Order by:   Filter results: 
Web Code Reference Description Category Price
10757 10104 Gateway eibPort LAN Ver. 3 VISUALIZATION
Automation and visualization gateway for your building control

EIBPORT device connects your building control with Ethernet and Home-Entertainment. Thereby I have used as desired different techniques. Besides KNX / Powernet KNX TP and the EnOcean radio system or an optional GSM radio connection is available. Through the network interface, it is e.g. Possible to switch to beamer or start the preferred mp3 playlist by using a pushbutton. Furthermore, the eibPort provides an excellent visualization and automation of the whole building control.

The setup of the device is as simple as it is intuitive. The access to the building control can be realized locally or via remote access by PC, Laptop, Tablet or Smart Phone. The only thing required is a standard Internet browser.

Integrated services allow to implement self-acting functionalities as timer function, scenes, logical functions etc without starting an additional visualization (even in case of overlapping address ranges). For monitoring purposes network cameras can be integrated into the visualization. Messages (e.g. faults, housebreaking alarms) are sent to the email and / or SMS to your mobile phone. With the help of the service for distributed installation coupling properties are centrally merged (even when overlapping addresses). Remote programming of EIB / KNX- devices via ETS is possible too. The device is mounted in a common power distribution cabinet.

The power consumption is less than 5W.

Additional EIBPORT Version 3 is equipped with 1-Wire and four S0-Terminals. The S0 interfaces enable the direct integration of corresponding counter. Internal interfaces are supported by a service that converts the pulses to a counter. The 1-Wire connection takes place over the USB port. 1-Wire is characterized by low sensors of the presence and temperature. Especially in combination with the integrated RTR service of EIBPORT the solution leads to interesting scenarios
10757
10104 GATEWAY EIBPORT LAN VER. 3 VISUALIZATION
11312 12021 DUODMX GATEWAY KNX GATEWAYS

DUODMX GATEWAY KNX - 12021

The DUO DMX GATEWAY KNX can be controlled via KNX/TP and the free native application "DUO DMX APP" (APP for iOS® and Android®). It is designed as a ceiling mounting unit, but also suitable for mounting in sub-distributions with the optional DIN rail adapter.
It is equipped with two independently programmable DMX outputs with 512 channels each.
Lighting scenes and individual DMX channels (switching and dimming incl. status feedback) can be controlled directly via KNX group addresses.
A selected light scene can be controlled via an additional potential-free contact input.
The lighting scenes are programmed using a professional DMX software ("DMX Configurator", included).
The connection to an IP network is via (RJ45) network cable.

Functional overview:
* Control DMX devices via KNX/TP and KNXnet/IP
* Switching and dimming (relative and absolute incl. status feedback) of DMX channels
* Memory function (switch to last dimming value when DMX channels are switched on)
* Define groups and control them centrally
* Save sequences directly in the DUO DMX GATEWAY and control via KNX
* Direct control over the local network via APP (for iOS® and Android®)
* Two independent DMX interfaces
* Professional DMX software
* Trigger predefined light scenes via a contact
* Built-in KNX bus coupler
* No ETS application required
* Confirmation of states via KNX/TP
* Connect to the network using a network cable


Technical Data:
Operating voltage: 12–32 V DC
Power input: <= 1.2 VA
Connection: screw terminal
Environmental conditions: EN 50090-2-2, Class 3K5
Ambient temperature: –5 to +45°C
Storage temperature: –10 to +60°C
Relative humidity (non-condensing): < 95 % r. F.

Mechanical Data:
Installation: ceiling installation or via top hat rail adapter EN 50022 – 35 x 7.5
Dimensions (W x H x D) in mm:
without fastening lugs: 116 x 50 x 26
with fastening lugs: 146 x 50 x 26
Housing: plastic
Protection class: IP20 (according to EN 60529)

Interfaces:
Connection: Power over Ethernet (PoE) or Power supply over connection terminal;
KNX®: Twisted Pair KNX/TP bus connection;
LAN: RJ45 connection;
DMX: 2x DMX512 (screw terminal: <1.5 mm2);
Contact input to trigger light scenes;


Manufacturer: BAB TECHNOLOGIE GmbH
Description: DUODMX GATEWAY KNX
Article No.: 12021,
GTIN/EAN: 4260187361660,
Customs tariff number: 85176200,
Net weight: 0,130kg.


Price / Unit: EUR .............. (Excluding VAT)
Distribution: BAB TECHNOLOGIE GmbH, Dortmund, Germany

11312
12021 DUODMX GATEWAY KNX GATEWAYS
12599 10304 Eibport LAN KNX/TP + GSM Gateway VISUALIZATION
EIBPORT V3 KNX GSM
Art.-Nr .: 10304

EIBPORT V3 KNX GSM connects KNX / TP to Ethernet and contains automation and visualization functions. In addition, the IoT application integrates with standardized interfaces. As standard, each EIBPORT has four S0 interfaces and a USB interface for the use of 1-wire sensors via a USB bus master. The additionally integrated GSM module allows the sending and receiving SMS to reach the building automation even where no internet connection is available. The EIBPORT also contains the following functionalities:

* Web visualization for all devices
* Free visualization CONTROL L
* Innovative CUBEVISION visualization
* Visualization app for iOS® & Android®
* License-free & platform-independent
* Simple visualization editor (based on image processing programs)
* Web-based, graphical logic editor (available in 2017)
* HTTPS access is possible
* Encrypted user authentication
* Integration of IP network cameras
* Time synchronization with NTP server
* RSS feed indicator
* Integrated VPN server
* BAB SECURELINK integrated
* Address transfer from the ETS
* Busmonitor and data recording (500,000 telegrams)
* Address state table for initialization
* No data point limitation

