|
Web Code
|
Reference
|
Description
|
Category
|
Price
|
|
467 |
6010-25 |
IR REMOTE CONTROL |
OTHER ACCESSORIES |
|
|
Busch-Remote-Control IR
Transmitters
IR Remote Control
Network-independent infrared remote control. For infrared receiver (60xx). for Busch Watchdog Presence tech (6813 / 11), Forr EIB-sensors with Infrarot Interface (632x-xxx, 6129-xx und 6135-xxx). For switching / dimming up to 10 consumers in 2 groups (1-5 / 6-10). Programming and selection of 2 MEMO memories possible per group. Supply from 4 alkaline manganese batteries, IEC LR03 (microcell). Not included in delivery. Range: 15 m
Rated voltage: 6 V-
For function together with EIB flush-mounted, infrared interface, see Technical Manual. Except 6321- and 6326--101
|
467
|
6010-25
|
IR REMOTE CONTROL
|
OTHER ACCESSORIES
|
|
|
519 |
6119/20 |
6119/20 2f-Universalschnittstelle, UP |
INPUTS |
|
|
Busch-Installationsbus? EIB / KNX
UP-Systemschnittstellen
Unterputz Universalschnittstelle
2fach
Schnittstelle mit 2 Kan?len als Ein-oder Ausg?nge parametrierbar. Anschlussleitungen max. 10 m Eing?nge f?r potenzialfreie Kontakte. Ausg?nge: 5 V max. 2 mA (z. B. LED) F?r UP-Dosen mit 60 mm Tiefe, auch f?r Hohlwanddosen oder AP-Geh?use 2647 WS geeignet. Ma?e 39 x 40 x 12
Anschl?sse: EIB-Linie: Busanschlussklemme
Eing?nge: 2 Abfragespannung: 20 V
Ausg?nge: 2 elektronischer Ausgang, potenzialgebunden Nennstrom: 2 mA
Schutzart Ger?t: IP 20 Temperaturbereich Ger?t: -5 ?C - 45 ?C
Ma?e (H x B x T): 39 mm x 40 mm x 12 mm
|
519
|
6119/20
|
6119/20 2F-UNIVERSALSCHNITTSTELLE, UP
|
INPUTS
|
|
|
520 |
6119/40 |
4fach Universalschnittstelle 6119/40 |
INPUTS |
|
|
Busch-Installationsbus? EIB / KNX
UP-Systemschnittstellen
Unterputz Universalschnittstelle
4fach
Schnittstelle mit 4 Kan?len als Ein-oder Ausg?nge parametrierbar. Anschlussleitungen max. 10 m Eing?nge f?r potenzialfreie Kontakte. Ausg?nge: 5 V max. 2 mA (z. B. LED) F?r UP-Dosen mit 60 mm Tiefe, auch f?r Hohlwanddosen oder AP-Geh?use 2647 WS geeignet. Ma?e 39 x 40 x 12 mm
Anschl?sse: EIB-Linie: Busanschlussklemme
Eing?nge: 4 Abfragespannung: 20 V
Ausg?nge: 4 elektronischer Ausgang, potenzialgebunden Nennstrom: 2 mA
Schutzart Ger?t: IP 20 Temperaturbereich Ger?t: -5 ?C - 45 ?C
Ma?e (H x B x T): 39 mm x 40 mm x 12 mm
|
520
|
6119/40
|
4FACH UNIVERSALSCHNITTSTELLE 6119/40
|
INPUTS
|
|
|
702 |
6164/20 |
System technology / ABB i-bus® EIB/KNX for busch-jaeger / Valve adapter VA 80
|
SIN FAMILIA |
|
|
System technology / ABB i-bus® EIB/KNX for busch-jaeger / Valve adapter VA 80
Valve adapter
Component part
Serves for installing the actuating mechanism on an angle-type valve.
For thermoelectric positioners.
Angle-type valve manufacturers: Heimeier, Oventrop, Schlösser, Herb, Onda.
Manufacturer: Busch-Jaeger Elektro GmbH
Article Number: 6164/20
Deliver and assemble,
or equivalent.
Product offered:
Type:
. |
702
|
6164/20
|
SYSTEM TECHNOLOGY / ABB I-BUS® EIB/KNX FOR BUSCH-JAEGER / VALVE ADAPTER VA 80
|
SIN FAMILIA
|
|
|
703 |
6164/21 |
System technology / ABB i-bus® EIB/KNX for busch-jaeger / Valve adapter VA 50 |
SIN FAMILIA |
|
|
System technology / ABB i-bus® EIB/KNX for busch-jaeger / Valve adapter VA 50
Valve adapter
Component part
Serves for installing the actuating mechanism on an angle-type valve.
For thermoelectric positioners.
Angle-type valve manufacturers: MNG, Honeywell & Brauck., Landis & Gyr, Reich
Connections:
Power supply: M30*1.5
Manufacturer: Busch-Jaeger Elektro GmbH
Article Number: 6164/21
Deliver and assemble,
or equivalent.
Product offered:
Type:
|
703
|
6164/21
|
SYSTEM TECHNOLOGY / ABB I-BUS® EIB/KNX FOR BUSCH-JAEGER / VALVE ADAPTER VA 50
|
SIN FAMILIA
|
|
|
704 |
6164/22 |
System technology / ABB i-bus® EIB/KNX for busch-jaeger / Valve adapter VA 78 |
SIN FAMILIA |
|
|
System technology / ABB i-bus® EIB/KNX for busch-jaeger / Valve adapter VA 78
Valve adapter
Component part
Serves for installing the actuating mechanism on an angle-type valve.
For thermoelectric positioners.
Angle-type valve manufacturers: Danfoss.
Manufacturer: Busch-Jaeger Elektro GmbH
Article Number: 6164/22
Deliver and assemble,
or equivalent.
Product offered:
Type:
|
704
|
6164/22
|
SYSTEM TECHNOLOGY / ABB I-BUS® EIB/KNX FOR BUSCH-JAEGER / VALVE ADAPTER VA 78
|
SIN FAMILIA
|
|
|
705 |
6164/23 |
VENTILADAPTER VA |
SIN FAMILIA |
|
|
System technology / ABB i-bus® EIB/KNX for busch-jaeger / Valve adapter VA 02
Valve adapter
Component part
Serves for installing the actuating mechanism on an angle-type valve.
For thermoelectric positioners.
Angle-type valve manufacturers: Velta.
Connections:
Power supply: M30*1.5 (external)
Manufacturer: Busch-Jaeger Elektro GmbH
Article Number: 6164/23
Deliver and assemble,
or equivalent.
Product offered:
Type:
|
705
|
6164/23
|
VENTILADAPTER VA
|
SIN FAMILIA
|
|
|
723 |
6180/11 |
System technology / ABB i-bus® EIB/KNX for busch-jaeger/ Uninterruptible voltage supply |
SYSTEM DEVICES |
|
|
System technology / ABB i-bus® EIB/KNX for busch-jaeger/ Uninterruptible voltage supply
Uninterruptible EIB power supply 640 mA, SELV
Rail-mounting
For installation bus EIB
For generating system voltage
- Buffering of the voltage supply in case of mains power failure (by connecting two to three batteries)
- Integrated choke
Connections:
Power supply: non-screw terminals, 0.2 - 2.5 mm²
secondary: Bus terminal
EIB-line: Bus terminal
Dimensions: (L x W x D): 90 mm x 144 mm x 64 mm
module width: 8 TE
Design: per M-Design
Technical data:
Rated voltage: 230 V~, +10 % / -15 %
Secondary: 30 V, +2 V / -2 V
Rated frequency: 50 Hz - 60 Hz
Power dissipation: 6 W
Control Covers: Reset switch
Display elements: Status indication via LEDs
Outputs: 1, short-circuit protected
Suitable for:
Rated current: 640 mA
Physical properties:
Protection class (Device): IP 20
Temperature range (Device): -5 °C - 45 °C
Manufacturer: Busch-Jaeger Elektro GmbH
Article Number: 6180/11
Deliver and assemble ready for operation,
or equivalent.
Product offered:
Type:
|
723
|
6180/11
|
SYSTEM TECHNOLOGY / ABB I-BUS® EIB/KNX FOR BUSCH-JAEGER/ UNINTERRUPTIBLE VOLTAGE SUPPLY
|
SYSTEM DEVICES
|
|
|
724 |
6180/12 |
System technology / ABB i-bus® EIB/KNX for busch-jaeger / Battery module
System technology / ABB i-bus® EIB/KNX for busch-jaeger / Battery module
|
SYSTEM DEVICES |
|
|
System technology / ABB i-bus® EIB/KNX for busch-jaeger / Battery module
Battery module, 12 VDC
Rail-mounting
For installation bus EIB
Lead-gel battery for bridging power failures
Maximum bridging time of 10 min at full load
Connections:
Power supply: screw terminals, 0.2 - 2.5 mm²
Dimensions: (L x W x D): 90 mm x 144 mm x 64 mm
module width: 8 TE
Design: per M-Design
Technical data:
Rated voltage: 12 V-
Outputs: 1
Physical properties:
Protection class (Device): IP 20
Temperature range (Device): -5 °C - 45 °C
Manufacturer: Busch-Jaeger Elektro GmbH
Article Number: 6180/12
Deliver and assemble ready for operation,
or equivalent.
Product offered:
Type:
|
724
|
6180/12
|
SYSTEM TECHNOLOGY / ABB I-BUS® EIB/KNX FOR BUSCH-JAEGER / BATTERY MODULE
SYSTEM TECHNOLOGY / ABB I-BUS® EIB/KNX FOR BUSCH-JAEGER / BATTERY MODULE
|
SYSTEM DEVICES
|
|
|
729 |
6183-101 |
System technology / ABB i-bus® EIB/KNX for busch-jaeger / Bushing clamp |
SYSTEM DEVICES |
|
|
System technology / ABB i-bus® EIB/KNX for busch-jaeger / Bushing clamp
EIB terminal, 4-pole
For installation bus EIB
For connecting the bus line (second pair of wires) to EIB devices.
Can also be used as branch terminal for the bus lines.
white, yellow
Connections:
Power supply: non-screw terminals, 0.6 - 0.8 mm
Physical properties:
Temperature range (Device): -5 °C - 45 °C
Manufacturer: Busch-Jaeger Elektro GmbH
Article Number: 6183-101
Deliver and assemble,
or equivalent.
Product offered:
Type:
|
729
|
6183-101
|
SYSTEM TECHNOLOGY / ABB I-BUS® EIB/KNX FOR BUSCH-JAEGER / BUSHING CLAMP
|
SYSTEM DEVICES
|
|
|
733 |
6186 USB |
6186 USB-Schnittstelle |
SYSTEM DEVICES |
|
|
Busch-Installationsbus® EIB / KNX
REG-Systemschnittstellen
REG-Schnittstelle USB
Zur Ankopplung eines PC an den EIB. Der Busanschluss erfolgt über die beiliegende Busklemme.
Anzeigeelemente: LED T: Telegrammverkehr auf den Bus, LED K: Kommunikation über die Schnittstelle
Anschlüsse: EIB-Linie: Busanschlussklemme
Schutzart Gerät: IP 20 Temperaturbereich Gerät: -5 °C - 45 °C
Maße (H x B x T): 90 mm x 36 mm x 61 mm Einbautiefe: 68 mm Teilungseinheit: 2 TE
|
733
|
6186 USB
|
6186 USB-SCHNITTSTELLE
|
SYSTEM DEVICES
|
|
|
743 |
6190/41 |
System technology / ABB i-bus® EIB/KNX for busch-jaeger / Weather Station wind velocity transmitter
|
SENSORS |
|
|
System technology / ABB i-bus® EIB/KNX for busch-jaeger / Weather Station wind velocity transmitter
EIB wind velocity transmitter, linear
Surface-mounted
For installation bus EIB
For detecting the measuring values for the Weather Station.
Measuring range 0.7 - 40 m/s linear, short-term 60 m/s
The voltage supply for the measuring operation is provided by the Weather Station.
Intended for external installation
The integrated heating enables trouble-free operation at ambient temperatures down to -25°C. Transformer available as an accessory.
Connections:
Inputs: Connection cable LiYY
Length: 3 m
Dimensions: (L x W x D): 160 mm x 124 mm
Technical data:
Rated voltage: 24 V-, +8 V / -6 V
Inputs:
Polling voltage: , 0 - 10 V to GND at 1 kOhm minimum load impedance
Signal current: 12 mA, without heating
max. length of sensor line: 100 m
cross-section sensor conductor: 0.25 mm²
optional heating: 24 V, 4.5 W, PTC element with up to 80º C
Physical properties:
Protection class (Device): IP 65
Temperature range (Device): -25 °C - 60 °C
Manufacturer: Busch-Jaeger Elektro GmbH
Article Number: 6190/41
Deliver and assemble ready for operation,
or equivalent.
Product offered:
Type:
|
743
|
6190/41
|
SYSTEM TECHNOLOGY / ABB I-BUS® EIB/KNX FOR BUSCH-JAEGER / WEATHER STATION WIND VELOCITY TRANSMITTER
|
SENSORS
|
|
|
744 |
6190/42 |
System technology / ABB i-bus® EIB/KNX for busch-jaeger / Weather Station temperature-value transmitter |
SENSORS |
|
|
Busch-Installationsbus® EIB / KNX
REG-Sensoren
Temperaturmesswertgeber
linear
Für Wetterstation 6190 / 40. Dient zur Umsetzung der gemessenen Temperatur (-30 bis +70 Grad) in elektrische Signale (0-10 V). Empfohlene Zuleitung 3 x 0, 25 mm² (max. 100 m)
Nennspannung: 24 V-, +8 V / -6 V
Eingänge: Abfragespannung: , 0 - 10 V- gegen GND bei 1 kOhm minimaler Bürde
Schutzart Gerät: IP 65 Temperaturbereich Gerät: -30 °C - 70 °C
Maße (H x B x T): 58 mm x 83 mm x 35 mm
|
744
|
6190/42
|
SYSTEM TECHNOLOGY / ABB I-BUS® EIB/KNX FOR BUSCH-JAEGER / WEATHER STATION TEMPERATURE-VALUE TRANSMITTER
|
SENSORS
|
|
|
745 |
6190/43 |
System technology / ABB i-bus® EIB/KNX for busch-jaeger / Weather Station rain sensor |
SENSORS |
|
|
System technology / ABB i-bus® EIB/KNX for busch-jaeger / Weather Station rain sensor
EIB rain sensor, linear
Surface-mounted
For installation bus EIB
For detecting the measuring values for the Weather Station.
The voltage supply for the measuring operation is provided by the Weather Station.
Intended for external installation
The sensor indicates whether the surface has water on-> no conductivity is defined as "no precipitation"
With increased evaporation, a signal is given when the precipitation ends.
The integrated heating enables trouble-free operation at ambient temperatures down to -25°C. Transformer available as an accessory.
Installation position approx. 45°
Connections:
Inputs: Connection cable LiYY
Length: 3 m
Dimensions: (L x W x D): 58 mm x 83 mm x 17 mm
Technical data:
Rated voltage: 24 V-, +8 V / -6 V
Inputs:
Polling voltage: , 0 - 10 V to GND at 1 kOhm minimum load impedance
Signal current: 10 mA
max. length of sensor line: 100 m
cross-section sensor conductor: 0.25 mm²
optional heating: 24 V, 4.5 W, PTC element with up to 80º C
Physical properties:
Protection class (Device): IP 65
Temperature range (Device): -30 °C - 70 °C
Manufacturer: Busch-Jaeger Elektro GmbH
Article Number: 6190/43
Deliver and assemble ready for operation,
or equivalent.
Product offered:
Type:
|
745
|
6190/43
|
SYSTEM TECHNOLOGY / ABB I-BUS® EIB/KNX FOR BUSCH-JAEGER / WEATHER STATION RAIN SENSOR
|
SENSORS
|
|
|
746 |
6190/44 |
System technology / ABB i-bus® EIB/KNX for busch-jaeger/ Weather Station dusk-value transmitter
|
SENSORS |
|
|
System technology / ABB i-bus® EIB/KNX for busch-jaeger/ Weather Station dusk-value transmitter
EIB dusk-value transmitter, linear
Surface-mounted
For installation bus EIB
For detecting the measuring values for the Weather Station.
The voltage supply for the measuring operation is provided by the Weather Station.
The dusk-value transmitter is suitable for internal or external installation
The device is fitted with pressure-equalizing elements for preventing moisture precipitation on the inside of the box.
Cable entry with PG7 screwing sealed.
Connections:
Signal/sensor wire: screw terminals, max. 2.5 mm²
Dimensions: (L x W x D): 58 mm x 83 mm x 35 mm
Technical data:
Rated voltage: 24 V-, +8 V / -6 V
Inputs:
Polling voltage: , 0 - 10 V to GND at 1 kOhm minimum load impedance
Signal current: 5 mA
Measuring range:
Brightness: 0 - 255 lux
max. length of sensor line: 100 m
cross-section sensor conductor: 0.25 mm²
Physical properties:
Protection class (Device): IP 65
Temperature range (Device): -30 °C - 70 °C
Manufacturer: Busch-Jaeger Elektro GmbH
Article Number: 6190/44
Deliver and assemble ready for operation,
or equivalent.
Product offered:
Type:
|
746
|
6190/44
|
SYSTEM TECHNOLOGY / ABB I-BUS® EIB/KNX FOR BUSCH-JAEGER/ WEATHER STATION DUSK-VALUE TRANSMITTER
|
SENSORS
|
|
|
747 |
6190/45 |
System technology / ABB i-bus® EIB/KNX for busch-jaeger / Weather Station brightness-value transmitter
System technology / ABB i-bus® EIB/KNX for busch-jaeger / Weather Station brightness-value transmitter
|
SENSORS |
|
|
System technology / ABB i-bus® EIB/KNX for busch-jaeger / Weather Station brightness-value transmitter
EIB brightness-value transmitter, linear
Surface-mounted
For installation bus EIB
For detecting the measuring values for the Weather Station.
The voltage supply for the measuring operation is provided by the Weather Station.
The brightness-value transmitter is suitable for internal or external installation
The device is fitted with pressure-equalizing elements for preventing moisture precipitation on the inside of the box.
Cable entry with PG7 screwing sealed.
Connections:
Signal/sensor wire: screw terminals, max. 2.5 mm²
Dimensions: (L x W x D): 83 mm x 58 mm x 35 mm
Technical data:
Rated voltage: 24 V-, +8 V / -6 V
Inputs:
Polling voltage: , 0 - 10 V to GND at 1 kOhm minimum load impedance
Signal current: 5 mA
Measuring range:
Brightness: 3,000 - 60,000 lux
max. length of sensor line: 100 m
cross-section sensor conductor: 0.25 mm²
Physical properties:
Protection class (Device): IP 65
Temperature range (Device): -30 °C - 70 °C
Manufacturer: Busch-Jaeger Elektro GmbH
Article Number: 6190/45
Deliver and assemble ready for operation,
or equivalent.
Product offered:
Type:
|
747
|
6190/45
|
SYSTEM TECHNOLOGY / ABB I-BUS® EIB/KNX FOR BUSCH-JAEGER / WEATHER STATION BRIGHTNESS-VALUE TRANSMITTER
SYSTEM TECHNOLOGY / ABB I-BUS® EIB/KNX FOR BUSCH-JAEGER / WEATHER STATION BRIGHTNESS-VALUE TRANSMITTER
|
SENSORS
|
|
|
750 |
6191/11-101 |
System technology / ABB i-bus® EIB/KNX for busch-jaeger / Power pack 12 V/1.600 mA
|
SYSTEM DEVICES |
|
|
System technology / ABB i-bus® EIB/KNX for busch-jaeger / Power pack 12 V/1.600 mA
EIB power pack 12 V, 1600 mA
Rail-mounting
For installation bus EIB
As auxiliary supply in EIB units or for other SELV applications.
The output is permanently short-circuit protected and thermally protected
Particularly suitable for applications with the following EIB devices:
Signal-device group terminal
and universal input/output module 32gang
Connections:
Power supply: screw terminals, 0.2 - 2.5 mm²
secondary: screw terminals, 0.2 - 2.5 mm²
Dimensions: (L x W x D): 90 mm x 72 mm x 64 mm
Installation depth: 68 mm
module width: 4 TE
Design: per M-Design
Technical data:
Rated voltage: 230 V, +10 % / -15 %
Output voltage: 12 V, +1 % / -1 %
Rated frequency: 50 Hz - 60 Hz
Power dissipation: 5 W
Display elements: LEDs green: Status of supply voltage or output voltage
Outputs:
Suitable for:
Rated current: 1600 mA
Physical properties:
Protection class (Device): IP 20
Temperature range (Device): -5 °C - 45 °C
Manufacturer: Busch-Jaeger Elektro GmbH
Article Number: 6191/11-101
Deliver and assemble ready for operation,
or equivalent.
Product offered:
Type:
|
750
|
6191/11-101
|
SYSTEM TECHNOLOGY / ABB I-BUS® EIB/KNX FOR BUSCH-JAEGER / POWER PACK 12 V/1.600 MA
|
SYSTEM DEVICES
|
|
|
752 |
6193/33-101 |
System technology / ABB i-bus® EIB/KNX for busch-jaeger / Power pack 24V/800 mA |
SYSTEM DEVICES |
|
|
System technology / ABB i-bus® EIB/KNX for busch-jaeger / Power pack 24V/800 mA
EIB power pack 24 V, 800 mA SELV
Rail-mounting
For installation bus EIB
As auxiliary supply in EIB units or for other SELV applications.
The output is permanently short-circuit protected and thermally protected
Particularly suitable for applications with the following EIB devices:
Signal-device group terminal
and universal input/output module 32gang
Connections:
Power supply: screw terminals, 0.2 - 2.5 mm²
secondary: screw terminals, 0.2 - 2.5 mm²
Dimensions: (L x W x D): 90 mm x 72 mm x 64 mm
Installation depth: 68 mm
module width: 4 TE
Design: per M-Design
Technical data:
Rated voltage: 230 V, +10 % / -15 %
Output voltage: 24 V, +1 % / -1 %
Rated frequency: 50 Hz - 60 Hz
Power dissipation: 5 W
Display elements: LEDs green: Status of supply voltage or output voltage
Outputs:
Suitable for:
Rated current: 800 mA
Physical properties:
Protection class (Device): IP 20
Temperature range (Device): -5 °C - 45 °C
Manufacturer: Busch-Jaeger Elektro GmbH
Article Number: 6193/33-101
Deliver and assemble ready for operation,
or equivalent.
Product offered:
Type:
|
752
|
6193/33-101
|
SYSTEM TECHNOLOGY / ABB I-BUS® EIB/KNX FOR BUSCH-JAEGER / POWER PACK 24V/800 MA
|
SYSTEM DEVICES
|
|
|
924 |
6987/10 |
System technology / ABB Powernet® for busch-jaeger EIB/KNX / Teleswitch |
POWER LINE |
|
|
System technology / ABB Powernet® for busch-jaeger EIB/KNX / Teleswitch
EIB Teleswitch, Analogue
Rail-mounting
For Powernet EIB
For remote-signalling/switching via the telephone network.
Remote control can be effected using 4 conventional switch outputs or 6 EIB channels.
In addition, 4 signal inputs for potential free contacts and 2 EIB signal channels are available.
