Order by:   Filter results: 
Web Code Reference Description Category Price
4388 88322 AK1 (RED/BLACK) bus connectors KNX ACCESSORIES
Standard KNX connector to connect devices and also to branch the bus (up to 4 pairs), in red/black colour
4388
88322 AK1 (RED/BLACK) BUS CONNECTORS KNX ACCESSORIES
10807 88328 Bus connectors 8 pins (RED/BLACK) SYSTEM DEVICES

KNX connector to branch the bus (up to 8 pairs), in red/black colour.

10807
88328 BUS CONNECTORS 8 PINS (RED/BLACK) SYSTEM DEVICES
12387 87765 Direct connection, 4 tariff, Active Energy, (75 A), 3 x 230V / 400V AC SMART METERING

The Lingg & Janke KNX REG meters are multifunctional electric energy meters with outstanding flexibility and accuracy.

They combine the functions of a multimeter, energy meter and data logger. Using KNX FacilityWeb, the meters can read out and log numerous measured values, such as active and reactive energy, active and reactive power, voltage, current and power factor. Each one of the different power values can be monitored with two thresholds.

The Standard KNX meter can be used for direct measurement (75 A) and transformer measurement (1 and 5 A). The rating factor for the transformer meter can be defined in a wide range on the device. The Standard KNX meter is an accumulating unidirectional meter for active energy reading supporting up to 4 tariffs.

The Superior KNX meter is an accumulating bidirectional meter that is also capable of reading reactive energy. It can be used for direct (75 A) or transformer measurement (1 and 5 A) and also supports up to 4 tariffs. In addition, it provides 4 switching outputs (max. 230V, 90mA), that can be operated over the KNXbus

12387
87765 DIRECT CONNECTION, 4 TARIFF, ACTIVE ENERGY, (75 A), 3 X 230V / 400V AC SMART METERING
12388 87766 Direct connection, 4 tariff, Active Energy, (75 A), 3 x 230V / 400V AC, 4 switching outputs SMART METERING

The Lingg & Janke KNX REG meters are multifunctional electric energy meters with outstanding flexibility and accuracy.

They combine the functions of a multimeter, energy meter and data logger. Using KNX FacilityWeb, the meters can read out and log numerous measured values, such as active and reactive energy, active and reactive power, voltage, current and power factor. Each one of the different power values can be monitored with two thresholds.

The Standard KNX meter can be used for direct measurement (75 A) and transformer measurement (1 and 5 A). The rating factor for the transformer meter can be defined in a wide range on the device. The Standard KNX meter is an accumulating unidirectional meter for active energy reading supporting up to 4 tariffs.

The Superior KNX meter is an accumulating bidirectional meter that is also capable of reading reactive energy. It can be used for direct (75 A) or transformer measurement (1 and 5 A) and also supports up to 4 tariffs. In addition, it provides 4 switching outputs (max. 230V, 90mA), that can be operated over the KNXbus

12388
87766 DIRECT CONNECTION, 4 TARIFF, ACTIVE ENERGY, (75 A), 3 X 230V / 400V AC, 4 SWITCHING OUTPUTS SMART METERING
12395 87773 EMU Standard KNX DIN Rail Meters, Transformer 1/5 A SMART METERING

The new Lingg & Janke KNX DIN rail meters are multifunctional three phase energy meters of only 90 mm (5 Units) width offering exceptional flexibility and accuracy. Providing current transformer connection, these meters are capable of analyzing and monitoring a variety of parameters and can be employed in even the most demanding residential, commercial or industrial field of application. They combine the functions of a multimeter, energy meter and data logger in a single device. Using KNX FacilityWeb, the meters can read out and log numerous measured values, such as active and reactive energy, active and reactive power, voltage, current and power factor. Each one of the different output values can be monitored with two thresholds. The Standard KNX meter can be used for transformer measurement (1 and 5 A). The rating factor for the transformer meter can be defined in a wide range on the device.

The Standard KNX meter is an accumulating unidirectional meter for active energy reading supporting up to 4 tariffs.

The Superior KNX meter is an accumulating bidirectional meter that is also capable of reading reactive energy. It can be used for transformer measurement (1 and 5 A) and also supports up to 4 tariffs. In addition, it provides 4 switching outputs (230VAC, 90mA max.) that can be operated over the KNX bus.

12395
87773 EMU STANDARD KNX DIN RAIL METERS, TRANSFORMER 1/5 A SMART METERING
12396 87774 EMU Superior KNX DIN Rail Meters, Transformer 1/5 A SMART METERING

The new Lingg & Janke KNX DIN rail meters are multifunctional three phase energy meters of only 90 mm (5 Units) width offering exceptional flexibility and accuracy. Providing current transformer connection, these meters are capable of analyzing and monitoring a variety of parameters and can be employed in even the most demanding residential, commercial or industrial field of application. They combine the functions of a multimeter, energy meter and data logger in a single device. Using KNX FacilityWeb, the meters can read out and log numerous measured values, such as active and reactive energy, active and reactive power, voltage, current and power factor. Each one of the different output values can be monitored with two thresholds. The Standard KNX meter can be used for transformer measurement (1 and 5 A). The rating factor for the transformer meter can be defined in a wide range on the device.

The Standard KNX meter is an accumulating unidirectional meter for active energy reading supporting up to 4 tariffs.

The Superior KNX meter is an accumulating bidirectional meter that is also capable of reading reactive energy. It can be used for transformer measurement (1 and 5 A) and also supports up to 4 tariffs. In addition, it provides 4 switching outputs (230VAC, 90mA max.) that can be operated over the KNX bus.

12396
87774 EMU SUPERIOR KNX DIN RAIL METERS, TRANSFORMER 1/5 A SMART METERING
4364 89506 binary input (9-fold) universal (8 - 48 V AC/DC) INPUTS

The eibSOLO binary inputs (BE9F24/BE9F230) can generate bus telegrams on 9 independent channels.

The signal voltage for each channel may be between 8V and 48V (BE9F24) and 180V and 250V (BE9F230), AC or DC.

Each channel is connected to a screwless terminal. For each channel, an LED indicates the state of the signal, even without bus voltage.

Comprehensive application software allows each channel to be parameterized individually. A counting feature complements the switching, dimming, shutter control and value feature of the binary input. The switching feature can generate two separate  telegrams.

4364
89506 BINARY INPUT (9-FOLD) UNIVERSAL (8 - 48 V AC/DC) INPUTS
4365 89501 eibSOLO binary input 9f for switches INPUTS

The eibSOLO binary input BE9FK can generate bustelegrams on 9 independent channels. The sensing voltage required is supplied by the devices from bus voltage. This allows conventional, potential-free pushbuttons or switches to be directly connected. Each channel is connected to a screwless terminal. For each channel, an LED indicates the state of the signal.

Comprehensive application software allows each channel to be parameterized individually. A counting feature complements the switching, dimming, shutter control and value feature of the binary input. The switching feature can generate two separate
telegrams.

4365
89501 EIBSOLO BINARY INPUT 9F FOR SWITCHES INPUTS
4366 88401 power supply with choke 640mA SYSTEM DEVICES
The power supply unit provides the system power necessary for the bus system. The integrated choke prevents the data telegrams from short-circuiting on the bus line. The connection to the bus line is established by clicking the device onto the DIN-rail (installed data-rail) or by using the bus connection terminal (red-black) on the front side. The power supply unit NT640-4 can supply DC24V power from an additional pair of terminals (yellow-white). This DC24V output voltage is only allowed to power an additional line via a seperate choke.
4366
88401 POWER SUPPLY WITH CHOKE 640MA SYSTEM DEVICES
4387 88502 line coupler / backbone coupler SYSTEM DEVICES
The coupler can be used both as line coupler and as backbone coupler. As a line coupler, it connects an EIB line with a main line. As a backbone coupler, it connects a main line with a backbone line. The corresponding lines are then galvanically isolated from each other. A filter table determinies which telegrams are passed through the coupler. With the LK2 coupler the primary line is connected to a data rail, the LK2-2 coupler has bus terminals for both lines.
4387
88502 LINE COUPLER / BACKBONE COUPLER SYSTEM DEVICES
5668 89505 BINARY INPUT 9-FOLD 230V (180 - 250 V AC/DC) INPUTS

The eibSOLO binary inputs (BE9F24/BE9F230) can generate bus telegrams on 9 independent channels.

The signal voltage for each channel may be between 8V and 48V (BE9F24) and 180V and 250V (BE9F230), AC or DC.

Each channel is connected to a screwless terminal. For each channel, an LED indicates the state of the signal, even without bus voltage.

Comprehensive application software allows each channel to be parameterized individually. A counting feature complements the switching, dimming, shutter control and value feature of the binary input. The switching feature can generate two separate telegrams.

5668
89505 BINARY INPUT 9-FOLD 230V (180 - 250 V AC/DC) INPUTS
8891 89420 Shutter/Blind-Control Actuator Confort 4-fold ACTUATORS - OUTPUTS

The eibSOLO 4-fold shutter/blind-control actuator can control 4 independent shutter/blind motors.

The load for each channel is 6A at 250V AC, each channel can be assigned its own mains phase. Each channel is connected to a screwless twin terminal,

which allows the phase to be looped through in compliance with existing regulations. Each channel can also be operated manually without bus voltage.

8891
89420 SHUTTER/BLIND-CONTROL ACTUATOR CONFORT 4-FOLD ACTUATORS - OUTPUTS
8892 89421 Shutter/Blind-Control Actuator 6-fold J6F6H-2 ACTUATORS - OUTPUTS
The eibSOLO 6-fold shutter/blind-control actuator can control 6 independent shutter/blind motors. The load for each channel is 6A at 250V AC, each channel can be assigned its own mains phase. Each channel is connected to a screwless twin terminal, which allows the phase to be looped through in compliance with existing regulations. Each channel can also be operated manually without bus voltage.
8892
89421 SHUTTER/BLIND-CONTROL ACTUATOR 6-FOLD J6F6H-2 ACTUATORS - OUTPUTS
9154 89607 Universal dimmer 2- gang 570W ACTUATORS - OUTPUTS
The universal dimmer DIM2FU can independently dim 2 load circuits. The device automatically detects the type of load and correspondingly the required dimming action with either forward or reverse phase cut.

The max. switch-on-current for each channel should not exceed a load of 13A.

Each circuit permits a load of up to 570 W / VA, optionally combined with mixed operation of both channels: in case higher loads need to be dimmed, a pair of dimming channels may be merged; in this way, an output power of 1x 1140 W / VA can be controlled.

The robust metal housing also serves to cool the devices, by securely transporting off any possible heat load and thus guarding the device.

Overvoltage, current or temperature overload are detected to further ensure optimal protection.

With a single-button control on the top side of the device, each channel may be dimmed manually (without Bus voltage). This obviously allows the testing of the connect load circuit without any bus programming and simplifies servicing.

While allowing for a different number of load circuits, the flexible application software is identical for both versions of the dimming actuator, which once more simplifies design and configuration.