Integrated services:
* Weekly clock, yearly clock, special clock, astro clock
* Staircase function, retarder
* Logics, light scenes
* Comparator, threshold switch, hysteresis, multiplexer
* Time & Date Transmitter
* E-mail (thus also SMS via e-mail)
* Send and receive SMS directly (with optional GSM module)
* Fault message processing
* Infrared & RS-232 connection via UDP
* UDP receiver & transmitter
* Cyclic transmitter
* Integration of ekey®-home & multi
* Monitor for ABB-DALI®-Gateway
* SONOS® control
* AUDIO MODULE control
* SQL Datalogging
* ETS remote programming
* KNX-IP router functionality
* Room temperature control (RTR)
* HTTP request with regular expression response
* Mathematics module, integrator
* Counters, pulse counters
* Wake on LAN
* Plant coupling
* 1-wire USB connection
* Pulse counter for S0 interface

Optional additional software:
* BAB STARTER
* CUBEVISION APP (Android® & iOS®)
* CONTROL R Occupancy plan control
* CONTROL W Desktop Widget
* DATAWAREHOUSE 2 for data and consumption analysis

EIBPORT can provide up to 50 visualization clients with KNX data. The visualization program can manage up to 200 different users and the number of visualization projects is only limited by the memory space. The device permanently keeps the state of all 32766 KNX addresses as well as 32768 virtual addresses from which all object states can be derived via the time stamp (address status table, no bus initialization necessary). For consumption display, EIBPORT stores 500,000 historical telegram data. The device is fanless and does not contain any rotating parts. The energy consumption is <5 W.

Technical specifications:
* Power supply: 12-30 V DC
* Power consumption: <= 5 VA
* Bus voltage: via the KNX®
* Operating system: Embedded Linux
* X86 600 MHz CPU, 256 MB RAM, 4 GB Flash
* Climate-resistant: EN 50090-2-2
* Ambient temperature: 0 to 40 ° C
* Relative humidity (non-condensing): 5% to 80%

Particularities:
* CUBEVISION integrated
* S0 / 1-Wire as standard
* New web-based logic editor (available in 2017)

Mechanical data:
* Mounting: REG housing 8 TE
* Dimensions (W x H x D) in mm: 144 x 90 x 64,5
* Housing: plastic
* Weight: approx. 0.4 kg
* Protection class: IP20 (according to EN 60529)

Interfaces (depending on variant):
* KNX® via Bus Terminal (Twisted Pair)
* Ethernet via RJ45 socket
* 1-Wire via USB
* 4 S0 interfaces
* EnOcean® via external SMA antenna
* GSM® via external SMA® antenna

GSM interface:
* 4-band modem
* Direct Send and receive SMS
* External antenna: 2.50 m cable, magnetic foot and SMA plug

Mounting: DIN rail mounting unit for DIN rail type EN 500022-35 x 7.5

Description: EIBPORT V3 KNX GSM

Art.-No .: 10304
GTIN / EAN: 4260187360618
Weight: 400g

Price / piece: EUR .............. (without VAT)

Manufacturer: BAB TECHNOLOGIE GmbH, Dortmund
12599
10304 EIBPORT LAN KNX/TP + GSM GATEWAY VISUALIZATION
17021 10504 EIBPORT LAN KNX + EnOcean Version 3 VISUALIZATION

Automation and visualization gateway for your building control

EIBPORT device connects your building control with Ethernet and Home-Entertainment. Thereby I have used as desired different techniques. Besides KNX / Powernet KNX TP and the EnOcean radio system or an optional GSM radio connection is available. Through the network interface, it is e.g. Possible to switch to beamer or start the preferred mp3 playlist by using a pushbutton. Furthermore, the eibPort provides an excellent visualization and automation of the whole building control.

The setup of the device is as simple as it is intuitive. The access to the building control can be realized locally or via remote access by PC, Laptop, Tablet or Smart Phone. The only thing required is a standard Internet browser.

Integrated services allow to implement self-acting functionalities as timer function, scenes, logical functions etc without starting an additional visualization (even in case of overlapping address ranges). For monitoring purposes network cameras can be integrated into the visualization. Messages (e.g. faults, housebreaking alarms) are sent to the email and / or SMS to your mobile phone. With the help of the service for distributed installation coupling properties are centrally merged (even when overlapping addresses). Remote programming of EIB / KNX- devices via ETS is possible too. The device is mounted in a common power distribution cabinet.

The power consumption is less than 5W.

Additional EIBPORT Version 3 is equipped with 1-Wire and four S0-Terminals. The S0 interfaces enable the direct integration of corresponding counter. Internal interfaces are supported by a service that converts the pulses to a counter. The 1-Wire connection takes place over the USB port. 1-Wire is characterized by low sensors of the presence and temperature. Especially in combination with the integrated RTR service of EIBPORT the solution leads to interesting scenarios

17021
10504 EIBPORT LAN KNX + ENOCEAN VERSION 3 VISUALIZATION
17022 10561 CUBEVISION MODULE VISUALIZATION
Entering the world of building automation has never been easier: The CUBEVISIONMODULE offers a premium visualisation, while being simplicity itself to set up and operate. The CUBEVISION visualisation allows for a consistent user interface and scales to fit on almost any input device. This means that smart phones and tablets etc. become handy and mobile control centres for the home. The configuration is intuitive and requires only three steps (Quick Setup). There are no restrictions regarding the number of data points, control elements or users. The embedded multiroom functionality permits the control of Sonos® players and our AUDIOMODULE, with virtually effortless setup. The CUBEVISIONMODULE is available with KNX/TP interface or EnOcean® antenna. Through its integrated KNXnet/IP server, the device also serves as a KNXnet/IP router, interface for the KNX configuration software ETS, or gateway between EnOcean® and KNXnet/IP.