Additional alarm contact that is activated if a signal is not sent to.
The following options are adjustable/selectable on the device:
3 address signals
Selection procedure
Entrance code
Output of MFV signals
EIB functions/addresses
Recording of personal announcements possible.
With 3 m connection cable with TAE plug for exchange line.
Europe registration, CTR 21.
The following applications are provided for the inputs and outputs:
Inputs: Calling
Outputs: Switching
Connections:
Power supply: Screw/clamp terminals, max. 1.5 mm²
Inputs: Screw/clamp terminal strip
Outputs: Screw/clamp terminal strip
EIB-line: Screw terminals 1 - 2.5 mm²
Dimensions: (L x W x D): 90 mm x 171 mm x 65 mm
Installation depth: 68 mm
module width: 9.5 TE
Technical data:
Rated voltage: 230 V~, +6 % / -14 %
Rated frequency: 50 Hz
Control Covers: 5 push buttons for entering the basic settings
Display elements: LCD display for start-up and signal acknowledgement
Inputs: 4
Polling voltage: , potential-separated
optional power supply: 12 V -/ 24 V-
Outputs: 4, Normally open contact, potential-bound
Supply voltage: 24 V
Suitable for:
Rated current: 50 mA, cos phi 1
Output voltage: 24 V~
Control/Signal outputs: 1, Alarm contact/normally open contact, potential-bound
Physical properties:
Protection class (Device): IP 20
Temperature range (Device): -5 °C - 45 °C
Manufacturer: Busch-Jaeger Elektro GmbH
Article Number: 6986/10
Deliver and assemble ready for operation,
or equivalent.
Product offered:
Type:
|
924
|
6987/10
|
SYSTEM TECHNOLOGY / ABB POWERNET® FOR BUSCH-JAEGER EIB/KNX / TELESWITCH
|
POWER LINE
|
|
|
933 |
6181-101 |
System technology / ABB i-bus® EIB/KNX for busch-jaeger / Choke
|
SYSTEM DEVICES |
|
|
System technology / ABB i-bus® EIB/KNX for busch-jaeger / Choke
EIB choke, SELV
Rail-mounting
For installation bus EIB
For installation next to a voltage supply.
With integrated reset-switch for disconnecting the bus line.
Connections:
Power supply: Bus terminal
EIB-line: Bus terminal
Dimensions: (L x W x D): 90 mm x 36 mm x 64 mm
module width: 2 TE
Design: per M-Design
Technical data:
Rated voltage: 30 V
Control Covers: Automatic reset function
Display elements: Operating LED
Outputs: 1
Supply voltage: 29 V
Suitable for:
Rated current: 500 mA
Physical properties:
Protection class (Device): IP 20
Temperature range (Device): -5 °C - 45 °C
Manufacturer: Busch-Jaeger Elektro GmbH
Article Number: 6181-101
Deliver and assemble ready for operation,
or equivalent.
Product offered:
Type:
|
933
|
6181-101
|
SYSTEM TECHNOLOGY / ABB I-BUS® EIB/KNX FOR BUSCH-JAEGER / CHOKE
|
SYSTEM DEVICES
|
|
|
934 |
6183 |
System technology / ABB i-bus® EIB/KNX for busch-jaeger / Terminal block/connector |
SYSTEM DEVICES |
|
|
System technology / ABB i-bus® EIB/KNX for busch-jaeger / Terminal block/connector
EIB bus connection terminal, 4-pole
For installation bus EIB
For connecting the bus line.
Can also be used as branch terminal for the bus lines.
red, black
Connections:
Power supply: non-screw terminals, 0.6 - 0.8 mm
Manufacturer: Busch-Jaeger Elektro GmbH
Article Number: 6183
Deliver and assemble,
or equivalent.
Product offered:
Type:
|
934
|
6183
|
SYSTEM TECHNOLOGY / ABB I-BUS® EIB/KNX FOR BUSCH-JAEGER / TERMINAL BLOCK/CONNECTOR
|
SYSTEM DEVICES
|
|
|
3797 |
6183 VA |
Überspannungsschutzklemme 2-polig, 6183 VA |
SYSTEM DEVICES |
|
|
Busch-Installationsbus® EIB / KNX
Systemzubehör
Überspannungsschutzklemme EIB
2-polig
Für den Überspannungsfeinschutz von EIB-Komponeten.
Temperaturbereich Gerät: -5 °C - 45 °C
|
3797
|
6183 VA
|
ÜBERSPANNUNGSSCHUTZKLEMME 2-POLIG, 6183 VA
|
SYSTEM DEVICES
|
|
|
5213 |
6981 |
Bandsperre EIB, REG, 6981 |
POWER LINE |
|
|
Busch-Powernet® EIB / KNX
REG-Systemgeräte
Bandsperre
1fach
Zur physikalischen Abgrenzung einer Busch-Powernet® EIB / KNX Anlage. Bis zu 6 Bandsperren pro Phase parallel schließbar.
Nennspannung: 230 V~, +10% / -10% Nennfrequenz: 50 Hz
Nennstrom: 63 A
Schutzart Gerät: IP 20 Temperaturbereich Gerät: -5 °C - 45 °C
Maße (H x B x T): 90 mm x 45 mm x 64 mm Einbautiefe: 68 mm Teilungseinheit: 2, 5 TE
|
5213
|
6981
|
BANDSPERRE EIB, REG, 6981
|
POWER LINE
|
|
|
5214 |
6984 |
Phasenkoppler P-NET, REG, 6984 |
POWER LINE |
|
|
Busch-Powernet® EIB / KNX
REG-Systemgeräte
Phasenkoppler
3-phasig
Zur definierten Phasenkopplung. Frequenzbereich 50 - 150 KHz
Anschlüsse: EIB-Linie: Schraubklemmen 1, 0 - 4 mm²
Nennspannung: 400 V~, +10% / -10% Nennfrequenz: 50 Hz
Temperaturbereich Gerät: -5 °C - 45 °C
Maße (H x B x T): 90 mm x 18 mm x 64 mm Einbautiefe: 68 mm Teilungseinheit: 1 TE |
5214
|
6984
|
PHASENKOPPLER P-NET, REG, 6984
|
POWER LINE
|
|
|
5219 |
6997/60 |
Steuerbaustein P-NET, REG, 2-fach, 6997/60 |
POWER LINE |
|
|
Busch-Powernet® EIB / KNX
REG-Aktoren
Steuerbaustein
2fach
Zur unabhängigen Ansteuerung von drei Aktormodulen pro Datenausgang, bestehend aus 2fach Schaltaktormodul 6994 / 20, 4fach Schaltaktormodul 6995 / 40 oder 2fach Jalousieaktormodul 6996 / 20. Alternativer Anschluss von bis zu 9 Universal-Zentraldimmer 6583 pro Datenausgang im Parallelbetrieb möglich. Zwei Eingänge 230 V~, 50 Hz als Binäreingang oder zur "Vor-Ort-Bedienung" über konventionelle Taster (2020 US, 2021 / 6 UK).
Anschlüsse: EIB-Linie: Schraubklemmen 1 - 2, 5 mm²
Nennspannung: 230 V~, +10% / -10% Nennfrequenz: 50 Hz
Eingänge: 2 Abfragespannung: , potenzialbezogen
Ausgänge: 2 elektronischer Ausgang, Digitales Signal Bezugspotenzial N max. Länge: 2 m
Schutzart Gerät: IP 20 Temperaturbereich Gerät: -5 °C - 45 °C
Maße (H x B x T): 90 mm x 36 mm x 65 mm Einbautiefe: 68 mm Teilungseinheit: 2 TE
|
5219
|
6997/60
|
STEUERBAUSTEIN P-NET, REG, 2-FACH, 6997/60
|
POWER LINE
|
|
|
5307 |
6197/40 |
DALI gateway, 8-fold, MDRC |
GATEWAYS |
|
|
For controlling DALI devices (electronic ballasts, transformers etc.) via the bus. There are 8 separate, independent DALI outputs/channels available. Up to 16 DALI devices can be connected per channel with a maximum of 128 devices on the gateway. The functions of switching, dimming, set values and fault indication for lamps and electronic ballasts are available for each output. It is possible to set the lamp burning time and 16 lightscenes.
The addressing or commissioning of the DALI devices is not necessary.
|
5307
|
6197/40
|
DALI GATEWAY, 8-FOLD, MDRC
|
GATEWAYS
|
|
|
5447 |
6146/10 |
Brightness sensor, 3-channel, MDRC |
SENSORS |
|
|
Brightness sensor, 3-channel, MDRC
For switching lighting and other loads via Busch-Installationsbus® EIB switching actuators dependent on the daylight light intensity. The device can be used as a twilight switch (1.10 lux) or a light level switch (100.20,000 lux). The light sensor is supplied with the device.
|
5447
|
6146/10
|
BRIGHTNESS SENSOR, 3-CHANNEL, MDRC
|
SENSORS
|
|
|
9176 |
6120/13 |
Power BCU Busch-priOn |
SYSTEM DEVICES |
|
|
Der Koppler ermöglicht den Anschluss von Busch-Installationsbus-Sensoren/Aktoren
an eine KNX-Buslinie. Um das Gerät in Betrieb nehmenzu können, müssen Sie die
physikalische Adressse sowie dielogische Adresse(Gruppenadresse) vergeben.
Weiterhin muss die Funktionsweisedes Kopplers bestimmt werden.
Physikalische Adresse vergeben
_ Schließen Sie einen PC mit derEIBA-Software (ab ETS 3.0 d)
mittels KNX-REG-Schnittstelle (Art.-Nr. 6186/20, 6186 USB oder
dem Inbetriebnahmeadapter 6149/21) an die KNX-Buslinie an.
_ Drücken Sie die Programmiertaste am Koppler:
die rote (Programmier-)LED (Fig. 1, Pos. 5) leuchtet.
_ Nach der Programmierung der pysikalischen Adresse erlischt die
rote LED.
_ Vermerken Sie mit einem wischfesten Stift die Nummer der
physikalischen Adresse auf dem Etikett (Fig.1, Pos. 2).
Gruppenadresse(n) vergeben
_ Die Gruppenadressen werden über den PC in Verbindung mit der
ETS 3.0 d vergeben. Applikation wählen Die Funktionsweise des Kopplers ist
abhängig von der Art des verwendeten Sensors/Aktors
(Applikationen). Hierzu verweisen wir auf unseren Internet-Support.
Applikation differenzieren
Die Auswahl der Applikation erfolgt über die ETS 3.0 d-Software. Andere
in den Koppler zu ladende Daten der von Ihnen gewählten Applikation
finden Sie in der Datenbank von Busch-Jaeger.
Die Möglichkeiten dieser
Applikationen sind in den zugehörigen, separaten
Betriebsanleitungen der UPSensoren beschrieben.
|
9176
|
6120/13
|
POWER BCU BUSCH-PRION
|
SYSTEM DEVICES
|
|
|
9253 |
6149/21 |
Commissioning interface / adapter |
SYSTEM DEVICES |
|
|
for Busch-Installationsbus® KNX Buscoupler 6120 / 12, 6120 / 13 und Busch-Powernet®KNX Network coupling 6920 / 12, 6920 / 13. Local commissioning via USB connection and SD card slot. Data on SD card selected using 4 push buttons and 3-line backlit display. With integrated battery for autonomous operation for up to 8h. Battery is charged by the PC via USB cable.
Control Covers: 4 push buttons for operation Display elements: Multiline back-lit display
Temperature range (Device): -5 °C - 45 °C
|
9253
|
6149/21
|
COMMISSIONING INTERFACE / ADAPTER
|
SYSTEM DEVICES
|
|
|
9364 |
6730-84 |
WaveLINE LED display |
VISUALIZATION |
|
|
For status display of window handle positions: open = red, closed = green, tilted = yellow. Direct onsite operation possible for switching / dimming an electrical device depending on the flush mounted insert. 4 individual LED display channels. Up to 8 WaveLine transmitters can be taught-in on each LED display channel. Up to 8 WaveLine transmitters can be taught-in on onsite operation. After a power cut all LED display channels light in red. The cyclic telegram repeat of the WaveLINE window position sensor 6720-xxx sensor automatically updates the window open state. Status display for depleted WaveLINE transmitter battery. Status display for faulty transmission link and defective WaveLINE transmitter. User-friendly start-up without PC / software. Printed labelling sheet with 8 different inlay sheets. For WaveLINE window position sensor 6720-xxx. For WaveLINE 6721-xx universal signalling unit. For Busch Watchdog 220 WaveLINE 6745 AGM. For Busch-Universal relay switch insert 6404 U. For universal dimmer switch insert 6595 U. For ABB i-bus® KNX devices 6110 U, 6114 U, 6120 U-102. Range in free field: approx.100 m Send / receive frequency: 868 MHz.
Protection class (Device): IP 20 Temperature range (Device): -5 °C - 45 °C
Dimensions: (L x W x D): 63 mm x 63 mm x |
9364
|
6730-84
|
WAVELINE LED DISPLAY
|
VISUALIZATION
|
|
|
9376 |
6730-24G |
WaveLINE LED display |
SIN FAMILIA |
|
|
For status display of window handle positions: open = red, closed = green, tilted = yellow. Direct onsite operation possible for switching / dimming an electrical device depending on the flush mounted insert. 4 individual LED display channels. Up to 8 WaveLine transmitters can be taught-in on each LED display channel. Up to 8 WaveLine transmitters can be taught-in on onsite operation. After a power cut all LED display channels light in red. The cyclic telegram repeat of the WaveLINE window position sensor 6720-xxx sensor automatically updates the window open state. Status display for depleted WaveLINE transmitter battery. Status display for faulty transmission link and defective WaveLINE transmitter. User-friendly start-up without PC / software. Printed labelling sheet with 8 different inlay sheets. For WaveLINE window position sensor 6720-xxx. For WaveLINE 6721-xx universal signalling unit. For Busch Watchdog 220 WaveLINE 6745 AGM. For Busch-Universal relay switch insert 6404 U. For universal dimmer switch insert 6595 U. For ABB i-bus® KNX devices 6110 U, 6114 U, 6120 U-102. Range in free field: approx.100 m Send / receive frequency: 868 MHz.
Protection class (Device): IP 20 Temperature range (Device): -5 °C - 45 °C
Dimensions: (L x W x D): 63 mm x 63 mm x |
9376
|
6730-24G
|
WAVELINE LED DISPLAY
|
SIN FAMILIA
|
|
|
9941 |
6190/49-101 |
Filament transformer 2-channels |
SYSTEM DEVICES |
|
|
For wind and/or rain sensor 6190/41and 6190/43. Output: 24 V~, max. 1A SELV Also suitable for supplying up to 5 thermoelectric valve drives 24 V 6164/11, . For power supply to weather station 6190/40-101. Rated voltage: 230 V~, +10% / -15% Secondary: 24 V~ Rated frequency: 50 Hz - 60 Hz Outputs: 2 Secondary outputs, 24 V~ Rated current: 500 mA Protection class (Device): IP 20 Temperature range (Device): -5 °C - 40 °C Dimensions: (L x W x D): 90 mm x 70 mm x 58 mm module width: 4 MW
|
9941
|
6190/49-101
|
FILAMENT TRANSFORMER 2-CHANNELS
|
SYSTEM DEVICES
|
|
|
10133 |
6138/11-84 |
Ambient temperature controller, fan coil with display, SM
With integrated bus coupler
|
SIN FAMILIA |
|
|
Control element for ambient temperature control with LCD and 5 operating buttons Used for single-room temperature control in heating and air-conditioning technology. The controller is a constant ambient temperature controller for fan convectors (fan coils) in 2-pipe and 4-pipe systems and conventional heating or cooling systems. The ambient temperature controller works in both heating and cooling mode. The fan stage can be switched manually or in automatic mode.
Control element: Push-switch for turning the device on and off Push-switch for selecting the fan stages Push-switch for changing the setpoint temperatures Push-switch for switching the temperature unit between Celsius and Fahrenheit Display elements: LCD for displaying temperatures, operating modes, fan stages, and fault messages
Connections: KNX-line: DP screw/clamp terminals
Protection class (Device): IP 20 Temperature range (Device): -5 °C - 45 °C
Dimensions: (L x W x D): 81 mm x 81 mm x 20 mm |
10133
|
6138/11-84
|
AMBIENT TEMPERATURE CONTROLLER, FAN COIL WITH DISPLAY, SM
WITH INTEGRATED BUS COUPLER
|
SIN FAMILIA
|
|
|
10142 |
6193/32-101 |
System technology / ABB i-bus® EIB/KNX for busch-jaeger / Universal input/output 32 inputs/outputs
|
INPUTS |
|
|
System technology / ABB i-bus® EIB/KNX for busch-jaeger / Universal input/output 32 inputs/outputs
EIB Universal input/output, 32gang
Rail-mounting
For installation bus EIB
For transmitting switching, push-button, value, dimming and blind commands to an EIB actuator.
For switching LEDs with series resistance or incandescent lamps up to 80 mA
Sensor for connecting external, potential free 24 V contacts.
Inputs and outputs can be freely parameterised.
The device requires an additional voltage supply
The following applications are provided for the inputs and outputs:
Inputs: Switching, Dimming, Blind, Flank, Value, Cyclical
Outputs: Flashing frequency, Inverting, Initial value
Connections:
Power supply: Multi-point connector with screw terminals, 0.14 - 1.0 mm²
Inputs: Multi-point connector with screw terminals, 0.14 - 1.0 mm²
Outputs: Multi-point connector with screw terminals, 0.14 - 1.0 mm²
EIB-line: Bus terminal
Dimensions: (L x W x D): 90 mm x 72 mm x 64 mm
module width: 4 TE
Design: per M-Design
Inputs: 32
max. length of sensor line: 10 m
optional power supply: 10 - 30 V-
Outputs: Control/Signal outputs: 32, electronic output, potential-bound
Rated current: 80 mA
Physical properties:
Protection class (Device): IP 20
Temperature range (Device): -5 °C - 45 °C
Manufacturer: Busch-Jaeger Elektro GmbH
Article Number: 6193/32
Deliver and assemble ready for operation,
or equivalent.
Product offered:
Type:
|
10142
|
6193/32-101
|
SYSTEM TECHNOLOGY / ABB I-BUS® EIB/KNX FOR BUSCH-JAEGER / UNIVERSAL INPUT/OUTPUT 32 INPUTS/OUTPUTS
|
INPUTS
|
|
|
10232 |
6122/02-83 |
Busch-Watchdog 180 flush mounted comfort sensor II Multi-lens, aluminium |
DETECTORS |
|
For ABB i-bus® KNX 6120/12, 6120/13 and Busch Powernet® KNX 6920/12, 6920/13 und 6920/40. Movement sensor with up to four channels.
Control element: Sliding switch for manual operation ON/AUTOMATIC/OFF (lockable)
Protection class (Device): IP 20 Temperature range (Device): -5 °C - 45 °C Detection range: frontal: 15 m lateral: 5 m Detection range 2: frontal: 10 m lateral: 2.5 m Brightness limit value: 5 Lux - 150 Lux Detection angle: 180 °
Dimensions: (L x W x D): 63 mm x 63 mm x 28 mm Position for installation: vertical Mounting height: - 1.1 m - 2.5 m |
10232
|
6122/02-83
|
BUSCH-WATCHDOG 180 FLUSH MOUNTED COMFORT SENSOR II MULTI-LENS, ALUMINIUM
|
DETECTORS
|
|
|
10233 |
6120/12-101 |
Flush-mounted bus coupler |
SYSTEM DEVICES |
|
|
For Busch-priOn® 1-fold support frame 6346/10-10x and control elements 6122/0x-xxx, 6124/0x-xxx, 6125/0x-xxx, 6126/0x-xxx, 6127/0x-xxx, 6128/0x-xxx, 6129/0x-xxx. The bus connection is effected via the enclosed bus terminal.
Connections: KNX-line: Bus terminal
Rated voltage: 24 V
Rated current: 5 mA
Protection class (Device): IP 20 Temperature range (Device): -5 °C - 45 °C
Dimensions: (L x W x D): 50 mm x 45 mm x 23 mm |
10233
|
6120/12-101
|
FLUSH-MOUNTED BUS COUPLER
|
SYSTEM DEVICES
|
|
|
11540 |
6122/02-81 |
Busch-Watchdog 180 flush mounted comfort sensor II Multi-lens, anthracite |
DETECTORS |
|
For ABB i-bus® KNX 6120/12, 6120/13 and Busch Powernet® KNX 6920/12, 6920/13 und 6920/40. Movement sensor with up to four channels.
Control element: Sliding switch for manual operation ON/AUTOMATIC/OFF (lockable)
Protection class (Device): IP 20 Temperature range (Device): -5 °C - 45 °C Detection range: frontal: 15 m lateral: 5 m Detection range 2: frontal: 10 m lateral: 2.5 m Brightness limit value: 5 Lux - 150 Lux Detection angle: 180 °
Dimensions: (L x W x D): 63 mm x 63 mm x 28 mm Position for installation: vertical Mounting height: - 1.1 m - 2.5 m |
11540
|
6122/02-81
|
BUSCH-WATCHDOG 180 FLUSH MOUNTED COMFORT SENSOR II MULTI-LENS, ANTHRACITE
|
DETECTORS
|
|
|
13416 |
6195/32 |
Switch actuator 12-ch, 6A |
ACTUATORS - OUTPUTS |
|
|
Switch actuator for bus system 12-ch Bus system KNX, Mounting method DRA, Width in number of modular spacings 6, Max. switching current 6A, Max. switching power 1200W, Max. number of switching contacts 12, Bus connection included, Degree of protection (IP) IP20, |
13416
|
6195/32
|
SWITCH ACTUATOR 12-CH, 6A
|
ACTUATORS - OUTPUTS
|
|
|
16645 |
6136/15 |
/Controlpanel. 6136/13 |
VISUALIZATION |
|
Design styling frame of real material for 6136/100C-xxx, 6136/100CB-xxx, 6936/100C-xxx, 6936/100CB-xxx.
Materials: white glass with aluminium flap.