Apart from the usual dimming functions, two mood lighting scenes and two sequenced control commands are available, along with locking and switching. Just like all other parameter settings, extended status and error reporting can be enabled per channel, completing praxis oriented usage.
9154
89607 UNIVERSAL DIMMER 2- GANG 570W ACTUATORS - OUTPUTS
9453 87101 FACILITY WEB pipe/duct temperature sensor 135mm KTF99-135-FW SENSORS
The sensors of the DIGITEMP series measure temperature values for the bus is achieved with the standard KNX/EIB connectors inside the heating, ventilation and air-conditioning applications. A typical examples is housing. In addition to a constant action controller the digitemp devices air intake (fresh air) and exhaust ducts, heating supply and return water provide 2 higher and 2 lower bound thresholds, which can be used temperatures and similar, as well as temperatures in rooms and buildings, individually or as two 2-step controllers. These thresholds can trigger both in- and outside, like living quarters or storage depots. Our solutions switching actions (telegrams) on the bus. The group A threshold values comprise a damp environment sensor, contact sensor, room temperature and the setpoint value (in controller mode) can be set or modified directly via sensor, a channel or duct sensor and a pipe mounting sensor. Covering the (group) telegrams on the bus. Optionally a live check (sensor status) report wide range of -55 … +125° C, they readily capture temperature values for is transmitted cyclically during correct operation of the sensor. Type / Application: duct sensors KTF99-xxx / measures temperatures in immersion sleeves or ventilation ducts Properties: · temperature range -55 … +125°C · 4 independent thresholds · integrated temperature contoller · complete FacilityWeb functionality in connection with NK-FW-xx. · integrated data logging for 1-year · thresholds adjustable by browser · RTFF10-FW including humidity measurement (without integrated temperature controller) · HTTP-protocol, dedicated homepage immersion sleeve and mounting accessories on request
9453
87101 FACILITY WEB PIPE/DUCT TEMPERATURE SENSOR 135MM KTF99-135-FW SENSORS
9454 87102 FACILITY WEB pipe/duct temperature sensor 240mm KTF99-240-FW SENSORS
The sensors of the DIGITEMP series measure temperature values for the bus is achieved with the standard KNX/EIB connectors inside the heating, ventilation and air-conditioning applications. A typical examples is housing. In addition to a constant action controller the digitemp devices air intake (fresh air) and exhaust ducts, heating supply and return water provide 2 higher and 2 lower bound thresholds, which can be used temperatures and similar, as well as temperatures in rooms and buildings, individually or as two 2-step controllers. These thresholds can trigger both in- and outside, like living quarters or storage depots. Our solutions switching actions (telegrams) on the bus. The group A threshold values comprise a damp environment sensor, contact sensor, room temperature and the setpoint value (in controller mode) can be set or modified directly via sensor, a channel or duct sensor and a pipe mounting sensor. Covering the (group) telegrams on the bus. Optionally a live check (sensor status) report wide range of -55 … +125° C, they readily capture temperature values for is transmitted cyclically during correct operation of the sensor. Type / Application:: duct sensors KTF99-xxx / measures temperatures in immersion sleeves or ventilation ducts Properties: · temperature range -55 … +125°C · 4 independent thresholds · integrated temperature contoller · complete FacilityWeb functionality in connection with NK-FW-xx. · integrated data logging for 1-year · thresholds adjustable by browser · RTFF10-FW including humidity measurement (without integrated temperature controller) · HTTP-protocol, dedicated homepage immersion sleeve and mounting accessories on request
9454
87102 FACILITY WEB PIPE/DUCT TEMPERATURE SENSOR 240MM KTF99-240-FW SENSORS
9455 87103 FACILITY WEB pipe/duct temperature sensor 392mm KTF99-392-FW SENSORS
The sensors of the DIGITEMP series measure temperature values for the bus is achieved with the standard KNX/EIB connectors inside the heating, ventilation and air-conditioning applications. A typical examples is housing. In addition to a constant action controller the digitemp devices air intake (fresh air) and exhaust ducts, heating supply and return water provide 2 higher and 2 lower bound thresholds, which can be used temperatures and similar, as well as temperatures in rooms and buildings, individually or as two 2-step controllers. These thresholds can trigger both in- and outside, like living quarters or storage depots. Our solutions switching actions (telegrams) on the bus. The group A threshold values comprise a damp environment sensor, contact sensor, room temperature and the setpoint value (in controller mode) can be set or modified directly via sensor, a channel or duct sensor and a pipe mounting sensor. Covering the (group) telegrams on the bus. Optionally a live check (sensor status) report wide range of -55 … +125° C, they readily capture temperature values for is transmitted cyclically during correct operation of the sensor. Type / Application:: duct sensors KTF99-xxx / measures temperatures in immersion sleeves or ventilation ducts Properties: · temperature range -55 … +125°C · 4 independent thresholds · integrated temperature contoller · complete FacilityWeb functionality in connection with NK-FW-xx. · integrated data logging for 1-year · thresholds adjustable by browser · RTFF10-FW including humidity measurement (without integrated temperature controller) · HTTP-protocol, dedicated homepage immersion sleeve and mounting accessories on request
9455
87103 FACILITY WEB PIPE/DUCT TEMPERATURE SENSOR 392MM KTF99-392-FW SENSORS
9456 87104 FACILITY WEB cable sensor 1m LTF02-1m-FW SENSORS
The sensors of the DIGITEMP series measure temperature values for the bus is achieved with the standard KNX/EIB connectors inside the heating, ventilation and air-conditioning applications. A typical examples is housing. In addition to a constant action controller the digitemp devices air intake (fresh air) and exhaust ducts, heating supply and return water provide 2 higher and 2 lower bound thresholds, which can be used temperatures and similar, as well as temperatures in rooms and buildings, individually or as two 2-step controllers. These thresholds can trigger both in- and outside, like living quarters or storage depots. Our solutions switching actions (telegrams) on the bus. The group A threshold values comprise a damp environment sensor, contact sensor, room temperature and the setpoint value (in controller mode) can be set or modified directly via sensor, a channel or duct sensor and a pipe mounting sensor. Covering the (group) telegrams on the bus. Optionally a live check (sensor status) report wide range of -55 … +125° C, they readily capture temperature values for is transmitted cyclically during correct operation of the sensor. Type / Application:: cable sensors LTF02-xx measures temperatures in immersion sleeves or ventilation ducts Properties: · temperature range -55 … +125°C · 4 independent thresholds · integrated temperature contoller · complete FacilityWeb functionality in connection with NK-FW-xx. · integrated data logging for 1-year · thresholds adjustable by browser · RTFF10-FW including humidity measurement (without integrated temperature controller) · HTTP-protocol, dedicated homepage immersion sleeve and mounting accessories on request
9456
87104 FACILITY WEB CABLE SENSOR 1M LTF02-1M-FW SENSORS
9457 87105 FACILITY WEB cable sensor 3m LTF02-3m-FW SENSORS
The sensors of the DIGITEMP series measure temperature values for the bus is achieved with the standard KNX/EIB connectors inside the heating, ventilation and air-conditioning applications. A typical examples is housing. In addition to a constant action controller the digitemp devices air intake (fresh air) and exhaust ducts, heating supply and return water provide 2 higher and 2 lower bound thresholds, which can be used temperatures and similar, as well as temperatures in rooms and buildings, individually or as two 2-step controllers. These thresholds can trigger both in- and outside, like living quarters or storage depots. Our solutions switching actions (telegrams) on the bus. The group A threshold values comprise a damp environment sensor, contact sensor, room temperature and the setpoint value (in controller mode) can be set or modified directly via sensor, a channel or duct sensor and a pipe mounting sensor. Covering the (group) telegrams on the bus. Optionally a live check (sensor status) report wide range of -55 … +125° C, they readily capture temperature values for is transmitted cyclically during correct operation of the sensor. Type / Application:: cable sensors LTF02-xx measures temperatures in immersion sleeves or ventilation ducts Properties: · temperature range -55 … +125°C · 4 independent thresholds · integrated temperature contoller · complete FacilityWeb functionality in connection with NK-FW-xx. · integrated data logging for 1-year · thresholds adjustable by browser · RTFF10-FW including humidity measurement (without integrated temperature controller) · HTTP-protocol, dedicated homepage immersion sleeve and mounting accessories on request
9457
87105 FACILITY WEB CABLE SENSOR 3M LTF02-3M-FW SENSORS
9458 87120 FACILITY WEB damp environment sensor FRF99-FW SENSORS
The sensors of the DIGITEMP series measure temperature values for the bus is achieved with the standard KNX/EIB connectors inside the heating, ventilation and air-conditioning applications. A typical examples is housing. In addition to a constant action controller the digitemp devices air intake (fresh air) and exhaust ducts, heating supply and return water provide 2 higher and 2 lower bound thresholds, which can be used temperatures and similar, as well as temperatures in rooms and buildings, individually or as two 2-step controllers. These thresholds can trigger both in- and outside, like living quarters or storage depots. Our solutions switching actions (telegrams) on the bus. The group A threshold values comprise a damp environment sensor, contact sensor, room temperature and the setpoint value (in controller mode) can be set or modified directly via sensor, a channel or duct sensor and a pipe mounting sensor. Covering the (group) telegrams on the bus. Optionally a live check (sensor status) report wide range of -55 … +125° C, they readily capture temperature values for is transmitted cyclically during correct operation of the sensor. Type / Application:: damp enviroment sensor FRF99 measures temperatures in damp environments as, for example, in warehouses Properties: · temperature range -55 … +125°C · 4 independent thresholds · integrated temperature contoller · complete FacilityWeb functionality in connection with NK-FW-xx. · integrated data logging for 1-year · thresholds adjustable by browser · RTFF10-FW including humidity measurement (without integrated temperature controller) · HTTP-protocol, dedicated homepage immersion sleeve and mounting accessories on request
9458
87120 FACILITY WEB DAMP ENVIRONMENT SENSOR FRF99-FW SENSORS
9459 87130 FACILITY WEB pipe mounting sensor ANF99-FW SENSORS
The sensors of the DIGITEMP series measure temperature values for the bus is achieved with the standard KNX/EIB connectors inside the heating, ventilation and air-conditioning applications. A typical examples is housing. In addition to a constant action controller the digitemp devices air intake (fresh air) and exhaust ducts, heating supply and return water provide 2 higher and 2 lower bound thresholds, which can be used temperatures and similar, as well as temperatures in rooms and buildings, individually or as two 2-step controllers. These thresholds can trigger both in- and outside, like living quarters or storage depots. Our solutions switching actions (telegrams) on the bus. The group A threshold values comprise a damp environment sensor, contact sensor, room temperature and the setpoint value (in controller mode) can be set or modified directly via sensor, a channel or duct sensor and a pipe mounting sensor. Covering the (group) telegrams on the bus. Optionally a live check (sensor status) report wide range of -55 … +125° C, they readily capture temperature values for is transmitted cyclically during correct operation of the sensor. Type / Application: pipe mounting sensor ANF99 / measures temperatures on pipes Properties: · temperature range -55 … +125°C · 4 independent thresholds · integrated temperature contoller · complete FacilityWeb functionality in connection with NK-FW-xx. · integrated data logging for 1-year · thresholds adjustable by browser · RTFF10-FW including humidity measurement (without integrated temperature controller) · HTTP-protocol, dedicated homepage immersion sleeve and mounting accessories on request
9459
87130 FACILITY WEB PIPE MOUNTING SENSOR ANF99-FW SENSORS
9460 87140 FACILITY WEB indoor sensor RTF99-FW SENSORS
The sensors of the DIGITEMP series measure temperature values for the bus is achieved with the standard KNX/EIB connectors inside the heating, ventilation and air-conditioning applications. A typical examples is housing. In addition to a constant action controller the digitemp devices air intake (fresh air) and exhaust ducts, heating supply and return water provide 2 higher and 2 lower bound thresholds, which can be used temperatures and similar, as well as temperatures in rooms and buildings, individually or as two 2-step controllers. These thresholds can trigger both in- and outside, like living quarters or storage depots. Our solutions switching actions (telegrams) on the bus. The group A threshold values comprise a damp environment sensor, contact sensor, room temperature and the setpoint value (in controller mode) can be set or modified directly via sensor, a channel or duct sensor and a pipe mounting sensor. Covering the (group) telegrams on the bus. Optionally a live check (sensor status) report wide range of -55 … +125° C, they readily capture temperature values for is transmitted cyclically during correct operation of the sensor. Type / Application:: indoor temperature sensor RTF99 sensor for wall-mounting in dry indoor environments Properties: · temperature range -55 … +125°C · 4 independent thresholds · integrated temperature contoller · complete FacilityWeb functionality in connection with NK-FW-xx. · integrated data logging for 1-year · thresholds adjustable by browser · RTFF10-FW including humidity measurement (without integrated temperature controller) · HTTP-protocol, dedicated homepage immersion sleeve and mounting accessories on request
9460
87140 FACILITY WEB INDOOR SENSOR RTF99-FW SENSORS
10130 88407 power supply unit 160 mA SYSTEM DEVICES
The power supply unit provides the system power necessary for the bus system.

The integrated choke prevents the data telegrams from short-circuiting on the bus line.

The connection to the bus line is established by clicking the device onto the DIN-rail (installed data-rail) or by using the bus connection terminal (red-black) on the front side.
10130
88407 POWER SUPPLY UNIT 160 MA SYSTEM DEVICES
10131 88406 power supply 320 mA SYSTEM DEVICES
The power supply unit provides the system power necessary for the bus system.

The integrated choke prevents the data telegrams from short-circuiting on the bus line.

The connection to the bus line is established by clicking the device onto the DIN-rail (installed data-rail) or by using the bus connection terminal (red-black) on the front side.
10131
88406 POWER SUPPLY 320 MA SYSTEM DEVICES
10132 88405 power supply with choke 640mA SYSTEM DEVICES
The power supply unit provides the system power necessary for the bus system. The integrated choke prevents the data telegrams from short-circuiting on the bus line. The connection to the bus line is established by clicking the device onto the DIN-rail (installed data-rail) or by using the bus connection terminal (red-black) on the front side. The power
supply unit NT640-4 can supply DC24V power from an additional pair of terminals (yellow-white). This DC24V output voltage is only allowed to power an additional line via a seperate choke.
10132
88405 POWER SUPPLY WITH CHOKE 640MA SYSTEM DEVICES
10182 85801 KNX GAS METER, 0,04-6 m³/h, DN 25 (Type: BK-GxA / AE2) SMART METERING
Properties:
· Diaphragm Gas Meter
· Including integrated KNX Interface
· Full FacilityWeb functionality in connection with NK-FW-xx
· HTTP-protocol, dedicated homepage
· integrated data logging for 1-year


- Original Manufacturer: Elster-Instromet
- Meter type and description: BK-diaphragm GxxxAT with absolute ENCODER index AE2

Nominal diameter: G4 DN25
Measuring range: 0,04-6 m³/h

Other dimensions on request

10182
85801 KNX GAS METER, 0,04-6 M³/H, DN 25 (TYPE: BK-GXA / AE2) SMART METERING
10200 87150 FACILITY WEB indoor temp./ humid. sensor RTFF10-FW SENSORS
The sensors of the DIGITEMP series measure temperature values for the bus is achieved with the standard KNX/EIB connectors inside the heating, ventilation and air-conditioning applications. A typical examples is housing. In addition to a constant action controller the digitemp devices air intake (fresh air) and exhaust ducts, heating supply and return water provide 2 higher and 2 lower bound thresholds, which can be used temperatures and similar, as well as temperatures in rooms and buildings, individually or as two 2-step controllers. These thresholds can trigger both in- and outside, like living quarters or storage depots. Our solutions switching actions (telegrams) on the bus. The group A threshold values comprise a damp environment sensor, contact sensor, room temperature and the setpoint value (in controller mode) can be set or modified directly via sensor, a channel or duct sensor and a pipe mounting sensor. Covering the (group) telegrams on the bus. Optionally a live check (sensor status) report wide range of -55 … +125° C, they readily capture temperature values for is transmitted cyclically during correct operation of the sensor. Properties: · temperature range -55 … +125°C · 4 independent thresholds · integrated temperature contoller · complete FacilityWeb functionality in connection with NK-FW-xx. · integrated data logging for 1-year · thresholds adjustable by browser · RTFF10-FW including humidity measurement (without integrated temperature controller) · HTTP-protocol, dedicated homepage immersion sleeve and mounting accessories on request
10200
87150 FACILITY WEB INDOOR TEMP./ HUMID. SENSOR RTFF10-FW SENSORS
10201 85101 KNX FacilityWeb cold / warm water meters (Qn= 1,5m³/h , 80mm bei 16bar , 3/4”= DN15mm , 40°C) SMART METERING
Household water meters

Manufacturer: Andrae

· single-jet dry runner water meter
· including KNX-interface in separate, wall mounted box
· full FacilityWeb functionality in connection with NK-FW-xx
· HTTP-protocol, dedicated homepage
· integrated data logging for 1-year


Nominal flow: Qn= 1,5m³/h
Length : 80mm - 16bar
Connection thread: 3/4”= DN15mm
max.temp.: 40°C

prices including calibration fee
other dimensions on request
10201
85101 KNX FACILITYWEB COLD / WARM WATER METERS (QN= 1,5M³/H , 80MM BEI 16BAR , 3/4”= DN15MM , 40°C) SMART METERING
10202 85102 KNX FacilityWeb cold / warm water meters (Qn= 1,5m³/h ,110mm - 16bar , 3/4”= DN15mm , 40°C) SMART METERING
Household water meters

Manufacturer: Andrae

· single-jet dry runner water meter
· including KNX-interface in separate, wall mounted box
· full FacilityWeb functionality in connection with NK-FW-xx
· HTTP-protocol, dedicated homepage
· integrated data logging for 1-year


Nominal flow: Qn= 1,5m³/h
Length : 110mm - 16bar
Connection thread: 3/4”= DN15mm
max.temp.: 40°C

prices including calibration fee
other dimensions on request
10202
85102 KNX FACILITYWEB COLD / WARM WATER METERS (QN= 1,5M³/H ,110MM - 16BAR , 3/4”= DN15MM , 40°C) SMART METERING
10203 85103 KNX FacilityWeb cold / warm water meters (Qn= 2,5m³/h,130mm 16bar, 1”= DN20mm, 40°C) SMART METERING
Household water meters

Manufacturer: Andrae

· single-jet dry runner water meter
· including KNX-interface in separate, wall mounted box
· full FacilityWeb functionality in connection with NK-FW-xx
· HTTP-protocol, dedicated homepage
· integrated data logging for 1-year


Nominal flow: Qn= 2,5m³/h
Length : 130mm - 16bar
Connection thread: 1”= DN20mm
max.temp.: 40°C

prices including calibration fee
other dimensions on request
10203
85103 KNX FACILITYWEB COLD / WARM WATER METERS (QN= 2,5M³/H,130MM 16BAR, 1”= DN20MM, 40°C) SMART METERING
10204 85111 KNX FacilityWeb cold / warm water meters (Qn= 1,5m³/h , 80mm bei 16bar , 3/4”= DN15mm , 90°C) SMART METERING
Household water meters

Manufacturer: Andrae

· single-jet dry runner water meter
· including KNX-interface in separate, wall mounted box
· full FacilityWeb functionality in connection with NK-FW-xx
· HTTP-protocol, dedicated homepage
· integrated data logging for 1-year


Nominal flow: Qn= 1,5m³/h
Length : 80mm - 16bar
Connection thread: 3/4”= DN15mm
max.temp.: 90°C

prices including calibration fee
other dimensions on request
10204
85111 KNX FACILITYWEB COLD / WARM WATER METERS (QN= 1,5M³/H , 80MM BEI 16BAR , 3/4”= DN15MM , 90°C) SMART METERING
10205 85112 KNX FacilityWeb cold / warm water meters (Qn= 1,5m³/h ,110mm - 16bar , 3/4”= DN15mm , 90°C) SMART METERING
Household water meters

Manufacturer: Andrae

· single-jet dry runner water meter
· including KNX-interface in separate, wall mounted box
· full FacilityWeb functionality in connection with NK-FW-xx
· HTTP-protocol, dedicated homepage
· integrated data logging for 1-year


Nominal flow: Qn= 1,5m³/h
Length : 110mm - 16bar
Connection thread: 3/4”= DN15mm
max.temp.: 90°C

prices including calibration fee
other dimensions on request
10205
85112 KNX FACILITYWEB COLD / WARM WATER METERS (QN= 1,5M³/H ,110MM - 16BAR , 3/4”= DN15MM , 90°C) SMART METERING
10206 85113 KNX FacilityWeb cold / warm water meters (Qn= 2,5m³/h,130mm 16bar, 1”= DN20mm, 90°C) SMART METERING
Household water meters

Manufacturer: Andrae

· single-jet dry runner water meter
· including KNX-interface in separate, wall mounted box
· full FacilityWeb functionality in connection with NK-FW-xx
· HTTP-protocol, dedicated homepage
· integrated data logging for 1-year


Nominal flow: Qn= 2,5m³/h
Length : 130mm - 16bar
Connection thread: 1”= DN20mm
max.temp.: 90°C

prices including calibration fee
other dimensions on request
10206
85113 KNX FACILITYWEB COLD / WARM WATER METERS (QN= 2,5M³/H,130MM 16BAR, 1”= DN20MM, 90°C) SMART METERING
10207 85140 KNX FacilityWeb cold / warm water meters (Qn= 2,5m³/h,190mm, G1B, 40°C) SMART METERING
water meters (type MTK-HWX)

Manufacturer: Andrae

· multi-jet water meter
· including KNX-interface in separate, wall mounted box
· full FacilityWeb functionality in connection with NK-FW-xx
· HTTP-protocol, dedicated homepage
· integrated data logging for 1-year


Nominal flow: Qn= 2,5m³/h
Length : 190mm
Connection thread: G1B
max.temp.: 40°C

prices including calibration fee
other dimensions on request
10207
85140 KNX FACILITYWEB COLD / WARM WATER METERS (QN= 2,5M³/H,190MM, G1B, 40°C) SMART METERING
10208 85141 KNX FacilityWeb cold / warm water meters (Qn= 6 m³/h, 260mm, G1-1/4 B, 40°C) SMART METERING
water meters (type MTK-HWX)

Manufacturer: Andrae

· multi-jet water meter
· including KNX-interface in separate, wall mounted box
· full FacilityWeb functionality in connection with NK-FW-xx
· HTTP-protocol, dedicated homepage
· integrated data logging for 1-year