 

17022
10561 CUBEVISION MODULE VISUALIZATION
17605 10310 FACILITY MASTER VISUALIZATION
The FACILITYMASTER is the EIBPORT’s big brother. It incorporates all the functionalities of the EIBPORT, but is designed for use in large-scale projects. In addition, individual applications such as DATALOGGER, APPMODULE and KNXEASY are incorporated. Thanks to its option of accommodating connections to the EIBPORT or LINKMODULE, however, it is also ideally suited to property management. 256 simultaneous connections to all visualisations (except Java Control) are possible. CONTROL W even allows up to 2000 connections. The room allocation plan (CONTROLl R) enables as many as 256 rooms to be automated. More than 2000 jobs can be entered in one device. The DATALOGGER enables internal data recording of 50 million datasets. Some applications can be added without any difficulties using the integrated APPMODULE. They work in a separate virtual machine within the FACILITYMASTER so that they do not influence other processes. The integration of third-party software using the integrated KNXEASY is also possible. The pre-installed Logitech™ Media Server makes the FACILITYMASTER the control centre of all the music zones. Thanks to the new failure management, the FACILITYMASTER becomes a central alarm information system with logged user accesses. BAB SECURE LINK (specially-encoded facility coupling protocol) enables secure transfer to other BAB devices.

 

17605
10310 FACILITY MASTER VISUALIZATION
17924 11104 EibPort Type LAN / Powernet KNX version 3 VISUALIZATION
EibPort Type LAN / Powernet KNX version 3

The eibPort is a gateway that connects the LAN / WAN to the Powernet KNX.
The device contains the following functionalities:

* Integrated multi-user browser remote visualization (incl. Editor), license-free
* 36 preformulated elements in a library; Freely positionable icons and texts.
* Save your own pictures (jpg, png, gif, animated gif)
* Transparent switches as well as creation of freely editable (own) switches possible
* Creation of own switch libraries (so-called themes).
* Side elements for "Sliding and zooming"
* Dialogue pages for fault messages (always in the foreground)
* User administration
* Remote commissioning of EIB systems via KNXnet / IP (via LAN / Internet)
* Remote control via LAN / WLAN / Internet
* Integration of IP network cameras
* Time switch programs (year clock, week clock, special day clock, retarder)
* Scenes and logic functions (link, comparator, threshold, hysteresis)
* Fault messages, measured values ??and states can be transmitted via e-mail (SMS)
* Connection of individual properties (via LAN / Internet)
* E-mail shipping; E-mail to SMS
* Control of multimedia applications
* Integration of the xPL protocol (Logitech Squeezebox Server)
* Integrate UPnP to drive Sonos Network Misuk players
* Connection to Microsoft Media Center Edition (MCE)
* Send and receive infrared signals (IRTrans, Squeezebox)
* Database connection (MySQL); Logging to MySQL databases
* NTP time transmitter
* Astro watch
* Sending ASCII texts or binary values ??(UDP transmitters)
* KNX / IP protocol connection ('routing' and 'tunneling', no programming)
* EIB data server (CGI interface)
* OPC server (with NETxEIB Open OPC)
* Sending texts (EIS 15)
* RSS feeds
* Http request possible
* Evaluation of Http-Request
* Math module with functions, predefined constants, and creating your own variables
* Integral function over time (to calculate consumption)
* Counters with various functions
* Occupancy plan module; Planning of space functions (additional license costs)
* Operation via PDA, iPhone / iPod, Android phone, BlackBerrx u, v.a via the Control S possible.
* Ajax interface for visualization on mobile devices such as iPad, webpads, etc.
* Data transfer from the ETS possible (ESF file).
* ESF data collection
* Integrated bus monitor
* No data point limitation
* 128 bit encryption for transferring the configuration data
* No software required for commissioning

In connection with the software DataWarehouse 2:

- Evaluate data recordings according to time ranges and greeting addresses
- Data transfer to MS®-Excel

As an EIB server, the eibPort simultaneously supplies up to 50 visualization clients with EIB data.
The visualization program can manage up to 200 different users.
Up to 20 projects can be created.
The device permanently keeps the state of all 32766 EIB addresses as well as 32768 virtual addresses from which all object states can be derived via the time stamp (address status table, no bus initialization required).
500,000 historical group addresses (via filter) can be saved.
The device is fanless and does not contain any rotating parts. The energy consumption lies
<5 W (typically 24 V, 70 mA).
It is intended for installation in the standard installation manifold.
On the front side, an angled RJ 45 socket is provided for connecting the LAN.


Technical specifications:

Processor: x86 processor @ 600 MHz
256 MB RAM; 4 GB flash memory
Ethernet up to 100 Mbps

Mounting: DIN rail mounting unit for DIN rail type EN 500022-35 x 7.5

Width: 8 HP (1 HP = 18 mm)

connections
Powernet KNX: via screw terminals at the mains coupler
KNX: via Bus Terminal Twisted Pair
Ethernet: 10 Base T Ethernet (RJ 45 socket)
Power supply: 15-30 V DC
Power consumption: <5 VA

