support for ETS5)
• Integrated bus coupling unit
• 3 years warranty222

 
17987
AKK-03UP.03 SWITCH ACTUADOR 3-FOLD, FLUSH MOUNTED, 10A, 14Μ, 2ECG, 230VAV, FAN COIL, ACTUATORS - OUTPUTS
17988 AKS-1616.03 Switch Actuator 16-fold 8SU MDRC, 230VAC, 16A, C-Load 140µF ACTUATORS - OUTPUTS

The new AKS series offers more channels at less space, so lower costs per channel.

The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 20 independent electrical loads. Each output uses a bistable relay and can be operated manually via a push button. A green LED indicates the switching status of each output.

  • Production in Germany, certified according to ISO 9001
  • Space saving by ideal form factor
  • Extensive function extension
  • Lockable manual operation and LED indicator for each channel
  • NO and NC contact operation
  • Status response at manually operation
  • Time functions (switch-on/switch-off delay, staircase light functions)
  • Extended logical and scene functions for each channel
  • Extended status functions (inverted, cyclic, at block)
  • Treshold switch (Byte/2Byte/2Byte float)
  • Hour meter for switching
  • Priority/forced operation with automatic release time
  • Quick application download (long frame support for ETS5)
  • Power supply via KNX bus
  • Integrated bus coupling unit
  • 3 years warranty
17988
AKS-1616.03 SWITCH ACTUATOR 16-FOLD 8SU MDRC, 230VAC, 16A, C-LOAD 140ΜF ACTUATORS - OUTPUTS
17989 AKU-0816.02 Universal Actuator 8-fold 4SU MDRC, 230VAC, 16A ACTUATORS - OUTPUTS

The MDT Universal Actuator receives KNX/EIB telegrams can be used as Switch Actuator or Shutter Actuator. Mixed applications from Switch- and Shutter Actuators are possible. Each output uses a bistable relay and can be operated manually via a push button.

 

  • Production in Germany, certified according to ISO 9001
  • Extensive function extension
  • Can be used as Switch Actuator (8/16-fold) or Shutter Actuator (4/8-fold)
  • Mixed applications from Switch- and Shutter Actuator possible
  • Heating control with PWM 0-100%
  • Push Button and LED indicator for each channel
  • Time functions (switch-on/switch-off delay, staircase light function)
  • Status response (active/passive) for each channel
  • Logical linking of binary data, 8 scenes per channel
  • Central switching functions and block functions
  • Operation mode blind/shutter adjustable
  • Travel-, pause-at-change-of-direction- and step time adjustable
  • 1Bit automatic function and sun protection
  • 8Bit positioning for shutter and blinds
  • Adjustable behaviour in case of bus voltage failure or return
  • Each contact has an own supply phase
  • Quick application download (long frame support for ETS5)
  • 3 years warranty
17989
AKU-0816.02 UNIVERSAL ACTUATOR 8-FOLD 4SU MDRC, 230VAC, 16A ACTUATORS - OUTPUTS
18578 VC-EASY.02 Objectserver VisuControl Easy, with iPhone/iPad App, Power supply via KNX bus VISUALIZATION

The MDT VisuControl Easy object server is used for the visualisation of the current building status and to control
building functions via iOS app.

    Production certified according to ISO 9001
    VisuControl for KNX app available for free in app store
    Automatically customized iPhone and iPad view
    The app supports up to 4 object servers
    Integrated VPN support
    Possible to visualize up to 120 functions
    Visualization and operation of lighting, blinds, room temperature,
    status, media data, weather data
    Graphical user interface is created automatically
    Individual arrangement in rooms, zones or groups
    Email function for sending messages and status reports
    IP Interface (4 connections at the same time, bus programming)
    Time server for sending the date / time to the KNX bus
    Logical functions for group indicators
    HSV or RGB color control
    Easy configuration with ETS 4/5 without additional software
    Power supply via KNX bus
    3 years warranty