Dimensions: (L x W x D): 184.6 mm x 218 mm x 9 mm |
16645
|
6136/15
|
/CONTROLPANEL. 6136/13
|
VISUALIZATION
|
|
|
10724 |
6320/30-24G |
Control element 3/6, MF/IR, BUSCH-TRITON® |
PUSH BUTTONS |
|
|
With integrated KNX bus coupler. With labelling field. rocker switch left/right (switching/dimming/blind/value sender/light scenes/fan function) Control element with room thermostat function for triggering the heating, ventilation and fan-coil actuators. |
10724
|
6320/30-24G
|
CONTROL ELEMENT 3/6, MF/IR, BUSCH-TRITON®
|
PUSH BUTTONS
|
|
|
10725 |
6320/50-24G |
Control element, 5/10-gang, with infrared interface, Busch-triton ® |
PUSH BUTTONS |
|
Product: 6320/50-500 Busch-triton®
Control element 5/10gang, MF/IR
With integrated KNX bus coupler. With labelling field. rocker switch left/right (switching/dimming/blind/value sender/light scenes/fan function) To control up to 13 IR channels (RC5) using Busch-Remote control IR mobile remote control 6010-25 or 6020-.../ |
10725
|
6320/50-24G
|
CONTROL ELEMENT, 5/10-GANG, WITH INFRARED INTERFACE, BUSCH-TRITON ®
|
PUSH BUTTONS
|
|
|
11132 |
6345-24G-101 |
Motion detector prion |
DETECTORS |
|
|
Movement sensor with up to four channels. For installation in the 1gang, 2gang and 3gang support frame (6346/10-101, 6346/11-101 and 6346/12-101) Incl. 10 logic channels (light scene actuator, sequence actuator, logic gates, etc.) |
11132
|
6345-24G-101
|
MOTION DETECTOR PRION
|
DETECTORS
|
|
|
11136 |
6128/01-81 |
Touch sensor with 2/4gang with thermostat |
PUSH BUTTONS |
|
|
With labelling field. For ABB i-bus(R) KNX bus coupler 6120/12, 6120/13. Support of KNX functions through innovative colour concept yellow=lighting, blue=blind, orange=RTC, magenta=scene and white=neutral/no function assigned) or standard illumination red |
11136
|
6128/01-81
|
TOUCH SENSOR WITH 2/4GANG WITH THERMOSTAT
|
PUSH BUTTONS
|
|
|
11491 |
20 EUCKS-81 |
Schuko ® socket outlet with integrated shutter |
SYSTEM DEVICES |
|
|
Schuko ® socket outlet with integrated shutter With screwless terminals.
DP (2 P + E)
Rated voltage: 250 V~
Rated current: 16 A
Connecting terminals approved in accordance with VDE 0620-1 as connectors.
Increased shock protection . |
11491
|
20 EUCKS-81
|
SCHUKO ® SOCKET OUTLET WITH INTEGRATED SHUTTER
|
SYSTEM DEVICES
|
|
|
11506 |
6127/01-83 |
ouch sensor, 4-gang with bus coupler, aluminium silver, |
PUSH BUTTONS |
|
|
With labelling field. Transparent labelling sheet with standard symbols included in delivery. Control element: rocker switch left/right Display elements: Two LED per rocker via separate communication object for status (Red/ Green/ OFF) or orientation light Protection class (Device): IP 20 Temperature range (Device): -5 °C to 45 °C Dimensions: (L x W x D): 63 mm x 63 mm |
11506
|
6127/01-83
|
OUCH SENSOR, 4-GANG WITH BUS COUPLER, ALUMINIUM SILVER,
|
PUSH BUTTONS
|
|
|
11552 |
6125/01-81 |
Touch sensor, 1gang |
PUSH BUTTONS |
|
|
For ABB i-bus(R) KNX With labelling field. Transparent labelling sheet with standard symbols included in delivery. |
11552
|
6125/01-81
|
TOUCH SENSOR, 1GANG
|
PUSH BUTTONS
|
|
|
11561 |
6127/01-81 |
ouch sensor, 4-gang with bus coupler, aluminium silver, |
PUSH BUTTONS |
|
|
With labelling field. Transparent labelling sheet with standard symbols included in delivery. Control element: rocker switch left/right Display elements: Two LED per rocker via separate communication object for status (Red/ Green/ OFF) or orientation light Protection class (Device): IP 20 Temperature range (Device): -5 °C to 45 °C Dimensions: (L x W x D): 63 mm x 63 mm |
11561
|
6127/01-81
|
OUCH SENSOR, 4-GANG WITH BUS COUPLER, ALUMINIUM SILVER,
|
PUSH BUTTONS
|
|
|
11569 |
6127/02-81 |
Touch sensor 4/8gang, multifunction |
PUSH BUTTONS |
|
|
For ABB i-bus(R) KNX 6120/12-101, 6120/13. With labelling field. Support of KNX functions through innovative colour concept yellow=lighting, blue=blind, orange=RTC, magenta=scene and white=neutral/no function assigned) or standard illumination red/green. |
11569
|
6127/02-81
|
TOUCH SENSOR 4/8GANG, MULTIFUNCTION
|
PUSH BUTTONS
|
|
|
11578 |
6126/01-81 |
Touch sensor, 2/gang with bus coupler |
PUSH BUTTONS |
|
|
For ABB i-bus(R) KNX With labelling field. Transparent labelling sheet with standard symbols included in delivery. |
11578
|
6126/01-81
|
TOUCH SENSOR, 2/GANG WITH BUS COUPLER
|
PUSH BUTTONS
|
|
|
11588 |
6126/02-81 |
Touch sensor 2/4gang, multifunction |
PUSH BUTTONS |
|
|
For ABB i-bus(R) KNX 6120/12-101, 6120/13. With labelling field. Support of KNX functions through innovative colour concept yellow=lighting, blue=blind, orange=RTC, magenta=scene and white=neutral/no function assigned) or standard illumination red/green. |
11588
|
6126/02-81
|
TOUCH SENSOR 2/4GANG, MULTIFUNCTION
|
PUSH BUTTONS
|
|
|
11595 |
6126/02-803 |
Touch sensor 2/4gang, multifunction |
PUSH BUTTONS |
|
|
For ABB i-bus(R) KNX 6120/12-101, 6120/13. With labelling field. Support of KNX functions through innovative colour concept yellow=lighting, blue=blind, orange=RTC, magenta=scene and white=neutral/no function assigned) or standard illumination red/green. |
11595
|
6126/02-803
|
TOUCH SENSOR 2/4GANG, MULTIFUNCTION
|
PUSH BUTTONS
|
|
|
11971 |
6122/02-866 |
Busch-Watchdog 180 flush-mounted comfort sensor II, stainless steel |
DETECTORS |
|
For ABB i-bus® KNX 6120/12-101, 6120/13.
Movement sensor with up to four channels.
Incl. 10 logic channels (light scene actuator, sequence actuator, logic gates, etc.)
Control element: Sliding switch for manual operation ON/AUTOMATIC/OFF (lockable)
Protection class (Device): IP 20
Temperature range (Device): -5 °C - 45 °C
Detection range: frontal: 15 m lateral: 5 m
Detection range 2: frontal: 10 m lateral: 2.5 m
Brightness limit value: 5 Lux - Up to daytime operation
Detection angle: 180 °
Dimensions: (L x W x D): 63 mm x 63 mm x 28 mm
Position for installation: vertical
Mounting height: - 0.8 m - 1.2 m, alternative: 2.5 m
For software and description please check the current e-catalogue.
For compatible cover frames, see the following ranges: carat®, pure stainless steel, solo®, Busch-axcent® or future® linear.
ETS programming only with ETS 3.0f or higher
Additional Power-Tool software necessary.
|
11971
|
6122/02-866
|
BUSCH-WATCHDOG 180 FLUSH-MOUNTED COMFORT SENSOR II, STAINLESS STEEL
|
DETECTORS
|
|
|
11987 |
6125/01-896 |
Touch sensor, 1/-fold with bus couple, stainless steel,IP 20 |
PUSH BUTTONS |
|
For ABB i-bus® KNX
With labelling field.
Transparent labelling sheet with standard symbols included in delivery.
Control element: rocker switch left/right
Display elements: Two LED per rocker via separate communication object for status (Red/ Green/ OFF) or orientation light
Protection class (Device): IP 20
Temperature range (Device): -5 °C - 45 °C |
11987
|
6125/01-896
|
TOUCH SENSOR, 1/-FOLD WITH BUS COUPLE, STAINLESS STEEL,IP 20
|
PUSH BUTTONS
|
|
|
12014 |
6129/01-803 |
Touch sensor 3/6gang with infrared |
PUSH BUTTONS |
|
|
For ABB i-bus(R) KNX 6120/12-101, 6120/13. With labelling field. Support of KNX functions through innovative colour concept yellow=lighting, blue=blind, orange=RTC, magenta=scene and white=neutral/no function assigned) or standard illumination red/green. |
12014
|
6129/01-803
|
TOUCH SENSOR 3/6GANG WITH INFRARED
|
PUSH BUTTONS
|
|
|
12027 |
6320/10-24G |
Control element, 1/2-gang, MF/IR, with infrared interface Busch-triton ® |
PUSH BUTTONS |
|
With integrated KNX bus coupler.
With labelling field.
Transparent labelling sheet with standard symbols included in delivery.
rocker switch left/right (switching/dimming/blind/value sender/light scenes/fan function)
To control up to 13 IR channels (RC5) using Busch-Remote control IR mobile remote control 6010-25 or 6020- ... /6021 ... .
Control element: rocker switch left/right
Display elements: Two LED per rocker via separate communication object for status (Red/ Green/ OFF) or orientation light
Connections:
KNX-line: Bus terminal
Protection class (Device): IP 20
Temperature range (Device): -5 °C - 45 °C
Dimensions: (L x W x D): 84 mm x 90 mm x
As required, you can find the programmable functions in the current application description, which you can download in the Support Centre on our Internet page.
See labelling sheet 1799/0x.
|
12027
|
6320/10-24G
|
CONTROL ELEMENT, 1/2-GANG, MF/IR, WITH INFRARED INTERFACE BUSCH-TRITON ®
|
PUSH BUTTONS
|
|
|
12036 |
6125/02-803 |
Control element, 1/2gang Flush-mounted sensors |
PUSH BUTTONS |
|
For ABB i-bus® KNX 6120/12-101, 6120/13.
With labelling field.
Support of KNX functions through innovative colour concept yellow=lighting, blue=blind, orange=RTC, magenta=scene and white=neutral/no function assigned) or standard illumination red/green.
Push switch function: switching / dimming / blind / sending values / scenes etc.
Transparent labelling sheet with standard symbols included in delivery.
Incl. 10 logic channels (light scene actuator, sequence actuator, logic gates, etc.)
Control element: rocker switch left/right
Display elements: Two LED per rocker via separate communication object for status (Red/ Green/ OFF) or orientation light
Protection class (Device): IP 20
Temperature range (Device): -5 °C - 45 °C
Dimensions: (L x W x D): 63 mm x 63 mm x
For software and description please check the current e-catalogue.
ETS programming only with ETS 3.0f or higher
See labelling sheet 1799/0x.
Additional Power-Tool software necessary.
Surface painted. |
12036
|
6125/02-803
|
CONTROL ELEMENT, 1/2GANG FLUSH-MOUNTED SENSORS
|
PUSH BUTTONS
|
|
|
12037 |
6125/02-81 |
Control element, 1/2gang Flush-mounted sensors |
PUSH BUTTONS |
|
For ABB i-bus® KNX 6120/12-101, 6120/13.
With labelling field.
Support of KNX functions through innovative colour concept yellow=lighting, blue=blind, orange=RTC, magenta=scene and white=neutral/no function assigned) or standard illumination red/green.
Push switch function: switching / dimming / blind / sending values / scenes etc.
Transparent labelling sheet with standard symbols included in delivery.
Incl. 10 logic channels (light scene actuator, sequence actuator, logic gates, etc.)
Control element: rocker switch left/right
Display elements: Two LED per rocker via separate communication object for status (Red/ Green/ OFF) or orientation light
Protection class (Device): IP 20
Temperature range (Device): -5 °C - 45 °C
Dimensions: (L x W x D): 63 mm x 63 mm x
For software and description please check the current e-catalogue.
ETS programming only with ETS 3.0f or higher
See labelling sheet 1799/0x.
Additional Power-Tool software necessary.
Surface painted. |
12037
|
6125/02-81
|
CONTROL ELEMENT, 1/2GANG FLUSH-MOUNTED SENSORS
|
PUSH BUTTONS
|
|
|
12055 |
6151/11 U |
Switch actuator, 1gang, 16 A, 2 inputs |
ACTUATORS - OUTPUTS |
|
For switching 230 V~ consumers.
The bus can be connected via enclosed terminal block.
Connections:
KNX-line: Bus terminal
Rated voltage: 230 V~, +10% / -10%
Rated frequency: 50 Hz - 60 Hz
Inputs: 2
Polling voltage: 5 V
Outputs: 1 Normally open contact, potential free
Suitable for: AC1
Rated current: 16 A, cos f1
Output voltage: 230 V~
Rated power: 2200 W
Suitable for: AC3
Rated current: 10 A, cos f0.6
Output voltage: 230 V~
Protection class (Device): IP 20
Temperature range (Device): -5 °C - 45 °C
Dimensions: (L x W x D): 53 mm x 53 mm x 28 mm |
12055
|
6151/11 U
|
SWITCH ACTUATOR, 1GANG, 16 A, 2 INPUTS
|
ACTUATORS - OUTPUTS
|
|
|
12056 |
6152/11 U |
Shutter Actuator 1 gang, 3 inputs |
ACTUATORS - OUTPUTS |
|
For controlling blind or awning motors.
The bus can be connected via enclosed terminal block.
Connections:
KNX-line: Bus terminal
Rated voltage: 230 V~, +10% / -10%
Rated frequency: 50 Hz - 60 Hz
Inputs: 3
Polling voltage: 5 V
Outputs: 1 Change-over contacts/normally open contact, potential-bound
Suitable for: Operation mode Blind
Rated current: 3 A, cos f0.8
Output voltage: 250 V~
Protection class (Device): IP 20
Temperature range (Device): -5 °C - 45 °C
Dimensions: (L x W x D): 53 mm x 53 mm x 28 mm |
12056
|
6152/11 U
|
SHUTTER ACTUATOR 1 GANG, 3 INPUTS
|
ACTUATORS - OUTPUTS
|
|
|
12057 |
6164/11 U |
Heating actuator 1 fold UP, 3 inputs. |
CLIMATE CONTROL |
|
Ein elektronischer Ausgang (geräuschlos)
Zum Anschluss der thermoelektrischen Stellantriebe 6164/10-101.
Der Busanschluss erfolgt über die beiliegende Busklemme.
Anschlüsse:
KNX-Linie: Busanschlussklemme
Nennspannung: 230 V~, +10% / -10%
Nennfrequenz: 50 Hz - 60 Hz
Eingänge: 3
Abfragespannung: 5 V
Ausgänge: 1 elektronischer Ausgang, potenzialgebunden, 230 V~
Lastart: Betriebsart Schalten
Nennstrom: 25 mA, cos f1
Ausgangsspannung: 250 V~
Schutzart Gerät: IP 20
Temperaturbereich Gerät: -5 °C - 45 °C |
12057
|
6164/11 U
|
HEATING ACTUATOR 1 FOLD UP, 3 INPUTS.
|
CLIMATE CONTROL
|
|
|
12059 |
6164/40-101 |
Electronic switch actuator, 4-fold MDRC |
CLIMATE CONTROL |
|
|
4 electronic outputs (noiseless) For connecting max. 4 thermoelectric positioners 6164/10 or 6161/11 per channel with manual control. The bus connection is effected via the enclosed bus terminal. |
12059
|
6164/40-101
|
ELECTRONIC SWITCH ACTUATOR, 4-FOLD MDRC
|
CLIMATE CONTROL
|
|
|
12077 |
6164/44 |
Electronic switch actuator, 8-fold, 1A MDRC |
CLIMATE CONTROL |
|
For controlling thermoelectric and motor-driven valve drives in heating/cooling systems and for noiseless switching of loads at 24...230 V AC/DC. The 8 semicondcutor outputs are protected against short circuits and overload.With manual operation. |
12077
|
6164/44
|
ELECTRONIC SWITCH ACTUATOR, 8-FOLD, 1A MDRC
|
CLIMATE CONTROL
|
|
|
12078 |
6164/45 |
Actuador fancoil/ventilador, 6 canales |
CLIMATE CONTROL |
|
Zum Steuern von thermoelektrischen Stellantrieben in Heiz-/Kühlsystemen bei 24 ... 230 V AC.
Die Ausgänge sind kurzschluss- und überlastsicher und können über die manuelle Bedienung bei der Inbetriebnahme gesteuert werden.
Anschlüsse:
KNX-Linie: Busanschlussklemme
Ausgänge: 6 Halbleiterausgänge 24 V~ - 230 V~
Schutzart Gerät: IP 20
Temperaturbereich Gerät: -5 °C - 45 °C
Maße (H x B x T): 90 mm x 72 mm x 64 mm
Einbautiefe: 68 mm
Teilungseinheit: 4 TE
Bei Bedarf entnehmen Sie bitte Software und Beschreibung dem aktuellen E-Katalog.
1 TE ? 18 mm. |
12078
|
6164/45
|
ACTUADOR FANCOIL/VENTILADOR, 6 CANALES
|
CLIMATE CONTROL
|
|
|
12079 |
6164/46 |
Actuador fancoil/ventilador, 12 canales |
CLIMATE CONTROL |
|
Zum Steuern von thermoelektrischen Stellantrieben in Heiz-/Kühlsystemen bei 24 ... 230 V AC.
Die Ausgänge sind kurzschluss- und überlastsicher und können über die manuelle Bedienung bei der Inbetriebnahme gesteuert werden.
Anschlüsse:
KNX-Linie: Busanschlussklemme
Ausgänge: 12 Halbleiterausgänge 24 V~ - 230 V~
Schutzart Gerät: IP 20
Temperaturbereich Gerät: -5 °C - 45 °C
Maße (H x B x T): 90 mm x 144 mm x 64 mm
Einbautiefe: 68 mm
Teilungseinheit: 8 TE
Bei Bedarf entnehmen Sie bitte Software und Beschreibung dem aktuellen E-Katalog.
1 TE ? 18 mm.
|
12079
|
6164/46
|
ACTUADOR FANCOIL/VENTILADOR, 12 CANALES
|
CLIMATE CONTROL
|
|
|
12080 |
6173/11 U |
Combi actuator with binary 2 fold, 3 Inputs |
ACTUATORS - OUTPUTS |
|
|
Combi actuator with binary 2 fold, 3 Inputs |
12080
|
6173/11 U
|
COMBI ACTUATOR WITH BINARY 2 FOLD, 3 INPUTS
|
ACTUATORS - OUTPUTS
|
|
|
12277 |
6187-104 |
Line coupler |
SYSTEM DEVICES |
|
Zur Kopplung von Linie/Hauptlinie oder Hauptlinie und Bereichslinie, auch als Linienverstärker einsetzbar.
Kontaktierung über EIB-Busanschlussklemme.
Anzeigeelemente: LEDs: Spannungsüberwachung, Telegrammverkehr
Anschlüsse:
übergeordnete Linie: Busanschlussklemme
untergeordnete Linie: Busanschlussklemme
Nennspannung: 29 V |
12277
|
6187-104
|
LINE COUPLER
|
SYSTEM DEVICES
|
|
|
12608 |
6197/13-101 |
Universal dimming actuator 4 x 315 W/VA up to 1 x 1260 W/VA |
ACTUATORS - OUTPUTS |
|
|
Multichannel universal dimming actuator for controlling incandescent lamps, 230 V incandescent halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable energy-saving halogen lamps. Optimized for dimming of Philip |
12608
|
6197/13-101
|
UNIVERSAL DIMMING ACTUATOR 4 X 315 W/VA UP TO 1 X 1260 W/VA
|
ACTUATORS - OUTPUTS
|
|
|
13373 |
8136/12-811 |
Busch-ComfortPanel® 12.1", House control, Infotainment, Entertainment |
VISUALIZATION |
|
Free programmable IP/KNX touch display can be used as a control, infotainment and entertainment centre for the whole house
With a closed capacitative glass surface and a design strip made of stainless steel (brushed).
With integrated camera.
Easy control using intuitive navigation concept.
House control: switching, dimming, blinds, RTC, scene/sequences, timed controls
Entertainment: Multimedia, remote control RC5 and B&O.
Infotainment: IP telephony, RSS reader, intercom with picture, e-mail, voice and graphic memo, consumption data monitoring.
Door communication: Indoor station for the ABB-Welcome system in combination with IP gateway 83341.
Safety: video surveillance with IP cameras, alarm function, message function, presence simulation.
Representation from individual floor plans, room images and operation pages.
31 cm (12.1") touchdisplay with 1280 x 800 pixel.
Compatible with ABB i-bus® KNX
Maintenance via remote control over IP.
Control with smartphones and tablets via the ComfortTouch App (Apple iOS /Google Android from Version 4).
Control element: freely programmable touch surfaces
Display elements: Capacitive touchdisplay 800 x 1280 pixel
Protection class (Device): IP 20
Temperature range (Device): 0 °C to 45 °C |
13373
|
8136/12-811
|
BUSCH-COMFORTPANEL® 12.1", HOUSE CONTROL, INFOTAINMENT, ENTERTAINMENT
|
VISUALIZATION
|
|
|
13377 |
6936/100CB-102 |
Controlpanel BANG & OLUFSEN, color |
VISUALIZATION |
|
Freiprogrammierbares KNX-Touch-Display als raumübergreifende Steuer-, Melde-, und Kontrolleinheit.
Kombinierbar mit verschiedenen Designrahmen aus Echtmaterial.
Das Gerät kann über den BANG & OLUFSEN Handsender BEO 4 fernbedient werden.
Zur Darstellung und zur Bedienung von bis zu 210 KNX-Standardfunktionen (schalten, dimmen, Jalousie steuern, Messwerte anzeigen etc.), mit Lichtszenenfunktion, Makrorekorder , Anwesenheitssimulation und Zeitprogrammen.
Seitendarstellung mit 8 Symbolen, 10 oder 5 Touchflächen.
Mit speziell vorkonfigurierten Medienseiten für die Ansteuerung von Multimediageräten (in Verbindung mit Zusatzgerät) über das KNX-System.
Mit freier Menüstruktur.
Frei beschriftbare Touch-Flächen mit benutzerdefinierten Symbolen.
Aufruf der Funktionen über Touch-Fläche direkt oder über Pop-Up-Menue.
Als Meldezentrale mit akustischer Rückkopplung einsetzbar.
Integrierter Einzelraumtemperaturregler und IR Empfang.
Bedienelemente: frei programmierbare Touchflächen
Anzeigeelemente: TFT-Touch-Display 320 x 240 Bildpunkte
Anschlüsse:
KNX-Linie: Schraub-/Steckklemme bis 1, 5 mm²
Nennspannung: 230 V~
Nennfrequenz: 50 Hz
Nennleistung: 12 W |
13377
|
6936/100CB-102
|
CONTROLPANEL BANG & OLUFSEN, COLOR
|
VISUALIZATION
|
|
|
13405 |
6193/10 |
Room Master, Basic, REG |
ACTUATORS - OUTPUTS |
|
Zusätzlich stehen vier Jalousieausgänge zur Verfügung, die auch als Schaltausgänge programmiert werden können. Die einzelnen Jalousieausgänge sind als Wechselkontakte gegeneinander hardwareseitig verriegelt.
Weiterhin stehen zwölf potentialfreie Binäreingänge zur Verfügung, über die jeweils die Ausgänge (Schalten und Jalousie) bedient werden können.
Die Binäreingänge können als reine KNX-Teilnehmer programmiert werden.
Anschlüsse:
KNX-Linie: Busanschlussklemme
Nennspannung: 230 V~, +10% / -15%
Nennfrequenz: 50 Hz - 60 Hz
Eingänge: 12
Abfragespannung: 32 V, Kontaktabfrage
Ausgänge: 4 Schließer, potenzialfrei
Lastart: AC1
Nennstrom: 20 AX
Schutzart Gerät: IP 20
Temperaturbereich Gerät: -5 °C bis 45 °C
Maße (H x B x T): 90 mm x 216 mm x 64 mm
Einbautiefe: 68 mm
Teilungseinheit: 12 TE |
13405
|
6193/10
|
ROOM MASTER, BASIC, REG
|
ACTUATORS - OUTPUTS
|
|
|
13406 |
6196/20-102 |
Shutter actuator, 2 channels, 6A |
ACTUATORS - OUTPUTS |
|
230 V~, 50 Hz, 2 x 6 A
Zum Steuern von 2 unabhängigen Jalousiegruppen.