Description: eibPort Type LAN / Powernet KNX

Art.-No .: 11104


Distribution: b.a.b-technologie gmbh, Dortmund
17924
11104 EIBPORT TYPE LAN / POWERNET KNX VERSION 3 VISUALIZATION
17925 11504 GATEWAY EibPort LAN / PowerNet KNX version 3 VISUALIZATION
EibPort LAN / PowerNet KNX version 3
 The eibPort type is a portal that connects to the LAN / WAN network with
 PowerNet KNX.
 The device includes the following features:
 * Integrated remote viewing space browser (IVA incl.) Editor), free license
 * 36 previously defined elements in a library; Freely positionable icons and texts.
 * Store your own image (jpg, png, gif, animated gif)
 * possible
 Switch transparent switches as well as creation of free (own) edition baren * creation of own switch libraries (sog Themes).
 * Page elements for "scrolling and zooming"
 * Error page dialog (always on top)
 * User management
 * Remote operation of EIB installations via KNXnet / IP (via LAN / Internet)
 * Remote control via LAN / WLAN / Internet
 * Integration of IP cameras for network
 * Program change time (clock year, clock of the week, special labels, retarders)
 * Scenes and logical functions (link, comparator, hysteresis threshold)
 * Downloadable alarms, measurements and conditions via email
 * Individual real estate coupling (through LAN / Internet)
 * Email sending; Email to SMS
 * Multimedia application control
 * Integration of xPL protocol (Logitech Squeezebox server)
 * UPnP integration for the control of Misuk players from Red Sonos
 * Connection for Microsoft Media Center Edition (MCE)
 * Send infrared and receive signals (IRTrans, Squeezebox)
 * Connectivity database (MySQL); Registration in MySQL databases
 * NTP time channel
 * Astro clock
 * Send text values ??or binary ASCII (UDP-sender)
 * KNX / IP protocol connection ('Path' and 'Tunnel', no program)
 * Bei data server (CGI interface) * OPC Server (open from NETxEIB OPC)
 * Send text messages (ice 15)
 * RSS feeds represent * HTTP request possible
 * Evaluation of the HTTP request
 * Math module functions, predefined constants and create your own variables
 * Integral function in time (for consumption calculation)
 * Counter with various functions
 * Availability calendar module; Promote planning of space functions (additional cost license)
 * Operation via PDA, iPhone / iPod, Android phone, BlackBerrx u, others by the possible control S.
 * AJAX interface for display on mobile devices such as iPad, Web tablets, etcetera.
 * Transfer of data of possible STDs (European Social Fund file).
 * Combining ESF data
 * Integrated bus monitor
 * No limit point
 * 128-bit encryption to transfer configuration data
 * No software to start is needed
 Together with the data warehouse software 2:
 - evaluate log data for time intervals and Grußßenadressen
 - transfer data to MS Excel®
 The eibPort provided as a BEI server up to 50 clients with EIB data visualization.
 The display program can manage up to 200 different users.
, You can create up to 20 projects.
 Device addresses such as 32768 virtual addresses maintains permanent status of EIB 32766, which time stamp all object states can derive (Adresszustandstabelle, no necessary bus initialization).
 500 000 historical group addresses (with filter) can be stored.
 The device, no rotating parts is fanless and includes. Power consumption is
 & Lt; 5 W (typical 24 V, 70 mA). It is intended for installation in the default installation distribution.
 An RJ 45 socket for the LAN connection is connected to the front.
 Specifications:
 Processor: x86 processor
600 MHz
 256 MB RAM; 4 GB Flash Memory
 Ethernet up to 100 MBit / s
 Assembly: device in DIN rail type EN 500022-35 x 7.5
 Width: TE 8 (1 HP = 18 mm)
 Connections
 PowerNet KNX: through terminals on the power coupler
 KNX: via the bus terminal of
 Twisted pair Ethernet: 10 T-base Ethernet (RJ-45 connector) to power supply: 15-30 V DC
 Consumption: & lt; 5VA
 Tag: eibPort type LAN / PowerNet KNX
 art. Nº: 11104
17925
11504 GATEWAY EIBPORT LAN / POWERNET KNX VERSION 3 VISUALIZATION
17926 13304 EIBPORT V3 EnOcean GSM gateway automation and visualization VISUALIZATION
EIBPORT V3 EnOcean GSM
Art.-No .: 13304

EIBPORT V3 EnOcean GSM connects EnOcean to Ethernet and contains automation and visualization functions. In addition, the IoT application integrates with standardized interfaces. As standard, each EIBPORT has four S0 interfaces and a USB interface for the use of 1-wire sensors via a USB bus master. The device is also KNXnet / IP EnOcean Gateway via the integrated KNX-IP router functionality. The additionally integrated GSM module allows the sending and receiving SMS to reach the building automation even where no internet connection is available. The EIBPORT also contains the following functionalities:

* Web visualization for all devices
* Free visualization CONTROL L
* Innovative CUBEVISION visualization
* Visualization app for iOS® & Android®
* License-free & platform-independent
* Simple visualization editor (based on image processing programs)
* Web-based, graphical logic editor (available in 2017)
* HTTPS access is possible
* Encrypted user authentication
* Integration of IP network cameras
* Time synchronization with NTP server
* RSS feed indicator
* Integrated VPN server
* BAB SECURELINK integrated
* Address transfer from the ETS
* Busmonitor and data recording (500,000 telegrams)
* Address state table for initialization
* No data point limitation

Integrated services:
* Weekly clock, yearly clock, special clock, astro clock
* Staircase function, retarder
* Logics, light scenes
* Comparator, threshold switch, hysteresis, multiplexer
* Time & Date Transmitter
* E-mail (thus also SMS via e-mail)
* Send and receive SMS directly (with optional GSM module)
* Fault message processing
* Infrared & RS-232 connection via UDP
* UDP receiver & transmitter
* Cyclic transmitter
* Integration of ekey®-home & multi
* Monitor for ABB-DALI®-Gateway
* SONOS® control
* AUDIO MODULE control
* SQL Datalogging
* ETS remote programming
* KNX-IP router functionality
* Room temperature control (RTR)
* HTTP request with regular expression response
* Mathematics module, integrator
* Counters, pulse counters
* Wake on LAN
* Plant coupling
* 1-wire USB connection
* Pulse counter for S0 interface

Optional additional software:
* BAB STARTER
* CUBEVISION APP (Android® & iOS®)
* CONTROL R Occupancy plan control
* CONTROL W Desktop Widget
* DATAWAREHOUSE 2 for data and consumption analysis

EIBPORT can provide up to 50 visualization clients with KNX data. The visualization program can manage up to 200 different users and the number of visualization projects is only limited by the memory space. For better internal processing, EnOcean telegrams are implemented on KNX group addresses. The device permanently keeps the state of all 32766 KNX addresses as well as 32768 virtual addresses from which all object states can be derived via the time stamp (address status table, no bus initialization necessary). For consumption display, EIBPORT stores 500,000 historical telegram data. The device is fanless and does not contain any rotating parts. The energy consumption is <5 W.