Nominal flow: Qn= 6m³/h
Length : 260mm
Connection thread: G1-1/4 B
max.temp.: 40°C

prices including calibration fee
other dimensions on request
10208
85141 KNX FACILITYWEB COLD / WARM WATER METERS (QN= 6 M³/H, 260MM, G1-1/4 B, 40°C) SMART METERING
10209 85142 KNX FacilityWeb cold / warm water meters (Qn= 10 m³/h ,300mm, G2B, 40°C) SMART METERING
water meters (type MTK-HWX)

Manufacturer: Andrae

· multi-jet water meter
· including KNX-interface in separate, wall mounted box
· full FacilityWeb functionality in connection with NK-FW-xx
· HTTP-protocol, dedicated homepage
· integrated data logging for 1-year


Nominal flow: Qn= 10m³/h
Length : 300mm
Connection thread: G2 B
max.temp.: 40°C

prices including calibration fee
other dimensions on request
10209
85142 KNX FACILITYWEB COLD / WARM WATER METERS (QN= 10 M³/H ,300MM, G2B, 40°C) SMART METERING
10210 85150 KNX FacilityWeb cold / warm water meters (Qn= 2,5m³/h,190mm, G1B, 90°C) SMART METERING
water meters (type MTK-HWX)

Manufacturer: Andrae

· multi-jet water meter
· including KNX-interface in separate, wall mounted box
· full FacilityWeb functionality in connection with NK-FW-xx
· HTTP-protocol, dedicated homepage
· integrated data logging for 1-year


Nominal flow: Qn= 2,5m³/h
Length : 190mm
Connection thread: G1B
max.temp.: 90°C

prices including calibration fee
other dimensions on request
10210
85150 KNX FACILITYWEB COLD / WARM WATER METERS (QN= 2,5M³/H,190MM, G1B, 90°C) SMART METERING
10211 85151 KNX FacilityWeb cold / warm water meters (Qn= 6 m³/h, 260mm, G1-1/4 B, 90°C) SMART METERING
water meters (type MTK-HWX)

Manufacturer: Andrae

· multi-jet water meter
· including KNX-interface in separate, wall mounted box
· full FacilityWeb functionality in connection with NK-FW-xx
· HTTP-protocol, dedicated homepage
· integrated data logging for 1-year


Nominal flow: Qn= 6m³/h
Length : 260mm
Connection thread: G1-1/4 B
max.temp.: 90°C

prices including calibration fee
other dimensions on request
10211
85151 KNX FACILITYWEB COLD / WARM WATER METERS (QN= 6 M³/H, 260MM, G1-1/4 B, 90°C) SMART METERING
10212 85152 KNX FacilityWeb cold / warm water meters (Qn= 10 m³/h ,300mm, G2B, 90°C) SMART METERING
water meters (type MTK-HWX)

Manufacturer: Andrae

· multi-jet water meter
· including KNX-interface in separate, wall mounted box
· full FacilityWeb functionality in connection with NK-FW-xx
· HTTP-protocol, dedicated homepage
· integrated data logging for 1-year


Nominal flow: Qn= 10m³/h
Length : 300mm
Connection thread: G2 B
max.temp.: 90°C

prices including calibration fee
other dimensions on request
10212
85152 KNX FACILITYWEB COLD / WARM WATER METERS (QN= 10 M³/H ,300MM, G2B, 90°C) SMART METERING
10213 85010 KNX FacilityWeb cold / warm water meters (Qn= 1,5m³/h, 110mm, DN15, G3/4”, 30°C) SMART METERING
electronic water meters, type Corona E

Manufacturer: Hydrometer

· multi-jet dry runner electronic water meter
· electronic display for meter readout
· including KNX-interface in separate, wall mounted box
· full FacilityWeb functionality in connection with NK-FW-xx
· HTTP-protocol, dedicated homepage
· integrated data logging for 1-year


Nominal flow: Qn= 1,5m³/h
Length : 110mm
Connection thread: DN15 , G3/4
max.temp.: 30°C
Direction: any

prices including calibration fee
other dimensions on request

10213
85010 KNX FACILITYWEB COLD / WARM WATER METERS (QN= 1,5M³/H, 110MM, DN15, G3/4”, 30°C) SMART METERING
10214 85011 KNX FacilityWeb cold / warm water meters (Qn= 1,5m³/h, 110mm, DN15, G3/4”, 90°C) SMART METERING
electronic water meters, type Corona E Manufacturer: Hydrometer · multi-jet dry runner electronic water meter · electronic display for meter readout · including KNX-interface in separate, wall mounted box · full FacilityWeb functionality in connection with NK-FW-xx · HTTP-protocol, dedicated homepage · integrated data logging for 1-year Nominal flow: Qn= 1,5m³/h Length : 110mm Connection thread: DN15 , G3/4 max.temp.: 90°C Direction: any prices including calibration fee other dimensions on request
10214
85011 KNX FACILITYWEB COLD / WARM WATER METERS (QN= 1,5M³/H, 110MM, DN15, G3/4”, 90°C) SMART METERING
10215 85030 KNX FacilityWeb cold / warm water meters (Qn= 2,5m³/h, 130mm, DN20, G1”, 30°C) SMART METERING
electronic water meters, type Corona E Manufacturer: Hydrometer · multi-jet dry runner electronic water meter · electronic display for meter readout · including KNX-interface in separate, wall mounted box · full FacilityWeb functionality in connection with NK-FW-xx · HTTP-protocol, dedicated homepage · integrated data logging for 1-year Nominal flow: Qn= 2,5m³/h Length : 130mm Connection thread: DN20 , G1 max.temp.: 30°C Direction: horizontal prices including calibration fee other dimensions on request
10215
85030 KNX FACILITYWEB COLD / WARM WATER METERS (QN= 2,5M³/H, 130MM, DN20, G1”, 30°C) SMART METERING
10216 85031 KNX FacilityWeb cold / warm water meters (Qn= 2,5m³/h, 130mm, DN20, G1”, 90°C) SMART METERING
electronic water meters, type Corona E Manufacturer: Hydrometer · multi-jet dry runner electronic water meter · electronic display for meter readout · including KNX-interface in separate, wall mounted box · full FacilityWeb functionality in connection with NK-FW-xx · HTTP-protocol, dedicated homepage · integrated data logging for 1-year Nominal flow: Qn= 2,5m³/h Length : 130mm Connection thread: DN20 , G1 max.temp.: 90°C Direction: horizontal prices including calibration fee other dimensions on request
10216
85031 KNX FACILITYWEB COLD / WARM WATER METERS (QN= 2,5M³/H, 130MM, DN20, G1”, 90°C) SMART METERING
10218 85040 KNX FacilityWeb cold / warm water meters (Qn= 2,5m³/h, 190mm, DN20, G1”, 30°C) SMART METERING
electronic water meters, type Corona E Manufacturer: Hydrometer · multi-jet dry runner electronic water meter · electronic display for meter readout · including KNX-interface in separate, wall mounted box · full FacilityWeb functionality in connection with NK-FW-xx · HTTP-protocol, dedicated homepage · integrated data logging for 1-year Nominal flow: Qn= 2,5m³/h Length : 190mm Connection thread: DN20 , G1 max.temp.: 30°C Direction: horizontal prices including calibration fee other dimensions on request
10218
85040 KNX FACILITYWEB COLD / WARM WATER METERS (QN= 2,5M³/H, 190MM, DN20, G1”, 30°C) SMART METERING
10220 85050 KNX FacilityWeb cold / warm water meters (Qn= 2,5m³/h, 105mm, DN20, G1”, 30°C) SMART METERING
electronic water meters, type Corona E Manufacturer: Hydrometer · multi-jet dry runner electronic water meter · electronic display for meter readout · including KNX-interface in separate, wall mounted box · full FacilityWeb functionality in connection with NK-FW-xx · HTTP-protocol, dedicated homepage · integrated data logging for 1-year Nominal flow: Qn= 2,5m³/h Length : 105mm Connection thread: DN20 , G1 max.temp.: 30°C Direction: standpipe prices including calibration fee other dimensions on request
10220
85050 KNX FACILITYWEB COLD / WARM WATER METERS (QN= 2,5M³/H, 105MM, DN20, G1”, 30°C) SMART METERING
10221 85051 KNX FacilityWeb cold / warm water meters (Qn= 2,5m³/h, 105mm, DN20, G1”, 90°C) SMART METERING
electronic water meters, type Corona E Manufacturer: Hydrometer · multi-jet dry runner electronic water meter · electronic display for meter readout · including KNX-interface in separate, wall mounted box · full FacilityWeb functionality in connection with NK-FW-xx · HTTP-protocol, dedicated homepage · integrated data logging for 1-year Nominal flow: Qn= 2,5m³/h Length : 105mm Connection thread: DN20 , G1 max.temp.: 90°C Direction: standpipe prices including calibration fee other dimensions on request
10221
85051 KNX FACILITYWEB COLD / WARM WATER METERS (QN= 2,5M³/H, 105MM, DN20, G1”, 90°C) SMART METERING
10959 87799 KNX interfaces for energy meter EZ162/382/351 SMART METERING
KNX interfaces for energy meter Kamstrup EZ162/382/351
10959
87799 KNX INTERFACES FOR ENERGY METER EZ162/382/351 SMART METERING
16214 87950 Direct reading KNX interface for meters with mechanical counters (electricity meter) SMART METERING

• optical sensor unit with LED-lighting for the identification of counting devices up to 50mm width, min. figure height 5mm

• max. 8 digits, one decimal place, display push-button operated

• KNX interface in DIN rail mounting device (2 RU) and KNX bus connector

• integrated data logger stores the measured data over a period of one year

• TCP/IP protocol (via KN-FW)

• full FacilityWeb functionality

• low energy consumption

 

16214
87950 DIRECT READING KNX INTERFACE FOR METERS WITH MECHANICAL COUNTERS (ELECTRICITY METER) SMART METERING
16215 87951 Direct reading KNX interface for meters with mechanical counters (oil meter) SMART METERING

• optical sensor unit with LED-lighting for the identification of counting devices up to 50mm width, min. figure height 5mm

• max. 8 digits, one decimal place, display push-button operated

• KNX interface in DIN rail mounting device (2 RU) and KNX bus connector

• integrated data logger stores the measured data over a period of one year

• TCP/IP protocol (via KN-FW)

• full FacilityWeb functionality

• low energy consumption

 

16215
87951 DIRECT READING KNX INTERFACE FOR METERS WITH MECHANICAL COUNTERS (OIL METER) SMART METERING
16830 79531 ECO+, Binary input 4-gang, potential free, 4 chanels, 4 rail units, SIN FAMILIA

Binary input 4-gang

with contact status
• Variations:
• with contact status sensor, potential free - max. cable length 100 m
• 230 V, signal voltage for each channel 230 V AC/DC
• 4 chanels
• 4 rail units

 

16830
79531 ECO+, BINARY INPUT 4-GANG, POTENTIAL FREE, 4 CHANELS, 4 RAIL UNITS, SIN FAMILIA
16831 79532 ECO+, Binary input 4-gang, 250VAC, 4 chanels, 4 rail units, SIN FAMILIA

binary input 230 V

• Variations:
• with contact status sensor, potential free - max. cable length 100 m
• 230 V, signal voltage for each channel 230 V AC/DC
• 4 chanels
• 4 rail units

16831
79532 ECO+, BINARY INPUT 4-GANG, 250VAC, 4 CHANELS, 4 RAIL UNITS, SIN FAMILIA
17299 TS4F-2-E ECO +, Push button interface for 4 single buttons INPUTS
• with separate wire connectors
• rocker function or single buttons points are programmable
• available in 3 variations:
• 4 single buttons with or without LEDs or 8 single buttons
17299
TS4F-2-E ECO +, PUSH BUTTON INTERFACE FOR 4 SINGLE BUTTONS INPUTS
17300 TS8F-2-E ECO +, Push button interface for 8 single buttons INPUTS
• with separate wire connectors
• rocker function or single buttons points are programmable
• available in 3 variations:
• 4 single buttons with or without LEDs or 8 single buttons
17300
TS8F-2-E ECO +, PUSH BUTTON INTERFACE FOR 8 SINGLE BUTTONS INPUTS
17423 A2F16H-E ECO+, Switching actuator, 2 chanels, 16A, C-Load, 3U, manual operation SIN FAMILIA

Switching actuator

- 2, 4, 6 or 9 chanels
- switching capacity 16 A with 250 V AC
- suitable for C-load
- 3, 4, 6 or 9 rail units

17423
A2F16H-E ECO+, SWITCHING ACTUATOR, 2 CHANELS, 16A, C-LOAD, 3U, MANUAL OPERATION SIN FAMILIA
17424 A4F16H-E ECO+, Switching actuator, 4 chanels, 16A, C-Load, 4U, manual operation SIN FAMILIA

Switching actuator

- 2, 4, 6 or 9 chanels
- switching capacity 16 A with 250 V AC
- suitable for C-load
- 3, 4, 6 or 9 rail units

17424
A4F16H-E ECO+, SWITCHING ACTUATOR, 4 CHANELS, 16A, C-LOAD, 4U, MANUAL OPERATION SIN FAMILIA
17425 A6F16H-E ECO+, Switching actuator, 6 chanels, 16A, C-Load, 6U, manual operation SIN FAMILIA

Switching actuator

- 2, 4, 6 or 9 chanels
- switching capacity 16 A with 250 V AC
- suitable for C-load
- 3, 4, 6 or 9 rail units

17425
A6F16H-E ECO+, SWITCHING ACTUATOR, 6 CHANELS, 16A, C-LOAD, 6U, MANUAL OPERATION SIN FAMILIA
17426 A9F16H-E ECO+, Switching actuator, 9 chanels, 16A, C-Load, 9U, manual operation SIN FAMILIA

Switching actuator

- 2, 4, 6 or 9 chanels
- switching capacity 16 A with 250 V AC
- suitable for C-load
- 3, 4, 6 or 9 rail units

17426
A9F16H-E ECO+, SWITCHING ACTUATOR, 9 CHANELS, 16A, C-LOAD, 9U, MANUAL OPERATION SIN FAMILIA
17427 AH3F16H-E ECO+, Switching actuator, 3 chanels, 16A, 3U, manual operation ACTUATORS - OUTPUTS

Switching actuator, 3 chanels, 16A, 3U, manual operation

eco+

The eco+ product range by Lingg & Janke is convincing through its outstanding price-performance ratio. eco+ offers a wide range of KNX standard products like switching actuators, blind / shutter actuator and binary inputs.