Anschlüsse:
KNX-Linie: Busanschlussklemme
Nennspannung: 230 V~, +10% / -15%
Nennfrequenz: 50 Hz - 60 Hz
Ausgänge: 2 Umschalter
Lastart: AC1/AC3
Nennstrom: 6 A
Schutzart Gerät: IP 20
Temperaturbereich Gerät: -5 °C bis 45 °C
Maße (H x B x T): 90 mm x 72 mm x 64 mm
Einbautiefe: 68 mm
Teilungseinheit: 4 TE
Auch als Binärausgang nutzbar (pro Ausgang ein Kanal).
|
13406
|
6196/20-102
|
SHUTTER ACTUATOR, 2 CHANNELS, 6A
|
ACTUATORS - OUTPUTS
|
|
|
13411 |
6194/18 |
Binary output, 16 AX with current detection, 12x |
ACTUATORS - OUTPUTS |
|
12-fach Schaltaktor.
Potenzialfreie Kontakte als Öffner oder Schließer parametrierbar.
Manuelle "Vor-Ort-Betätigung" möglich.
Schaltzustandsanzeige der Kontakte
Mit integrierter Stromerkennung und ohne separate Versorgungsspannung.
Der Busanschluss erfolgt über die beiliegende Busklemme.
auch zum Schalten von kapazitiven Lasten bis 200 µF (z. B. EVG)
Bedienelemente: Manuelle Betätigungsmöglichkeit für EIN/AUS über Schiebeschalter
Anzeigeelemente: Statusanzeige der Ausgänge über Position der Schiebeschalter
Anschlüsse:
KNX-Linie: Busanschlussklemme
Nennspannung: 230 V~, +10% / -15%
Nennfrequenz: 50 Hz - 60 Hz
Ausgänge: 12 Schließer, potenzialfrei
Lastart: AC1
Nennstrom: 16 A, cos f1
Ausgangsspannung: 230 V~
Lastart: AC3
Nennstrom: 16 A
Ausgangsspannung: 230 V~
Schutzart Gerät: IP 20
Temperaturbereich Gerät: -5 °C bis 45 °C
Maße (H x B x T): 90 mm x 216 mm x 64 mm
Einbautiefe: 68 mm
Teilungseinheit: 12 TE
Bei Bedarf entnehmen Sie bitte Software und Beschreibung dem aktuellen E-Katalog.
1 TE ? 18 mm.
|
13411
|
6194/18
|
BINARY OUTPUT, 16 AX WITH CURRENT DETECTION, 12X
|
ACTUATORS - OUTPUTS
|
|
|
13415 |
6195/31 |
Switch actuator 8-ch, 6A |
ACTUATORS - OUTPUTS |
|
|
Switch actuator for bus system 8-ch Bus system KNX, Mounting method DRA, Width in number of modular spacings 4, Max. switching current 6A, Max. switching power 1200W, Max. number of switching contacts 8, Bus connection included, Degree of protection (IP) IP20, |
13415
|
6195/31
|
SWITCH ACTUATOR 8-CH, 6A
|
ACTUATORS - OUTPUTS
|
|
|
13425 |
6195/35 |
Binary Output, 10 A, 2-fold, 10A |
ACTUATORS - OUTPUTS |
|
2-fach Schaltaktor
Potenzialfreie Kontakte als Öffner oder Schließer parametrierbar.
Schaltzustandsanzeige der Kontakte
Auch zum Schalten von kapazitiven Lasten bis 140 µF.
Der Busanschluss erfolgt über die beiliegende Busklemme.
Bedienelemente: Manuelle Betätigungsmöglichkeit für EIN/AUS über Schiebeschalter
Anschlüsse:
KNX-Linie: Busanschlussklemme
Nennspannung: 230 V~, +10% / -15%
Nennfrequenz: 50 Hz - 60 Hz
Ausgänge: 2 Schließer, potenzialfrei
Lastart: AC1
Nennstrom: 10 A, cos f0, 8
Schutzart Gerät: IP 20
Temperaturbereich Gerät: -5 °C bis 45 °C
Maße (H x B x T): 90 mm x 36 mm x 64 mm
Einbautiefe: 68 mm
Teilungseinheit: 2 TE
Bei Bedarf entnehmen Sie bitte Software und Beschreibung dem aktuellen E-Katalog.
1 TE ? 18 mm.
|
13425
|
6195/35
|
BINARY OUTPUT, 10 A, 2-FOLD, 10A
|
ACTUATORS - OUTPUTS
|
|
|
17389 |
6136/APP |
BUSCH-CONTROLTOUCH® HOUSE CONTROL, INFOTAINMENT, ENTERTAINMENT |
VISUALIZATION |
|
Freely programmable IP-/KNX gateway as multi-room app control for the KNX system.
MDRC devices with associated IOS and Android apps.
Easy control using intuitive navigation concept.
Representation of individual operating pages with list view.
Complete web-based commissioning.
Home automation, switching, dimming, blind, RTC control, scene/sequences, timing, Philips Hue.
Entertainment: multimedia integration via UPnP.
Infotainment: monitoring of usage data for up to 3 years.
Safety: video surveillance with IP cameras, message function via push messages or e-mail.
Time programs and scenes can be created by the end customer.
Access via KNXnet/IP tunnelling.
Script editor for logic functions.
Compatible with ABB i-bus® KNX
Control with smartphones and tablets via the ControlTouch app (Apple iOS /Google Android).
External power supply: 5-36 VDC (SELV).
Control element: freely programmable touch surfaces
Rated voltage: 5 V- - 36 V-
Bus voltage: 24 V-
Protection class (Device): IP 20
Temperature range (Device): 0 °C to 70 °C
Dimensions: (L x W x D): 90 mm x 72 mm x 60 mm
Module width: 4 MW
Position for installation: Horizontal |
17389
|
6136/APP
|
BUSCH-CONTROLTOUCH® HOUSE CONTROL, INFOTAINMENT, ENTERTAINMENT
|
VISUALIZATION
|
|
|
18210 |
6321/58-24G |
5/10 CHANNEL PUSH BUTTON IR AND RTR, BUSCH-TRITON® |
PUSH BUTTONS |
|
With integrated KNX bus coupler. Field with subtitles. Function button (switching function / dimmer / blind / send value / lighting / ventilation) Master / slave operation. With base of operation of the load. Control panel with room thermostat function for control of heating, ventilation and fan coil actuators. The controller is a constant temperature controller for fan coil in 2 - 4-pipe installations and conventional heating and cooling equipment The fan speed can be activated manually or in automatic mode For control via Bush-Ferncontrol® IR transmitter 6010-25 or 6020 -... / 6021 ... Temperature controller class 1 Contribution to space heating energy efficiency 1.0%. Controls: left / right key in contact Display items: LED for switching status indication Connections: KNX line: bus terminal Protective device: IP 20 Device temperature range: -5 ° C to 45 ° C Dimensions (H x B x T): 159 x 90 mm Software for labels: http://www.BUSCH-JAEGER-Beschriftungstool.dePlastic painted surface. |
18210
|
6321/58-24G
|
5/10 CHANNEL PUSH BUTTON IR AND RTR, BUSCH-TRITON®
|
PUSH BUTTONS
|
|
|
18213 |
6321/38-24G |
3/6 CHANNEL PUSH BUTTON IR AND RTR, BUSCH-TRITON® |
PUSH BUTTONS |
|
With integrated KNX bus coupler.
Field with subtitles.
Function button (switching function / dimmer / blind / send value / lighting / ventilation)
Master / slave operation.
With base of operation of the load.
Control panel with room thermostat function for control of heating, ventilation and fan coil actuators.
The controller is a constant temperature controller for fan coil in 2 - 4-pipe installations and conventional heating and cooling equipment
The fan speed can be activated manually or in automatic mode
For control via Bush-Ferncontrol® IR transmitter 6010-25 or 6020 -... / 6021 ...
Temperature controller class 1
Contribution to space heating energy efficiency 1.0%.
Controls: left / right key in contact
Indicators: LED for switching status indication
Connections:
KNX line: bus terminal
Protective device: IP 20
Device temperature range: -5 ° C to 45 ° C
Dimensions (H x B x T): 97 mm x 90 mm
If necessary, refer to the programmable functions of the current Description of the application, which can be downloaded from the Internet site www.busch-jaeger.de.
Software creation TAGS http://www.BUSCH-JAEGER-Beschriftungstool.de.
Plastic painted surface. |
18213
|
6321/38-24G
|
3/6 CHANNEL PUSH BUTTON IR AND RTR, BUSCH-TRITON®
|
PUSH BUTTONS
|
|
|
19222 |
6136/07-811 |
Programmable KNX touch display room controller Busch-SmartTouch® 7" |
VISUALIZATION |
|
Freely programmable KNX touch display as room-overlapping
comprehensive control, reporting and control unit.
To be used as inner station video for the door commu-
nication system Busch-Welcome.
For presentation and operation of the following KNX
Standard features:
- switching
- dimming
- Slider
- Blinds
- RGBW control element
- Tap changer
- Scene switch
- Display element
- Audio control
With scene function, logic functions, presence
mulation and time programs.
For the display of fault and alarm messages.
Page presentation with max. 16 touch surfaces on one
Page.
External power supply: 20-32 VDC (SELV) or
via the system center Busch-Welcome.
Operating elements: freely programmable touch surfaces
Display elements: capacitive touch display 1024 x
600 pixels
Connections:
KNX line: plug-in terminal
Rated voltage: 20 - 32 V-
Degree of protection device: IP 20
Temperature range device: 0 ° C to 45 ° C
Dimensions (H x W x D): 165 mm x 246 mm x 25 mm
Installation depth: 60 mm
Installation position: horizontal |
19222
|
6136/07-811
|
PROGRAMMABLE KNX TOUCH DISPLAY ROOM CONTROLLER BUSCH-SMARTTOUCH® 7"
|
VISUALIZATION
|
|
|
19316 |
6197/45 |
DALI Gateway 1 CHANNEL , Basic |
GATEWAYS |
|
For controlling DALI devices via the KNX. On
DALI output for max. 64 DALI participants. integrated
DALI power supply. The control can be per
DALI participants, via lighting groups (16), in common
in broadcast or via scenes (16). Scope-
Rich error and fault messages are available.
DALI emergency lighting converters according to EN 62386-202
supported. The emergency light converter can be used to
tion test and a long-term test triggered by KNX and the
Result on the KNX.
Integrated slave, staircase light, lock and forced
management function. Changeable DALI telegram rate. For
an individual readdressing of the DALI participants
or group assignment is a separate diagnostic
and commissioning tool available.
Connections:
KNX line: bus connection terminal
Rated voltage: 230 V ~
Rated frequency: 50 Hz - 60 Hz
Outputs: 1x DALI channels, independent
Degree of protection device: IP 20
Temperature range Device: -5 ° C to 45 ° C
Dimensions (H x W x D): 90 mm x 70 mm x 64 mm
Installation depth: 68 mm
Division: 4 TE |
19316
|
6197/45
|
DALI GATEWAY 1 CHANNEL , BASIC
|
GATEWAYS
|
|
|
19438 |
1742-866 |
BLIND COVER |
OTHER ACCESSORIES |
|
Important facts for you at a glance:
Halogen free: yes
Material: metal
Color: stainless steel colors
Manufacturer color: Stainless steel colors
Surface: matt
Compilation: Control element
Show claw / screwdriver complete description |
19438
|
1742-866
|
BLIND COVER
|
OTHER ACCESSORIES
|
|
|
19578 |
6131/31-24 |
Presence detector for false ceiling |
DETECTORS |
|
|
Busch presence detector Premium KNX, studio white matt, Bus installation bus KNX, Presence detector, Busch-Watchdog AP, Busch presence detector Premium KNX 12 meter detection area (at 2.5 m, 3 m and 4 m mounting height): circular. Seated persons Ø: max. 8 m, max. 10 m and max. 14 m. Outgoing persons Ø: max. 10 m, max. 12 m and max. 16 m. Construction height 23 mm. With 4 channels. For dimming / controlling the brightness to a defined value in a designated detection area. HVAC function for controlling heating and / or cooling systems as well as ventilation systems in the designated detection area. Detector application with 2-stage shutdown function. Detector application with integrated monitoring function. Constant light controller with up to 2 independent channels. Constant light controller with max. 2 outputs for brightness-dependent dimming / regulation of two light bands in the room. Integrated object room thermostat. 10 freely programmable IR channels (blue and / or white) Incl. 5 logic channels (logic gate, gate, delay and staircase light). Evaluation via internal brightness sensor. Weighting of up to 2 external brightness values ??and the internal brightness sensor possible. The programming button can be activated with the IR remote control 6010-25 (-500). With integrated KNX bus coupler. Suitable for suspended ceilings with a plate thickness of 9 to 25 mm. Installation dimension: Ø 68 mm. Suitable for surface mounting in combination with an AP housing. Does not fit in the British Standard and VDE flush-mounted box. Recommendation: HaloX-O flush-mounted box from Kaiser (Article No. 1290-40) with appropriate cover (1290-47 or 1290-85 for exposed concrete) or IBTronic H120-68 from Spelsberg (Item No. 97600501). Connections: KNX line: Bus connection terminal Brightness limit: 1 Lux - 1000 Lux Mounting height: 2 m - 4 m Degree of protection Device: IP 20 Temperature range Device: -5 ° C to 45 ° C Dimensions (H x W x D): 91 mm x 91 mm x 45 mm mounting depth: 22 mm |
19578
|
6131/31-24
|
PRESENCE DETECTOR FOR FALSE CEILING
|
DETECTORS
|
|
|
427 |
1746 ZRKT-24G |
Intermediate ring Busch-triton® 1gang |
OTHER ACCESSORIES |
|
|
Intermediate Ring
Intermediate ring Busch-triton® 1gang 2 P + E, 10/16 A,
250 V for Reflex SI socket outlet 20 EUCKS-xxx,
2531-xxx, 1803-02-xxx, 2147 U-xxx |
427
|
1746 ZRKT-24G
|
INTERMEDIATE RING BUSCH-TRITON® 1GANG
|
OTHER ACCESSORIES
|
|
|
455 |
20 EUCKST-71 |
Combi-SCHUKO -socket outlet in Busch-triton |
SIN FAMILIA |
|
|
Combination Socket Outlet
Combi-SCHUKO -socket outlet in Busch-triton design shuttered 2 P + E, 10/16 A, 250 V for operating elements
6321-xxx, 6322-xxx-101, 6323-xxx, 6326-xxx-101 |
455
|
20 EUCKST-71
|
COMBI-SCHUKO -SOCKET OUTLET IN BUSCH-TRITON
|
SIN FAMILIA
|
|
|
456 |
20 EUJKS-212 |
BUSCH-DURO 2000® SI |
SIN FAMILIA |
|
|
Busch-Duro 2000® SI
SCHUKO® Socket Outlets
SCHUKO® Socket Outlet
Shuttered.
Mounting Type: Flush-mounted With screwless terminal 2 P + E Rated voltage: 250 V~ Rated current: 16 A Terminals suitable for loop connection in accordance with VDE 0620-1. Increased shock protection .
|
456
|
20 EUJKS-212
|
BUSCH-DURO 2000® SI
|
SIN FAMILIA
|
|
|
457 |
20 EUJKS-214 |
SI-SCHUKO-KS-STECKD.-EINS |
SIN FAMILIA |
|
|
Reflex SI
SCHUKO® Socket Outlets
SCHUKO® Socket Outlet
Shuttered.
Mounting Type: Flush-mounted
With screwless terminal 2 P + E
Rated voltage: 250 V~
Rated current: 16 A
Terminals suitable for loop connection in accordance with VDE 0620-1. Increased shock protection .
|
457
|
20 EUJKS-214
|
SI-SCHUKO-KS-STECKD.-EINS
|
SIN FAMILIA
|
|
|
458 |
20 EUJKST-24G |
Socket Outlet Busch-triton® |
SIN FAMILIA |
|
|
Socket Outlet Busch-triton®
SCHUKO®-socket outlet with screwless terminal in Busch-triton®-design
studio white high gloss |
458
|
20 EUJKST-24G
|
SOCKET OUTLET BUSCH-TRITON®
|
SIN FAMILIA
|
|
|
459 |
20 EUJKST-71 |
Socket Outlet Busch-triton® |
SIN FAMILIA |
|
|
Socket Outlet Busch-triton®
SCHUKO®-socket outlet with screwless terminal in Busch-triton®-design.
brilliant black
|
459
|
20 EUJKST-71
|
SOCKET OUTLET BUSCH-TRITON®
|
SIN FAMILIA
|
|
|
461 |
20 EUJSR-212 |
SCHUKO® STECKDOSE |
SIN FAMILIA |
|
|
Busch-Duro 2000® SI
SCHUKO® Socket Outlets
SCHUKO® Socket Outlet
With screw-on mounting plate
Mounting Type: Flush-mounted
2 P + E Complete unit in SI design screw-on mounting plate 90 x 90 mm
Rated voltage: 250 V~
Rated current: 16 A
Terminals suitable for loop connection in accordance with VDE 0620-1. Separat installation only possible.
|
461
|
20 EUJSR-212
|
SCHUKO® STECKDOSE
|
SIN FAMILIA
|
|
|
462 |
20 EUJSR-214 |
SCHUKO® SOCKET OUTLET |
SIN FAMILIA |
|
|
Reflex SI
SCHUKO® Socket Outlets
SCHUKO® Socket Outlet
With screw-on mounting plate
Mounting Type: Flush-mounted
2 P + E Complete unit in SI design screw-on mounting plate 90 x 90 mm
Rated voltage: 250 V~
Rated current: 16 A
Terminals suitable for loop connection in accordance with VDE 0620-1. Separat installation only possible.
|
462
|
20 EUJSR-214
|
SCHUKO® SOCKET OUTLET
|
SIN FAMILIA
|
|
|
463 |
2114-212 |
CONTROL COVERS |
SIN FAMILIA |
|
|
Busch-Duro 2000® SI
Busch-Dimmer® - control covers
Cover Plate
for cooling element
For Universal Master Dimmer® power module 6594 U. For room thermostat 6134 / 10 and base for blind plate 6930 / 01. |
463
|
2114-212
|
CONTROL COVERS
|
SIN FAMILIA
|
|
|
464 |
2114-214 |
COVER PLATE FOR COOLING ELEMENT |
SIN FAMILIA |
|
|
Reflex SI
Busch-Dimmer® - control covers
Cover Plate
for cooling element
For Universal Master Dimmer® power module 6594 U. For room thermostat 6134 / 10 and base for blind plate 6930 / 01.
|
464
|
2114-214
|
COVER PLATE FOR COOLING ELEMENT
|
SIN FAMILIA
|
|
|
465 |
3099-0-0306 |
SCHILDTRAEGER |
OTHER ACCESSORIES |
|
|
Busch-Powernet® EIB / KNX
Zubehör
Schildträger
Für Busch-Jaeger REG Komponenten. Zum Aufrasten auf entsprechende Geräteaussparungen.
|
465
|
3099-0-0306
|
SCHILDTRAEGER
|
OTHER ACCESSORIES
|
|
|
466 |
3099-0-0314 |
BESCHRIFTUNGSSCHILD (250) |
OTHER ACCESSORIES |
|
|
Busch-Powernet® EIB / KNX
Zubehör
Beschriftungsbogen
Passend für Schildträger 3099-0-0306. Papierbogen mit 250 Beschriftungsschildern.
|
466
|
3099-0-0314
|
BESCHRIFTUNGSSCHILD (250)
|
OTHER ACCESSORIES
|
|
|
474 |
6021-24 |
IR WALL-MOUNTED TRANSMITTER 1-CHANNEL |
SENSORS |
|
|
Busch-Remote-Control IR
Surface-mounted devices
IR Wall-Mounted Transmitter
1-channel
Mounting Type: Surface-mounted
Network-independent infrared remote control. For infrared reception and EIB flush-mounted infrared interface (switching and dimming an IR address possible. ALL OFF function for respective address group.). Range: 15 m Supply: 6 V Flat-Pack battery (e.g. Duracell 7 K 67, not included in delivery)
For function together with EIB flush-mounted, infrared interface, see Technical Manual. Except 6321- and 6326--101.
|
474
|
6021-24
|
IR WALL-MOUNTED TRANSMITTER 1-CHANNEL
|
SENSORS
|
|
|
710 |
6174/11 |
System technology / ABB i-bus® EIB/KNX for busch-jaeger / Switch actuator module 2gang, 6A |
ACTUATORS - OUTPUTS |
|
|
System technology / ABB i-bus® EIB/KNX for busch-jaeger / Switch actuator module 2gang, 6A
EIB switch actuator module 6 A, 2gang
Surface-mounted
For room controller Busch Installation Bus® EIB/KNX
For switching electrical consumers.
Installation in the room controller only
The following functions are provided via the Room Controller:
Outputs: Switching, Logic, ON/OFF delay, Staircase light function, Staircase function with pre-warning, Scenes, Pre-set, Status
Connections:
Power supply: Screw/clamp terminals, 0.2 - 4.0 mm²
multiple-wire: 0.2 -2.5 mm²
Dimensions: (L x W x D): 49 mm x 42 mm x 93 mm
Technical data:
Rated voltage: 230 V
Rated frequency: 50 Hz
Outputs: 2, Normally open contact
Suitable for: AC1/AC3
Rated current: 6 A
Physical properties:
Protection class (Device): IP 20
Manufacturer: Busch-Jaeger Elektro GmbH
Article Number: 6174/11
Deliver and assemble ready for operation,
or equivalent.
Product offered:
Type:
|
710
|
6174/11
|
SYSTEM TECHNOLOGY / ABB I-BUS® EIB/KNX FOR BUSCH-JAEGER / SWITCH ACTUATOR MODULE 2GANG, 6A
|
ACTUATORS - OUTPUTS
|
|
|
711 |
6174/12 |
System technology / ABB i-bus® EIB/KNX for busch-jaeger / Blind actuator module 2gang, 6A |
ACTUATORS - OUTPUTS |
|
|
System technology / ABB i-bus® EIB/KNX for busch-jaeger / Blind actuator module 2gang, 6A
EIB blind actuator module 6 A, 2gang
Surface-mounted
For room controller Busch Installation Bus® EIB/KNX
For controlling two independent drives.
Separate locking (UP position) e.g. possible using Wind Watchdog
Without additional voltage supply
Installation in the room controller only
The following functions are provided via the Room Controller:
Outputs: Blind, Position, Security function, Wind alarm, Rain alarm, Frost alarm, Automatic sun protection, Automatic heating/cooling, Status, Position check-back signal, Scenes, Ventilation-flap operation, Run to pre-set and set
Connections:
Power supply: Screw/clamp terminals, 0.2 - 4.0 mm²
multiple-wire: 0.2 -2.5 mm²
Dimensions: (L x W x D): 49 mm x 42 mm x 93 mm
Technical data:
Rated voltage: 230 V
Rated frequency: 50 Hz
Outputs: 2, Change-over switch
Suitable for: AC1
Rated current: 6 A
Physical properties:
Protection class (Device): IP 20
Manufacturer: Busch-Jaeger Elektro GmbH
Article Number: 6174/12
Deliver and assemble ready for operation,
or equivalent.