Technical specifications:
* Power supply: 12-30 V DC
* Power consumption: <= 5 VA
* Bus voltage: via the KNX®
* Operating system: Embedded Linux
* X86 600 MHz CPU, 256 MB RAM, 4 GB Flash
* Climate-resistant: EN 50090-2-2
* Ambient temperature: 0 to 40 ° C
* Relative humidity (non-condensing): 5% to 80%

Particularities:
* CUBEVISION integrated
* S0 / 1-Wire as standard
* New web-based logic editor (available in 2017)

Mechanical data:
* Mounting: REG housing 8 TE
* Dimensions (W x H x D) in mm: 144 x 90 x 64,5
* Housing: plastic
* Weight: approx. 0.4 kg
* Protection class: IP20 (according to EN 60529)

Interfaces (depending on variant):
* KNX® via Bus Terminal (Twisted Pair)
* Ethernet via RJ45 socket
* 1-Wire via USB
* 4 S0 interfaces
* EnOcean® via external SMA antenna
* GSM® via external SMA® antenna

EnOcean interface:
* Range 300 m Freifeld / 30 m Building (depending on building material)
* Input objects: any number
* Output objects: 128
* Many pre-set EnOcean® profiles (see "EnOcean Compatibility List")
* Can be used as a repeater
* Latest STM 300 transceiver module
* External antenna: 2.50 m cable, magnetic foot and SMA plug

GSM interface:
* 4-band modem
* Direct Send and receive SMS
* External antenna: 2.50 m cable, magnetic foot and SMA plug

Mounting: DIN rail mounting unit for DIN rail type EN 500022-35 x 7.5

Description: EIBPORT V3 EnOcean GSM

Art.-No .: 13304
GTIN / EAN: 4260187360625
Weight: 400g

Price / piece: EUR .............. (without VAT)

Manufacturer: BAB TECHNOLOGIE GmbH, Dortmund
17926
13304 EIBPORT V3 ENOCEAN GSM GATEWAY AUTOMATION AND VISUALIZATION VISUALIZATION
17930 10411 DATALOGGER V2 SYSTEM DEVICES

DATALOGGER V2 - 10411

The DATALOGGER V2 is a high-performance top hat rail device for recording KNX® telegram data based on MySQL in real-time.
It receives the data either via KNX/TP or KNXnet/IP routing.
All configuration is carried out via a user-friendly web interface. External software is not required for operation.
The integrated KNXnet/IP server uses the routing as well as the tunneling protocol.
All data is recorded in an internal or – for larger data quantities – an external MSQL database.
The ETS4 and ETS5 project information is used to structure the database automatically.
Export to a USB stick takes place manually or by e-mail using a previously-set cycle.
Thanks to CSV or XLS format, the data can be used directly.


Functional overview:
* Recording the KNX telegrams in internal MySQL database
* Write the KNX telegrams to external MySQL database
* Filter function for receiving KNX telegrams
* Export function with filter function
* Monitoring of KNX group addresses
* Integrated KNXnet/IP router
* Implemented protocol KNXnet / IP routing and tunneling
* Supports ETS4 and ETS5 project import
* Automatic export to USB stick or via email
* Evaluation of the telegram load
* Localization of the 10 mostly received group addresses
* Localization of the 10 mostly received physical addresses
* Intuitive web interface
* Platform independent

Technical Data:
Operating voltage: 12-32 V DC
Power consumption:  <= 5 W
Connection: Power supply over screw clamp
Climate resilient: EN 50090-2-2
Ambient temperature: -5 bis +35 °C
Storage temperature: -10 bis +60 °C
Relative humidity (non condensing): 5% - 80%

Mechanical Data:
Mounting: DIN-Rail Housings 4 TE
Dimensions (B x H x T) in mm: 70 x 90 x 63
Housing: plastic
Protection class: IP20 (according to EN 60529) 

Interfaces:
KNX®: Twisted Pair KNX/TP bus connection;
RJ45 connection;
USB 2.0: 2x.


Manufacturer: BAB TECHNOLOGIE GmbH
Description: DATALOGGER V2,
Article No.: 10411,
GTIN/EAN: 4260187361592,
Customs tariff number:  #85176200,
Net weight: 0,200kg.

Price / Unit: EUR .............. (Excluding VAT)
Distribution: BAB TECHNOLOGIE GmbH, Dortmund, Germany

17930
10411 DATALOGGER V2 SYSTEM DEVICES
17931 10401 KNXEASY converter KNX® telegrams to ASCII SYSTEM DEVICES
The KNXEASY converts KNX® telegrams to ASCII code and vice-versa. The connection of third-party applications is very easy with its help. The device transmits the data both via TCP and UDP. Thanks to the simple structure of the KNXEASY protocol, (ASCII commands), its integration is as simple as conceivably possible.

A KNX/TP connection as well as a KNXnet/IP server of high value ensure the connection to KNX®. The number of data points is unlimited. The values of all group addresses are stored in an address status table. Different KNX environments with the same group addresses can be distinguished using a system ID. Thanks to the use of the identifier and data types, the upload of the ETS4 project data simplifies the creation of the ASCII commands. Additionally, the KNXEASY can also be used as a programming interface for the ETS. It is configured using a web interface and is platform-any
17931
10401 KNXEASY CONVERTER KNX® TELEGRAMS TO ASCII SYSTEM DEVICES
17932 10301 EIBNODE V2 KNX gateway GATEWAYS

EIBNODE is the intelligent link between the KNX and Ethernet. The gateway couples several KNX lines via Ethernet and provides separate, self-sufficient control functions. Thanks to the Ethernet fast backbone with 100 mbit/s, there is no data jam any more. EIBNODE can be integrated into existing facilities without great work. Because of an amount of special features EIBNODE can be set up as a system coupler anywhere in the classic KNX topology. Even above area couplers and between area and line couplers.