The advantages and the high quality of Lingg & Janke products are still preserved. For example
the switching actuators are still ideally suited for switching capacitive loads with high switching currents (C-load) and the relays of the blind / shutter actuators are plunged so they can be exchanged separately in case of malfunction

17427
AH3F16H-E ECO+, SWITCHING ACTUATOR, 3 CHANELS, 16A, 3U, MANUAL OPERATION ACTUATORS - OUTPUTS
17428 AH9F16H-E ECO+, Switching actuator, 9 chanels, 16A, 6U, manual operation ACTUATORS - OUTPUTS
Switching actuator, 9 chanels, 16A, 6U, manual operation
17428
AH9F16H-E ECO+, SWITCHING ACTUATOR, 9 CHANELS, 16A, 6U, MANUAL OPERATION ACTUATORS - OUTPUTS
17429 J2F6H-E ECO+, shutter actuator 2-fold, 6A, 3U, manual operation ACTUATORS - OUTPUTS
ECO+, shutter actuator 2-fold, 6A, 3U, manual operation
17429
J2F6H-E ECO+, SHUTTER ACTUATOR 2-FOLD, 6A, 3U, MANUAL OPERATION ACTUATORS - OUTPUTS
17430 J4F6H-E ECO+, shutter actuator 4-fold, 6A, 4U, manual operation ACTUATORS - OUTPUTS
ECO+, shutter actuator 4-fold, 6A, 4U, manual operation
17430
J4F6H-E ECO+, SHUTTER ACTUATOR 4-FOLD, 6A, 4U, MANUAL OPERATION ACTUATORS - OUTPUTS
17431 J6F6H-E ECO+, shutter actuator 6-fold, 6A, 6U, manual operation ACTUATORS - OUTPUTS
ECO+, shutter actuator 6-fold, 6A, 6U, manual operation
17431
J6F6H-E ECO+, SHUTTER ACTUATOR 6-FOLD, 6A, 6U, MANUAL OPERATION ACTUATORS - OUTPUTS
17432 J2x6F6H-E ECO+, shutter actuator 12-fold, 6A, 12U, manual operation ACTUATORS - OUTPUTS
ECO+, shutter actuator 12-fold, 6A, 12U, manual operation
17432
J2X6F6H-E ECO+, SHUTTER ACTUATOR 12-FOLD, 6A, 12U, MANUAL OPERATION ACTUATORS - OUTPUTS
17433 BEA4FK16H-E ECO+ Actuator 4 chanels 16A C-Load, manual operation + 4 Binary input, 6U ACTUATORS - OUTPUTS
ECO+ Actuator 4 chanels 16A C-Load, manual operation + 4 Binary input, 6U

 

17433
BEA4FK16H-E ECO+ ACTUATOR 4 CHANELS 16A C-LOAD, MANUAL OPERATION + 4 BINARY INPUT, 6U ACTUATORS - OUTPUTS
17436 BEA4F230H-E ECO+ Actuator 4 chanels 16A C-Load, manual operation + 4 Binary input 230VAC 6U ACTUATORS - OUTPUTS
ECO+ Actuator 4 chanels 16A C-Load, manual operation + 4 Binary input 230VAC, 6U

 

17436
BEA4F230H-E ECO+ ACTUATOR 4 CHANELS 16A C-LOAD, MANUAL OPERATION + 4 BINARY INPUT 230VAC 6U ACTUATORS - OUTPUTS
17437 BEA8FK16H-E ECO+ Actuator 8 chanels 16A C-Load, manual operation + 8 Binary input, 9U ACTUATORS - OUTPUTS
ECO+ Actuator 8 chanels 16A C-Load, manual operation + 8 Binary input, 9U

 

17437
BEA8FK16H-E ECO+ ACTUATOR 8 CHANELS 16A C-LOAD, MANUAL OPERATION + 8 BINARY INPUT, 9U ACTUATORS - OUTPUTS
17438 BEA8F230H-E ECO+ Actuator 8 chanels 16A C-Load, manual operation + 8 Binary input 230VAC 9U ACTUATORS - OUTPUTS
ECO+ Actuator 8 chanels 16A C-Load, manual operation + 8 Binary input 230VAC, 9U

 

17438
BEA8F230H-E ECO+ ACTUATOR 8 CHANELS 16A C-LOAD, MANUAL OPERATION + 8 BINARY INPUT 230VAC 9U ACTUATORS - OUTPUTS
17636 TS4FL-2-E ECO +, Push button interface for 4 single buttons + 4 outputs INPUTS

Universal push button interface

• with separate wire connectors
• rocker function or single buttons points are programmable
• available in 3 variations:
• 4 single buttons with or without LEDs or 8 single buttons

17636
TS4FL-2-E ECO +, PUSH BUTTON INTERFACE FOR 4 SINGLE BUTTONS + 4 OUTPUTS INPUTS
4368 89210 eibDUO power supply actuator 640ma 6fold 16A hand ACTUATORS - OUTPUTS
actuator 6-fold 16A with PSU 640 mA The eibDUO Series switching actuator and power supply contains a 6-channel actuator and a 640 mA EIB voltage supply in one housing. The actuator part is particularly suitably to high and capacitive loads with high switching on current (C-load). Contact rating per contact amounts to 16A with 250V AC, each channel its own phase can be assigned. Each contact is on one screwless double clamp. Thus standard grinding through of the phase and a duplicate of the output terminal are problem-free. Each channel also has a manual control, which serves also as mechanical on/off indicator.
4368
89210 EIBDUO POWER SUPPLY ACTUATOR 640MA 6FOLD 16A HAND ACTUATORS - OUTPUTS
4377 89200 eibDUO switching actuator 2x6f 16A ACTUATORS - OUTPUTS

switching actuators (binary outputs)

This 12-gang switching actuator of the eibDUO series combines two 6-gang actuators in a single housing and is ideally suited for switching high loads, also capacitive ones with high switching currents (C-load).

Switching power per channel is 16A at 250 V AC. Each channel may be linked to its own mains phase. Each contact has a screwless twin terminal block. In this way, the phase may be effortlessly daisy-chained through and two circuits may beconnected, all in a way compliant with electrical regulations. The praxis oriented realisation is rounded off with the per-channel manual control, which also serves to indicate the switching status. The flexible application software allows each contact to be fully parameterised individually. Per group of 6 switching contacts, up to 40 different group addresses may be assigned

4377
89200 EIBDUO SWITCHING ACTUATOR 2X6F 16A ACTUATORS - OUTPUTS
4378 89201 eibSOLO switching actuator 6f 16A ACTUATORS - OUTPUTS

eibDUO / eibSOLO series

This 6-gang switching actuator of the eibSOLO series is ideally suited for switching high loads, also capacitive ones with high switching
currents (C-load). Switching power per channel is 16A at 250 V AC. Each channel may be linked to its own mains phase. Each contact has a screwless twin terminal block. In this way, the phase may be effortlessly daisy-chained through and two circuits may beconnected, all in a way compliant with electrical regulations.
The praxis oriented realisation is rounded off with the per-channel manual control, which also serves to indicate the switching status. The flexible application software allows each contact to be fully parameterised individually. For the 6 switching contacts, up to 40 different group addresses may be assigned.

4378
89201 EIBSOLO SWITCHING ACTUATOR 6F 16A ACTUATORS - OUTPUTS
4380 89211 eibDUO power supply actuator 320mA 6fold 16A hand ACTUATORS - OUTPUTS
actuator 6-fold 16A with PSU 320 mA The eibDUO Series switching actuator and power supply contains a 6-channel actuator and a 320mA EIB voltage supply in one housing. The actuator part is particularly suitably to high and capacitive loads with high switching on current (C-load). Contact rating per contact amounts to 16A with 250V AC, each channel its own phase can be assigned. Each contact is on one screwless double clamp. Thus standard grinding through of the phase and a duplicate of the output terminal are problem-free. Each channel also has a manual control, which serves also as mechanical on/off indicator.
4380
89211 EIBDUO POWER SUPPLY ACTUATOR 320MA 6FOLD 16A HAND ACTUATORS - OUTPUTS
4382 89221 eibDUO Multipurpose Switching Actuator 6-fold 16A + 640mA Power Supply + USB Interface ACTUATORS - OUTPUTS
NTA6F16H + USB actuator 6-fold 16A with PSU + USB The eibDUO Series switching actuator and power supply contains a 6-channel actuator and a 640 mA EIB voltage supply, as well as RS 232 or USB interface in one housing. The actuator part is particularly suitably to high and capacitive loads with high switching on current (C-load). Contact rating per contact amounts to 16A with 250V AC, each channel its own phase can be assigned. Each contact is on one screwless double clamp. Thus standard grinding through of the phase and a duplicate of the output terminal are problem-free. Each channel also has a manual control, which serves also as mechanical on/off indicator.
4382
89221 EIBDUO MULTIPURPOSE SWITCHING ACTUATOR 6-FOLD 16A + 640MA POWER SUPPLY + USB INTERFACE ACTUATORS - OUTPUTS
8188 87310 network coupler FacilityWeb GATEWAYS
The NK gateways connect the EIB/KNX bus with an IP network. They have a HTTP and FTP server on board and come equipped with a 104 datapoint visualisation. This built-in visualisation can be viewed directly with a standard web browser without any additional configuration. Any required settings are performed via ETS (group addresses / datapoint types / IP addresses), or within the visualisation itself using a browser (button labels/page headings/page links). Optionally, thanks to the integrated web server, the visualisation can be easily extended and its functionality enhanced. In this way the NK permits you to create a network enabled visualisation simply with ETS and a web browser, so without the need for any additional software tools. Via an external coupling of the (LAN) network to Internet through a router, the NK can now also be controlled per remote Internet access. All functions are protected from unauthorised access with a password. It is possible, for example, to store the latest version of the ETS project data file on the NK1, making it available on site in the installation. ETS3 can also be connected with the EIB /KNX installation via NK (using the EIBlib/IP protocol), for commissioning (download) and parameter settings. Given the proper Internet connectivity, you can thus perform remote maintenance and programming of the bus installation. For special software or visualisation needs, the NKs come with a dedicated command interface, allowing the 104 datapoints of the integrated visualisation to be controlled externally. A mini visualisation derived from the integrated visualisation is also given to have access via your mobile phone (Internet access required).
8188
87310 NETWORK COUPLER FACILITYWEB GATEWAYS
10219 85041 KNX FacilityWeb cold / warm water meters (Qn= 2,5m³/h, 190mm, DN20, G1”, 90°C) SMART METERING
electronic water meters, type Corona E Manufacturer: Hydrometer · multi-jet dry runner electronic water meter · electronic display for meter readout · including KNX-interface in separate, wall mounted box · full FacilityWeb functionality in connection with NK-FW-xx · HTTP-protocol, dedicated homepage · integrated data logging for 1-year Nominal flow: Qn= 2,5m³/h Length : 190mm Connection thread: DN20 , G1 max.temp.: 90°C Direction: horizontal prices including calibration fee other dimensions on request
10219
85041 KNX FACILITYWEB COLD / WARM WATER METERS (QN= 2,5M³/H, 190MM, DN20, G1”, 90°C) SMART METERING
11749 87601 Universal dimming actuator 4 x 2.5 A / 570W, with current measurement functions and improved for dimming LED loads ACTUATORS - OUTPUTS

This dimming actuator 4-fold is designed for all common dimmable loads. The 4 dimmable outputs are able to be loaded up to 2.5 A each. The control circuit of each channel is able to detect the type of the connected load and switch automatically between leading or trailing edge.

To heighten loads even two of the outputs can be put together in parallel arrangement. In addition to the automatically load detection each channel could be pre-configured with DIP switches.

 Application parameters:

  • Switching on/off
  • Dimming lower/higher
  • Dimming value
  • Switching with dimming
  • High and low dimming thresholds
  • Soft ON / OFF
  • Adjustable dimming time for higher/lower, values, scenes, sequences
  • Time function for ON/OFF, staircase, blinking
  • 2 sequences for each channel with up to 4 actions
  • Up to 32 scenes for each channel
  • Blocking
  • State of switching, value and up to 3 possible error values
  • Counting values (serial numnber, state, counter reading)
  • Metering values (voltage, current, active power)
  • FacilityWeb features
11749
87601 UNIVERSAL DIMMING ACTUATOR 4 X 2.5 A / 570W, WITH CURRENT MEASUREMENT FUNCTIONS AND IMPROVED FOR DIMMING LED LOADS ACTUATORS - OUTPUTS
17146 84914 Heat meters, Qn= 25 m³/h, DN65, 300mm, 15-130ºC, SMART METERING

The Kamstrup MULTICAL® 602 is an all-purpose energy calculator for heat and cooling together with almost any kind of pulsed flow sensors and with 2 or 4 wired temperature sensor pairs.

The Lingg & Janke KNX module is mounted in the connecting base of the meter.-

Parameter Settings

The available parameters allow you to define the following outputs:

Meter value (MWh)
High-resolution meter value (kWh)
Meter value (m³)
High-resolution meter value (l)
Meter status
Serial number and meter number
Relative up counter Meter value / Reset
Relative down counter Meter value / Reset / Zero
Output 15min / 60min difference (m³)
Due date billing Date / Set
Output power output, flow rate and temperatures T1, T2, deltaT
Limit monitoring power output, flow rate and temperatures T1, T2, deltaT, 2 thresholds each

17146
84914 HEAT METERS, QN= 25 M³/H, DN65, 300MM, 15-130ºC, SMART METERING
8583 87321 network coupler FacilityWeb - nk-fw graphic GATEWAYS
AFacilityWeb
system device
common features
- programming of KNX installation via LAN, ETS3 only
- built in visualisation 26 pages / up to 4 data points per page
NK-FW-clock
- buffering of date & time
NK-FW-graphic
- buffering of date & time
- software for diagrams to a maximum of 10 energy meters
8583
87321 NETWORK COUPLER FACILITYWEB - NK-FW GRAPHIC GATEWAYS
9841 87800 IP SWITCHES, MAIN MODUL - FACILITY WEB KNX IP-SWITCHES PUSH BUTTONS
4-button main modul with integrated BCU for the connection of up to 3 extension modules

Wich facility web functionality (using a NK-FW via Web Browser)


KNX IP-Switch

KNX IP switches by Lingg & Janke comprise a main module with KNX bus coupling unit. Up to three extension modules, connected by prefabricated cables, open out the functional range of the KNX IP switch main module. As many as 16 switching functions can thus be implemented without great expense, using just one bus coupling unit.

Both, main and extension modules, can accommodate single or double rocker switches. The rockers are designed as pushbuttons with neutral position so that they can provide different switching functions, such as ON/OFF, dimmer, or louvre blinds control.

Easy Parameter Definition

In the ETS application software, you always go through the same steps when setting the module parameters, be it the main module or the extension module. For every module you decide whether the switch function is to be implemented by a rocker switch action or a single-key pushbutton action. The switch action itself can be an ON/OFF or dimmer operation, louvre blinds or scenario control, or a value setting function.

Our Range of Switches

The switching rockers are available in the color arctic-white and with laser-engraved labeling. All IP switching modules are offered with single or double rocker unit. KNX IP switches are compatible with the Kopp Design HK05 switch range and can thus be freely combined with these devices.


9841
87800 IP SWITCHES, MAIN MODUL - FACILITY WEB KNX IP-SWITCHES PUSH BUTTONS
9842 87801 IP SWITCHES, EXTENSION MODUL (CONNECTING CABLE 20 CM) - FACILITY WEB KNX IP-SWITCHES PUSH BUTTONS
4-button extension modul without integrated BCU

Same functionality as the Main modul

It includes 20 cm connecting cable for 2-gang switch box


KNX IP-Switch

KNX IP switches by Lingg & Janke comprise a main module with KNX bus coupling unit. Up to three extension modules, connected by prefabricated cables, open out the functional range of the KNX IP switch main module. As many as 16 switching functions can thus be implemented without great expense, using just one bus coupling unit.

Both, main and extension modules, can accommodate single or double rocker switches. The rockers are designed as pushbuttons with neutral position so that they can provide different switching functions, such as ON/OFF, dimmer, or louvre blinds control.

Easy Parameter Definition

In the ETS application software, you always go through the same steps when setting the module parameters, be it the main module or the extension module. For every module you decide whether the switch function is to be implemented by a rocker switch action or a single-key pushbutton action. The switch action itself can be an ON/OFF or dimmer operation, louvre blinds or scenario control, or a value setting function.

Our Range of Switches

The switching rockers are available in the color arctic-white and with laser-engraved labeling. All IP switching modules are offered with single or double rocker unit. KNX IP switches are compatible with the Kopp Design HK05 switch range and can thus be freely combined with these devices.


9842
87801 IP SWITCHES, EXTENSION MODUL (CONNECTING CABLE 20 CM) - FACILITY WEB KNX IP-SWITCHES PUSH BUTTONS
9843 87802 IP SWITCHES, EXTENSION MODUL (CONNECTING CABLE 27 CM) - FACILITY WEB KNX IP-SWITCHES PUSH BUTTONS
4-button extension modul without integrated BCU

Same functionality as the Main modul

It includes 27 cm connecting cable for 3-gang switch box


KNX IP-Switch

KNX IP switches by Lingg & Janke comprise a main module with KNX bus coupling unit. Up to three extension modules, connected by prefabricated cables, open out the functional range of the KNX IP switch main module. As many as 16 switching functions can thus be implemented without great expense, using just one bus coupling unit.

Both, main and extension modules, can accommodate single or double rocker switches. The rockers are designed as pushbuttons with neutral position so that they can provide different switching functions, such as ON/OFF, dimmer, or louvre blinds control.

Easy Parameter Definition

In the ETS application software, you always go through the same steps when setting the module parameters, be it the main module or the extension module. For every module you decide whether the switch function is to be implemented by a rocker switch action or a single-key pushbutton action. The switch action itself can be an ON/OFF or dimmer operation, louvre blinds or scenario control, or a value setting function.

Our Range of Switches

The switching rockers are available in the color arctic-white and with laser-engraved labeling. All IP switching modules are offered with single or double rocker unit. KNX IP switches are compatible with the Kopp Design HK05 switch range and can thus be freely combined with these devices.


9843
87802 IP SWITCHES, EXTENSION MODUL (CONNECTING CABLE 27 CM) - FACILITY WEB KNX IP-SWITCHES PUSH BUTTONS
9844 87803 IP SWITCHES, EXTENSION MODUL (CONNECTING CABLE 35 CM) - FACILITY WEB KNX IP-SWITCHES PUSH BUTTONS
4-button extension modul without integrated BCU

Same functionality as the Main modul

It includes 35 cm connecting cable for 4-gang switch box


KNX IP-Switch

KNX IP switches by Lingg & Janke comprise a main module with KNX bus coupling unit. Up to three extension modules, connected by prefabricated cables, open out the functional range of the KNX IP switch main module. As many as 16 switching functions can thus be implemented without great expense, using just one bus coupling unit.