VisuControl Easy App, available in the Apple App Store

18578
VC-EASY.02 OBJECTSERVER VISUCONTROL EASY, WITH IPHONE/IPAD APP, POWER SUPPLY VIA KNX BUS VISUALIZATION
18622 SCN-G360D3.02 SCN-G360D3.02 Glass Presence Detector, 3 sens. Light sensor (Movement 11m, Presence 5m) DETECTORS
  • SCN-G360D3.02  Glass Presence Detector, 3 sens.  Light sensor (Movement 11m, Presence 5m)
  • Production in Germany, certified according to ISO 9001
  • New application *
  • White Glass front, integrated temp. sensor (SCN-G360x3.02 only)
  • 1, 3 or 4 pyro detectors with lens for presence detection
  • Adjustable presence and presence sensitivity for day, night and alarm *
  • Up to 4 light channels, sensors can be individually analyzed
  • 1 HVAC and 1 alarm / notification channel
  • Short time presence to reduce the after-running time *
  • Input for an external push button with reset time *
  • Intelligent switching function for automatic / manual operation *
  • Blocking and forced function with release time *
  • Extensive day / night function with 2nd switching object
  • Orientation light (brightness and time adjustable)
  • Avoiding of false reports for the alarm channel by reducing the sensitivity and adjustable observation window
  • 18622
    SCN-G360D3.02 SCN-G360D3.02 GLASS PRESENCE DETECTOR, 3 SENS. LIGHT SENSOR (MOVEMENT 11M, PRESENCE 5M) DETECTORS
    18624 SCN-G360K3.02 SCN-G360K3.02 Glass Presence Detector, 3 sens. Light sensor (Movement 11m, Presence 5m) DETECTORS
  • The MDT Presence Detector is available in 2 versions, Presence Detector with light sensor and Presence Detector with light sensor plus constant level light intensity. Both Presence Detectors capturing the smallest movements with their sensors and high resolution lens.

    • Production in Germany, certified according to ISO 9001
    • Presence detector with light sensor
    • 1-4 pyro detectors with high resolution lens
    • Programmable sensibility (Not SCN-P360D.01)
    • Switching function depending on brightness and movement
    • Brighness value can be read out
    • Master/slave function programmable
    • Scene functions
    • Day/Night function, monitoring with messages
    • HVAC control channel (adjustable over a certain period)
    • Block and forced settings functions
    • Orientation light (Brightness and time adjustable)
    • Lowerable sensitivity during night and for standby
    • Integrated bus coupling unit
    • 3 years warranty
  • 18624
    SCN-G360K3.02 SCN-G360K3.02 GLASS PRESENCE DETECTOR, 3 SENS. LIGHT SENSOR (MOVEMENT 11M, PRESENCE 5M) DETECTORS
    18682 AKD-0424R.02 RGBW LED DIMMER Controller 12/24V RGBW LED stripes 4 CHANNELS ACTUATORS - OUTPUTS

    The MDT LED Controller receives KNX/EIB telegrams and controls 12/24V RGB LED stripes.

        Production in Germany certified according to ISO 9001
        Extensive function extension
        Absolute and relative dimming for HSV color space and RGB
        Tunable White color temperature control
        Selectable dimming curve and PWM frequency up to 1000Hz
        Global and individual dimming speeds
        Individual and predefined sequences (e.g. TV Simulator)
        Repetition of sequences for automatic color control
        Suitable for 12/24V CV LED (Common Anode)
        3A for each color channel (flush mounted device)
        4A for each color channel (MDRC device)
        Parallel operation of 2 channels
        Selectable load distribution:
        AKD-0424R.02: 4 channels with 4A or 3 ch. with 3A/1 ch. 7A
        AKD-0324V.02: 3 channels with 3A or 2 ch. with 2,25A/1 ch. 4,5A
        AKD-0424V.02: 4 channels with 3A or 3 ch. with 2,25A/1 ch. 5,25A
        Operating modes:
        4 x White, RGB, RGBW, Tunable White (MDRC device)
        3 x White, RGB, Tunable White (flush mounted device)
        Automatic color temperature control Dim2Warm
        Dynamic daylight control HCL (Human Centric Lighting)
        Automatic time-dependent dimming
        Day/night function
        Overcurrent and overtemperature supervision
        Intelligent 16A C-Load Relay output to control external
        LED power supply
        3 years warranty