Product offered:
Type:
|
711
|
6174/12
|
SYSTEM TECHNOLOGY / ABB I-BUS® EIB/KNX FOR BUSCH-JAEGER / BLIND ACTUATOR MODULE 2GANG, 6A
|
ACTUATORS - OUTPUTS
|
|
|
712 |
6174/13 |
System technology / ABB i-bus® EIB/KNX for busch-jaeger / Blind actuator module 2gang, 24V 6A |
ACTUATORS - OUTPUTS |
|
|
System technology / ABB i-bus® EIB/KNX for busch-jaeger / Blind actuator module 2gang, 24V 6A
EIB blind actuator module 6 A, 2gang
Surface-mounted
For room controller Busch Installation Bus® EIB/KNX
For controlling two independent drives.
Separate locking (UP position) e.g. possible using Wind Watchdog
Without additional voltage supply
Installation in the room controller only
The following functions are provided via the Room Controller:
Outputs: Blind, Position, Security function, Wind alarm, Rain alarm, Frost alarm, Automatic sun protection, Automatic heating/cooling, Status, Position check-back signal, Scenes, Ventilation-flap operation, Run to pre-set and set
Connections:
Power supply: Screw/clamp terminals, 0.2 - 4.0 mm²
multiple-wire: 0.2 -2.5 mm²
Dimensions: (L x W x D): 49 mm x 42 mm x 93 mm
Technical data:
Rated voltage: 24 V
Outputs: 2, Change-over switch
Suitable for: DC
Rated current: 6 A
Physical properties:
Protection class (Device): IP 20
Manufacturer: Busch-Jaeger Elektro GmbH
Article Number: 6174/13
Deliver and assemble ready for operation,
or equivalent.
Product offered:
Type:
|
712
|
6174/13
|
SYSTEM TECHNOLOGY / ABB I-BUS® EIB/KNX FOR BUSCH-JAEGER / BLIND ACTUATOR MODULE 2GANG, 24V 6A
|
ACTUATORS - OUTPUTS
|
|
|
714 |
6174/15 |
System technology / ABB i-bus® EIB/KNX / Universal dimmer actuator module 1gang, 300 V
|
ACTUATORS - OUTPUTS |
|
|
System technology / ABB i-bus® EIB/KNX / Universal dimmer actuator module 1gang, 300 V
EIB Universal dimmer actuator 300 VA, 1gang
Surface-mounted
For room controller Busch Installation Bus® EIB/KNX
For switching and dimming incandescent lamps, 230 V tungsten halogen lamps and low-voltage halogen lamps with conventional or electronic transformer.
Switching-on brightness and dimming speed adjustable via the ETS
Installation in the room controller only
The following functions are provided via the Room Controller:
Outputs: Switching, Dimming, Fixed value, Memory switching, Staircase light function, Scenes
Connections:
Power supply: screw terminals, 0.2 - 4.0 mm²
multiple-wire: 0.2 -2.5 mm²
Dimensions: (L x W x D): 49 mm x 42 mm x 93 mm
Technical data:
Rated voltage: 230 V
Rated frequency: 50 Hz
Outputs: 1, electronic output, potential-bound
Suitable for: 230 V incandescent lamps/230 V halogen lamps
Rated power: 300 W/VA
Suitable for: 127 V incandescent lamps/127 V halogen lamps
Rated power: 150 W/VA
Physical properties:
Protection class (Device): IP 20
Manufacturer: Busch-Jaeger Elektro GmbH
Article Number: 6174/15
Deliver and assemble ready for operation,
or equivalent.
Product offered:
Type:
|
714
|
6174/15
|
SYSTEM TECHNOLOGY / ABB I-BUS® EIB/KNX / UNIVERSAL DIMMER ACTUATOR MODULE 1GANG, 300 V
|
ACTUATORS - OUTPUTS
|
|
|
716 |
6174/17 |
System technology / ABB i-bus® EIB/KNX for busch-jaeger / Heating actuator module 2gang |
CLIMATE CONTROL |
|
|
System technology / ABB i-bus® EIB/KNX for busch-jaeger / Heating actuator module 2gang
EIB heating actuator module, 2gang
Surface-mounted
For room controller Busch Installation Bus® EIB/KNX
For controlling heating units and cooled ceilings, together with thermoelectric positioners.
With noiseless electronic output
The heating actuator functions with an option of either direct or alternating voltage (230 V~)
With automatic rinsing function
Installation in the room controller only
The following functions are provided:
Outputs: Switching, Heating, Cooling, Continuous, Automatic position, Signal, Fan coil, Scenes, Status
Connections:
Power supply: Screw/clamp terminals, 0.2 - 4.0 mm²
multiple-wire: 0.2 -2.5 mm²
Dimensions: (L x W x D): 49 mm x 42 mm x 93 mm
Technical data:
Rated voltage: 230 V
Rated frequency: 50 Hz
Outputs: 2, electronic output, potential-bound, 230 V~
Suitable for:
Rated current: 0.7 A, cos phi 1
Physical properties:
Protection class (Device): IP 20
Manufacturer: Busch-Jaeger Elektro GmbH
Article Number: 6174/17
Deliver and assemble ready for operation,
or equivalent.
Product offered:
Type:
|
716
|
6174/17
|
SYSTEM TECHNOLOGY / ABB I-BUS® EIB/KNX FOR BUSCH-JAEGER / HEATING ACTUATOR MODULE 2GANG
|
CLIMATE CONTROL
|
|
|
717 |
6174/18 |
System technology / ABB i-bus® EIB/KNX for busch-jaeger / Heating actuator module 2gang, 24V
|
CLIMATE CONTROL |
|
|
System technology / ABB i-bus® EIB/KNX for busch-jaeger / Heating actuator module 2gang, 24V
EIB heating actuator module 24V, 2gang
Surface-mounted
For room controller Busch Installation Bus® EIB/KNX
For controlling heating units and cooled ceilings, together with thermoelectric positioners.
With noiseless electronic output
The heating actuator functions with an option of either direct or alternating voltage (230 V~)
With automatic rinsing function
Installation in the room controller only
The following functions are provided via the Room Controller:
Outputs: Switching, Heating, Cooling, Continuous, Automatic position, Signal, Fan coil, Scenes, Status
Connections:
Power supply: Screw/clamp terminals, 0.2 - 4.0 mm²
multiple-wire: 0.2 -2.5 mm²
Dimensions: (L x W x D): 49 mm x 42 mm x 93 mm
Technical data:
Rated voltage: 24 V
Rated frequency: 50 Hz
Outputs: 2, electronic output, potential-bound, 230 V~
Suitable for:
Rated current: 0.7 A, cos phi 1
Physical properties:
Protection class (Device): IP 20
Manufacturer: Busch-Jaeger Elektro GmbH
Article Number: 6174/18
Deliver and assemble ready for operation,
or equivalent.
Product offered:
Type:
|
717
|
6174/18
|
SYSTEM TECHNOLOGY / ABB I-BUS® EIB/KNX FOR BUSCH-JAEGER / HEATING ACTUATOR MODULE 2GANG, 24V
|
CLIMATE CONTROL
|
|
|
718 |
6174/19 |
System technology / ABB i-bus® EIB/KNX for busch-jaeger / Binary input module 4gang, 230 V
|
INPUTS |
|
|
System technology / ABB i-bus® EIB/KNX for busch-jaeger / Binary input module 4gang, 230 V
EIB binary input actuator module 230 V, 4gang
Surface-mounted
For room controller Busch Installation Bus® EIB/KNX
For transmitting messages to EIB devices.
Sensor for connecting external 230 V contacts
The device requires no additional power supply.
Installation in the room controller only
The following functions are provided via the Room Controller:
Inputs: Switching, Dimming, Blind, Flank, Value, Cyclical, Pulse counter
Connections:
Inputs: Screw/clamp terminals, 0.2 - 4.0 mm²
multiple-wire: 0.2 -2.5 mm²
Dimensions: (L x W x D): 49 mm x 42 mm x 93 mm
Inputs: 4
Signal voltage: 230 V~
Signal level: 0 - 40 V~ - 90 - 264 V~
Signal current: 2 mA
max. length of sensor line: 100 m
Physical properties:
Protection class (Device): IP 20
Manufacturer: Busch-Jaeger Elektro GmbH
Article Number: 6174/19
Deliver and assemble,
or equivalent.
Product offered:
Type:
|
718
|
6174/19
|
SYSTEM TECHNOLOGY / ABB I-BUS® EIB/KNX FOR BUSCH-JAEGER / BINARY INPUT MODULE 4GANG, 230 V
|
INPUTS
|
|
|
719 |
6174/20 |
System technology / ABB i-bus® EIB/KNX for busch-jaeger / Binary input module 4gang, 24 V
|
INPUTS |
|
|
System technology / ABB i-bus® EIB/KNX for busch-jaeger / Binary input module 4gang, 24 V
EIB binary input actuator module 24 V, 4gang
Surface-mounted
For room controller Busch Installation Bus® EIB/KNX
For transmitting switching, push-button, value, dimming and blind commands to an EIB actuator.
Sensor for connecting external, potential free 24 V contacts.
The 24 V interrogation voltage must be provided externally
Installation in the room controller only
The following functions are provided via the Room Controller:
Inputs: Switching, Dimming, Blind, Flank, Value, Cyclical, Pulse counter
Connections:
Inputs: Screw/clamp terminals, 0.2 - 4.0 mm²
multiple-wire: 0.2 -2.5 mm²
Dimensions: (L x W x D): 49 mm x 42 mm x 93 mm
Inputs: 4
Signal voltage: 24 V
Signal level: 0 - 4 V - 9 - 30 V
Signal current: 2 mA
max. length of sensor line: 100 m
Physical properties:
Protection class (Device): IP 20
Manufacturer: Busch-Jaeger Elektro GmbH
Article Number: 6174/20
Deliver and assemble,
or equivalent.
Product offered:
Type:
|
719
|
6174/20
|
SYSTEM TECHNOLOGY / ABB I-BUS® EIB/KNX FOR BUSCH-JAEGER / BINARY INPUT MODULE 4GANG, 24 V
|
INPUTS
|
|
|
720 |
6174/21 |
System technology / ABB i-bus® EIB/KNX / for busch-jaeger Binary input module 4gang, contact interrogation
|
INPUTS |
|
|
System technology / ABB i-bus® EIB/KNX / for busch-jaeger Binary input module 4gang, contact interrogation
EIB binary input actuator module potential free, 4gang
Surface-mounted
For room controller Busch Installation Bus® EIB/KNX
For transmitting messages to EIB devices.
Sensor for connecting external, potential free 24 V contacts.
The 12 V interrogation voltage is provided by the device
The device requires no additional power supply.
Installation in the room controller only
The following applications are provided for the inputs:
Inputs: Switching, Dimming, Blind, Flank, Value, Cyclical, Pulse counter
Connections:
Inputs: Screw/clamp terminals, 0.2 - 4.0 mm²
multiple-wire: 0.2 -2.5 mm²
Dimensions: (L x W x D): 49 mm x 42 mm x 93 mm
Inputs:
Polling voltage: 12 V, potential-separated
Signal current: 0.2 mA, short-time at contact-making 190 mA
max. length of sensor line: 100 m
Physical properties:
Protection class (Device): IP 20
Manufacturer: Busch-Jaeger Elektro GmbH
Article Number: 6174/21
Deliver and assemble,
or equivalent.
Product offered:
Type:
|
720
|
6174/21
|
SYSTEM TECHNOLOGY / ABB I-BUS® EIB/KNX / FOR BUSCH-JAEGER BINARY INPUT MODULE 4GANG, CONTACT INTERROGATION
|
INPUTS
|
|
|
873 |
6541-20 |
Cover Plate for Room Thermostat, Commercial |
SIN FAMILIA |
|
|
Cover Plate for Room Thermostat, Commercial
Cover plates for room thermostat, commercial.
alpha nea®
Busch-Dimmer® -
platinun
|
873
|
6541-20
|
COVER PLATE FOR ROOM THERMOSTAT, COMMERCIAL
|
SIN FAMILIA
|
|
|
874 |
6541-21 |
Cover Plate for Room Thermostat, Commercial |
SIN FAMILIA |
|
|
Cover Plate for Room Thermostat, Commercial
Cover plates for room thermostat, commercial.
platinum
alpha nea®
Busch-Dimmer® |
874
|
6541-21
|
COVER PLATE FOR ROOM THERMOSTAT, COMMERCIAL
|
SIN FAMILIA
|
|
|
875 |
6541-22G |
Cover Plate for Room Thermostat, Commercial |
SIN FAMILIA |
|
|
Cover Plate for Room Thermostat, Commercial
alpha exclusive®
Busch-Dimmer®
Ivory
|
875
|
6541-22G
|
COVER PLATE FOR ROOM THERMOSTAT, COMMERCIAL
|
SIN FAMILIA
|
|
|
877 |
6541-24 |
Cover Plate for Room Thermostat, Commercial |
SIN FAMILIA |
|
|
Cover Plate for Room Thermostat, Commercial
alpha nea®
Busch-Dimmer®
studio white, matt
Für Busch-Universal-Zentraldimmer® Leistungsbaustein 6594 U. Für Raumtemperaturregler Objektbereich 6134 / 10 und Sockel für Blindabdeckung 6930 / 01. |
877
|
6541-24
|
COVER PLATE FOR ROOM THERMOSTAT, COMMERCIAL
|
SIN FAMILIA
|
|
|
878 |
6541-24G |
Cover Plate for Room Thermostat, Commercial |
SIN FAMILIA |
|
|
Cover Plate for Room Thermostat, Commercial
Cover plates for room thermostat, commercial.
studio white, high gloss
alpha exclusive®
|
878
|
6541-24G
|
COVER PLATE FOR ROOM THERMOSTAT, COMMERCIAL
|
SIN FAMILIA
|
|
|
881 |
6541-260 |
ZENTRALSCHEIBE |
SIN FAMILIA |
|
|
alpha exclusive®
Busch-Dimmer® - Bedienelemente
Zentralscheibe
für Kühlteil
Für Busch-Universal-Zentraldimmer® Leistungsbaustein 6594 U. Für Raumtemperaturregler Objektbereich 6134 / 10 und Sockel für Blindabdeckung 6930 / 01. |
881
|
6541-260
|
ZENTRALSCHEIBE
|
SIN FAMILIA
|
|
|
882 |
6541-266 |
ZENTRALSCHEIBE AL EXCLUSIVE |
SIN FAMILIA |
|
|
alpha exclusive®
Busch-Dimmer® - Bedienelemente
Zentralscheibe
für Kühlteil
Für Busch-Universal-Zentraldimmer® Leistungsbaustein 6594 U. Für Raumtemperaturregler Objektbereich 6134 / 10 und Sockel für Blindabdeckung 6930 / 01.
|
882
|
6541-266
|
ZENTRALSCHEIBE AL EXCLUSIVE
|
SIN FAMILIA
|
|
|
886 |
6541-74 |
Cover Plate for Room Thermostat,
Commercial alpine white |
SIN FAMILIA |
|
|
Cover Plate for Room Thermostat,
Commercial
Cover plates for room thermostat, commercial. |
886
|
6541-74
|
COVER PLATE FOR ROOM THERMOSTAT,
COMMERCIAL ALPINE WHITE
|
SIN FAMILIA
|
|
|
888 |
6541-79 |
Cover Plate for Room Thermostat,
Commercial , champagne metallic |
SIN FAMILIA |
|
|
Cover Plate for Room Thermostat,
Commercial
Cover plates for room thermostat, commercial.
champagne metallic |
888
|
6541-79
|
COVER PLATE FOR ROOM THERMOSTAT,
COMMERCIAL , CHAMPAGNE METALLIC
|
SIN FAMILIA
|
|
|
889 |
6541-81 |
C-SCH. SOLO KUEHLTEIL |
SIN FAMILIA |
|
|
future linear
Busch-Dimmer - Bedienelemente
Zentralscheibe
fr Khlteil
Fr Busch-Universal-Zentraldimmer Leistungsbaustein 6594 U. Fr Raumtemperaturregler Objektbereich 6134 / 10 und Sockel fr Blindabdeckung 6930 / 01.
|
889
|
6541-81
|
C-SCH. SOLO KUEHLTEIL
|
SIN FAMILIA
|
|
|
890 |
6541-82 |
COVER PLATE FOR COOLING ELEMENT |
SIN FAMILIA |
|
|
future linear
Busch-Dimmer - control covers
Cover Plate for cooling element
For Universal Master Dimmer power module 6594 U. For room thermostat 6134 / 10 and base for blind plate 6930 / 01. |
890
|
6541-82
|
COVER PLATE FOR COOLING ELEMENT
|
SIN FAMILIA
|
|
|
891 |
6541-84 |
COVER PLATE FOR COOLING ELEMENT |
SIN FAMILIA |
|
|
future linear
Busch-Dimmer - control covers
Cover Plate
for cooling element
For Universal Master Dimmer power module 6594 U. For room thermostat 6134 / 10 and base for blind plate 6930 / 01. |
891
|
6541-84
|
COVER PLATE FOR COOLING ELEMENT
|
SIN FAMILIA
|
|
|
897 |
6594 U |
Leistungsbaustein 315 W/VA 6594 U |
SIN FAMILIA |
|
|
Unterputz-Einstze
UP-Universal-Zentraldimmer
Busch-Universal-Zentraldimmer Leistungsbaustein
Die Ansteuerung erfolgt durch einen Busch-Universal-Zentraldimmer 6593 U oder Busch-Universal-Drehdimmer 6591U-101 Fr Glühlampen, 230 V-Halogenglhlampen und Niedervolt-Halogenlampen mit konventionellen Transformatoren oder Busch-Elektronik-Trafos. Nur einsetzbar in Verbindung mit einer Zentralscheibe 2114-xxx und 6541-xxx. Ohne Zentralscheibe.
Nennspannung: 230 V~, +10% / -10% Nennfrequenz: 50 Hz - 60 Hz
Nennleistung: 200 - 315 W / VA |
897
|
6594 U
|
LEISTUNGSBAUSTEIN 315 W/VA 6594 U
|
SIN FAMILIA
|
|
|
3578 |
1722-181K |
FRAME ANTHRACITE, SERIE FUTURE LINEAR |
SIN FAMILIA |
|
|
cover frame 2gang
future® linear cover frame
With small corner radii for trunking systems.
anthracite |
3578
|
1722-181K
|
FRAME ANTHRACITE, SERIE FUTURE LINEAR
|
SIN FAMILIA
|
|
|
3594 |
1721 KA-22G |
FRAME IVORY STUDIO WHITE, SERIE ALPHA EXCLUSIVE |
SIN FAMILIA |
|
|
Cover Frame
1gang
For vertical or horizontal installation.
Suitable for installation in trunking systems with 80 mm conduit.
ivory
|
3594
|
1721 KA-22G
|
FRAME IVORY STUDIO WHITE, SERIE ALPHA EXCLUSIVE
|
SIN FAMILIA
|
|
|
3600 |
1732 KA-22G |
FRAME IVORY STUDIO WHITE, SERIE ALPHA EXCLUSIVE |
SIN FAMILIA |
|
|
Cover Frame
1 gang
Vertical.
Suitable for installation in trunking systems with 80 mm conduit.
ivory
|
3600
|
1732 KA-22G
|
FRAME IVORY STUDIO WHITE, SERIE ALPHA EXCLUSIVE
|
SIN FAMILIA
|
|
|
3606 |
1733 KA-22G |
FRAME IVORY STUDIO WHITE, SERIE ALPHA EXCLUSIVE |
SIN FAMILIA |
|
|
Cover Frame
3gang
Vertical.
Suitable for installation in trunking systems with 80 mm conduit.
ivory/ studio white |
3606
|
1733 KA-22G
|
FRAME IVORY STUDIO WHITE, SERIE ALPHA EXCLUSIVE
|
SIN FAMILIA
|
|
|
3612 |
1734 KA-22G |
FRAME IVORY STUDIO WHITE, SERIE ALPHA EXCLUSIVE |
SIN FAMILIA |
|
|
Cover Frame
4 gang
FVertical.
Suitable for installation in trunking systems with 80 mm conduit.
Ivory
|
3612
|
1734 KA-22G
|
FRAME IVORY STUDIO WHITE, SERIE ALPHA EXCLUSIVE
|
SIN FAMILIA
|
|
|
3618 |
1722 KA-22G |
FRAME IVORY STUDIO WHITE, SERIE ALPHA EXCLUSIVE |
SIN FAMILIA |
|
|
Cover Frame
2 gang
Horizontal
Suitable for installation in trunking systems with 80 mm conduit.
IVORY/ WHITE STUDIO |
3618
|
1722 KA-22G
|
FRAME IVORY STUDIO WHITE, SERIE ALPHA EXCLUSIVE
|
SIN FAMILIA
|
|
|
3624 |
1723 KA-22G |
FRAME IVORY STUDIO WHITE, SERIE ALPHA EXCLUSIVE |
SIN FAMILIA |
|
|
Cover Frame
3gang
Horizontal
IVORY / STUDIO WHITE
Suitable for installation in trunking systems with 80 mm conduit.
|
3624
|
1723 KA-22G
|
FRAME IVORY STUDIO WHITE, SERIE ALPHA EXCLUSIVE
|
SIN FAMILIA
|
|
|
3630 |
1724 KA-22G |
FRAME IVORY STUDIO WHITE, SERIE ALPHA EXCLUSIVE |
SIN FAMILIA |
|
|
Cover Frame
4 gang
Horizontal
IVORY/ STUDIO WHITE
Suitable for installation in trunking systems with 80 mm conduit.
|
3630
|
1724 KA-22G
|
FRAME IVORY STUDIO WHITE, SERIE ALPHA EXCLUSIVE
|
SIN FAMILIA
|
|
|
3636 |
1725 KA-22G |
FRAME IVORY STUDIO WHITE, SERIE ALPHA EXCLUSIVE |
SIN FAMILIA |
|
|
Cover Frame
5gang
Horizontal
IVORY /STUDIO WHITE
Suitable for installation in trunking systems with 80 mm conduit.
|
3636
|
1725 KA-22G
|
FRAME IVORY STUDIO WHITE, SERIE ALPHA EXCLUSIVE
|
SIN FAMILIA
|
|
|
3646 |
1721-24G |
FRAME ALABASTER / STUDIO WHITE, SERIE ALPHA NEA |
SIN FAMILIA |
|
|
alpha nea®
Frames
Cover Frame 1 gang
studio white
For vertical or horizontal installation. |
3646
|
1721-24G
|
FRAME ALABASTER / STUDIO WHITE, SERIE ALPHA NEA
|
SIN FAMILIA
|
|
|
3648 |
1732-20 |
FRAME PALADIUM, SERIE ALPHA NEA |
SIN FAMILIA |
|
|
Cover Frame
2gang
Vertical.
platinum
|
3648
|
1732-20
|
FRAME PALADIUM, SERIE ALPHA NEA
|
SIN FAMILIA
|
|
|
3654 |
1733-20 |
FRAME PALADIUM, SERIE ALPHA NEA |
SIN FAMILIA |
|
|
Cover Frame
3gang
Vertical.
platinum
|
3654
|
1733-20
|
FRAME PALADIUM, SERIE ALPHA NEA
|
SIN FAMILIA
|
|
|
3660 |
1734-20 |
FRAME PALADIUM, SERIE ALPHA NEA |
SIN FAMILIA |
|
|
Cover Frame
5gang
Vertical.