Both, main and extension modules, can accommodate single or double rocker switches. The rockers are designed as pushbuttons with neutral position so that they can provide different switching functions, such as ON/OFF, dimmer, or louvre blinds control.

Easy Parameter Definition

In the ETS application software, you always go through the same steps when setting the module parameters, be it the main module or the extension module. For every module you decide whether the switch function is to be implemented by a rocker switch action or a single-key pushbutton action. The switch action itself can be an ON/OFF or dimmer operation, louvre blinds or scenario control, or a value setting function.

Our Range of Switches

The switching rockers are available in the color arctic-white and with laser-engraved labeling. All IP switching modules are offered with single or double rocker unit. KNX IP switches are compatible with the Kopp Design HK05 switch range and can thus be freely combined with these devices.


9844
87803 IP SWITCHES, EXTENSION MODUL (CONNECTING CABLE 35 CM) - FACILITY WEB KNX IP-SWITCHES PUSH BUTTONS
9845 87804 IP SWITCHES, EXTENSION MODUL (CONNECTING CABLE 50 CM) - FACILITY WEB KNX IP-SWITCHES PUSH BUTTONS
4-button extension modul without integrated BCU

Same functionality as the Main modul

It includes 50 cm connecting cable for opposite wall mounting


KNX IP-Switch

KNX IP switches by Lingg & Janke comprise a main module with KNX bus coupling unit. Up to three extension modules, connected by prefabricated cables, open out the functional range of the KNX IP switch main module. As many as 16 switching functions can thus be implemented without great expense, using just one bus coupling unit.

Both, main and extension modules, can accommodate single or double rocker switches. The rockers are designed as pushbuttons with neutral position so that they can provide different switching functions, such as ON/OFF, dimmer, or louvre blinds control.

Easy Parameter Definition

In the ETS application software, you always go through the same steps when setting the module parameters, be it the main module or the extension module. For every module you decide whether the switch function is to be implemented by a rocker switch action or a single-key pushbutton action. The switch action itself can be an ON/OFF or dimmer operation, louvre blinds or scenario control, or a value setting function.

Our Range of Switches

The switching rockers are available in the color arctic-white and with laser-engraved labeling. All IP switching modules are offered with single or double rocker unit. KNX IP switches are compatible with the Kopp Design HK05 switch range and can thus be freely combined with these devices.


9845
87804 IP SWITCHES, EXTENSION MODUL (CONNECTING CABLE 50 CM) - FACILITY WEB KNX IP-SWITCHES PUSH BUTTONS
10877 87331 NT80NK-FW-graphic mit integrierter KNX-Spannungsversorgung, Uhr und graphischem Energy Analyzer GATEWAYS

AFacilityWeb  system device  common features
- programming of KNX installation via LAN, ETS3 only
- built in visualisation 26 pages / up to 4 data points per page
NK-FW-clock
- buffering of date & time
NK-FW-graphic
- buffering of date & time
- software for diagrams to a maximum of 10 energy meters.

- Energy Analyzer.

10877
87331 NT80NK-FW-GRAPHIC MIT INTEGRIERTER KNX-SPANNUNGSVERSORGUNG, UHR UND GRAPHISCHEM ENERGY ANALYZER GATEWAYS
10199 85811 KNX GAS METER (Type: Gx-RF1) SMART METERING

Itron Gas meter

The Itron gas meter uses its own Itron interface for reading out the meter reading and serial number. The Lingg&Janke KNX module is installed in an external surfacemounting enclosure.

Parameter Setting

The available parameters allow you to define the following outputs:

  • Meter value (m³)
  • High-resolution meter value (10 l)
  • Meter status 
  • Serial number and meter number 
  • Relative up counter Meter value / Reset
  • Relative down counter Meter value / Reset / Zero
  • Output 15min / 60min difference (m³)
  • Due date billing Date / Set

Storage of Consumption Data

The integrated KNX data logger stores the data at 15 minute intervals over a period of one year. The data can be read out directly via the NK-FW network coupler using a standard Internet browser. By using FTP, you can also download the stored data from the KNX/EIB module for further processing, for example with MS Excel or Flash / Silverlight. The application program offers 15 data points for further processing in the KNX/EIB bus. The individual data can be transmitted cyclically to the KNX bus.

 

Itron KNX Gas Meter

more information

Product information

icon  PI-Gas Meters_05-2012.pdf

KNX product database for gas meter

icon  GZC-FW-EN-DE.pr3


10199
85811 KNX GAS METER (TYPE: GX-RF1) SMART METERING
12390 87763 Active power energy meter, single-phase, 32A, FacilityWeb SMART METERING

The KNX elektricity meter from Finder are direct connection single-phase and three-phase meters for 35 mm rail (EN 60715) mount. The meter are full electronic without movable parts. Thus, shock and impact during transport and mounting do not affect energy registration. 

Display indicates:

  • total consumption
  • partial consumption (this value is resettable)
  • voltage
  • current

Storage of Consumption Data

The  Lingg & Janke KNX module stores the measured data every 15 minutes over a period of one year and provides full FacilityWeb capability. Every meter has its own home page. The meter readings can be read out directly via a network coupler using a standard Internet browser, or transmitted for further processing and billing purposes using FTP. Consistent communication based on the TCP/IP and KNX protocol is the key to fast and costeffective acquisition of operating and energy consumption data.

12390
87763 ACTIVE POWER ENERGY METER, SINGLE-PHASE, 32A, FACILITYWEB SMART METERING
12402 84001 Heat Meter, QN=0.6, DN15, 110mm, G3/4 SMART METERING

The SHARKY Heat Meter can be used for measuring the energy consumption in heating / cooling application for billing purposes. The measurement principle is static and based on the measurement of the transit time. Ultrasonic technology offers many benefits : no moving parts (avoids wear and tear of the metering components), low pressure loss, large metering dynamics and low start flow rate, insensitiveness to suspended particles.

12402
84001 HEAT METER, QN=0.6, DN15, 110MM, G3/4 SMART METERING
12403 84002 Heat Meter, QN=1.5, DN15, 110mm, G3/4 SMART METERING

The SHARKY Heat Meter can be used for measuring the energy consumption in heating / cooling application for billing purposes. The measurement principle is static and based on the measurement of the transit time. Ultrasonic technology offers many benefits : no moving parts (avoids wear and tear of the metering components), low pressure loss, large metering dynamics and low start flow rate, insensitiveness to suspended particles.

12403
84002 HEAT METER, QN=1.5, DN15, 110MM, G3/4 SMART METERING
12405 85921 KNX FacilityWeb calorimeters, Qn= 0.6m³/h, DN15,110mm, G3/4, 15-130°C SMART METERING

Parameter Settings

The available parameters allow you to define the following outputs: 

  • Meter value (MWh)
  • High-resolution meter value (kWh)
  • Meter value (m³) 
  • High-resolution meter value (l)
  • Meter status
  • Serial number and meter number 
  • Relative up counter Meter value / Reset
  • Relative down counter Meter value / Reset / Zero
  • Output 15min / 60min difference (m³)
  • Due date billing Date / Set
  • Output power output, flow rate and temperatures T1, T2, deltaT 
  • Limit monitoring power output, flow rate and temperatures T1, T2, deltaT, 2 thresholds each
12405
85921 KNX FACILITYWEB CALORIMETERS, QN= 0.6M³/H, DN15,110MM, G3/4, 15-130°C SMART METERING
12406 85922 KNX FacilityWeb calorimeters, Qn= 1,5m³/h, DN15,110mm, G3/4, 15-130°C SMART METERING

Parameter Settings

The available parameters allow you to define the following outputs: 

  • Meter value (MWh)
  • High-resolution meter value (kWh)
  • Meter value (m³) 
  • High-resolution meter value (l)
  • Meter status
  • Serial number and meter number 
  • Relative up counter Meter value / Reset
  • Relative down counter Meter value / Reset / Zero
  • Output 15min / 60min difference (m³)
  • Due date billing Date / Set
  • Output power output, flow rate and temperatures T1, T2, deltaT 
  • Limit monitoring power output, flow rate and temperatures T1, T2, deltaT, 2 thresholds each
12406
85922 KNX FACILITYWEB CALORIMETERS, QN= 1,5M³/H, DN15,110MM, G3/4, 15-130°C SMART METERING
12407 85923 KNX FacilityWeb calorimeters, Qn= 1,5m³/h, DN15,165mm, G3/4, 15-130°C SMART METERING

Parameter Settings

The available parameters allow you to define the following outputs: 

  • Meter value (MWh)
  • High-resolution meter value (kWh)
  • Meter value (m³) 
  • High-resolution meter value (l)
  • Meter status
  • Serial number and meter number 
  • Relative up counter Meter value / Reset
  • Relative down counter Meter value / Reset / Zero
  • Output 15min / 60min difference (m³)
  • Due date billing Date / Set
  • Output power output, flow rate and temperatures T1, T2, deltaT 
  • Limit monitoring power output, flow rate and temperatures T1, T2, deltaT, 2 thresholds each
12407
85923 KNX FACILITYWEB CALORIMETERS, QN= 1,5M³/H, DN15,165MM, G3/4, 15-130°C SMART METERING
12408 85924 KNX FacilityWeb calorimeters, Qn= 0,6m³/h, DN20,130mm, G1, 15-130°C SMART METERING

Parameter Settings

The available parameters allow you to define the following outputs: 

  • Meter value (MWh)
  • High-resolution meter value (kWh)
  • Meter value (m³) 
  • High-resolution meter value (l)
  • Meter status
  • Serial number and meter number 
  • Relative up counter Meter value / Reset
  • Relative down counter Meter value / Reset / Zero
  • Output 15min / 60min difference (m³)
  • Due date billing Date / Set
  • Output power output, flow rate and temperatures T1, T2, deltaT 
  • Limit monitoring power output, flow rate and temperatures T1, T2, deltaT, 2 thresholds each
12408
85924 KNX FACILITYWEB CALORIMETERS, QN= 0,6M³/H, DN20,130MM, G1, 15-130°C SMART METERING
12409 85925 KNX FacilityWeb calorimeters, Qn= 1,5m³/h, DN20,130mm, G1, 15-130°C SMART METERING

Parameter Settings

The available parameters allow you to define the following outputs: 

  • Meter value (MWh)
  • High-resolution meter value (kWh)
  • Meter value (m³) 
  • High-resolution meter value (l)
  • Meter status
  • Serial number and meter number 
  • Relative up counter Meter value / Reset
  • Relative down counter Meter value / Reset / Zero
  • Output 15min / 60min difference (m³)
  • Due date billing Date / Set
  • Output power output, flow rate and temperatures T1, T2, deltaT 
  • Limit monitoring power output, flow rate and temperatures T1, T2, deltaT, 2 thresholds each
12409
85925 KNX FACILITYWEB CALORIMETERS, QN= 1,5M³/H, DN20,130MM, G1, 15-130°C SMART METERING
12410 85926 KNX FacilityWeb calorimeters, Qn= 1,5m³/h, DN20, 165mm, G1, 15-130°C SMART METERING

Parameter Settings

The available parameters allow you to define the following outputs: 

  • Meter value (MWh)
  • High-resolution meter value (kWh)
  • Meter value (m³) 
  • High-resolution meter value (l)
  • Meter status
  • Serial number and meter number 
  • Relative up counter Meter value / Reset
  • Relative down counter Meter value / Reset / Zero
  • Output 15min / 60min difference (m³)
  • Due date billing Date / Set
  • Output power output, flow rate and temperatures T1, T2, deltaT 
  • Limit monitoring power output, flow rate and temperatures T1, T2, deltaT, 2 thresholds each
12410
85926 KNX FACILITYWEB CALORIMETERS, QN= 1,5M³/H, DN20, 165MM, G1, 15-130°C SMART METERING
12411 85927 KNX FacilityWeb calorimeters, Qn= 0,6m³/h, DN20,190mm, G1, 15-130°C SMART METERING

Parameter Settings

The available parameters allow you to define the following outputs: 

  • Meter value (MWh)
  • High-resolution meter value (kWh)
  • Meter value (m³) 
  • High-resolution meter value (l)
  • Meter status
  • Serial number and meter number 
  • Relative up counter Meter value / Reset
  • Relative down counter Meter value / Reset / Zero
  • Output 15min / 60min difference (m³)
  • Due date billing Date / Set
  • Output power output, flow rate and temperatures T1, T2, deltaT 
  • Limit monitoring power output, flow rate and temperatures T1, T2, deltaT, 2 thresholds each
12411
85927 KNX FACILITYWEB CALORIMETERS, QN= 0,6M³/H, DN20,190MM, G1, 15-130°C SMART METERING
12412 85928 KNX FacilityWeb calorimeters, Qn= 1.5m³/h, DN20,190mm, G1, 15-130°C SMART METERING

Parameter Settings

The available parameters allow you to define the following outputs: 

  • Meter value (MWh)
  • High-resolution meter value (kWh)
  • Meter value (m³) 
  • High-resolution meter value (l)
  • Meter status
  • Serial number and meter number 
  • Relative up counter Meter value / Reset
  • Relative down counter Meter value / Reset / Zero
  • Output 15min / 60min difference (m³)
  • Due date billing Date / Set
  • Output power output, flow rate and temperatures T1, T2, deltaT 
  • Limit monitoring power output, flow rate and temperatures T1, T2, deltaT, 2 thresholds each
12412
85928 KNX FACILITYWEB CALORIMETERS, QN= 1.5M³/H, DN20,190MM, G1, 15-130°C SMART METERING
12413 85929 KNX FacilityWeb calorimeters, Qn= 2.5m³/h, DN20,190mm, G1, 15-130°C SMART METERING

Parameter Settings

The available parameters allow you to define the following outputs: 

  • Meter value (MWh)
  • High-resolution meter value (kWh)
  • Meter value (m³) 
  • High-resolution meter value (l)
  • Meter status
  • Serial number and meter number 
  • Relative up counter Meter value / Reset
  • Relative down counter Meter value / Reset / Zero
  • Output 15min / 60min difference (m³)
  • Due date billing Date / Set
  • Output power output, flow rate and temperatures T1, T2, deltaT 
  • Limit monitoring power output, flow rate and temperatures T1, T2, deltaT, 2 thresholds each
12413
85929 KNX FACILITYWEB CALORIMETERS, QN= 2.5M³/H, DN20,190MM, G1, 15-130°C SMART METERING
12414 85930 KNX FacilityWeb calorimeters, Qn= 3.5m³/h, DN25, 260mm, G5/4, 15-130°C SMART METERING

Parameter Settings

The available parameters allow you to define the following outputs: 

  • Meter value (MWh)
  • High-resolution meter value (kWh)
  • Meter value (m³) 
  • High-resolution meter value (l)
  • Meter status
  • Serial number and meter number 
  • Relative up counter Meter value / Reset
  • Relative down counter Meter value / Reset / Zero
  • Output 15min / 60min difference (m³)
  • Due date billing Date / Set
  • Output power output, flow rate and temperatures T1, T2, deltaT 
  • Limit monitoring power output, flow rate and temperatures T1, T2, deltaT, 2 thresholds each
12414
85930 KNX FACILITYWEB CALORIMETERS, QN= 3.5M³/H, DN25, 260MM, G5/4, 15-130°C SMART METERING
12417 85931 KNX FacilityWeb calorimeters, Qn= 6.0m³/h, DN25, 260mm, G5/4, 15-130°C SMART METERING

Parameter Settings

The available parameters allow you to define the following outputs: 

  • Meter value (MWh)
  • High-resolution meter value (kWh)
  • Meter value (m³) 
  • High-resolution meter value (l)
  • Meter status
  • Serial number and meter number 
  • Relative up counter Meter value / Reset
  • Relative down counter Meter value / Reset / Zero
  • Output 15min / 60min difference (m³)
  • Due date billing Date / Set
  • Output power output, flow rate and temperatures T1, T2, deltaT 
  • Limit monitoring power output, flow rate and temperatures T1, T2, deltaT, 2 thresholds each
12417
85931 KNX FACILITYWEB CALORIMETERS, QN= 6.0M³/H, DN25, 260MM, G5/4, 15-130°C SMART METERING
12427 85932 KNX FacilityWeb calorimeters, Qn= 10m³/h, DN40, 260mm, G2, 15-130°C SMART METERING

The Kamstrup MULTICAL® 602 is an all-purpose energy calculator for heat and cooling together with almost any kind of pulsed flow sensors and with 2 or 4 wired temperature sensor pairs. 