    18682
    AKD-0424R.02 RGBW LED DIMMER CONTROLLER 12/24V RGBW LED STRIPES 4 CHANNELS ACTUATORS - OUTPUTS
    18683 AKD-0224V.02 ACTUATOR DIMMER LED Controller For white 12/24V LED Stripes 16A ACTUATORS - OUTPUTS
    The MDT LED Controller receives KNX/EIB telegrams and controls 12/24V W LED stripes.
    These functions are available:
    • Absolute and relative dimming for HSV color space and RGB
    • Tunable White color temperature control
    • Selectable dimming curve and PWM frequency up to 1000Hz
    • Global and individual dimming speeds
    • Individual and predefined sequences (e.g. TV Simulator)
    • Suitable for 12/24V CV LED, 3A for each channel (Common Anode)
    • Parallel operation and selectable load distribution
    • Operating modes: 3 x White, RGB, Tunable White
    • Automatic color temperature control Dim2Warm
    • Dynamic daylight control HCL (Human Centric Lighting)
    • Automatic time-dependent dimming
    • Day/night function
    • Overcurrent and overtemperature supervision
    • Intelligent 16A C-Load Relay output to control external LED power supply
    The MDT LED Controller is an installation device for installation in dry rooms.
    For project design and commissioning of the MDT Controller it is recommended to use the ETS or later.
    Please download the application software at www.mdt.de/Downloads.html
    18683
    AKD-0224V.02 ACTUATOR DIMMER LED CONTROLLER FOR WHITE 12/24V LED STRIPES 16A ACTUATORS - OUTPUTS
    18684 AKD-0324V.02 ACTUATOR DIMMER RGB LED Controller For 12/24V RGB LED Stripes 3 CHANNEL ACTUATORS - OUTPUTS

    The MDT LED Controller receives KNX/EIB telegrams and controls 12/24V RGB LED stripes.
    These functions are available:
    • Absolute and relative dimming for HSV color space and RGB
    • Tunable White color temperature control
    • Selectable dimming curve and PWM frequency up to 1000Hz
    • Global and individual dimming speeds
    • Individual and predefined sequences (e.g. TV Simulator)
    • Suitable for 12/24V CV LED, 3A for each channel (Common Anode)
    • Parallel operation and selectable load distribution
    • Operating modes: 3 x White, RGB, Tunable White
    • Automatic color temperature control Dim2Warm
    • Dynamic daylight control HCL (Human Centric Lighting)
    • Automatic time-dependent dimming
    • Day/night function
    • Overcurrent and overtemperature supervision
    • Intelligent 16A C-Load Relay output to control external LED power supply
    The MDT LED Controller is an installation device for installation in dry rooms.
    For project design and commissioning of the MDT Controller it is recommended to use the ETS or later.
    Please download the application software at www.mdt.de/Downloads.html

    Selectable load distribution:
    AKD-0424R.02: 4 channels with 4A or 3 ch. with 3A/1 ch. 7A
    AKD-0324V.02: 3 channels with 3A or 2 ch. with 2,25A/1 ch. 4,5A
    AKD-0424V.02: 4 channels with 3A or 3 ch. with 2,25A/1 ch. 5,25A

    18684
    AKD-0324V.02 ACTUATOR DIMMER RGB LED CONTROLLER FOR 12/24V RGB LED STRIPES 3 CHANNEL ACTUATORS - OUTPUTS
    18685 AKD-0424V.02 ACTUATOR DIMMER RGBW LED Stripes Controller For 12/24V Stripes. 4 CHANNEL ACTUATORS - OUTPUTS

    AKD-0424R.02: 4 channels with 4A or 3 ch. with 3A/1 ch. 7A
    AKD-0324V.02: 3 channels with 3A or 2 ch. with 2,25A/1 ch. 4,5A
    AKD-0424V.02: 4 channels with 3A or 3 ch. with 2,25A/1 ch. 5,25A