Art.-No.: 10301

17932
10301 EIBNODE V2 KNX GATEWAY GATEWAYS
17933 12041 DUODMX GATEWAY GATEWAYS
The DUODMX GATEWAY serves as a DMX gateway for KNX® or EnOcean® systems but is also available as a standalone version. It has two independently-configurable DMX outputs, with 512 channels each, allowing you to control two DMX word independently. The device can be operated as a DMX master or slave. The gateway transmits DMX packages in master mode and receives them in slave mode. The different device variants position the DUODMX GATEWAY ideally for usage in almost any required scenario. The WLAN option, available for many versions, rounds up the product line. Native apps for iOS® and Android® make operation of the gateway particularly easy. «DMX-Configurator» – a professional DMX configuration software – not only enables you to dim individual channels, but also to program complex sequences. The DUODMX GATEWAY is highly suitable for subsequent installation as a device installed in the ceiling. A corresponding adapter is available for top hat rail installation.
17933
12041 DUODMX GATEWAY GATEWAYS
17949 10495 APPMODULE KNX GATEWAYS
The APPMODULE provides you with new opportunities. Similar to a smartphone, the module provides the opportunity to load apps which are available from the BAB APPMARKET. Whether the connection to a non-KNX® system or specific automation solutions are required – simply install several apps and customise the device for your projects. Benefit from the constantly growing range of apps available from the BAB APPMARKET. Building automation has never been this flexible. Link your apps with CUBEVISION – one of the most innovative visualisations – and control multimedia, network services, home appliances, or proprietary systems from a single interface.
17949
10495 APPMODULE KNX GATEWAYS
17953 10551 LINKMODULE KNX/TP GATEWAYS
In addition to the KNXnet/IP router functionality, the LINKMODULE incorporates the proven BAB facility coupling protocol. This uses Unica st transfer and communicates via the router and the Internet without problems. Specific measures as required for normal IP routers which use Multicast are not necessary. Furthermore, the LINKMODULE communicates via BAB SECURELINK (one click connection) which enables secure transfer to other BAB devices. The module is both capable of accepting an encoded connection and of establishing an encoded connection, for example to the FACILITYMASTER. The LINKMODULE can also be used as a programming interface for the ETS due to its integrated KNXnet/IP server.

 

17953
10551 LINKMODULE KNX/TP GATEWAYS
17959 04625 APTOUCH PANEL 150 Stainless Steel (AP-Touch Panel PC 15") VISUALIZATION
Thanks to their VESA mount, the panels are quick to install and ready for immediate use. The rugged stainless steel housing has the protection class IP 65. Nevertheless, it is only 6 cm deep. The device is fanless and equipped with a TFT LCD screen. It is used in department stores, hardware stores and industrial halls.
As an operating system, the uncomplicated Windows® 7 Professional is preinstalled on a 320 GB HDD drive.
17959
04625 APTOUCH PANEL 150 STAINLESS STEEL (AP-TOUCH PANEL PC 15") VISUALIZATION
13436 20420 DataWarehouse 2.0 SYSTEM DEVICES
eibPort DataWarehouse Client Software
• is based on the eibPort’s functionality to write group addresses and values into a mySQL database
• Analysis of long term data recordings of one or more mySQL databases
• no limitation regarding number of handled databases
• database statistics
• selection according to time stamp and/ or group address
• Export as csv-file
13436
20420 DATAWAREHOUSE 2.0 SYSTEM DEVICES
13529 12090 DIN rail adapter SYSTEM DEVICES
Hutschienenadapter für DUO-DMX Gateway Extension, DUO-DMX Gateway KNXnet/IP, DUO-DMX Gateway KNX/TP und DUO-DMX Gateway EnOcean.
13529
12090 DIN RAIL ADAPTER SYSTEM DEVICES
17945 35421 Power supply 12 V 1.5A SYSTEM DEVICES

Safety Standard EN60950 – UL508
EMC Standard  EN55022/B - EN61000-4
CE European Directives CE 2006/95/ECC - 89/336
Degree of protection IP 20
MTBF (MIL HDBK217) ~ 100'000 h
Service condition -10°C / +50°C
Relative humidity (non-condensing) 5% ÷ 90%
Overload / Short circuit / Over voltage protection Electronic
Operating LED
Coloure grey RAL 7035 

Nominal input voltage: 100 – 240 Vac

Nominal frequency:48 - 63 Hz

No load input power: 0,4 – 0,5 W

Nominal output voltage: 12 Vdc

Output voltage: precision ±3 %

Adjustable output: voltage 12-14Vdc

Nominal output: current 1,5A

Nominal power: 18 W

Limitation current:1,9 A

Short circuit current: 2,5 A

Efficiency 80 - 85 %

Housing DIN rail REG 2TE

17945
35421 POWER SUPPLY 12 V 1.5A SYSTEM DEVICES
17947 35423 Power supply 24 V 3A SYSTEM DEVICES

Safety Standard EN60950 – UL508
EMC Standard  EN55022/B - EN61000-4
CE European Directives CE 2006/95/ECC - 89/336
Degree of protection IP 20
MTBF (MIL HDBK217) ~ 100'000 h
Service condition -10°C / +50°C
Relative humidity (non-condensing) 5% ÷ 90%
Overload / Short circuit / Over voltage protection Electronic
Operating LED
Coloure grey RAL 7035