The Lingg & Janke KNX module is mounted in the connecting base of the meter.-

Parameter Settings

The available parameters allow you to define the following outputs: 

  • Meter value (MWh)
  • High-resolution meter value (kWh)
  • Meter value (m³) 
  • High-resolution meter value (l)
  • Meter status
  • Serial number and meter number 
  • Relative up counter Meter value / Reset
  • Relative down counter Meter value / Reset / Zero
  • Output 15min / 60min difference (m³)
  • Due date billing Date / Set
  • Output power output, flow rate and temperatures T1, T2, deltaT 
  • Limit monitoring power output, flow rate and temperatures T1, T2, deltaT, 2 thresholds each
12427
85932 KNX FACILITYWEB CALORIMETERS, QN= 10M³/H, DN40, 260MM, G2, 15-130°C SMART METERING
12578 85941 Hydrometer Kamstrup Multical 62, QN1,6/DN15/Baulänge110mm/G3/4 B SMART METERING

 

MULTICAL 62 is an ultrasonic flow sensor, which is used for measurement of cold water consumption (0.1...50°C) and hot water consumption (0.1...90°C) in trade, industry and housing. 
The ultrasonic sensor does not include any mechanical parts, which means that it is not subject to wear

Meter MID approved

Storage of Consumption Data

The integrated KNX data logger stores the data at 15 minute intervals over a period of one year. The data can be read out directly via the NK-FW network coupler using a standard Internet browser. By using FTP, you can also download the stored data from the KNX/EIB module for further processing, for example with MS Excel or Flash / Silverlight. The application program offers 21 data points for further processing in the KNX/EIB bus. The individual data can be transmitted cyclically to the KNX bus.

12578
85941 HYDROMETER KAMSTRUP MULTICAL 62, QN1,6/DN15/BAULÄNGE110MM/G3/4 B SMART METERING
12579 85942 Hydrometer Kamstrup Multical 62, QN1,6/DN20/Baulänge110mm/G1 B SMART METERING

 

MULTICAL 62 is an ultrasonic flow sensor, which is used for measurement of cold water consumption (0.1...50°C) and hot water consumption (0.1...90°C) in trade, industry and housing. 
The ultrasonic sensor does not include any mechanical parts, which means that it is not subject to wear

Meter MID approved

Storage of Consumption Data

The integrated KNX data logger stores the data at 15 minute intervals over a period of one year. The data can be read out directly via the NK-FW network coupler using a standard Internet browser. By using FTP, you can also download the stored data from the KNX/EIB module for further processing, for example with MS Excel or Flash / Silverlight. The application program offers 21 data points for further processing in the KNX/EIB bus. The individual data can be transmitted cyclically to the KNX bus.

12579
85942 HYDROMETER KAMSTRUP MULTICAL 62, QN1,6/DN20/BAULÄNGE110MM/G1 B SMART METERING
12580 85943 Hydrometer Kamstrup Multical 62, QN1,6/DN20/Baulänge190mm/G1 B SMART METERING

 

MULTICAL 62 is an ultrasonic flow sensor, which is used for measurement of cold water consumption (0.1...50°C) and hot water consumption (0.1...90°C) in trade, industry and housing. 
The ultrasonic sensor does not include any mechanical parts, which means that it is not subject to wear

Meter MID approved

Storage of Consumption Data

The integrated KNX data logger stores the data at 15 minute intervals over a period of one year. The data can be read out directly via the NK-FW network coupler using a standard Internet browser. By using FTP, you can also download the stored data from the KNX/EIB module for further processing, for example with MS Excel or Flash / Silverlight. The application program offers 21 data points for further processing in the KNX/EIB bus. The individual data can be transmitted cyclically to the KNX bus.

12580
85943 HYDROMETER KAMSTRUP MULTICAL 62, QN1,6/DN20/BAULÄNGE190MM/G1 B SMART METERING
12581 85944 Hydrometer Kamstrup Multical 62, QN2.5/DN20/Baulänge190mm/G1 B SMART METERING

 

MULTICAL 62 is an ultrasonic flow sensor, which is used for measurement of cold water consumption (0.1...50°C) and hot water consumption (0.1...90°C) in trade, industry and housing. 
The ultrasonic sensor does not include any mechanical parts, which means that it is not subject to wear

Meter MID approved

Storage of Consumption Data

The integrated KNX data logger stores the data at 15 minute intervals over a period of one year. The data can be read out directly via the NK-FW network coupler using a standard Internet browser. By using FTP, you can also download the stored data from the KNX/EIB module for further processing, for example with MS Excel or Flash / Silverlight. The application program offers 21 data points for further processing in the KNX/EIB bus. The individual data can be transmitted cyclically to the KNX bus.

12581
85944 HYDROMETER KAMSTRUP MULTICAL 62, QN2.5/DN20/BAULÄNGE190MM/G1 B SMART METERING
12582 85945 Hydrometer Kamstrup Multical 62, QN4.0/DN25/Baulänge260mm/G5/4 B SMART METERING

 

MULTICAL 62 is an ultrasonic flow sensor, which is used for measurement of cold water consumption (0.1...50°C) and hot water consumption (0.1...90°C) in trade, industry and housing. 
The ultrasonic sensor does not include any mechanical parts, which means that it is not subject to wear

Meter MID approved

Storage of Consumption Data

The integrated KNX data logger stores the data at 15 minute intervals over a period of one year. The data can be read out directly via the NK-FW network coupler using a standard Internet browser. By using FTP, you can also download the stored data from the KNX/EIB module for further processing, for example with MS Excel or Flash / Silverlight. The application program offers 21 data points for further processing in the KNX/EIB bus. The individual data can be transmitted cyclically to the KNX bus.

12582
85945 HYDROMETER KAMSTRUP MULTICAL 62, QN4.0/DN25/BAULÄNGE260MM/G5/4 B SMART METERING
12583 85946 Hydrometer Kamstrup Multical 62, QN6.3/DN25/Baulänge260mm/G5/4 B SMART METERING

 

MULTICAL 62 is an ultrasonic flow sensor, which is used for measurement of cold water consumption (0.1...50°C) and hot water consumption (0.1...90°C) in trade, industry and housing. 
The ultrasonic sensor does not include any mechanical parts, which means that it is not subject to wear

Meter MID approved

Storage of Consumption Data

The integrated KNX data logger stores the data at 15 minute intervals over a period of one year. The data can be read out directly via the NK-FW network coupler using a standard Internet browser. By using FTP, you can also download the stored data from the KNX/EIB module for further processing, for example with MS Excel or Flash / Silverlight. The application program offers 21 data points for further processing in the KNX/EIB bus. The individual data can be transmitted cyclically to the KNX bus.

12583
85946 HYDROMETER KAMSTRUP MULTICAL 62, QN6.3/DN25/BAULÄNGE260MM/G5/4 B SMART METERING
12584 85301 Water meter WaterStar Qn=1.6m3/h, 80mm, G3/4", MaxTemp=30ºC SMART METERING

• electronic impeller scanning

• including KNX-interface in separate, wall mounted box, with FacilityWeb

12584
85301 WATER METER WATERSTAR QN=1.6M3/H, 80MM, G3/4", MAXTEMP=30ºC SMART METERING
12585 85302 Water meter WaterStar Qn=1.6m3/h, 80mm, G3/4", MaxTemp=90ºC SMART METERING

• electronic impeller scanning

• including KNX-interface in separate, wall mounted box, with FacilityWeb

12585
85302 WATER METER WATERSTAR QN=1.6M3/H, 80MM, G3/4", MAXTEMP=90ºC SMART METERING
12586 85303 Water meter WaterStar Qn=1.6m3/h, 110mm, G3/4", MaxTemp=30ºC SMART METERING

• electronic impeller scanning

• including KNX-interface in separate, wall mounted box, with FacilityWeb

12586
85303 WATER METER WATERSTAR QN=1.6M3/H, 110MM, G3/4", MAXTEMP=30ºC SMART METERING
12587 85304 Water meter WaterStar Qn=1.6m3/h, 110mm, G3/4", MaxTemp=90ºC SMART METERING

• electronic impeller scanning

• including KNX-interface in separate, wall mounted box, with FacilityWeb

12587
85304 WATER METER WATERSTAR QN=1.6M3/H, 110MM, G3/4", MAXTEMP=90ºC SMART METERING
12594 85315 Water meter WaterStar Qn=2.5m3/h, 130mm, G3/4", MaxTemp=30ºC SMART METERING

• electronic impeller scanning

• including KNX-interface in separate, wall mounted box, with FacilityWeb

12594
85315 WATER METER WATERSTAR QN=2.5M3/H, 130MM, G3/4", MAXTEMP=30ºC SMART METERING
12595 85316 Water meter WaterStar Qn=2.5m3/h, 130mm, G3/4", MaxTemp=90ºC SMART METERING

• electronic impeller scanning

• including KNX-interface in separate, wall mounted box, with FacilityWeb

12595
85316 WATER METER WATERSTAR QN=2.5M3/H, 130MM, G3/4", MAXTEMP=90ºC SMART METERING
15762 85805 Gas meter, 0.04-6m³/h, DN20, double adapter SMART METERING

The Elster gas meter uses an Absolute ENCODER register which allows direct read out of the meter readings by the KNX module. This greatly facilitates meter replacement as the meter reading and the serial number are read out automatically. The Lingg&Janke KNX module can be directly plugged on to the Elster gas meter.
Parameter Setting

The available parameters allow you to define the following outputs:

    Meter value (m³)
    High-resolution meter value (10 l)
    Meter status
    Serial number and meter number
    Relative up counter Meter value / Reset
    Relative down counter Meter value / Reset / Zero
    Output 15min / 60min difference (m³)
    Due date billing Date / Set

15762
85805 GAS METER, 0.04-6M³/H, DN20, DOUBLE ADAPTER SMART METERING
15763 85808 Gas meter, 0.06-10m³/h, DN32, double adapter SMART METERING

The Elster gas meter uses an Absolute ENCODER register which allows direct read out of the meter readings by the KNX module. This greatly facilitates meter replacement as the meter reading and the serial number are read out automatically. The Lingg&Janke KNX module can be directly plugged on to the Elster gas meter.
Parameter Setting

The available parameters allow you to define the following outputs:

    Meter value (m³)
    High-resolution meter value (10 l)
    Meter status
    Serial number and meter number
    Relative up counter Meter value / Reset
    Relative down counter Meter value / Reset / Zero
    Output 15min / 60min difference (m³)
    Due date billing Date / Set

15763
85808 GAS METER, 0.06-10M³/H, DN32, DOUBLE ADAPTER SMART METERING
15764 85807 Gas meter, 0.10-16m³/h, DN40, double adapter SMART METERING

The Elster gas meter uses an Absolute ENCODER register which allows direct read out of the meter readings by the KNX module. This greatly facilitates meter replacement as the meter reading and the serial number are read out automatically. The Lingg&Janke KNX module can be directly plugged on to the Elster gas meter.
Parameter Setting

The available parameters allow you to define the following outputs:

    Meter value (m³)
    High-resolution meter value (10 l)
    Meter status
    Serial number and meter number
    Relative up counter Meter value / Reset
    Relative down counter Meter value / Reset / Zero
    Output 15min / 60min difference (m³)
    Due date billing Date / Set

15764
85807 GAS METER, 0.10-16M³/H, DN40, DOUBLE ADAPTER SMART METERING
15765 85804 Gas meter, 0.16-25m³/h, DN40, double adapter SMART METERING

The Elster gas meter uses an Absolute ENCODER register which allows direct read out of the meter readings by the KNX module. This greatly facilitates meter replacement as the meter reading and the serial number are read out automatically. The Lingg&Janke KNX module can be directly plugged on to the Elster gas meter.
Parameter Setting

The available parameters allow you to define the following outputs:

    Meter value (m³)
    High-resolution meter value (10 l)
    Meter status
    Serial number and meter number
    Relative up counter Meter value / Reset
    Relative down counter Meter value / Reset / Zero
    Output 15min / 60min difference (m³)
    Due date billing Date / Set

15765
85804 GAS METER, 0.16-25M³/H, DN40, DOUBLE ADAPTER SMART METERING
15766 85809 Gas meter, 0.25-40m³/h, DN50, double adapter SMART METERING

The Elster gas meter uses an Absolute ENCODER register which allows direct read out of the meter readings by the KNX module. This greatly facilitates meter replacement as the meter reading and the serial number are read out automatically. The Lingg&Janke KNX module can be directly plugged on to the Elster gas meter.
Parameter Setting

The available parameters allow you to define the following outputs:

    Meter value (m³)
    High-resolution meter value (10 l)
    Meter status
    Serial number and meter number
    Relative up counter Meter value / Reset
    Relative down counter Meter value / Reset / Zero
    Output 15min / 60min difference (m³)
    Due date billing Date / Set

15766
85809 GAS METER, 0.25-40M³/H, DN50, DOUBLE ADAPTER SMART METERING
15767 85802 Gas meter 0,04-6 m³/h, DN25, simple adapter SMART METERING

The Elster gas meter uses an Absolute ENCODER register which allows direct read out of the meter readings by the KNX module. This greatly facilitates meter replacement as the meter reading and the serial number are read out automatically. The Lingg&Janke KNX module can be directly plugged on to the Elster gas meter.
Parameter Setting

The available parameters allow you to define the following outputs:

    Meter value (m³)
    High-resolution meter value (10 l)
    Meter status
    Serial number and meter number
    Relative up counter Meter value / Reset
    Relative down counter Meter value / Reset / Zero
    Output 15min / 60min difference (m³)
    Due date billing Date / Set

15767
85802 GAS METER 0,04-6 M³/H, DN25, SIMPLE ADAPTER SMART METERING
15768 84931 COLD METER, 0,6 m³/h, DN15, G3/4" SMART METERING

Cold meter with ultrasonic flow sensor

2 direct temperatura sensors with 1.5m

230V main supply

incluiding KNX-interface in separate, wall mounted box

with FacilityWEB functionality

15768
84931 COLD METER, 0,6 M³/H, DN15, G3/4" SMART METERING
15769 84932 COLD METER, 1.5 m³/h, DN15, G3/4" SMART METERING

Cold meter with ultrasonic flow sensor

2 direct temperatura sensors with 1.5m

230V main supply

incluiding KNX-interface in separate, wall mounted box

with FacilityWEB functionality

15769
84932 COLD METER, 1.5 M³/H, DN15, G3/4" SMART METERING
15770 84933 COLD METER, 1.5 m³/h, DN15, G3/4", 165mm SMART METERING

Cold meter with ultrasonic flow sensor

2 direct temperatura sensors with 1.5m

230V main supply

incluiding KNX-interface in separate, wall mounted box

with FacilityWEB functionality

15770
84933 COLD METER, 1.5 M³/H, DN15, G3/4", 165MM SMART METERING
15771 84934 COLD METER, 0,6 m³/h, DN20, G1" SMART METERING

Cold meter with ultrasonic flow sensor

2 direct temperatura sensors with 1.5m

230V main supply

incluiding KNX-interface in separate, wall mounted box

with FacilityWEB functionality

15771
84934 COLD METER, 0,6 M³/H, DN20, G1" SMART METERING
15772 84935 COLD METER, 1.5 m³/h, DN20, G1" SMART METERING

Cold meter with ultrasonic flow sensor

2 direct temperatura sensors with 1.5m

230V main supply

incluiding KNX-interface in separate, wall mounted box

with FacilityWEB functionality

15772
84935 COLD METER, 1.5 M³/H, DN20, G1" SMART METERING
15773 84936 COLD METER, 1.5 m³/h, DN20, G1", 165mm SMART METERING

Cold meter with ultrasonic flow sensor

2 direct temperatura sensors with 1.5m

230V main supply

incluiding KNX-interface in separate, wall mounted box

with FacilityWEB functionality

15773
84936 COLD METER, 1.5 M³/H, DN20, G1", 165MM SMART METERING
15774 84937 COLD METER, 0,6 m³/h, DN20, G1", 190mm SMART METERING

Cold meter with ultrasonic flow sensor

2 direct temperatura sensors with 1.5m

230V main supply

incluiding KNX-interface in separate, wall mounted box

with FacilityWEB functionality

15774
84937 COLD METER, 0,6 M³/H, DN20, G1", 190MM SMART METERING
15775 84938 COLD METER, 1.5 m³/h, DN20, G3/4", 190mm SMART METERING

Cold meter with ultrasonic flow sensor

2 direct temperatura sensors with 1.5m

230V main supply

incluiding KNX-interface in separate, wall mounted box

with FacilityWEB functionality

15775
84938 COLD METER, 1.5 M³/H, DN20, G3/4", 190MM SMART METERING
15776 84939 COLD METER, 2.5 m³/h, DN20, G1", 190mm SMART METERING

Cold meter with ultrasonic flow sensor

2 direct temperatura sensors with 1.5m

230V main supply

incluiding KNX-interface in separate, wall mounted box

with FacilityWEB functionality

15776
84939 COLD METER, 2.5 M³/H, DN20, G1", 190MM SMART METERING
15777 84940 COLD METER, 3.5 m³/h, DN25, G5/4", 260mm SMART METERING

Cold meter with ultrasonic flow sensor

2 direct temperatura sensors with 1.5m

230V main supply

incluiding KNX-interface in separate, wall mounted box

with FacilityWEB functionality

15777
84940 COLD METER, 3.5 M³/H, DN25, G5/4", 260MM SMART METERING
15778 84941 COLD METER, 6 m³/h, DN25, G5/4", 260mm SMART METERING

Cold meter with ultrasonic flow sensor

2 direct temperatura sensors with 1.5m

230V main supply

incluiding KNX-interface in separate, wall mounted box

with FacilityWEB functionality

15778
84941 COLD METER, 6 M³/H, DN25, G5/4", 260MM SMART METERING
15779 84942 COLD METER, 10 m³/h, DN25, G5/4", 300mm SMART METERING

Cold meter with ultrasonic flow sensor

2 direct temperatura sensors with 1.5m

230V main supply

incluiding KNX-interface in separate, wall mounted box

with FacilityWEB functionality

15779
84942 COLD METER, 10 M³/H, DN25, G5/4", 300MM SMART METERING
15780 87798 eHZ KNX interface, incl. o. reading head RS232/RJ10 SMART METERING

The eHZ KNX interface consists of the optical reading head with RS232 connector and a 3 RU DIN RAIL unit with KNX terminal housing. The various protocols of the eHZ manufacturers are read via the optical customer interface on the front side of the meter. Depending on the protocol provided by the manufacturer, meter readings such as T1/T2 values, A+ / A- values and power, voltage and current values can be read out.