Platinum
|
3660
|
1734-20
|
FRAME PALADIUM, SERIE ALPHA NEA
|
SIN FAMILIA
|
|
|
3666 |
1722-20 |
FRAME PALADIUM, SERIE ALPHA NEA |
SIN FAMILIA |
|
|
Cover Frame
2gang
Horizontal
platinum |
3666
|
1722-20
|
FRAME PALADIUM, SERIE ALPHA NEA
|
SIN FAMILIA
|
|
|
3667 |
1722-21 |
FRAME BRONZE, SERIE ALPHA NEA |
SIN FAMILIA |
|
|
Cover Frame
2gang
Horizontal
BRONZE |
3667
|
1722-21
|
FRAME BRONZE, SERIE ALPHA NEA
|
SIN FAMILIA
|
|
|
3672 |
1723-20 |
FRAME PALADIUM, SERIE ALPHA NEA |
SIN FAMILIA |
|
|
Cover Frame
3gang
Horizontal
platinum |
3672
|
1723-20
|
FRAME PALADIUM, SERIE ALPHA NEA
|
SIN FAMILIA
|
|
|
3678 |
1724-20 |
FRAME PALADIUM, SERIE ALPHA NEA |
SIN FAMILIA |
|
|
Cover Frame
4gang
Horizontal
platinum |
3678
|
1724-20
|
FRAME PALADIUM, SERIE ALPHA NEA
|
SIN FAMILIA
|
|
|
3684 |
1725-20 |
FRAME PALADIUM, SERIE ALPHA NEA |
SIN FAMILIA |
|
|
Cover Frame
5gang
Horizontal
platinum |
3684
|
1725-20
|
FRAME PALADIUM, SERIE ALPHA NEA
|
SIN FAMILIA
|
|
|
3690 |
1721-80 |
FRAME CHROME MATT, SERIE SOLO |
PUSH BUTTONS |
|
|
Cover Frame
1gang
For vertical or horizontal installation.
Suitable for installation in trunking systems with 80 mm conduit.
|
3690
|
1721-80
|
FRAME CHROME MATT, SERIE SOLO
|
PUSH BUTTONS
|
|
|
3691 |
1721-84 |
FRAME DAVOS / STUDIO WHITE, SERIE SOLO |
PUSH BUTTONS |
|
|
Cover Frame
1gang
For vertical or horizontal installation.
Suitable for installation in trunking systems with 80 mm conduit.
davos studio white
|
3691
|
1721-84
|
FRAME DAVOS / STUDIO WHITE, SERIE SOLO
|
PUSH BUTTONS
|
|
|
3692 |
1722-80 |
FRAME CHROME MATT, SERIE SOLO |
PUSH BUTTONS |
|
|
Cover Frame
2gang
For vertical or horizontal installation.
Suitable for installation in trunking systems with 80 mm conduit.
chrome matt
|
3692
|
1722-80
|
FRAME CHROME MATT, SERIE SOLO
|
PUSH BUTTONS
|
|
|
3704 |
1722-74 |
FRAME ALPINE WHITE, SERIE IMPULS |
SIN FAMILIA |
|
|
Cover Frame
2gang
For vertical or horizontal installation.
WHITE ALPINE |
3704
|
1722-74
|
FRAME ALPINE WHITE, SERIE IMPULS
|
SIN FAMILIA
|
|
|
3711 |
1723-74 |
FRAME ALPINE WHITE, SERIE IMPULS |
SIN FAMILIA |
|
|
Cover Frame
3gang
alpine WHITE
For vertical or horizontal installation.
|
3711
|
1723-74
|
FRAME ALPINE WHITE, SERIE IMPULS
|
SIN FAMILIA
|
|
|
3718 |
1724-74 |
FRAME ALPINE WHITE, SERIE IMPULS |
SIN FAMILIA |
|
|
Cover Frame
4gang
alpine white
For vertical or horizontal installation.
|
3718
|
1724-74
|
FRAME ALPINE WHITE, SERIE IMPULS
|
SIN FAMILIA
|
|
|
3725 |
1725-74 |
FRAME ALPINE WHITE, SERIE IMPULS |
SIN FAMILIA |
|
|
Cover Frame
5gang
alpine white
For vertical or horizontal installation.
|
3725
|
1725-74
|
FRAME ALPINE WHITE, SERIE IMPULS
|
SIN FAMILIA
|
|
|
4417 |
6136/UP |
Wall Box for Touchpanels |
VISUALIZATION |
|
|
Wall Box for Touchpanels
dimensions (l x b x d)
163,50 mm x 199 mm x 60 mm |
4417
|
6136/UP
|
WALL BOX FOR TOUCHPANELS
|
VISUALIZATION
|
|
|
4487 |
6136/10 |
6136/30M-101 Raumpanel black chrome |
VISUALIZATION |
|
|
6136/30M-101 Raumpanel black chrome
(H x B x T): 184, 6 mm x 218 mm x 9 mm |
4487
|
6136/10
|
6136/30M-101 RAUMPANEL BLACK CHROME
|
VISUALIZATION
|
|
|
7731 |
6885 |
Surface Mounting Base for Presence dectector white |
SIN FAMILIA |
|
|
Surface Mounting Base for Presence
Detector
Surface mounting base for Busch Watchdog® presence
detector EIB for installation of flush-mounted inserts in
combination with presence detector EIB 6131-74-10X |
7731
|
6885
|
SURFACE MOUNTING BASE FOR PRESENCE DECTECTOR WHITE
|
SIN FAMILIA
|
|
|
9247 |
6353/20-860 |
Labelling insert for lighting |
OTHER ACCESSORIES |
|
|
Lighting insert for Busch-priOn® control element 1-gang (6340-xxx) and 3-gang (6342-xxx) with "Lighting" symbol
|
9247
|
6353/20-860
|
LABELLING INSERT FOR LIGHTING
|
OTHER ACCESSORIES
|
|
|
9250 |
6353/30-860 |
Lightning insert for blinds |
OTHER ACCESSORIES |
|
|
Lighting insert for Busch-priOn® control element 1-gang (6340-xxx) and 3-gang (6342-xxx) with "Blinds" symbol
|
9250
|
6353/30-860
|
LIGHTNING INSERT FOR BLINDS
|
OTHER ACCESSORIES
|
|
|
9251 |
6353/40-860 |
Labelling insert for room temperature |
OTHER ACCESSORIES |
|
|
Lighting insert for Busch-priOn® control element 1-gang (6340-xxx) and 3-gang (6342-xxx) with "Ambient Temperature" symbol
|
9251
|
6353/40-860
|
LABELLING INSERT FOR ROOM TEMPERATURE
|
OTHER ACCESSORIES
|
|
|
9252 |
6353/50-860 |
Labelling insert for scene |
OTHER ACCESSORIES |
|
|
Lighting insert for Busch-priOn® control element 1-gang (6340-xxx) and 3-gang (6342-xxx) with "Scene" symbol
|
9252
|
6353/50-860
|
LABELLING INSERT FOR SCENE
|
OTHER ACCESSORIES
|
|
|
9702 |
1724-80 |
Solo, Frame 4 folds |
SIN FAMILIA |
|
|
Abdeckrahmen |
9702
|
1724-80
|
SOLO, FRAME 4 FOLDS
|
SIN FAMILIA
|
|
|
9937 |
6584 |
Busch-Universal master dimmer® capacity booster |
ACTUATORS - OUTPUTS |
|
|
To be used with Busch-Universal master dimmer® 6583. For incandescent lamps, 230 V tungsten halogen lamps and low-voltage halogen lamps with conventional transformers or electronic transformers. A combination of up to 6 power electronic modules (3, 000 W/VA) possible. With ready-made line with jack (RJ12) for connecting to central dimmer 6583.
Rated voltage: 230 V~, +10% / -10% Rated frequency: 50 Hz - 60 Hz
Rated power: 200 - 420 W/VA
module width: 2 MW |
9937
|
6584
|
BUSCH-UNIVERSAL MASTER DIMMER® CAPACITY BOOSTER
|
ACTUATORS - OUTPUTS
|
|
|
9938 |
6583 |
Busch-Universal master dimmer® |
ACTUATORS - OUTPUTS |
|
|
Universal Central Dimmer modular. For switching and dimming incandescent lamps, 230 V tungsten halogen lamps and low-voltage halogen lamps with conventional or Busch-Electronic transformers. With light-level memory, adjustable minimum brightness and with intelligence for universal operation. Capacity expansion via output-side parallel-connected load line (with RJ 12 plug) with a power module 6584 (max. 6 pcs = 3000 W/VA total wattage). Compatible with control module 6597, ABB i-bus® KNX in combination with control module 6197/11-10x. Operation using a plug-in push switch/rotary and timer control cover 6543/10, ..11, --12 and/or a conventional push switch (2020 US or 2021/6 UK or Rotary Dimmer insert for combination with flush-mounted inserts 6592 U. Low-noise, short-circuit protected, overload-protected.
Rated voltage: 230 V~, +10% / -10% Rated frequency: 50 Hz - 60 Hz
Rated power: 60 - 500 W/VA
Temperature range (Device): 0 °C - 45 °C
module width: 2 MW |
9938
|
6583
|
BUSCH-UNIVERSAL MASTER DIMMER®
|
ACTUATORS - OUTPUTS
|
|
|
10099 |
6845/11 AGM-204 |
Busch-Watchdog 220 ProfessionalLINE
without IR remote control
|
DETECTORS |
|
|
Electronic movement detector for detecting thermal motion. Remote control possible via IR mobile remote control 6841. Remote configurable via IR service remote control 6842. With display for detection and operation mode. With ground and rear-field detection. With planar compensation: +/- 30°. °.With high-quality lens for optimum detection.. Detection sensitivity selectable in 3 steps. Surveillance density: 84 sectors with 336 switching segments. All functions controlled by microprocessor. Permanent light and presence simulation can be activated via remote control. With automatic range stabilization. With automatic interference suppression. With automatic dazzle-proofing. With brightness-independent test mode for evaluating the detection zone. Additional possibility for switch-on via normally open push-button switch. Switch-off delay: 10 sec to 30 min or short-time pulse 1 sec adjustable.
Rated voltage: 230 V~, +10% / -10% Rated frequency: 50 Hz - 60 Hz Power dissipation: 1 W
Outputs: 1 Normally open contact, potential-bound Suitable for: ohmic, capacitive and inductive loads Rated current: 16 AX, cos f0.6 Rated power: 3680 W/VA
Protection class (Device): IP 55 Temperature range (Device): -25 °C - 55 °C Detection range: frontal: 16 m lateral: 16 m Brightness limit value: 0.5 Lux - 300 Lux - , Daytime operation Detection angle: 220 °
Dimensions: (L x W x D): 97 mm x 97 mm x 159 mm Mounting height: - 2.5 m |
10099
|
6845/11 AGM-204
|
BUSCH-WATCHDOG 220 PROFESSIONALLINE
WITHOUT IR REMOTE CONTROL
|
DETECTORS
|
|
|
11106 |
6348-24G-101 |
Barra estándar extremo superior Busch-priOn |
OTHER ACCESSORIES |
|
|
Para montarse en marcos base de 1 a 3 canales |
11106
|
6348-24G-101
|
BARRA ESTÁNDAR EXTREMO SUPERIOR BUSCH-PRION
|
OTHER ACCESSORIES
|
|
|
11204 |
6346/11-101 |
Suppot frame, 2-gang, Busch-priOn |
PUSH BUTTONS |
|
|
Support frame for Busch-priOn® for the accommodation and termination of a rotary control element (6341-xxx-101), 1gang control element (6340-xxx-101), 3gang control element (6342-xxx-101), flush-mounted Watchdog (6345-xxx-101), standard top end strip (6348-xxx-101), standard bottom end strip (6349-xxx-101), end strip for IR and top proximity sensor (6350-xxx-101), end strip for display, RTC, IR, and proximity sensor (6351-xxx-101 or 6351/08-xxx-101), and bottom temperature sensor end strip (6352-xxx-101).
For contacting with power bus coupler 6120/13.
For contacting with power mains coupler 6920/13.
Temperature range (Device): -5 °C to 45 °C
Dimensions: (L x W x D): 142 mm x 100 mm x 11 mm
|
11204
|
6346/11-101
|
SUPPOT FRAME, 2-GANG, BUSCH-PRION
|
PUSH BUTTONS
|
|
|
11310 |
6346/10-101 |
Suppot frame, 1-gang, Busch-priOn |
PUSH BUTTONS |
|
|
Suppot frame, 1-gang, Busch-priOn |
11310
|
6346/10-101
|
SUPPOT FRAME, 1-GANG, BUSCH-PRION
|
PUSH BUTTONS
|
|
|
12254 |
0213 |
Universal data connection unit, cat. 3, 1 GANG |
SIN FAMILIA |
|
With down-leading outlet.
For 8-pole plug, RJ 11/12, RJ 45, ISDN capability, Cat. 3.
Design according to IEC 60 603-7-2:2007.
Screw contacts
With claw. |
12254
|
0213
|
UNIVERSAL DATA CONNECTION UNIT, CAT. 3, 1 GANG
|
SIN FAMILIA
|
|
|
12255 |
0232-101 |
Satellite co-axial outlets Radio/TV/SAT |
SIN FAMILIA |
|
|
Broadband technology 47-2.150 MHz.
SAT connection designed as screwable F-male plug.
with remote feed via F-bush
For DVB-T and broadband-cable-systems.
For analogue and digital transmission.
With claw.
Minimal installation depth, class A.
|
12255
|
0232-101
|
SATELLITE CO-AXIAL OUTLETS RADIO/TV/SAT
|
SIN FAMILIA
|
|
|
12257 |
1742-84 |
Blank plate, with metal mounting plate. |
SIN FAMILIA |
|
|
Covers for data communication Blank plate with metal mounting plate |
12257
|
1742-84
|
BLANK PLATE, WITH METAL MOUNTING PLATE.
|
SIN FAMILIA
|
|
|
12258 |
1743-84 |
Cover plate Radio/TV/SAT |
SIN FAMILIA |
|
As cover for standard Radio/TV/SAT socket outlets.
With 2 connectors
DIN 45330.
Radio/TV/SAT.
With M3 fixing screw |
12258
|
1743-84
|
COVER PLATE RADIO/TV/SAT
|
SIN FAMILIA
|
|
|
12259 |
1746-84 |
Cover plate for data communication system |
SIN FAMILIA |
|
|
With hinged lid.
For telecommunication.
With cover plate 50 x 50 mm, AMP, Brand-Rex, Rutenbeck, BTR, Telegärtner, etc.
|
12259
|
1746-84
|
COVER PLATE FOR DATA COMMUNICATION SYSTEM
|
SIN FAMILIA
|
|
|
12260 |
1748-84 |
Cover plate with metal mounting plate |
SIN FAMILIA |
|
For covering universal data communication connectors and circular connectors with screwed plug M 16x0.75 (installable in insert) in accordance with DIN 41524, 41529, 45322, 45327, 45328 and 45329.
Knock-out openings 6, 8, 18 mm |
12260
|
1748-84
|
COVER PLATE WITH METAL MOUNTING PLATE
|
SIN FAMILIA
|
|
|
12261 |
1785-84 |
Switch rocker |
SIN FAMILIA |
|
|
For flush-mounted switch 2g 1w, 2g push switch. |
12261
|
1785-84
|
SWITCH ROCKER
|
SIN FAMILIA
|
|
|
12262 |
1786-84 |
Switch rocker |
SIN FAMILIA |
|
For flush-mounted switch 1g1w, 1g2w, intermediate, push switch. |
12262
|
1786-84
|
SWITCH ROCKER
|
SIN FAMILIA
|
|
|
12263 |
1794-84 |
Cover plate, for room thermostat. |
SIN FAMILIA |
|
For thermostat 1094 U, 1097 U |
12263
|
1794-84
|
COVER PLATE, FOR ROOM THERMOSTAT.
|
SIN FAMILIA
|
|
|
12264 |
1803-84 |
Covers for data communication system, Future Linear. |
SIN FAMILIA |
|
As cover for universal data connection boxes.
Art.-No. 0213 (Cat 3), 0216 (Cat 5), 8186/31 and comparable types from the company Rutenbeck.
Brand-Rex (WAEGV 8 EKR/EK).
BTR ( universal data connecting unit design and IAE design).
Telegärtner (AMJ 45, UMJ 45).
With down-leading outlet.
With labelling field.
Size of labelling field: 60.2 x 9.2 mm.
|
12264
|
1803-84
|
COVERS FOR DATA COMMUNICATION SYSTEM, FUTURE LINEAR.
|
SIN FAMILIA
|
|
|
12265 |
2000/5 US |
Rocker Switch Mechanism, 2gang 1way |
SIN FAMILIA |
|
Rated voltage: 250 V~
Rated current: 10 AX |
12265
|
2000/5 US
|
ROCKER SWITCH MECHANISM, 2GANG 1WAY
|
SIN FAMILIA
|
|
|
12266 |
2000/6 US |
Rocker Switch Mechanism, 1gang 2way |
SIN FAMILIA |
|
|
Rocker Switch Mechanism, 1gang 2way |
12266
|
2000/6 US
|
ROCKER SWITCH MECHANISM, 1GANG 2WAY
|
SIN FAMILIA
|
|
|
12267 |
2000/6/6 US-101 |
Rocker Switch Mechanism, 2 gang 2 way |
SIN FAMILIA |
|
|
Rocker Switch Mechanism, 2 gang 2 way |
12267
|
2000/6/6 US-101
|
ROCKER SWITCH MECHANISM, 2 GANG 2 WAY
|
SIN FAMILIA
|
|
|
12268 |
2000/7 US |
Rocker Switch Mechanism, 1gang intermediate |
SIN FAMILIA |
|
|
Rocker Switch Mechanism, 1gang intermediate |
12268
|
2000/7 US
|
ROCKER SWITCH MECHANISM, 1GANG INTERMEDIATE
|
SIN FAMILIA
|
|
|
12269 |
2020 US-201 |
Push Switch Mechanism, SP, with normally open contact (operating current). |
SIN FAMILIA |
|
|
Push Switch Mechanism, SP, with normally open contact (operating current). |
12269
|
2020 US-201
|
PUSH SWITCH MECHANISM, SP, WITH NORMALLY OPEN CONTACT (OPERATING CURRENT).
|
SIN FAMILIA
|
|
|
12270 |
20 EUC-84 |
SCHUKO® socket outlet |
SIN FAMILIA |
|
With screwless terminals.
DP (2 P + E)
Rated voltage: 250 V~
Rated current: 16 A
Connecting terminals approved in accordance with VDE 0620-1 as connectors. |
12270
|
20 EUC-84
|
SCHUKO® SOCKET OUTLET
|
SIN FAMILIA
|
|
|
12271 |
20 EW-54 |
SCHUKO® socket outlet, with hinged lid |
SIN FAMILIA |
|
With screwless terminals.
2 P + E,
Rated voltage: 250 V~
Rated current: 16 A
Protection class (Device): IP 44 |
12271
|
20 EW-54
|
SCHUKO® SOCKET OUTLET, WITH HINGED LID
|
SIN FAMILIA
|
|
|
12272 |
2601/6 W-54 |
Interruptor exterior, IP44, blanco alpino |
SIN FAMILIA |
|
Rated voltage: 250 V~
Rated current: 10 AX
Protection class (Device): IP 44
Label holder 1763-53.
Label holder illuminable with illumination insert 2152 NLI-53. |
12272
|
2601/6 W-54
|
INTERRUPTOR EXTERIOR, IP44, BLANCO ALPINO
|
SIN FAMILIA
|
|
|
12273 |
2621 W-54 |
Schalter/Taster, (IP 44) |
SIN FAMILIA |
|
|
Schalter/Taster, (IP 44) |
12273
|
2621 W-54
|
SCHALTER/TASTER, (IP 44)
|
SIN FAMILIA
|
|
|
12274 |
6543-84-101 |
Control element with neon lamp. |
SIN FAMILIA |
|
|
Can be combined with LED dimmer 6524 U, and 6526 U, Busch-Universal touch-type controller 6550 U-10x, Busch-Memory touch dimmer 6560 U-101, Busch-Universal-Dimmer® 6593 U, Busch-Universal relay insert 6401 U-10x, Busch-Universal 2gang insert 6402 U.
Compatible with previous type 6543-xxx.
Touch-type Controller 6550 U-xxx non-illuminable.
Replacement neon lamp 3857. |
12274
|
6543-84-101
|
CONTROL ELEMENT WITH NEON LAMP.
|
SIN FAMILIA
|
|
|
12275 |
6560 U-101 |
Busch-Memory touch-dimmer |
SIN FAMILIA |
|
With light-level memory and leading edge control.
For incandescent lamps, 230 V tungsten halogen lamps and low-volt halogen lamps with conventional transformer.
Compatible with control covers 6543-xxx-10x.
Operation also possible via conventional push buttons (2020 US, 2021/6 UK).
Parallel operation of several transformers and/or incandescents lamps possible.
Without control cover.
Rated voltage: 230 V~, +10% / -10%
Rated frequency: 50 Hz - 60 Hz
Rated power: 20 - 500 W/VA |
12275
|
6560 U-101
|
BUSCH-MEMORY TOUCH-DIMMER
|
SIN FAMILIA
|
|
|
12276 |
6179/01-204 |
Busch-Watchdog 220 MasterLINE KNX |
DETECTORS |
|
With 2 movement channels.
With 1 twilight channel with 3 switching thresholds.
No remote control possible via IR remote control KNX.
With integrated KNX bus coupler.
No additional power supply necessary.
Surveillance density: 92 sectors with 368 switching segments.
Twilight sensor: approx. 1 - 1000 lux
Switch-off delay: approx. 10 sec to 1092 min
Sensor angle: 220°
Range: approx. 16 m |
12276
|
6179/01-204
|
BUSCH-WATCHDOG 220 MASTERLINE KNX
|
DETECTORS
|
|
|
12662 |
20 EUC-79 |
SCHUKO socket-outlet insert |
SIN FAMILIA |
|
|
SCHUKO socket-outlet insert |
12662
|
20 EUC-79
|
SCHUKO SOCKET-OUTLET INSERT
|
SIN FAMILIA
|
|
|
12663 |
20 EUN-72 |
SCHUKO® socket outlets |
SIN FAMILIA |
|
DP (2 P + E)
Size of labelling field: 60.2 x 9.2 mm.
Rated voltage: 250 V~
Rated current: 16 A
Connecting terminals approved in accordance with VDE 0620-1 as connectors.
See labelling sheet 1799 xx. |
12663
|
20 EUN-72
|
SCHUKO® SOCKET OUTLETS
|
SIN FAMILIA
|
|
|
12670 |
20 EUK-72 |
SCHUKO® socket outlet with hinged lid |
SIN FAMILIA |
|
With screwless terminals.
DP (2 P + E)
Hinged lid notches when opened.