Nominal input voltage:230 Vac +/- 10%

Nominal frequency: 48 - 63 Hz

No load input power: 0,9 W

Nominal output voltage: 24 Vdc

Output voltage: precision ±3 %

Adjustable output: voltage 24-28 Vdc

Nominal output: current 3 A

Nominal power 72 W

Limitation current: 4,4 A

Short circuit current: 4,7 A

Efficiency 90 %

Housing DIN rail REG 4TE

17947
35423 POWER SUPPLY 24 V 3A SYSTEM DEVICES
17948 35424 Power Supply 24V 4A SYSTEM DEVICES

Safety Standard EN60950 – UL508
EMC Standard  EN55022/B - EN61000-4
CE European Directives CE 2006/95/ECC - 89/336
Degree of protection IP 20
MTBF (MIL HDBK217) ~ 100'000 h
Service condition -10°C / +50°C
Relative humidity (non-condensing) 5% ÷ 90%
Overload / Short circuit / Over voltage protection Electronic
Operating LED
Coloure grey RAL 7035

PSM4/96.24

Nominal input voltage: 230 Vac +/- 10%

Nominal frequency: 48 - 63 Hz

No load input power: 0,9 W

Nominal output voltag: 24 Vdc

Output voltage: precision ±3 %

Adjustable output: voltage 24-28 Vdc

Nominal output: current 4 A

Nominal power 96 W

Limitation curren: 4,4 A

Short circuit current: 4,7 A

Efficiency 90 %

Housing DIN rail REG 4TE

17948
35424 POWER SUPPLY 24V 4A SYSTEM DEVICES
17951 35422 Power Supply 24V 5A SYSTEM DEVICES

Safety Standard EN60950 – UL508
EMC Standard  EN55022/B - EN61000-4
CE European Directives CE 2006/95/ECC - 89/336
Degree of protection IP 20
MTBF (MIL HDBK217) ~ 100'000 h
Service condition -10°C / +50°C
Relative humidity (non-condensing) 5% ÷ 90%
Overload / Short circuit / Over voltage protection Electronic
Operating LED
Coloure grey RAL 7035

Nominal input voltage: 230 Vac +/- 10%

Nominal frequency:48 - 63 Hz

No load input power: 0,95 W

Nominal output voltage: 24 Vdc

Output voltage: precision ±3 %

Adjustable output: voltage 24-28 Vdc

Nominal output: current 5 A

Nominal power 120 W

Limitation current: 6,3 A

Short circuit current: 7,5 A

Efficiency 90 %

Housing DIN rail REG 6TE

17951
35422 POWER SUPPLY 24V 5A SYSTEM DEVICES
17952 35411 Emergency Power Accumulator SYSTEM DEVICES
Accumulator for emergency power supply of the eibPort in case of power failure/voltage interruption for min 6.5h at load of 5W.
The battery ADP9/18.12 is optimized to the power supply PSM2/18.12 and designed for DIN rail mounting (REG 9TE housing).
Through the connectors, the accumulator can be connected directly to the power supply PSM2/18.12. In accumulator is integrated a fuse to protect the battery.
17952
35411 EMERGENCY POWER ACCUMULATOR SYSTEM DEVICES
17956 20562 Control R Software VISUALIZATION
Control R is a module within the eibPort displaying the actual status of particular rooms graphically and to control these rooms. Possible use for this module are buildings with an uniform structure f.i.schools, seminar rooms or hotels.
The control R module is part of the eibPort visualization editor. All settings will be made using a configuration mask
of its own. After successful configuration the eibPort calculates all required times for switching in advance.
To enable the eibPort to do this calculation is necessary to install the license for the Control R Modul.
The license is directly linked with the serial number of the eibPort.
17956
20562 CONTROL R SOFTWARE VISUALIZATION
17957 20300 Control W Software VISUALIZATION

Control W is a Server-Client application for eibPort. The software allows local operation of KNX components by
PC; up to 100 Workplace visualizations per eibPort can be handled (100 PC buttons).
Control W provides a comfortable control for lighting, tailing and room temperature to the user and so serves for efficient work under individual conditions. For the building operator there is a huge potential for saving
costs because „real“ devices as switches can be replaced by Control W. In contrast to other software solutions there is no projectdata (except the client application)stored on the office PC. All data is stored centrally on the
eibPort device.

Multi function pushbutton

Due to the graphic user interface it’s not neccessary to edit the configuration files awkware manually using a text editor tool. The import of ETS® Data additionally simplifies the address assignment. Changes in facilikty management can be done quite easily by adaption of the software instead of mounting of new operation devices and cables. So installation costs will be reduced.

AddWare for eibPort

• building of PC multi function pushbuttons
• integrated library with switches,dimmern, blinds switches and room temperature controllers
• Up to 100 PCs may connect to one eibPort
• Communication via LAN
• all relevant project data is stored directly on eibPort device
• Call via Tray Icon Software Licenses

17957
20300 CONTROL W SOFTWARE VISUALIZATION
17958 20541 Control T Software VISUALIZATION
Software Control T provides an allover information center for your building. Both visualization of building automation and control of Multiroom Audio/ Video-installations can be called and operated. Moreover links to webpages, E-Mail or camera streams can be integrated and will be opened via an easy to handle menue.
The integrated UPnP Control Point allows the dynamic call of DVD and/or MP3 collections incl. cover arts.
Whether using a build in Touch-Display at the wall or a WebPad (Win7) – a fast access to the wanted information is possible any time. The system provides direct access to all different menues without loading the content again.
Using Control T you may used all functionalities of a „normal“ Internet Browsers. Via an On-Screen keyboard any desired further Internet pages can be called. Control T is set up with a simply to use
17958
20541 CONTROL T SOFTWARE VISUALIZATION
17962 04901s AP-Touch Panel PC 15,6" VISUALIZATION

These panels captivate with their high-class piano varnish look. The surface is made of solid glas framed with massive
aluminium. Having an installation depth of just just 6 cm they are extremly flat. The narrow-edged white (or black) backgrounded frame is hardly apparent when mounted on a wall. Nevertheless the surface complies to IP 65!
A wide screen LED LCD servers as display. The touch display is set up as resistive Multi Touch and so is prepared for gesture control. As processor an Intel Pineview Dual Core (D525 with 1,8 GHz) or Intel Celeron G540 2.5GHz for 21,5“ is used. Some field for application are receptions, Salesrooms, hospitals but also the e-home.