The KNX/EIB module stores the measured data at 15-minute intervals over a period of one year and provides full FacilityWeb capability.

Every meter has its own web page. Via a network coupler it is possible to read out meter readings with a standard web browser.

ABNEHZ-01DZA
EMHeHZ-HW...
EMHeHZ-IW...
EMH3.HZ ED100L, ED300L, ED300S 
EasyMeterQ3DA1004
EasyMeterQ3DA1024
EasyMeterT3CC1081
EasyMeterQ3BA1000
EasyMeterQ3CB1241
HagerEHZ361ZA
HagerEHZ361D5E
HagerEHZ362Z5
HagerEHZ363ZA
Itron HZ1-C20D-R1-Z
ISKRAMT681-D4A51-K0p

15780
87798 EHZ KNX INTERFACE, INCL. O. READING HEAD RS232/RJ10 SMART METERING
15781 87797 eHZ KNX interface, incl. o. reading head RS232 SMART METERING

The eHZ KNX interface consists of the optical reading head with RS232 connector and a 3 RU DIN RAIL unit with KNX terminal housing. The various protocols of the eHZ manufacturers are read via the optical customer interface on the front side of the meter. Depending on the protocol provided by the manufacturer, meter readings such as T1/T2 values, A+ / A- values and power, voltage and current values can be read out.

The KNX/EIB module stores the measured data at 15-minute intervals over a period of one year and provides full FacilityWeb capability.

Every meter has its own web page. Via a network coupler it is possible to read out meter readings with a standard web browser.

ABN EHZ-01DZA
EMH eHZ-HW...
EMH eHZ-IW...
EMH 3.HZ ED100L, ED300L, ED300S 
EasyMeter Q3DA1004
EasyMeter Q3DA1024
EasyMeter T3CC1081
EasyMeter Q3BA1000
EasyMeter Q3CB1241
Hager EHZ361ZA
Hager EHZ361D5E
Hager EHZ362Z5
Hager EHZ363ZA
Itron  HZ1-C20D-R1-Z
ISKRA MT681-D4A51-K0p

15781
87797 EHZ KNX INTERFACE, INCL. O. READING HEAD RS232 SMART METERING
15804 84901 Heat meters Kamstrup Multical 602 (heat + cooling), Qn= 0.6m³/h, length 110mm, G3/4, DN15 SMART METERING

The Kamstrup MULTICAL® 602 is an all-purpose energy calculator for heat and cooling together with almost any kind of pulsed flow sensors and with 2 or 4 wired temperature sensor pairs. 

The Lingg & Janke KNX module is mounted in the connecting base of the meter.-

Parameter Settings

The available parameters allow you to define the following outputs: 

  • Meter value (MWh)
  • High-resolution meter value (kWh)
  • Meter value (m³) 
  • High-resolution meter value (l)
  • Meter status
  • Serial number and meter number 
  • Relative up counter Meter value / Reset
  • Relative down counter Meter value / Reset / Zero
  • Output 15min / 60min difference (m³)
  • Due date billing Date / Set
  • Output power output, flow rate and temperatures T1, T2, deltaT 
  • Limit monitoring power output, flow rate and temperatures T1, T2, deltaT, 2 thresholds each
15804
84901 HEAT METERS KAMSTRUP MULTICAL 602 (HEAT + COOLING), QN= 0.6M³/H, LENGTH 110MM, G3/4, DN15 SMART METERING
15805 84902 Heat meters Kamstrup Multical 602 (heat + cooling), Qn= 1.5 m³/h, length 110mm, G3/4, DN15 SMART METERING

The Kamstrup MULTICAL® 602 is an all-purpose energy calculator for heat and cooling together with almost any kind of pulsed flow sensors and with 2 or 4 wired temperature sensor pairs. 

The Lingg & Janke KNX module is mounted in the connecting base of the meter.-

Parameter Settings

The available parameters allow you to define the following outputs: 

  • Meter value (MWh)
  • High-resolution meter value (kWh)
  • Meter value (m³) 
  • High-resolution meter value (l)
  • Meter status
  • Serial number and meter number 
  • Relative up counter Meter value / Reset
  • Relative down counter Meter value / Reset / Zero
  • Output 15min / 60min difference (m³)
  • Due date billing Date / Set
  • Output power output, flow rate and temperatures T1, T2, deltaT 
  • Limit monitoring power output, flow rate and temperatures T1, T2, deltaT, 2 thresholds each
15805
84902 HEAT METERS KAMSTRUP MULTICAL 602 (HEAT + COOLING), QN= 1.5 M³/H, LENGTH 110MM, G3/4, DN15 SMART METERING
15806 84903 Heat meters Kamstrup Multical 602 (heat + cooling), Qn= 1.5 m³/h, longitud 165mm, G3/4, DN15 SMART METERING

The Kamstrup MULTICAL® 602 is an all-purpose energy calculator for heat and cooling together with almost any kind of pulsed flow sensors and with 2 or 4 wired temperature sensor pairs. 

The Lingg & Janke KNX module is mounted in the connecting base of the meter.-

Parameter Settings

The available parameters allow you to define the following outputs: 

  • Meter value (MWh)
  • High-resolution meter value (kWh)
  • Meter value (m³) 
  • High-resolution meter value (l)
  • Meter status
  • Serial number and meter number 
  • Relative up counter Meter value / Reset
  • Relative down counter Meter value / Reset / Zero
  • Output 15min / 60min difference (m³)
  • Due date billing Date / Set
  • Output power output, flow rate and temperatures T1, T2, deltaT 
  • Limit monitoring power output, flow rate and temperatures T1, T2, deltaT, 2 thresholds each
15806
84903 HEAT METERS KAMSTRUP MULTICAL 602 (HEAT + COOLING), QN= 1.5 M³/H, LONGITUD 165MM, G3/4, DN15 SMART METERING
15807 84904 Heat meters Kamstrup Multical 602 (heat + cooling), Qn= 0.6m³/h, longitud 130mm, G1, DN20 SMART METERING

The Kamstrup MULTICAL® 602 is an all-purpose energy calculator for heat and cooling together with almost any kind of pulsed flow sensors and with 2 or 4 wired temperature sensor pairs. 

The Lingg & Janke KNX module is mounted in the connecting base of the meter.-

Parameter Settings

The available parameters allow you to define the following outputs: 

  • Meter value (MWh)
  • High-resolution meter value (kWh)
  • Meter value (m³) 
  • High-resolution meter value (l)
  • Meter status
  • Serial number and meter number 
  • Relative up counter Meter value / Reset
  • Relative down counter Meter value / Reset / Zero
  • Output 15min / 60min difference (m³)
  • Due date billing Date / Set
  • Output power output, flow rate and temperatures T1, T2, deltaT 
  • Limit monitoring power output, flow rate and temperatures T1, T2, deltaT, 2 thresholds each
15807
84904 HEAT METERS KAMSTRUP MULTICAL 602 (HEAT + COOLING), QN= 0.6M³/H, LONGITUD 130MM, G1, DN20 SMART METERING
15808 84905 Heat meters Kamstrup Multical 602 (heat + cooling), Qn= 1.5 m³/h, longitud 130mm, G1, DN20 SMART METERING

The Kamstrup MULTICAL® 602 is an all-purpose energy calculator for heat and cooling together with almost any kind of pulsed flow sensors and with 2 or 4 wired temperature sensor pairs. 

The Lingg & Janke KNX module is mounted in the connecting base of the meter.-

Parameter Settings

The available parameters allow you to define the following outputs: 

  • Meter value (MWh)
  • High-resolution meter value (kWh)
  • Meter value (m³) 
  • High-resolution meter value (l)
  • Meter status
  • Serial number and meter number 
  • Relative up counter Meter value / Reset
  • Relative down counter Meter value / Reset / Zero
  • Output 15min / 60min difference (m³)
  • Due date billing Date / Set
  • Output power output, flow rate and temperatures T1, T2, deltaT 
  • Limit monitoring power output, flow rate and temperatures T1, T2, deltaT, 2 thresholds each
15808
84905 HEAT METERS KAMSTRUP MULTICAL 602 (HEAT + COOLING), QN= 1.5 M³/H, LONGITUD 130MM, G1, DN20 SMART METERING
15809 84906 Heat meters Kamstrup Multical 602 (heat + cooling), Qn= 1.5 m³/h, longitud 165mm, G1, DN20 SMART METERING

The Kamstrup MULTICAL® 602 is an all-purpose energy calculator for heat and cooling together with almost any kind of pulsed flow sensors and with 2 or 4 wired temperature sensor pairs. 

The Lingg & Janke KNX module is mounted in the connecting base of the meter.-

Parameter Settings

The available parameters allow you to define the following outputs: 

  • Meter value (MWh)
  • High-resolution meter value (kWh)
  • Meter value (m³) 
  • High-resolution meter value (l)
  • Meter status
  • Serial number and meter number 
  • Relative up counter Meter value / Reset
  • Relative down counter Meter value / Reset / Zero
  • Output 15min / 60min difference (m³)
  • Due date billing Date / Set
  • Output power output, flow rate and temperatures T1, T2, deltaT 
  • Limit monitoring power output, flow rate and temperatures T1, T2, deltaT, 2 thresholds each
15809
84906 HEAT METERS KAMSTRUP MULTICAL 602 (HEAT + COOLING), QN= 1.5 M³/H, LONGITUD 165MM, G1, DN20 SMART METERING
15810 84907 Heat meters Kamstrup Multical 602 (heat + cooling), Qn= 0.6m³/h, longitud 190mm, G1, DN20 SMART METERING

The Kamstrup MULTICAL® 602 is an all-purpose energy calculator for heat and cooling together with almost any kind of pulsed flow sensors and with 2 or 4 wired temperature sensor pairs. 

The Lingg & Janke KNX module is mounted in the connecting base of the meter.-

Parameter Settings

The available parameters allow you to define the following outputs: 

  • Meter value (MWh)
  • High-resolution meter value (kWh)
  • Meter value (m³) 
  • High-resolution meter value (l)
  • Meter status
  • Serial number and meter number 
  • Relative up counter Meter value / Reset
  • Relative down counter Meter value / Reset / Zero
  • Output 15min / 60min difference (m³)
  • Due date billing Date / Set
  • Output power output, flow rate and temperatures T1, T2, deltaT 
  • Limit monitoring power output, flow rate and temperatures T1, T2, deltaT, 2 thresholds each
15810
84907 HEAT METERS KAMSTRUP MULTICAL 602 (HEAT + COOLING), QN= 0.6M³/H, LONGITUD 190MM, G1, DN20 SMART METERING
15811 84908 Heat meters Kamstrup Multical 602 (heat + cooling), Qn= 1.5m³/h, longitud 190mm, G1, DN20 SMART METERING

The Kamstrup MULTICAL® 602 is an all-purpose energy calculator for heat and cooling together with almost any kind of pulsed flow sensors and with 2 or 4 wired temperature sensor pairs. 

The Lingg & Janke KNX module is mounted in the connecting base of the meter.-

Parameter Settings

The available parameters allow you to define the following outputs: 

  • Meter value (MWh)
  • High-resolution meter value (kWh)
  • Meter value (m³) 
  • High-resolution meter value (l)
  • Meter status
  • Serial number and meter number 
  • Relative up counter Meter value / Reset
  • Relative down counter Meter value / Reset / Zero
  • Output 15min / 60min difference (m³)
  • Due date billing Date / Set
  • Output power output, flow rate and temperatures T1, T2, deltaT 
  • Limit monitoring power output, flow rate and temperatures T1, T2, deltaT, 2 thresholds each
15811
84908 HEAT METERS KAMSTRUP MULTICAL 602 (HEAT + COOLING), QN= 1.5M³/H, LONGITUD 190MM, G1, DN20 SMART METERING
15812 84909 Heat meters Kamstrup Multical 602 (heat + cooling), Qn= 2.5m³/h, longitud 190mm, G1, DN20 SMART METERING

The Kamstrup MULTICAL® 602 is an all-purpose energy calculator for heat and cooling together with almost any kind of pulsed flow sensors and with 2 or 4 wired temperature sensor pairs. 

The Lingg & Janke KNX module is mounted in the connecting base of the meter.-

Parameter Settings

The available parameters allow you to define the following outputs: 

  • Meter value (MWh)
  • High-resolution meter value (kWh)
  • Meter value (m³) 
  • High-resolution meter value (l)
  • Meter status
  • Serial number and meter number 
  • Relative up counter Meter value / Reset
  • Relative down counter Meter value / Reset / Zero
  • Output 15min / 60min difference (m³)
  • Due date billing Date / Set
  • Output power output, flow rate and temperatures T1, T2, deltaT 
  • Limit monitoring power output, flow rate and temperatures T1, T2, deltaT, 2 thresholds each
15812
84909 HEAT METERS KAMSTRUP MULTICAL 602 (HEAT + COOLING), QN= 2.5M³/H, LONGITUD 190MM, G1, DN20 SMART METERING
15813 84910 Heat meters Kamstrup Multical 602 (heat + cooling), Qn= 3.5m³/h, longitud 260mm, G5/4, DN25 SMART METERING

The Kamstrup MULTICAL® 602 is an all-purpose energy calculator for heat and cooling together with almost any kind of pulsed flow sensors and with 2 or 4 wired temperature sensor pairs. 

The Lingg & Janke KNX module is mounted in the connecting base of the meter.-

Parameter Settings

The available parameters allow you to define the following outputs: 

  • Meter value (MWh)
  • High-resolution meter value (kWh)
  • Meter value (m³) 
  • High-resolution meter value (l)
  • Meter status
  • Serial number and meter number 
  • Relative up counter Meter value / Reset
  • Relative down counter Meter value / Reset / Zero
  • Output 15min / 60min difference (m³)
  • Due date billing Date / Set
  • Output power output, flow rate and temperatures T1, T2, deltaT 
  • Limit monitoring power output, flow rate and temperatures T1, T2, deltaT, 2 thresholds each
15813
84910 HEAT METERS KAMSTRUP MULTICAL 602 (HEAT + COOLING), QN= 3.5M³/H, LONGITUD 260MM, G5/4, DN25 SMART METERING
15814 84911 Heat meters Kamstrup Multical 602 (heat + cooling), Qn= 6.0m³/h, longitud 260mm, G5/4, DN25 SMART METERING

The Kamstrup MULTICAL® 602 is an all-purpose energy calculator for heat and cooling together with almost any kind of pulsed flow sensors and with 2 or 4 wired temperature sensor pairs. 

The Lingg & Janke KNX module is mounted in the connecting base of the meter.-

Parameter Settings

The available parameters allow you to define the following outputs: 

  • Meter value (MWh)
  • High-resolution meter value (kWh)
  • Meter value (m³) 
  • High-resolution meter value (l)
  • Meter status
  • Serial number and meter number 
  • Relative up counter Meter value / Reset
  • Relative down counter Meter value / Reset / Zero
  • Output 15min / 60min difference (m³)
  • Due date billing Date / Set
  • Output power output, flow rate and temperatures T1, T2, deltaT 
  • Limit monitoring power output, flow rate and temperatures T1, T2, deltaT, 2 thresholds each
15814
84911 HEAT METERS KAMSTRUP MULTICAL 602 (HEAT + COOLING), QN= 6.0M³/H, LONGITUD 260MM, G5/4, DN25 SMART METERING
15815 84912 Heat meters Kamstrup Multical 602 (heat + cooling), Qn= 10m³/h, longitud 300mm, G2, DN40 SMART METERING

The Kamstrup MULTICAL® 602 is an all-purpose energy calculator for heat and cooling together with almost any kind of pulsed flow sensors and with 2 or 4 wired temperature sensor pairs. 