Rated voltage: 250 V~
Rated current: 16 A
Connecting terminals approved in accordance with VDE 0620-1 as connectors. |
12670
|
20 EUK-72
|
SCHUKO® SOCKET OUTLET WITH HINGED LID
|
SIN FAMILIA
|
|
|
12677 |
20 EUC-72 |
SCHUKO® socket outlet with screwless terminals. |
SIN FAMILIA |
|
|
SCHUKO® socket outlet with screwless terminals. |
12677
|
20 EUC-72
|
SCHUKO® SOCKET OUTLET WITH SCREWLESS TERMINALS.
|
SIN FAMILIA
|
|
|
12679 |
2021/6 U |
Push switch, SP, 1gang 2way without N-terminal |
SIN FAMILIA |
|
Suitable for impuls cover plate with operating knob.
Rated voltage: 250 V~
Rated current: 10 A
Replacement lamps 8360, 8362, and 8363 and LED inserts. |
12679
|
2021/6 U
|
PUSH SWITCH, SP, 1GANG 2WAY WITHOUT N-TERMINAL
|
SIN FAMILIA
|
|
|
12680 |
1789 KI-79 |
Cover plate, with operating knob and neon lamp. |
SIN FAMILIA |
|
With bell symbol.
For flush-mounted push switch.
Surface painted. |
12680
|
1789 KI-79
|
COVER PLATE, WITH OPERATING KNOB AND NEON LAMP.
|
SIN FAMILIA
|
|
|
12682 |
1803-72 |
Cover for universal data connection box |
SIN FAMILIA |
|
As cover for universal data connection boxes.
Art.-No. 0213 (Cat 3), 0216 (Cat 5), 8186/31 and comparable types from the company Rutenbeck.
Brand-Rex (WAEGV 8 EKR/EK).
BTR ( universal data connecting unit design and IAE design).
Telegärtner (AMJ 45, UMJ 45).
With down-leading outlet. |
12682
|
1803-72
|
COVER FOR UNIVERSAL DATA CONNECTION BOX
|
SIN FAMILIA
|
|
|
12684 |
1803-79 |
Cover for universal data connection box |
SIN FAMILIA |
|
As cover for universal data connection boxes.
Art.-No. 0213 (Cat 3), 0216 (Cat 5), 8186/31 and comparable types from the company Rutenbeck.
Brand-Rex (WAEGV 8 EKR/EK).
BTR ( universal data connecting unit design and IAE design).
Telegärtner (AMJ 45, UMJ 45).
With down-leading outlet. |
12684
|
1803-79
|
COVER FOR UNIVERSAL DATA CONNECTION BOX
|
SIN FAMILIA
|
|
|
12689 |
1803-02-72 |
Cover for universal data connection boxes, 2 gangs |
SIN FAMILIA |
|
As cover for universal data connection boxes.
Art. No. 0214, 0215 (Cat 3), 0220/12-507, 0221/12-507, 0218, 0217 (Cat 5e/6 data technology) and comparable types of the company Rutenbeck.
Brand-Rex (WAEGV 8/8 EKR/EK).
AMP (NETCONNECT 5E).
BTR (E-DAT C6, E-DAT design, Universal data connecting unit design and IAE design).
cti (cti-wire 2.8 Cat.6).
Telegärtner (AMJ 45, UMJ 45).
With down-leading outlet. |
12689
|
1803-02-72
|
COVER FOR UNIVERSAL DATA CONNECTION BOXES, 2 GANGS
|
SIN FAMILIA
|
|
|
12698 |
0230-101 |
Satellite co-axial outlets, 2 connectors/dead-end feeder |
SIN FAMILIA |
|
Broadband technology 5-2.400 MHz
For DVB-T and broadband-cable-systems.
For analogue and digital transmission.
With claw.
|
12698
|
0230-101
|
SATELLITE CO-AXIAL OUTLETS, 2 CONNECTORS/DEAD-END FEEDER
|
SIN FAMILIA
|
|
|
12699 |
1743-72 |
Cover plate As cover for standard Radio/TV/SAT socket outlets. |
SIN FAMILIA |
|
With 2 connectors
Acc. to German Standard DIN 45330.
With M3 fixing screw. |
12699
|
1743-72
|
COVER PLATE AS COVER FOR STANDARD RADIO/TV/SAT SOCKET OUTLETS.
|
SIN FAMILIA
|
|
|
12701 |
1743-79 |
Cover plate As cover for standard Radio/TV/SAT socket outlets. |
SIN FAMILIA |
|
With 2 connectors
Acc. to German Standard DIN 45330.
With M3 fixing screw. |
12701
|
1743-79
|
COVER PLATE AS COVER FOR STANDARD RADIO/TV/SAT SOCKET OUTLETS.
|
SIN FAMILIA
|
|
|
12706 |
1749-72 |
Cover plate |
SIN FAMILIA |
|
As cover for flex outlet, for cords up to 10.3 mm diameter.
With strain relief (without terminal block).
Cover plate can also be used individually as cover for telephone connector boxes (VDo). |
12706
|
1749-72
|
COVER PLATE
|
SIN FAMILIA
|
|
|
12981 |
8136/09-811 |
Busch-ComfortPanel 9" |
VISUALIZATION |
|
|
Free programmable IP/KNX touch display can be used as a control, infotainment and entertainment centre for the whole house
With a closed capacitative glass surface and a design strip made of stainless steel (brushed).
With integrated camera.
Easy control using intuitive navigation concept.
House control: switching, dimming, blinds, RTC, scene/sequences, timed controls
Entertainment: Multimedia, remote control RC5 and B&O.
Infotainment: IP telephony, RSS reader, intercom with picture, e-mail, voice and graphic memo, consumption data monitoring.
Door communication: Indoor station for the ABB-Welcome system in combination with IP gateway 83341.
Safety: video surveillance with IP cameras, alarm function, message function, presence simulation.
Representation from individual floor plans, room images and operation pages.
23 cm (9") Touch-display with 800 x 480 pixel
Compatible with ABB i-bus® KNX
Maintenance via remote control over IP.
Control with smartphones and tablets via the ComfortTouch App (Apple iOS /Google Android from Version 4). |
12981
|
8136/09-811
|
BUSCH-COMFORTPANEL 9"
|
VISUALIZATION
|
|
|
12983 |
6186/01 UP |
Power supply for Comfort Panel |
SYSTEM DEVICES |
|
Netzteil zur Spannungsversorgung für das ComfortPanel® 8136/09-… und 8136/12-….
Mit integrierter KNX Busankopplung zur Herstellung des lokalen Busanschlusses zum Busch-Installationsbus® KNX.
Mit integrierten Audioausgängen (LineOut).
Anschlüsse:
KNX-Linie: 2-polige Schraub-/Steckklemmen
Nennspannung: 110 V~ - 230 V~, +10% / -10%
Nennfrequenz: 50 Hz - 60 Hz
Schutzart Gerät: IP 20
Temperaturbereich Gerät: 0 °C bis 45 °C
Maße (H x B x T): 144, 5 mm x 140 mm x 43 mm
|
12983
|
6186/01 UP
|
POWER SUPPLY FOR COMFORT PANEL
|
SYSTEM DEVICES
|
|
|
12984 |
8136/01 UP |
Flush-mounted installation box for Busch-ComfortTouch® |
SIN FAMILIA |
|
For flush-mounted und hollow-wall installation of the Busch-ComfortTouch® 8136/09- ... , 8136/12- ... or the SMARTtouch.
Windproof.
Dimensions: (L x W x D): 163.5 mm x 199 mm x 60 mm
Mounting depth: 60 mm
|
12984
|
8136/01 UP
|
FLUSH-MOUNTED INSTALLATION BOX FOR BUSCH-COMFORTTOUCH®
|
SIN FAMILIA
|
|
|
13336 |
8202 |
Base station with RDS tuner, stereo, 2 channels |
SIN FAMILIA |
|
cFor setting up multi-room public address systems.
With integrated RDS tuner.
Reception frequency: 87.50 MHz - 108.00 MHz.
8 radio stations storable.
2 separate stereo audio channels.
1 additional channel for voice messages.
With intercom management function.
With 2 external AUX inputs.
For 4 Busch-AudioWorld® system amplifiers.
Extendable via the MDRC power supply unit 8209-101.
Rated voltage: 230 V~, +10% / -10%
Output voltage: 15 V-
Rated frequency: 50 Hz - 60 Hz
Rated current: 1.2 A
Protection class (Device): IP 20, SELV
Dimensions: (L x W x D): 53 mm x 203 mm x 201 mm |
13336
|
8202
|
BASE STATION WITH RDS TUNER, STEREO, 2 CHANNELS
|
SIN FAMILIA
|
|
|
13337 |
8209-101 |
MDRC power supply unit |
SIN FAMILIA |
|
For extending the maximum number of system amplifiers at one base station.
For 5 additional Busch-AudioWorld® system amplifiers.
Parallel connection possible to base station and to each other.
Can be used in "standalone" mode, i.e. without base station.
Rated voltage: 230 V~, +10% / -10%
Output voltage: 15 V-
Rated frequency: 50 Hz - 60 Hz |
13337
|
8209-101
|
MDRC POWER SUPPLY UNIT
|
SIN FAMILIA
|
|
|
13338 |
8214 U |
Intercom amplifier insert with display |
SIN FAMILIA |
|
Busch-AudioWorld® system amplifier.
For individual volume control.
For language announcements to 15 individual call zones.
With additional broadcast function
For switching between Busch-AudioWorld® system channel 1 and 2.
For switching of the central radio channel.
Optional deactivation of announcements (do not disturb).
For mono/stereo operation.
With noise control function.
With time display.
With alarm function.
With automatic switch-off function (automatic sleep mode).
With acoustic monitoring function (baby monitor).
Permitted speaker impedance: 8 - 16 Ohm
Rated voltage: 15 V-
Protection class (Device): IP 20, SELV
Mounting depth: 36 mm
No claw. Screw-fixing via keyholes.
|
13338
|
8214 U
|
INTERCOM AMPLIFIER INSERT WITH DISPLAY
|
SIN FAMILIA
|
|
|
13339 |
8221 U |
Loudspeaker insert 5cm (2") |
SIN FAMILIA |
|
For amplifier insert 8211 U.
For intercom amplifier inserts 8214 U.
For MDRC amplifier 8208.
For microphone console 8205.
With broadband characteristics.
With screwless terminals.
Rated output: 2 W (RMS)
Frequency response: 150 - 16, 000 Hz
Impedance: 16 Ohm
Protection class (Device): IP 20, SELV
Mounting depth: 34 mm
No claw. Screw-fixing via keyholes.
|
13339
|
8221 U
|
LOUDSPEAKER INSERT 5CM (2")
|
SIN FAMILIA
|
|
|
13340 |
8251-84 |
Audio-Video - Cover Plate |
SIN FAMILIA |
|
For amplifier insert 8211 U.
For intercom amplifier inserts 8214 U.
For audio input 8210 U.
For loudspeaker insert 8221 U.
Colours:
anthracite
ivory white
studio white |
13340
|
8251-84
|
AUDIO-VIDEO - COVER PLATE
|
SIN FAMILIA
|
|
|
13352
|
6349-825-101
|
BOTTOM END STRIP BUSCH- PRI ON®
|
SIN FAMILIA
|
|
|
13353 |
6346/12-101 |
Support frame, 3gang, Busch-priOn® |
PUSH BUTTONS |
|
Support frame for Busch-priOn®. The individual modules are fastened to the support frame by snapping them in. For 3.5" TFT display with rotary control element (6344-xxx), rotary control element (6341-xxx), 1gang control element (6340-xxx), 3gang control element (6342-xxx), standard top end strip (6348-xxx), standard bottom end strip (6349-xxx), top end strip with IR and proximity sensor (6350-xxx), and bottom end strip with temperature sensor end strip (6352-xxx).
For contacting with power bus coupler 6120/13.
For contacting with power mains coupler 6920/13.
Temperature range (Device): -5 °C to 45 °C
Dimensions: (L x W x D): 213 mm x 100 mm x 11 mm
|
13353
|
6346/12-101
|
SUPPORT FRAME, 3GANG, BUSCH-PRION®
|
PUSH BUTTONS
|
|
|
13375 |
6986/01 UP |
Modul Busch-Powernet® KNX for Busch-ComfortPanel® |
SIN FAMILIA |
|
|
Netzteil Modul Powernet KNX Netzteil zur Spannungsversorgung für das ComfortPanel® 8136/09-… und 8136/12-….
Mit integrierter KNX Busankopplung zur Herstellung des lokalen Busanschlusses zum Busch-Powernet® KNX.
Mit integrierten Audioausgängen (LineOut).
Nennspannung: 230 V~, +10% / -10%
Nennfrequenz: 50 Hz
Schutzart Gerät: IP 20
Temperaturbereich Gerät: 0 °C bis 45 °C
Maße (H x B x T): 144, 5 mm x 140 mm x 43 mm |
13375
|
6986/01 UP
|
MODUL BUSCH-POWERNET® KNX FOR BUSCH-COMFORTPANEL®
|
SIN FAMILIA
|
|
|
13398
|
6349-24G-101
|
BOTTOM END STRIP, BUSCH- PRI ON®
|
PUSH BUTTONS
|
|
|
13401 |
6354 U |
Switch actuator, 1gang, flush-mounted |
ACTUATORS - OUTPUTS |
|
Only with flush-mounted Powernet/bus coupler 6x20/13 and switch actuator/blind actuator 6920/40.
For switching incandescent lamps, 230 V tungsten halogen lamps, fluorescent lamps and low-voltage halogen lamps, that are actuated via transformers.
3 wire connection (neutral conductor required).
Can be used only in connection with support frame 2gang (6346/11-101) and 3gang (6346/12-101).
Not combinable with the bottom end strip with temperature sensor (6352-xxx-101).
Rated voltage: 230 V~, +10% / -10%
Rated frequency: 50 Hz
Outputs: 1 Normally open contact, potential-bound
Suitable for: ohmic, capacitive and inductive loads
Rated current: 10 AX
Rated power: 2300 W/VA
Protection class (Device): IP 20
Temperature range (Device): 0 °C to 35 °C
Dimensions: (L x W x D): 49 mm x 49 mm x 33 mm
Additional Power-Tool software necessary.
|
13401
|
6354 U
|
SWITCH ACTUATOR, 1GANG, FLUSH-MOUNTED
|
ACTUATORS - OUTPUTS
|
|
|
13402 |
6358-101 |
Power Supply, REG, 2500 mA SELV |
SYSTEM DEVICES |
|
Für Busch- priOn® Power-Busankoppler 6120/13.
Nennspannung: 230 V, +10% / -15%
Ausgangsspannung: 24 V-, +1% / -1%
Nennfrequenz: 50 Hz - 60 Hz
Nennstrom: 2500 mA
Schutzart Gerät: IP 20
Temperaturbereich Gerät: -5 °C bis 45 °C
Maße (H x B x T): 90 mm x 72 mm x 64 mm
Einbautiefe: 68 mm
Teilungseinheit: 4 TE
1 TE ? 18 mm.
|
13402
|
6358-101
|
POWER SUPPLY, REG, 2500 MA SELV
|
SYSTEM DEVICES
|
|
|
13407 |
6196/22-102 |
2-fold blind actuator with movement duration -102 |
ACTUATORS - OUTPUTS |
|
|
230 V , 50 Hz, 2 x 6 A For controlling 2 independent blind groups. With calculation of movement duration. |
13407
|
6196/22-102
|
2-FOLD BLIND ACTUATOR WITH MOVEMENT DURATION -102
|
ACTUATORS - OUTPUTS
|
|
|
13408 |
6196/23-102 |
Roller blind actuator, 2-fold |
ACTUATORS - OUTPUTS |
|
|
230 V , 50 Hz, 2 x 6 A For controlling 2 independent groups of roller blinds. |
13408
|
6196/23-102
|
ROLLER BLIND ACTUATOR, 2-FOLD
|
ACTUATORS - OUTPUTS
|
|
|
15908 |
1722-811 |
Cover frame 2 fold |
PUSH BUTTONS |
|
|
Für senkrechte oder waagerechte montage |
15908
|
1722-811
|
COVER FRAME 2 FOLD
|
PUSH BUTTONS
|
|
|
16669 |
0218/11-101 |
Data-connection box, RJ 45, cat. 6a iso, shielded 1 gang |
PUSH BUTTONS |
|
With down-leading outlet and LSA self-cutting clamps.
RJ-45 terminals for networks according to Cat 6A, Class EA (10 Gbits/s / 500MHz).
Equates to cat. 6a, Class EA according to ISO/IEC 11801:2011-06.
Terminal marking A and B according to TIA/EIA-568-B.2.
Typ according to EN 60 603-7-51:2011-01.
Shielding according to DIN EN 55022, Class B.
Up to 500 MHz on all pairs of wires.
Suitable for 10-Gigabit Ethernet.
Suitable for PoE+ according to IEEE 802.3at, >- 1.000 contact durability.
Flex cable entries from all sides without buckles.
Earthing of housing via 6,3 mm blade terminal at the back possible.
Re-embedded proofed.
Suitable for Mix-and-Match operation.
Suitable for RJ 11, RJ 12 und RJ 45.
For data cables with a diameter of 6 -10 mm.
For wires of AWG 24-22.
For trunk systems, flush-mounted wall boxes and underfloor systems.
Without claws.
Mounting depth: 31 mm. |
16669
|
0218/11-101
|
DATA-CONNECTION BOX, RJ 45, CAT. 6A ISO, SHIELDED 1 GANG
|
PUSH BUTTONS
|
|
|
16670 |
1095 UTA |
Room thermostat |
SIN FAMILIA |
|
|
With actual value temperature display
Automatic controller calibration
Switch contact opens when the set temperature is reached.
with built-in slide switch and control lamp for nightly reduction of 4 K
with fixing claws
separate terminal to activate nighttime mode and reduction of room temperature by 4K.. Rated voltage: 230 V~
Rated current: 10 A
Temperature range (Device): 5 °C to 30 °C
Only in conjunction with standard flush-mounting boxes according to DIN 49073, Part 1, erect or Busch-Jaeger No. 3040 wallbox stonework, 3050 wallbox cavity wall or 3060 wallbox concrete)
Servo-valves, "closed when de-energized", are necessary for connection to thermostat. e.g. Article No. 6164/10-, see KNX chapter.
Switching temperature difference: ± 0.5 K. |
16670
|
1095 UTA
|
ROOM THERMOSTAT
|
SIN FAMILIA
|
|
|
16674 |
1766-82 |
Cover plate |
OTHER ACCESSORIES |
|
|
For telephone connection unit. For USB, VGA, HDMI inserts and communication adapter.
USB power adapter insert 6472 U.
For loudspeaker connection box.
Suitable for part number 0248/0x-101.
For data modules.
Suitable for Art. No. 0219/12 and 0219/13.
For modular outlets with 90° RJ45 outlet from Telegärtner (type MJ and WE).
|
16674
|
1766-82
|
COVER PLATE
|
OTHER ACCESSORIES
|
|
|
16676 |
1785 JA-84 |
Rocker, 2 gang, shutter serigraphy |
SIN FAMILIA |
|
|
For flush-mounted switch 2g 1w, 2g push switch. |
16676
|
1785 JA-84
|
ROCKER, 2 GANG, SHUTTER SERIGRAPHY
|
SIN FAMILIA
|
|
|
16677 |
1795 TA-84 |
Cover plate |
OTHER ACCESSORIES |
|
|
Control elements for room temperature controllers Cover plate for room thermostat With sliding switch for nightly room temperature reduction. For room thermostats 1095 UTA, 1096 UTA. |
16677
|
1795 TA-84
|
COVER PLATE
|
OTHER ACCESSORIES
|
|
|
16681 |
2000/4 us |
Blind switch insert SP, switch |
PUSH BUTTONS |
|
|
With interlock. Rated voltage: 250 V~
Rated current: 10 AX
Only in conjunction with standard flush-mounting boxes according to DIN 49073, Part 1, erect or Busch-Jaeger No. 3040 wallbox stonework, 3050 wallbox cavity wall or 3060 wallbox concrete)
These blind switches/push buttons safely prevent a switch-over of the running direction being carried out too quickly.
|
16681
|
2000/4 US
|
BLIND SWITCH INSERT SP, SWITCH
|
PUSH BUTTONS
|
|
|
16683 |
20 EUGK-34-101 |
SCHUKO® socket outlet with hinged lid |
OTHER ACCESSORIES |
|
|
Delivered with sealing ring.
IP 44 only in conjunction with cover frames All Weather 44.
With screwless terminals.
DP (2 P + E) Rated voltage: 250 V~
Rated current: 16 A
Protection class (Device): IP 44
|
16683
|
20 EUGK-34-101
|
SCHUKO® SOCKET OUTLET WITH HINGED LID
|
OTHER ACCESSORIES
|
|
|
16684 |
2101-31 |
Cover frame 1gang frame |
PUSH BUTTONS |
|
IP 44 only in connection with a switch cover, cover plate, etc. of program All Weather 44.
Protection class (Device): IP 44 |
16684
|
2101-31
|
COVER FRAME 1GANG FRAME
|
PUSH BUTTONS
|
|
|
16689 |
2102-31 |
Cover frame 2 gang |
PUSH BUTTONS |
|
IP 44 only in connection with a switch cover, cover plate, etc. of program All Weather 44.
Protection class (Device): IP 44 |
16689
|
2102-31
|
COVER FRAME 2 GANG
|
PUSH BUTTONS
|
|
|
16694 |
2106-31 |
Covers for switches/push-buttons |
PUSH BUTTONS |
|
|
For flush-mounted switch 1g1w, 1g2w, intermediate, push switch.
screwable (fixing element)
Delivered with sealing ring.
IP 44 only in conjunction with cover frames All Weather 44.
Protection class (Device): IP 44
|
16694
|
2106-31
|
COVERS FOR SWITCHES/PUSH-BUTTONS
|
PUSH BUTTONS
|
|
|
16699 |
2126-31 |
Rocker with marking |
PUSH BUTTONS |
|
As cover for flush mounted blind control switch/push switch.
screwable (fixing element)
Delivered with sealing ring.
For inserts 2000/4 and 2020/4 US.
IP 44 only in conjunction with cover frames All Weather 44. |
16699
|
2126-31
|
ROCKER WITH MARKING
|
PUSH BUTTONS
|
|
|
16701 |
2126-33 |
Rocker with marking |
PUSH BUTTONS |
|
As cover for flush mounted blind control switch/push switch.
screwable (fixing element)
Delivered with sealing ring.
For inserts 2000/4 and 2020/4 US.
IP 44 only in conjunction with cover frames All Weather 44. |
16701
|
2126-33
|
ROCKER WITH MARKING
|
PUSH BUTTONS
|
|
|
16704 |
83121/1-664 |
Outdoor video station, 1gang front plate steel, surface is coated white |
VIDEO DOOR ENTRY SYSTEM |
|
Front plate made of 3 mm steel.
Video camera with automatic day/night switchover and infrared LEDs to illuminate the night shots.
Communication unit and key module are backlit.
Stamped labelling foil is enclosed.
Mounting tool is enclosed.
For flush-mounted installation with 83402 U-689-500.
For surface-mounted installation with 83402 AP-689-500.