Technical data
extremly flat Panel-PC witt resistive touch surface
color wide screen LED LCD
Background illumination: 250 xd/m2
Windows 7 professional on 160GB HDD preinstalled
4 x COM port RJ 45 (RS-232 x 3, RS-232/485 x 1)
1 x Parallel port
1 x 2.5“ HDD bay
4 x USB port
2 x 2 Watt Speaker
Camera: installed 2MP front-camera
Power Supply 19 V DC (icluded in delivery)
Mounting: 75 x 75mm VESA Standard
Front: Polyethylene Terephthalate / IP65
Installation depth just 4,8 cm
Chassis available in white(w) or black(s) colour

Measures WxHxD (in mm): 396 x 245x 48

Resolution: 1366*768

1 x RJ-45 10/100/1000 Base-T Ethernet Port

2GB (2* DDR3, max 4GB)

1 x Mic-IN, 1x Line-OUT

Intel Pineview Duo Core D525 1.8G

17962
04901S AP-TOUCH PANEL PC 15,6" VISUALIZATION
17964 04902s AP-Touch Panel PC 18,5" VISUALIZATION

Technical data
extremly flat Panel-PC witt resistive touch surface
color wide screen LED LCD
Background illumination: 250 xd/m2
Windows 7 professional on 160GB HDD preinstalled
4 x COM port RJ 45 (RS-232 x 3, RS-232/485 x 1)
1 x Parallel port
1 x 2.5“ HDD bay
4 x USB port
2 x 2 Watt Speaker
Camera: installed 2MP front-camera
Power Supply 19 V DC (icluded in delivery)
Mounting: 75 x 75mm VESA Standard
Front: Polyethylene Terephthalate / IP65
Installation depth just 4,8 cm
Chassis available in white(w) or black(s) colour

Measures WxHxD (in mm): 464 x 284 x 48

Resolution: 1366*768

1 x RJ-45 10/100/1000 Base-T Ethernet Port

2GB (2* DDR3, max 4GB)

1 x Mic-IN, 1x Line-OUT

Intel Pineview Duo Core D525 1.8G

17964
04902S AP-TOUCH PANEL PC 18,5" VISUALIZATION
17966 04903s AP-Touch Panel PC 21,5" VISUALIZATION

Technical data
extremly flat Panel-PC witt resistive touch surface
color wide screen LED LCD
Background illumination: 250 xd/m2
Windows 7 professional on 160GB HDD preinstalled
4 x COM port RJ 45 (RS-232 x 3, RS-232/485 x 1)
1 x Parallel port
1 x 2.5“ HDD bay
4 x USB port
2 x 2 Watt Speaker
Camera: installed 2MP front-camera
Power Supply 19 V DC (icluded in delivery)
Mounting: 75 x 75mm VESA Standard
Front: Polyethylene Terephthalate / IP65
Installation depth just 4,8 cm
Chassis available in white(w) or black(s) colour

Measures WxHxD (in mm): 536 x 328 x 48

Resolution: 1920*1080

2 x RJ-45 10/100/1000 Base-T Ethernet Port

1 x Line-IN, 1x Line-OUT

2GB (1* DDR3, max 8GB)

Intel Celeron G540 2,5 GHz

17966
04903S AP-TOUCH PANEL PC 21,5" VISUALIZATION


KNX SPECIAL CATALOGUES
Different looks for KNX push buttons
Push buttons
Smart metering
Iddero Verso Interactive Presentation

LEARN
Free webinars
uBrick Tutorials
VideoTutorials CBSE


PARTICIPATE
µBrick Trivia
KNX Tips & tricks
TEST
Free test of CBSE visualization

LATEST KNX NEWS
All news

LATEST KNX OFFERS
All offers
DOWNLOADS
KNX - All brands

FUTURASMUS KNX GROUP
Contact
Location
Futurasmus in the world
FOLLOW US
YouTube Channel
Facebook
LinkedIN
Google+
Twitter

KNX++ TRAINING CENTER
Futurasmus Zentrum

CERTIFIED KNX TEST LAB
Futurasmus KNX Lab
SPECIALIZED KNX WHOLESALER CERTIFIED KNX TRAINING CENTRE
Futurasmus KNX Group is a highly specialized and internationally active KNX Wholesaler, being our forte the excellent technical support we provide. You can visit our online catalogue in this website and, if you are a professional, ask for a non binding offer for your KNX projects. Should you be interested in buying KNX components, you are welcome to read our General Sales Conditions and contact our technicians and commercial agents per telephone, e-mail or online help. Since 2003 we have been a Certified Training Centre KNX++, which means that we are entitled to impart the KNX Basic Course as well as the KNX Advanced Course and KNX Tutor Course. We are manufacturer-independent and also offer other specialized and monographic KNX seminars. After teaching more than 1.500 KNX partners, our KNX Trainers have quite a large and positive expertise. Please, contact us for customized KNX training worldwide (groups of at least 8 people) at training@futurasmus-knxgroup.org
USE OF COOKIES
We use our own and third-party cookies, analyzing your browsing habits in out website, with the finality of ensuring the quality, security and improvement of the offered services through the same. In the case that the user does not explicitly state whether to accept the installation of cookies, but continues using our website, it will mean that he has consented expressly, informing him about the possibility to block or remove the installed cookies on his computer by configuring the appropriate settings of the browser. You can get more information on this subject reading our "Cookies Policy".