    The MDT LED Controller receives KNX/EIB telegrams and controls 12/24V RGB LED stripes.
    These functions are available:
    • Absolute and relative dimming for HSV color space and RGB
    • Tunable White color temperature control
    • Selectable dimming curve and PWM frequency up to 1000Hz
    • Global and individual dimming speeds
    • Individual and predefined sequences (e.g. TV Simulator)
    • Suitable for 12/24V CV LED, 3A for each channel (Common Anode)
    • Parallel operation and selectable load distribution
    • Operating modes: 3 x White, RGB, Tunable White
    • Automatic color temperature control Dim2Warm
    • Dynamic daylight control HCL (Human Centric Lighting)
    • Automatic time-dependent dimming
    • Day/night function
    • Overcurrent and overtemperature supervision
    • Intelligent 16A C-Load Relay output to control external LED power supply
    The MDT LED Controller is an installation device for installation in dry rooms.
    For project design and commissioning of the MDT Controller it is recommended to use the ETS or later.
    Please download the application software at www.mdt.de/Downloads.html

     

    18685
    AKD-0424V.02 ACTUATOR DIMMER RGBW LED STRIPES CONTROLLER FOR 12/24V STRIPES. 4 CHANNEL ACTUATORS - OUTPUTS
    18726 SCN-USBR.02 MDT SCN-USBR.02 USB INTERFACE KNX 2TE REG SYSTEM DEVICES

    MDT SCN-USBR.02 USB INTERFACE KNX 2TE REG

    KNX USB Interface: The USB Interface enables the communication between the PC and the KNX/EIB system. The USB interface is galvanically isolated from the KNX/EIB bus

    18726
    SCN-USBR.02 MDT SCN-USBR.02 USB INTERFACE KNX 2TE REG SYSTEM DEVICES
    18778 SCN-SAFE.01 MDT SCN-SAFE.01 Security module 2TE REG SYSTEM DEVICES

    MDT SCN-SAFE.01 Security module 2TE REG


    · Blocks the connection setup and prevents programming

    and unloading of KNX devices within the line

    · Temporary release of the protection function by push button pressure on

    Or over 14 byte key telegrams

    · Security function for detecting a building failure in the line

    · Update function for firmware

    · 3 years product warranty

    18778
    SCN-SAFE.01 MDT SCN-SAFE.01 SECURITY MODULE 2TE REG SYSTEM DEVICES
    18793 RF-BE2230.01 KNX RF+ Universal Interface 2-canales Flush mounted, for 230VAC signals INPUTS

    KNX RF+ Universal Interface 2-canales  Flush mounted, for 230VAC signals

    The Universal Interface detects status changes at the inputes and triggers KNX telegrams depending on his parameterizations.


        Production in Germany, certified according to ISO 9001
        New KNX RF+ protocol in system mode
        Commissioning with ETS5
        To connect 230V push-buttons, switches, presence detectors
        4 integrated logical modules, e.g. interpretation of the inputs
        (e.g. window closed or sending second object)
        NO or NC contact operation, programmable length of button push
        Operation of blinds and shutters, 1 and 2 button operation
        Forced setting function for each output
        Operation with short/long button push and 2 objects
        Counting of pulses
        Cyclical sending of contact state programmable
        Flush mounted in socket
        Connection via MDT KNX RF+ Line Coupler
        To upgrade your installation without placing KNX bus cables
        Power supply 230VAC
        Dimensions (W x H x D): 41mm x 41mm x 22mm
        Integrated bus coupling unit
        3 years warranty

    18793
    RF-BE2230.01 KNX RF+ UNIVERSAL INTERFACE 2-CANALES FLUSH MOUNTED, FOR 230VAC SIGNALS INPUTS
    18809 SCN-DALI16.03 DaliControl Gateway with HSV control GATEWAYS

    The MDT DaliControl Gateway is the interface between DALI lights and the KNX installation and offers many new possibilities, such as the light control in the HSV color space.