Vertical/horizontal detection angle: 86°/67°
Setting angle horizontal/vertical: +/-15°, mechanically adjustable
Consumer units: 8
Protection class (Device): IP 44
Temperature range (Device): -25 °C to 55 °C
Dimensions: (L x W x D): 277 mm x 135 mm x 43 mm |
16704
|
83121/1-664
|
OUTDOOR VIDEO STATION, 1GANG FRONT PLATE STEEL, SURFACE IS COATED WHITE
|
VIDEO DOOR ENTRY S...
|
|
|
16705 |
83220 AP-624 |
Indoor video station with 17.8 cm (7") touch display |
VIDEO DOOR ENTRY SYSTEM |
|
|
Display of the video image of the outdoor station. During the conversation a picture of the visitor can be taken and stored in the picture memory.
For door calls during absence three pictures of the visitor are automatically stored in the picture memory.
With hands-free function, volume is adjustable.
Easy operation keys for door openers, mute function and light.
Different bell sounds are adjustable for door and floor ringing; five polyphone bell sounds are available.
Volume of bell sounds is adjustable.
For surface mounting.
SD card slot for extension of the picture memory.
Display size: 17.8 cm (7'')
Display resolution: 800 x 480
Consumer units: 11 Protection class (Device): IP 30
Temperature range (Device): -5 °C to 40 °C Dimensions: (L x W x D): 155 mm x 218 mm x 29 mm |
16705
|
83220 AP-624
|
INDOOR VIDEO STATION WITH 17.8 CM (7") TOUCH DISPLAY
|
VIDEO DOOR ENTRY S...
|
|
|
16708 |
83300 |
System controller, MDRC |
VIDEO DOOR ENTRY SYSTEM |
|
|
Supply device and controller of the ABB-Welcome system.
For connecting the indoor and outdoor busline.
With output for electrical door opener for 12V~, 1,6A or potential-free output 30V, 3A.
With output to control hall light directly or via relais (230V, 3A).
Switching time duration of the door opener and the light is adjustable.
For up to 65 consumer units. Rated voltage: 230 V~, +10 % / -10 %
Output voltage: 28 V
Rated frequency: 50 Hz - 60 Hz
Rated power: 42 W
Protection class (Device): IP 20
Temperature range (Device): -5 °C to 45 °C
Dimensions: (L x W x D): 90 mm x 216 mm x 65 mm
Module width: 12 MW |
16708
|
83300
|
SYSTEM CONTROLLER, MDRC
|
VIDEO DOOR ENTRY S...
|
|
|
16709 |
83335 U |
Switch actuator, flush-mounted for mounting in flush-mounted wall box |
VIDEO DOOR ENTRY SYSTEM |
|
Switch actuator for connection to the door communication bus.
Activates connected loads during an incoming door call (e.g. an external gong).
Floating output: 230 V, 3 AX.
Consumer units: 1
Protection class (Device): IP 20
Temperature range (Device): -5 °C to 45 °C
Dimensions: (L x W x D): 51 mm x 51 mm x 28 mm |
16709
|
83335 U
|
SWITCH ACTUATOR, FLUSH-MOUNTED FOR MOUNTING IN FLUSH-MOUNTED WALL BOX
|
VIDEO DOOR ENTRY S...
|
|
|
16710 |
83402 U-681 |
Flush-mounted installation box, size 1/3 |
VIDEO DOOR ENTRY SYSTEM |
|
For flush-mounted installation of ABB-Welcome outdoor station.
Installation dimensions (H x W x D): 260 mm x 108 mm x 40 mm
Protection class (Device): IP 44
Temperature range (Device): -25 °C to 55 °C
Dimensions: (L x W x D): 275 mm x 133 mm x 46 mm |
16710
|
83402 U-681
|
FLUSH-MOUNTED INSTALLATION BOX, SIZE 1/3
|
VIDEO DOOR ENTRY S...
|
|
|
17082 |
2622 N-101 |
Tastersymbol |
SIN FAMILIA |
|
Für die Progamme ocean® und Allwetter 44®
Schutzart Gerät: IP 44 |
17082
|
2622 N-101
|
TASTERSYMBOL
|
SIN FAMILIA
|
|
|
17397 |
1721-866K |
Frame 1 fold, stainless steel |
PUSH BUTTONS |
|
|
Frame 1 fold, stainless steel |
17397
|
1721-866K
|
FRAME 1 FOLD, STAINLESS STEEL
|
PUSH BUTTONS
|
|
|
17417 |
6109/03-866 |
Cover plate for room temperature controller or room temperature controller with CO2/moisture pure stainless steel |
SIN FAMILIA |
|
|
Cover plate for room temperature controller or room temperature controller with CO2/moisture pure stainless steel |
17417
|
6109/03-866
|
COVER PLATE FOR ROOM TEMPERATURE CONTROLLER OR ROOM TEMPERATURE CONTROLLER WITH CO2/MOISTURE PURE STAINLESS STEEL
|
SIN FAMILIA
|
|
|
17418 |
6109/28 |
Room temperature controller with CO2/moisture sensor Heating/cooling operation |
SIN FAMILIA |
|
|
Control element with room temperature controller function and CO2/moisture/air pressure sensor.
For activating heating, ventilation and fan coil actuators.
With universal input with max. of 5 binary inputs - 4 binary inputs and 1 analogue input for activating sensors with external power supply 1-10 V/0-10 V
- 2 binary inputs and 1 analogue input for activating sensors with external power supply 1-10 V/0-10 V and an external temperature sensor PT1000 / T6226.
With display of set-value temperature.
Master/slave configuration.
With base-load operation.
Class of temperature controller 1
Contribution to space heating energy efficiency 1,0%.
Control element: Switch contacts
Display elements: LCD showing operation mode and temperature.
Connections:
KNX-line: Bus connection terminal
Rated voltage: 24 V
Inputs: 5
Polling voltage: , Binary inputs, presence and/or window contact
Rated current: 5 mA
Control/Signal outputs: 1, 0-10 V (passive)
Protection class (Device): IP 20
Temperature range (Device): -5 °C to 45 °C
For software and description please check the current Online-Catalogue.
From ETS 4: commissioning via native ETS application
|
17418
|
6109/28
|
ROOM TEMPERATURE CONTROLLER WITH CO2/MOISTURE SENSOR HEATING/COOLING OPERATION
|
SIN FAMILIA
|
|
|
17419 |
1721-860 |
Cover frame 1 gang |
PUSH BUTTONS |
|
|
Cover frame 1 gang |
17419
|
1721-860
|
COVER FRAME 1 GANG
|
PUSH BUTTONS
|
|
|
18086 |
6131/20-24 |
KNX Mini presence sensor |
SENSORS |
|
|
Detection range (for mounting 2.5 m, 3 m and 4 m high): circular. Sitting people Ø: max. 5 m, maximum. 6.5 m and max. People 9 m. On foot Ø: max. 6.5 m, maximum. 8 m and the maximum. 10.5 m. Visible height 16 mm. With 2 channels. Intended for the connection and disconnection of bands of lights depending on the luminosity of the room. Regulation in response to possible movement. Using the device as presence or motion detectors. Application of detectors with power 2 stages. Application of detectors with integrated control function. Constant light switch with up to two independent channels. Constant light switch with max. 2 outputs for brightness dependent switching of two light bands in the area. With integrated KNX bus coupler. Suitable for false ceilings with a board thickness of 9 to 25 mm. Hole size: Ø 68 mm. Suitable for surface mount installation. Can not be installed in British Standard or VDE recess box. |
18086
|
6131/20-24
|
KNX MINI PRESENCE SENSOR
|
SENSORS
|
|
|
19224 |
6136/27-811 |
Mounting frame for surface mounting for Busch-SmartTouch 7 " |
VISUALIZATION |
|
|
Dimensions: (L x W x D): 166 m x 244 mm x 13 mm |
19224
|
6136/27-811
|
MOUNTING FRAME FOR SURFACE MOUNTING FOR BUSCH-SMARTTOUCH 7 "
|
VISUALIZATION
|
|
|
19226 |
6136/07 UP |
Flush-mounted or hollow wall mounting box for Busch-SmartTouch 7 " |
VISUALIZATION |
|
For flush-mounted und hollow-wall installation of the Busch-SmartTouch 7" 6136/07-8xx.
Windproof.
Installation dimensions, flush-mounted, (H x W x D): 152 mm x 235 mm x 60 mm
Installation dimensions for hollow wall (H x W x D): 146 mm x 227 mm x 50 mm. |
19226
|
6136/07 UP
|
FLUSH-MOUNTED OR HOLLOW WALL MOUNTING BOX FOR BUSCH-SMARTTOUCH 7 "
|
VISUALIZATION
|
|
|
19230 |
6197/14-101 |
Universal dimming actuator 6x 315 W |
ACTUATORS - OUTPUTS |
|
|
Universal dimming actuator 6x 315 W / VA up to 1x 1890 W / VA, bus installation bus KNX, REG universal dimming actuators, universal dimming actuator 6x 315 W / VA up to 1x 1890 W / VA 1-6-fold multi-channel universal dimmer actuator for control of incandescent lamps, 230 V halogen incandescent lamps, low-voltage halogen lamps with conventional or electronic transformers and dimmable halogen energy-saving lamps. |
19230
|
6197/14-101
|
UNIVERSAL DIMMING ACTUATOR 6X 315 W
|
ACTUATORS - OUTPUTS
|
|
|
19256 |
0218/12-101 |
UAE junction box, RJ45, Cat. 6a iso, shielded |
OTHER ACCESSORIES |
|
UAE junction box, RJ45, Cat. 6a iso, shielded 1)
2 sockets, 8/8-pin
With inclined outlet and LSA insulation displacement terminals.
RJ-45 connectors for Cat. 6A, Class EA
(10 Gbps / 500 MHz).
Corresponds to Cat. 6A, Class EA acc. ISO / IEC 11801: 2011-06.
Connection marking A and B according to
TIA / EIA-568-B.2.
Design according to EN 60 603-7-51: 2011-01.
Shielding according to DIN EN 55022, class B.
Up to 500 MHz on all wire pairs.
Suitable for 10 Gigabit Ethernet.
Suitable for PoE + according to IEEE 802.3at, = 1000 mating cycles.
Flexible cable feed without kinks from all sides.
Housing ground using 6.3 mm flat connector
possible on the back side.
Re-embedded tested.
Suitable for mix-and-match use.
Suitable for RJ 11, RJ 12 and RJ 45 connectors.
For data cables with a diameter of 6-10 mm.
For mounting in cable ducts, flush-mounted boxes and
Underfloor systems.
For wires from AWG 24-22.
Without strut.
Installation depth 31 mm. |
19256
|
0218/12-101
|
UAE JUNCTION BOX, RJ45, CAT. 6A ISO, SHIELDED
|
OTHER ACCESSORIES
|
|
|
19257 |
6180/17 |
640mA KNX power supply |
SYSTEM DEVICES |
|
Connections:
KNX Line
Rated voltage: 230 V ~, + 10% / -15%
Secondary: 30 V + 1 V / -2 V
Nominal frequency: 50Hz / 60Hz
Outputs: 2 short-circuit proof
Rated current: 640 mA
Degree of Protection: IP 20
Operating temperature: -5 ° C to 45 ° C
Dimensions (H x W x D): 90 x 72 x 64 mm |
19257
|
6180/17
|
640MA KNX POWER SUPPLY
|
SYSTEM DEVICES
|
|
|
19258 |
1803-02-866 |
cover for junction boxes.With sloping outlet.stainless steel |
OTHER ACCESSORIES |
|
|
cover for junction boxes.With sloping outlet.stainless steel |
19258
|
1803-02-866
|
COVER FOR JUNCTION BOXES.WITH SLOPING OUTLET.STAINLESS STEEL
|
OTHER ACCESSORIES
|
|
|
19259 |
6194/27 |
Switch Actuator 8 channels, 16A |
ACTUATORS - OUTPUTS |
|
8-fold switching actuator
Potential-free contacts can be parameterized as normally closed or normally open.
Manual "on-site operation" possible.
Switching status display of the contacts
The bus connection is made via the enclosed bus terminal.
Controls: Manual operation for ON / OFF via slide switch
Display elements: Status display of the outputs via position of the slide switch
Connections:
KNX line: bus connection terminal
Rated voltage: 230 V ~, + 10% / -15%
Rated frequency: 50 Hz / 60 Hz
Outputs: 8 NO contacts, potential-free
Load type: AC1
Rated current: 16 A, cos f0.8
Output voltage: 230 V ~
Load type: AC3
Rated current: 8 A, cos f0.45
Output voltage: 230 V ~
Degree of protection device: IP 20
Temperature range Device: -5 ° C to 45 ° C
Dimensions (H x W x D): 90 mm x 144 mm x 64 mm
Installation depth: 68 mm
Division: 8 TE |
19259
|
6194/27
|
SWITCH ACTUATOR 8 CHANNELS, 16A
|
ACTUATORS - OUTPUTS
|
|
|
19260 |
1803-866 |
cover for RJ45 pure stainless steel |
OTHER ACCESSORIES |
|
|
cover for RJ45 pure stainless steel |
19260
|
1803-866
|
COVER FOR RJ45 PURE STAINLESS STEEL
|
OTHER ACCESSORIES
|
|
|
19261 |
20 EUC-866 |
SCHUKO socket insert, stainless steel, pure stainless steel, sockets |
OTHER ACCESSORIES |
|
|
SCHUKO socket insert, stainless steel, pure stainless steel, sockets |
19261
|
20 EUC-866
|
SCHUKO SOCKET INSERT, STAINLESS STEEL, PURE STAINLESS STEEL, SOCKETS
|
OTHER ACCESSORIES
|
|
|
19262 |
1722-866K |
Cover frame, stainless steel |
OTHER ACCESSORIES |
|
|
Cover frame, stainless steel |
19262
|
1722-866K
|
COVER FRAME, STAINLESS STEEL
|
OTHER ACCESSORIES
|
|
|
19265 |
1723-866K |
triple stainless steel frame anti traces |
OTHER ACCESSORIES |
|
|
triple stainless steel frame anti traces |
19265
|
1723-866K
|
TRIPLE STAINLESS STEEL FRAME ANTI TRACES
|
OTHER ACCESSORIES
|
|
|
19266 |
1724-866K |
Pure stainless steel cover frame, 4-fold, anti-fingerprint, stainless steel |
OTHER ACCESSORIES |
|
|
Pure stainless steel cover frame, 4-fold, anti-fingerprint, stainless steel |
19266
|
1724-866K
|
PURE STAINLESS STEEL COVER FRAME, 4-FOLD, ANTI-FINGERPRINT, STAINLESS STEEL
|
OTHER ACCESSORIES
|
|
|
19439 |
1786-866 |
Rocker, stainless steel, pure stainless steel, covers for switches / buttons |
OTHER ACCESSORIES |
|
The cover 1786-866 (manufacturer number: 1751-0-2956) of Busch-Jaeger is an offer from the extensive range of HAGEMEYER.
Important facts for you at a glance:
Halogen free: yes
Material: metal
Color: stainless steel colors
Manufacturer color: Stainless steel colors
Surface: matt
clamp |
19439
|
1786-866
|
ROCKER, STAINLESS STEEL, PURE STAINLESS STEEL, COVERS FOR SWITCHES / BUTTONS
|
OTHER ACCESSORIES
|
|
|
19680 |
6108/06-AP |
6108/06-AP, pushbutton connection 2-fold for ocean, bus installation bus KNX, push-button coupling KNX |
PUSH BUTTONS |
|
6108/06-AP, pushbutton connection 2-fold for ocean, bus installation bus KNX, push-button coupling KNX |
19680
|
6108/06-AP
|
6108/06-AP, PUSHBUTTON CONNECTION 2-FOLD FOR OCEAN, BUS INSTALLATION BUS KNX, PUSH-BUTTON COUPLING KNX
|
PUSH BUTTONS
|
|
|
19681 |
1786-884 |
1786-884, rocker, studio white matt, future linear, covers for switches / buttons |
PUSH BUTTONS |
|
1786-884, rocker, studio white matt, future linear, covers for switches / buttons |
19681
|
1786-884
|
1786-884, ROCKER, STUDIO WHITE MATT, FUTURE LINEAR, COVERS FOR SWITCHES / BUTTONS
|
PUSH BUTTONS
|
|
|
19682 |
6108/07-AP |
6108/07-AP, push-button connection 4-fold for ocean, bus installation bus KNX, push-button coupling KNX |
PUSH BUTTONS |
|
6108/07-AP, push-button connection 4-fold for ocean, bus installation bus KNX, push-button coupling KNX |
19682
|
6108/07-AP
|
6108/07-AP, PUSH-BUTTON CONNECTION 4-FOLD FOR OCEAN, BUS INSTALLATION BUS KNX, PUSH-BUTTON COUPLING KNX
|
PUSH BUTTONS
|
|
|
19683 |
1785-884 |
1785-884, rocker, studio white matt, future linear, covers for switches / buttons |
PUSH BUTTONS |
|
1785-884, rocker, studio white matt, future linear, covers for switches / buttons |
19683
|
1785-884
|
1785-884, ROCKER, STUDIO WHITE MATT, FUTURE LINEAR, COVERS FOR SWITCHES / BUTTONS
|
PUSH BUTTONS
|
|
|
19684 |
20 EUC-884 |
20 EUC-884, SCHUKO socket outlet, studio white matt, future linear, sockets |
OTHER ACCESSORIES |
|
20 EUC-884, SCHUKO socket outlet, studio white matt, future linear, sockets |
19684
|
20 EUC-884
|
20 EUC-884, SCHUKO SOCKET OUTLET, STUDIO WHITE MATT, FUTURE LINEAR, SOCKETS
|
OTHER ACCESSORIES
|
|
|
19685 |
1803-884 |
1803-884, Zentralscheibe, studioweiß matt, future linear, Abdeckungen für Datenkommunikation |
OTHER ACCESSORIES |
|
1803-884, central disc, studio white matt, future linear, covers for data communication |
19685
|
1803-884
|
1803-884, ZENTRALSCHEIBE, STUDIOWEIß MATT, FUTURE LINEAR, ABDECKUNGEN FÜR DATENKOMMUNIKATION
|
OTHER ACCESSORIES
|
|
|
|
19686 |
0216-102 |
0216-102, UAE junction box, RJ45, Cat. 6e, shielded, data communication, UAE junction boxes |
OTHER ACCESSORIES |
|
0216-102, UAE junction box, RJ45, Cat. 6e, shielded, data communication, UAE junction boxes |
19686
|
0216-102
|
0216-102, UAE JUNCTION BOX, RJ45, CAT. 6E, SHIELDED, DATA COMMUNICATION, UAE JUNCTION BOXES
|
OTHER ACCESSORIES
|
|
|
|
19688 |
1743-884 |
1743-884, central disc, studio white matt, future linear, covers for data communication |
OTHER ACCESSORIES |
|
|
1743-884, central disc, studio white matt, future linear, covers for data communication |
19688
|
1743-884
|
1743-884, CENTRAL DISC, STUDIO WHITE MATT, FUTURE LINEAR, COVERS FOR DATA COMMUNICATION
|
OTHER ACCESSORIES
|
|
|
|
19689 |
1721-884K |
1721-884K, future linear-Abdeckrahmen, studioweiß matt, future linear, Rahmen future linear |
OTHER ACCESSORIES |
|
1721-884K, future linear-Abdeckrahmen, studioweiß matt, future linear, Rahmen future linear |
19689
|
1721-884K
|
1721-884K, FUTURE LINEAR-ABDECKRAHMEN, STUDIOWEIß MATT, FUTURE LINEAR, RAHMEN FUTURE LINEAR
|
OTHER ACCESSORIES
|
|
|
|
19690 |
1723-884K |
FRAME 3 ELEMENTS, FUTURE LINEAR, WHITE |
OTHER ACCESSORIES |
|
FRAME 3 ELEMENTS, FUTURE LINEAR, WHITE
ALPINO MATE - BUSCH-JAEGER - REF: 1723-884K |
19690
|
1723-884K
|
FRAME 3 ELEMENTS, FUTURE LINEAR, WHITE
|
OTHER ACCESSORIES
|
|
|
|
19691 |
1724-884K |
FRAME 4 ELEMENTS, FUTURE LINEAR, WHITE |
OTHER ACCESSORIES |
|
FRAME 4 ELEMENTS, FUTURE LINEAR, WHITE
ALPINE |
19691
|
1724-884K
|
FRAME 4 ELEMENTS, FUTURE LINEAR, WHITE
|
OTHER ACCESSORIES
|
|
|
|
19693 |
1722-884K |
1722-884K future linear-Abdeckrahmen, studioweiß matt, future linear, Rahmen future linear |
OTHER ACCESSORIES |
|
future linear-Abdeckrahmen, studioweiß matt, future linear, Rahmen future linear |
19693
|
1722-884K
|
1722-884K FUTURE LINEAR-ABDECKRAHMEN, STUDIOWEIß MATT, FUTURE LINEAR, RAHMEN FUTURE LINEAR
|
OTHER ACCESSORIES
|
|
|
|
19785 |
VCO/S99.1 |
Busch-VoiceControl VCO/S99.1 KNX voice control gateway |
GATEWAYS |
|
Busch-VoiceControl ® KNX offers the option of completely controlling the building via voice
commands with the digital voice assistants Apple HomeKit, Amazon Alexa and Google
Assistant.
The KNX voice control gateway makes possible the simple and direct operation of switches,
dimmers, blinds or thermostats via voice. The control of the sensors is carried out via the
coupling with a voice control system, e.g. Apple HomeKit. The voice commands are transmitted
via a direct KNX connection. This system remembers the status of the connected sensors. This
allows them to be controlled via voice command.
Commissioning and parameterization is carried out web-based via MyBuildings Portal. Existing
KNX group addresses from the ETS can be imported into a Busch-VoiceControl ® project. Also
adjustments of the device settings are made via the portal and then automatically loaded into
the MDRC device. These adjustments are then available immediately. This means that all data
are available at the personal access of the MyBuildings PortalInternet portal. The direct
activation is carried out via a safe Internet connection.
The system configuration is saved on a central server and is downloaded from the KNX KNX
voice control gateway. |
19785
|
VCO/S99.1
|
BUSCH-VOICECONTROL VCO/S99.1 KNX VOICE CONTROL GATEWAY
|
GATEWAYS
|
|
|
19900 |
83320/2 U |
83320/2 U, indoor video distribution, door communication, system devices |
OTHER ACCESSORIES |
|
83320/2 U, indoor video distribution, door communication, system devices
Video distributor indoor flush-mounted, door communication, system devices, video distributor indoor flush-mounting for installation in a flush-mounted box For distributing the video signal in the case of line branching (eg in a riser). Degree of protection Device: IP 20 Temperature range Device: -5 ° C to 45 ° C Dimensions (H x W x D): 45 mm x 53 mm x 20 mm |
19900
|
83320/2 U
|
83320/2 U, INDOOR VIDEO DISTRIBUTION, DOOR COMMUNICATION, SYSTEM DEVICES
|
OTHER ACCESSORIES
|
|
|
20070 |
20 EUC-81 |
SHUCKO ANTRACITE |
OTHER ACCESSORIES |
|
|
SHUCKO ANTRACITE |
20070
|
20 EUC-81
|
SHUCKO ANTRACITE
|
OTHER ACCESSORIES
|
|