        Production in Germany certified according to ISO 9001
        Supports different DALI ECG
        Control of up to 16 channels / light groups
        (switching, dimming, and brightness value)
        Innovative HSV color control, RGB, RGBW and XY color according to Dali DT8 standard
        Tunable White, color temperature control
        Integrated color control module for at time dependent controlling of the luminous color in up to 300 steps
        Operation modes like normal operation, continuous operation, night operation, stairwell operation and panic operation
        Manual operation for all 16 groups
        16 scenes with individual dimming times
        Energy saving function for switching off the ECGs
        (via additional KNX switch actuator)
        Fault detection of lamp faults and faulty ECGs
        Quick exchange of ECG
        Free DCA app for commissioning the DALI bus system and configuration of the scenes and time control
        3 years warranty

    18809
    SCN-DALI16.03 DALICONTROL GATEWAY WITH HSV CONTROL GATEWAYS
    9807 STV-0024.01 Power Supply, 24VDC / 750mA SYSTEM DEVICES
    Power Supply to feed VisuControl Touch Panel. Output voltage 24 VDC, maximal output current 750mA, short-circuit-proof, Modular installation device for DIN 35mm rails. Width 4 Space Units, busconnector red/black included.
    9807
    STV-0024.01 POWER SUPPLY, 24VDC / 750MA SYSTEM DEVICES
    9804 VCG-UP07.01 Flush mounted box 7" VisuControl VISUALIZATION
    Flush mounted box Plastic, for touch panel VisuControl 7"
    Estimated delivery date 2rd Qarter 2010
    9804
    VCG-UP07.01 FLUSH MOUNTED BOX 7" VISUCONTROL VISUALIZATION
    10304 SCN-PTST3.01 Temperature Sensor standard, 3 m CLIMATE CONTROL
    Pt 1000 sleeve probe with 3m cable, diameter 6mm
    Dimensions: 6mm x 50mm
    10304
    SCN-PTST3.01 TEMPERATURE SENSOR STANDARD, 3 M CLIMATE CONTROL
    10305 SCN-PTAN3.01 Temperature Sensor, strap on installation, 3m CLIMATE CONTROL
    Pt 1000 sleeve probe with 3m cable
    Dimensions: 8mm x 40mm
    10305
    SCN-PTAN3.01 TEMPERATURE SENSOR, STRAP ON INSTALLATION, 3M CLIMATE CONTROL
    10306 SCN-PTDE0.01 Temperature Sensor, ceiling installation CLIMATE CONTROL
    PT1000 probe for ceiling installation
    Cut out diameter: 23mm, Depth: 28mm
    10306
    SCN-PTDE0.01 TEMPERATURE SENSOR, CEILING INSTALLATION CLIMATE CONTROL
    11929 VCB-07WS.02 Glass cover frame 7", white VISUALIZATION

    Glass cover frame 7", white

    11929
    VCB-07WS.02 GLASS COVER FRAME 7", WHITE VISUALIZATION
    10394 VCZ-AD07.01 Network connection set - angulated RJ45 plug SYSTEM DEVICES
    10394
    VCZ-AD07.01 NETWORK CONNECTION SET - ANGULATED RJ45 PLUG SYSTEM DEVICES
    11499 BE-GTR1W.01 GLAS COVER FRAME FOR 55 MM RANGE 1-FOLD, WHITE PUSH BUTTONS

    DIMENSIONS 92mm x 92mm

    Fits products from 55mm range:

    • MDT Push Buttons and Push Buttons Plus,
    • BERKER S1,B1,B3,B7
    • JUNG A500, Aplus
    • GIRA Standard 55, E2, Event, Esprint
    • MERTEN M-Smart, M-Arc, M-Plan
    11499
    BE-GTR1W.01 GLAS COVER FRAME FOR 55 MM RANGE 1-FOLD, WHITE PUSH BUTTONS
    11503 BE-GTR2W.01 GLAS COVER FROM FOR 55M RANGE 2-FOLD, WHITE PUSH BUTTONS

    DIMENSIONS 92mm x 163mm

    Fits products from 55mm range:

    • MDT Push Buttons and Push Buttons Plus,
    • BERKER S1,B1,B3,B7
    • JUNG A500, Aplus
    • GIRA Standard 55, E2, Event, Esprint
    • MERTEN M-Smart, M-Arc, M-Plan
    11503
    BE-GTR2W.01 GLAS COVER FROM FOR 55M RANGE 2-FOLD, WHITE PUSH BUTTONS
    12784 SCN-P360R3.01 Presence detector mounting frame slimline for "x3.01" Series, white matt finish OTHER ACCESSORIES
    Presence detector mounting frame slimline for "x3.01" Series, white matt finish
    12784
    SCN-P360R3.01 PRESENCE DETECTOR MOUNTING FRAME SLIMLINE FOR "X3.01" SERIES, WHITE MATT FINISH OTHER ACCESSORIES
    12785 SCN-P360R4.01 Presence detector mounting frame slimline for "x4.01" series, white matt finish OTHER ACCESSORIES
    Presence detector mounting frame slimline for "x4.01" series, white matt finish
    12785
    SCN-P360R4.01 PRESENCE DETECTOR MOUNTING FRAME SLIMLINE FOR "X4.01" SERIES, WHITE MATT FINISH OTHER ACCESSORIES
    12985 VCS-PRO.03 Software Visucontrol Pro V3 VISUALIZATION
    To programm individual solutions
    12985
    VCS-PRO.03 SOFTWARE VISUCONTROL PRO V3 VISUALIZATION
    13333 VCZ-AD10.01 Visucontrol, ACC, 10" Network connection set VISUALIZATION
    Visucontrol, ACC, 10" Network connection set
    13333
    VCZ-AD10.01 VISUCONTROL, ACC, 10" NETWORK CONNECTION SET VISUALIZATION
    13334 VCB-10SI.03 Visucontrol, ACC, 10" Cover frame, stainless steel look VISUALIZATION
    Visucontrol, ACC, 10" Cover frame, stainless steel look
    13334
    VCB-10SI.03 VISUCONTROL, ACC, 10" COVER FRAME, STAINLESS STEEL LOOK VISUALIZATION
    14783 BE-GTR3S.01 Glass cover frame for 55 mm range 3-fold PUSH BUTTONS
    Passend für 55mm Programme z.B.:
    - MDT Taster und Taster Plus
    - BERKER S1, B1, B3, B7
    - JUNG A500, Aplus
    - GIRA Standard 55, E2, Event, Esprit
    - MERTEN M-Smart, M-Arc, M-Plan

    Varianten:
    1-fach - Abmessungen 92mm x 92mm
    2-fach - Abmessungen 92mm x 163mm
    3-fach - Abmessungen 92mm x 234mm
    14783
    BE-GTR3S.01 GLASS COVER FRAME FOR 55 MM RANGE 3-FOLD PUSH BUTTONS
    16999 SCN-PTST1.01 Temperature Sensor for PT1000 standard 1m SENSORS
    Dimensions 4mm x 30mm, 1m cable
    16999
    SCN-PTST1.01 TEMPERATURE SENSOR FOR PT1000 STANDARD 1M SENSORS
    17981 AKK-0216.03 Switch Actuator 2-fold 2SU MDRC, 230VAC, 16A ACTUATORS - OUTPUTS


    Description
    The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 16 independent electrical loads.
    Each output uses a bistable relay.
    Image

        Production in Germany, certified according to ISO 9001
        Function extension
        Push Button and LED indivator for each channel
        NO and NC contact operation
        Status response at manually operation
        Time functions (switch-on/switch-off delay
        Extensive staircase light and impulse functions
        Status response (active/passive) for each channel
        Logical linking of binary data
        Extendend scene functions for each channel
        Central switching functions and block functions
        Adjustable behavior in case of bus voltage failure or return
        Power supply via KNX bus
        Quick application download (long frame support for ETS5)
        3 years warranty

    17981
    AKK-0216.03 SWITCH ACTUATOR 2-FOLD 2SU MDRC, 230VAC, 16A ACTUATORS - OUTPUTS
    18535 STV-0320.02 KNX 320 mAh Power Supply SYSTEM DEVICES

    The MDT KNX/EIB Power Supply with integrated choke produces the stabilized KNX system voltage (30VDC) to supply the connected KNX/EIB components. The operating status is indicated via 3 LED.

    • Production in Germany, certified according to ISO 9001
    • KNX power supply with integrated choke
    • Mains voltage 230VAC
    • Short-circuit-proof
    • Overload safe
    • Temperature control with shutdown at over temperature
    • LED indicator for bus reset, normal operation and bus overload
    • Choke free output (STV-640.02 only)
    • Modular installation device for DIN 35mm rails
    • Integrated bus coupling unit
    • 3 years warranty
    18535
    STV-0320.02 KNX 320 MAH POWER SUPPLY SYSTEM DEVICES
    18536 STV-0160.02 KNX 160 mAh Power Supply + Power supply Meanwell DR30-24 1.5A for extra output SYSTEM DEVICES

    Description
    The KNX bus voltage supply offers a stabilized DC voltage equal to 30VDC with integrated KNX / EIB throttle. Three colored LEDs on top of the device indicate the current operating status.

    • Engelskirchen production, certified according to ISO 9001
    • KNX bus voltage supply with integrated accelerator
    • Power supply 230 VAC
    • Short circuit test
      Of overload
    • Control with overtemperature temperature shut-off
    • LED display for bus reset, normal operation and overload
    • Unverdrosselter output only (STV 640.02)
    • DIN Rail Device 35 mm
    • Integrated Bus Coupler
    18536
    STV-0160.02 KNX 160 MAH POWER SUPPLY + POWER SUPPLY MEANWELL DR30-24 1.5A FOR EXTRA OUTPUT SYSTEM DEVICES


    KNX SPECIAL CATALOGUES
    Different looks for KNX push buttons
    Push buttons
    Smart metering
    Iddero Verso Interactive Presentation

    LEARN
    Free webinars
    uBrick Tutorials
    VideoTutorials CBSE


    PARTICIPATE
    µBrick Trivia
    KNX Tips & tricks
    TEST
    Free test of CBSE visualization

    LATEST KNX NEWS
    All news

    LATEST KNX OFFERS
    All offers
    DOWNLOADS
    KNX - All brands

    FUTURASMUS KNX GROUP
    Contact
    Location
    Futurasmus in the world
    FOLLOW US
    YouTube Channel
    Facebook
    LinkedIN
    Google+
    Twitter

    KNX++ TRAINING CENTER
    Futurasmus Zentrum

    CERTIFIED KNX TEST LAB
    Futurasmus KNX Lab
    SPECIALIZED KNX WHOLESALER CERTIFIED KNX TRAINING CENTRE
    Futurasmus KNX Group is a highly specialized and internationally active KNX Wholesaler, being our forte the excellent technical support we provide. You can visit our online catalogue in this website and, if you are a professional, ask for a non binding offer for your KNX projects. Should you be interested in buying KNX components, you are welcome to read our General Sales Conditions and contact our technicians and commercial agents per telephone, e-mail or online help. Since 2003 we have been a Certified Training Centre KNX++, which means that we are entitled to impart the KNX Basic Course as well as the KNX Advanced Course and KNX Tutor Course. We are manufacturer-independent and also offer other specialized and monographic KNX seminars. After teaching more than 1.500 KNX partners, our KNX Trainers have quite a large and positive expertise. Please, contact us for customized KNX training worldwide (groups of at least 8 people) at training@futurasmus-knxgroup.org
    USE OF COOKIES
    We use our own and third-party cookies, analyzing your browsing habits in out website, with the finality of ensuring the quality, security and improvement of the offered services through the same. In the case that the user does not explicitly state whether to accept the installation of cookies, but continues using our website, it will mean that he has consented expressly, informing him about the possibility to block or remove the installed cookies on his computer by configuring the appropriate settings of the browser. You can get more information on this subject reading our "Cookies Policy".