The Lingg & Janke KNX module is mounted in the connecting base of the meter.-


Parameter Settings

The available parameters allow you to define the following outputs: 

  • Meter value (MWh)
  • High-resolution meter value (kWh)
  • Meter value (m³) 
  • High-resolution meter value (l)
  • Meter status
  • Serial number and meter number 
  • Relative up counter Meter value / Reset
  • Relative down counter Meter value / Reset / Zero
  • Output 15min / 60min difference (m³)
  • Due date billing Date / Set
  • Output power output, flow rate and temperatures T1, T2, deltaT 
  • Limit monitoring power output, flow rate and temperatures T1, T2, deltaT, 2 thresholds each
15815
84912 HEAT METERS KAMSTRUP MULTICAL 602 (HEAT + COOLING), QN= 10M³/H, LONGITUD 300MM, G2, DN40 SMART METERING
16295 87160 Temperature and humidity sensor, RAL 9010 SENSORS

• Colour: alike pure white RAL 9010

• temperature range - 40 ... +120 °C

• suitable for all Exclusiv 55 frames

16295
87160 TEMPERATURE AND HUMIDITY SENSOR, RAL 9010 SENSORS
17023 85410 Allmess, Water meter Qn=1.5m3/h, DN=15, 80mm, G3/4, 30ºC SMART METERING

Allmess domestic water meter

• universal wall mounted water meter
• for horizontal and vertical mounting
• including communication module and KNX-interface in wall mounted box
• with FacilityWeb functionality

17023
85410 ALLMESS, WATER METER QN=1.5M3/H, DN=15, 80MM, G3/4, 30ºC SMART METERING
17024 85411 Allmess, Water meter Qn=1.5m3/h, DN=15, 80mm, G3/4, 90ºC SMART METERING

Allmess domestic water meter

• universal wall mounted water meter
• for horizontal and vertical mounting
• including communication module and KNX-interface in wall mounted box
• with FacilityWeb functionality

17024
85411 ALLMESS, WATER METER QN=1.5M3/H, DN=15, 80MM, G3/4, 90ºC SMART METERING
17025 85412 Allmess, Water meter Qn=1.5m3/h, DN=15, 110mm, G3/4, 30ºC SMART METERING

Allmess domestic water meter

• universal wall mounted water meter
• for horizontal and vertical mounting
• including communication module and KNX-interface in wall mounted box
• with FacilityWeb functionality

17025
85412 ALLMESS, WATER METER QN=1.5M3/H, DN=15, 110MM, G3/4, 30ºC SMART METERING
17026 85413 Allmess, Water meter Qn=1.5m3/h, DN=15, 110mm, G3/4, 90ºC SMART METERING

Allmess domestic water meter

• universal wall mounted water meter
• for horizontal and vertical mounting
• including communication module and KNX-interface in wall mounted box
• with FacilityWeb functionality

17026
85413 ALLMESS, WATER METER QN=1.5M3/H, DN=15, 110MM, G3/4, 90ºC SMART METERING
17027 85414 Allmess, Water meter Qn=1.5m3/h, DN=15, 130mm, G3/4, 30ºC SMART METERING

Allmess domestic water meter

• universal wall mounted water meter
• for horizontal and vertical mounting
• including communication module and KNX-interface in wall mounted box
• with FacilityWeb functionality

17027
85414 ALLMESS, WATER METER QN=1.5M3/H, DN=15, 130MM, G3/4, 30ºC SMART METERING
17028 85415 Allmess, Water meter Qn=1.5m3/h, DN=15, 130mm, G3/4, 90ºC SMART METERING

Allmess domestic water meter

• universal wall mounted water meter
• for horizontal and vertical mounting
• including communication module and KNX-interface in wall mounted box
• with FacilityWeb functionality

17028
85415 ALLMESS, WATER METER QN=1.5M3/H, DN=15, 130MM, G3/4, 90ºC SMART METERING
17029 85416 Allmess, Water meter Qn=2.5m3/h, DN20, 130mm, G1B, 30ºC SMART METERING

Allmess domestic water meter

• universal wall mounted water meter
• for horizontal and vertical mounting
• including communication module and KNX-interface in wall mounted box
• with FacilityWeb functionality

17029
85416 ALLMESS, WATER METER QN=2.5M3/H, DN20, 130MM, G1B, 30ºC SMART METERING
17030 85417 Allmess, Water meter Qn=2.5m3/h, DN20, 130mm, G1B, 90ºC SMART METERING

Allmess domestic water meter

• universal wall mounted water meter
• for horizontal and vertical mounting
• including communication module and KNX-interface in wall mounted box
• with FacilityWeb functionality

17030
85417 ALLMESS, WATER METER QN=2.5M3/H, DN20, 130MM, G1B, 90ºC SMART METERING
17031 85430 Allmess, Water meter Qn=2.5m3/h, DN20, 190mm, G1B, 30ºC SMART METERING

• multi-jet dry running water meter
• including communication module and KNX-interface in wall mounted box
• with FacilityWeb functionality
Prices includes callibation fee / other dimentions on request

 

 

17031
85430 ALLMESS, WATER METER QN=2.5M3/H, DN20, 190MM, G1B, 30ºC SMART METERING
17032 85431 Allmess, Water meter Qn=2.5m3/h, DN20, 190mm, G1B, 90ºC SMART METERING
• multi-jet dry running water meter
• including communication module and KNX-interface in wall mounted box
• with FacilityWeb functionality
Prices includes callibation fee / other dimentions on request
17032
85431 ALLMESS, WATER METER QN=2.5M3/H, DN20, 190MM, G1B, 90ºC SMART METERING
17037 Q79532 Quick, Binary input 4-gang, 250VAC, 4 rail units, SIN FAMILIA
binary input 4-gang
• 4 independent inputs
• 4 rail units
binary input 230 V
signal voltage per input 230V AC/DC
type: BE4F230-Q
binary input for switches
potential free - max. cable length 100 m
type: BE4FK-Q
17037
Q79532 QUICK, BINARY INPUT 4-GANG, 250VAC, 4 RAIL UNITS, SIN FAMILIA
17038 Q79531 Quick, Binary input 4-gang, potential free, 4 rail units, SIN FAMILIA
binary input 4-gang
• 4 independent inputs
• 4 rail units
binary input 230 V
signal voltage per input 230V AC/DC
type: BE4F230-Q
binary input for switches
potential free - max. cable length 100 m
type: BE4FK-Q
17038
Q79531 QUICK, BINARY INPUT 4-GANG, POTENTIAL FREE, 4 RAIL UNITS, SIN FAMILIA
17039 Q79241 Quick, Binary input 8-gang with integrated switching actuator SIN FAMILIA
binary in-/output 8-gang
• for switches
• 8 channels
• switching capacity 16 A at 250 V AC
• suitable for C-load
• 9 rail units
type: BEA8FK16-Q
17039
Q79241 QUICK, BINARY INPUT 8-GANG WITH INTEGRATED SWITCHING ACTUATOR SIN FAMILIA
17040 Q79231 Quick, Switching actuator, 2 chanels, 16A, C-Load, 3U SIN FAMILIA

switching actuator 2-gang
• 2 channels
• switching capacity 16 A at 250 V AC
• suitable for C-load
• 3 rail units
type: A2F16-Q

 

 


 

17040
Q79231 QUICK, SWITCHING ACTUATOR, 2 CHANELS, 16A, C-LOAD, 3U SIN FAMILIA
17041 Q79232 Quick, Switching actuator, 4 chanels, 16A, C-Load, 4U SIN FAMILIA
switching actuator 4-gang
• 4 channels
• switching capacity 16 A at 250 V AC
• suitable for C-load
• 4 rail units
type: A4F16-Q
17041
Q79232 QUICK, SWITCHING ACTUATOR, 4 CHANELS, 16A, C-LOAD, 4U SIN FAMILIA
17042 Q79234 Quick, Switching actuator, 6 chanels, 16A, C-Load, 6U SIN FAMILIA

• 6 channels
• switching capacity 16 A at 250 V AC
• suitable for C-load
• 6 rail units
type: A6F16-Q

17042
Q79234 QUICK, SWITCHING ACTUATOR, 6 CHANELS, 16A, C-LOAD, 6U SIN FAMILIA
17047 Q79233 Quick, Switching actuator, 4 chanels, 16A, C-Load, 4U SIN FAMILIA

switching actuator 4-gang with staircase lighting function

• switching capacity 16 A at 250 V AC
• 4 channels with selectable automatic stopping times period: from 5 seconds up to 1 hour
• suitable for C-load
• 4 rail units
type: A4F16-QT

 

 


 

17047
Q79233 QUICK, SWITCHING ACTUATOR, 4 CHANELS, 16A, C-LOAD, 4U SIN FAMILIA
17048 Q77601 Quick, Universal dimming actuator 4 x 2.5A / 570W SIN FAMILIA
Universal dimming actuator 4 x 2,5A / 570W
• 4 channels
• 100% short-circuit proof
• for all dimmable light sources
• can be used for dimmable LED retrofit lamps
• can be used for dimmable energy saving lamps
• flicker-free dimming range 0-100%
• 12 rail units
type: DIM4FU-2-FW-Q
17048
Q77601 QUICK, UNIVERSAL DIMMING ACTUATOR 4 X 2.5A / 570W SIN FAMILIA
17049 Q79431 Quick, Shutter actuator 2-fold, 6A ACTUATORS - OUTPUTS
Blind / shutter actuator 2-gang order-no.
• 2 independent drives
• switching capacity 6 A at 250 V AC
• 3 rail units
17049
Q79431 QUICK, SHUTTER ACTUATOR 2-FOLD, 6A ACTUATORS - OUTPUTS
17050 Q79432 Quick, Shutter actuator 4-fold, 6A ACTUATORS - OUTPUTS

Blind / shutter actuator 4-gang
• 4 independent drives
• switching capacity 6 A at 250 V AC
• 4 rail units
type: J4F6-Q

17050
Q79432 QUICK, SHUTTER ACTUATOR 4-FOLD, 6A ACTUATORS - OUTPUTS
17051 Q79434 Quick, Shutter actuator 6-fold, 6A ACTUATORS - OUTPUTS
Blind / shutter actuator 6-gang
• 6 independent drives
• switching capacity 6 A at 250 V AC
• 6 rail units
type: J6F6-Q
17051
Q79434 QUICK, SHUTTER ACTUATOR 6-FOLD, 6A ACTUATORS - OUTPUTS
17052 Q79433 Quick, Shutter actuator 4-fold, 6A, with individual control for each channel ACTUATORS - OUTPUTS

• switching capacity 6 A at 250 V AC
• blind or shutter mode is individually selectable for each of the 4 channels, provides maximum flexibility in your installation
• 4 rail units

type: J4F6-QA

17052
Q79433 QUICK, SHUTTER ACTUATOR 4-FOLD, 6A, WITH INDIVIDUAL CONTROL FOR EACH CHANNEL ACTUATORS - OUTPUTS
17053 Q77890 Quick, Push-button interface for single rocker SIN FAMILIA
• requires push button sensor module Q77898 or design switch push button interface for single rocker
type: TS2F-1-QW
17053
Q77890 QUICK, PUSH-BUTTON INTERFACE FOR SINGLE ROCKER SIN FAMILIA
17054 Q77891 Quick, Push-button interface for double rocker SIN FAMILIA

• requires push button sensor module Q77898 or design switch


push button interface for double rocker
type: TS4F-1-QW

17054
Q77891 QUICK, PUSH-BUTTON INTERFACE FOR DOUBLE ROCKER SIN FAMILIA
17055 Q77892 Quick, Push-button interface for single rocker, LED SIN FAMILIA
• requires push button sensor module Q77899 or design switch
• LED is listening to central control commands (via GR Y)
push button interface for single rocker with LED
type: TS2FL-1-QW
17055
Q77892 QUICK, PUSH-BUTTON INTERFACE FOR SINGLE ROCKER, LED SIN FAMILIA
17056 Q77893 Quick, Push-button interface for double rocker, LED SIN FAMILIA
• requires push button sensor module Q77899 or design switch
• LED is listening to central control commands (via GR Y)
push button interface for single rocker with LED
type: TS2FL-1-QW
17056
Q77893 QUICK, PUSH-BUTTON INTERFACE FOR DOUBLE ROCKER, LED SIN FAMILIA
17057 Q77898 4-button module without bus coupler SIN FAMILIA

• 4-button-module without bus coupling unit
• requires push button interface
• including pre-fabricated connection cable to connect to push button interface

push button sensor module without LED

17057
Q77898 4-BUTTON MODULE WITHOUT BUS COUPLER SIN FAMILIA
17635 Oferta_Pack1 Pack 1 - Include ref: BEA4F230H-E + A4F16H-E + J4F6H-E + TS4F-2-E SIN FAMILIA

ECO+ Actuator 4 chanels 16A C-Load, manual operation + 4 Binary input 230VAC 6U

ECO+, Switching actuator, 4 chanels, 16A, C-Load, 4U, manual operation

ECO+, Shutter actuator 4-fold, 6A, 4U, manual operation

ECO+, Universal intefaces 4 fold

 

17635
OFERTA_PACK1 PACK 1 - INCLUDE REF: BEA4F230H-E + A4F16H-E + J4F6H-E + TS4F-2-E SIN FAMILIA
17638 Oferta-Pack3 Pack 3 - Include ref: BEA8F230H-E + A6F16H-E + J6F6H-E + TS8F-2-E SIN FAMILIA

ECO+ Actuator 8 chanels 16A C-Load, manual operation + 8 Binary input 230VAC 8U

ECO+, Switching actuator, 6 chanels, 16A, C-Load, 6U, manual operation

ECO+, Shutter actuator 6-fold, 6A, 6U, manual operation

ECO+, Universal intefaces 8 fold

 

17638
OFERTA-PACK3 PACK 3 - INCLUDE REF: BEA8F230H-E + A6F16H-E + J6F6H-E + TS8F-2-E SIN FAMILIA
18093 87735 Kamstrup energy meter, three-phase meter for 4-quadrant direct measuring SMART METERING

The Kamstrup energy meter is a direct measuring three-phase meter for 4-quadrant measurement with FacilityWeb functionality.

Parameter Setting

Comprehensive parameters allow you to define the following outputs:
(type dependent)
- Meter value Active energy Delivery
- Meter value Active energy Infeed
- Meter value Reactive energy leading
- Meter value Reactive energy lagging
- High-resolution meter values
- Relative up counter Meter reading / Reset
- Relative down counter Meter reading / Set / Zero
- Output 15min / 60min Difference Active power
- Due date billing Date / Set
- Tariff 1/2 Active energy Delivery / Infeed
- Tariff 1/2 Reactive energy leading / lagging
- Tariff changeover
- Output Tariff number / Meter number / Serial number
- Meter status
- Output Current L1 L2 L3
- Output Voltage L1 L2 L3
- Output Active power delivery / infeed
- Output Reactive power leading / lagging
- Output Active power L1 L2 L3 (delivery)
- Limit monitoring Active power 2 thresholds each delivery / infeed
- Limit monitoring Reactive power 2 thresholds each leading / lagging
- Limit monitoring Active power L1 L2 L3, 2 thresholds each
- Limit monitoring Voltage L1 L2 L3, 2 thresholds each
- Limit monitoring Current L1 L2 L3, 2 thresholds each
- Selection FacilityWeb log function
- Transformer ratio, cos Phi

18093
87735 KAMSTRUP ENERGY METER, THREE-PHASE METER FOR 4-QUADRANT DIRECT MEASURING SMART METERING
18120 85812 Itron Gas meter, external surfacemounting enclosure.0,04 - 6 m³/h single tube SMART METERING

Itron Gas meter

The Itron gas meter uses its own Itron interface for reading out the meter reading and serial number. The Lingg&Janke KNX module is installed in an external surfacemounting enclosure.

Parameter Setting

The available parameters allow you to define the following outputs:

  • Meter value (m³)
  • High-resolution meter value (10 l)
  • Meter status 
  • Serial number and meter number 
  • Relative up counter Meter value / Reset
  • Relative down counter Meter value / Reset / Zero
  • Output 15min / 60min difference (m³)
  • Due date billing Date / Set

Storage of Consumption Data

The integrated KNX data logger stores the data at 15 minute intervals over a period of one year. The data can be read out directly via the NK-FW network coupler using a standard Internet browser. By using FTP, you can also download the stored data from the KNX/EIB module for further processing, for example with MS Excel or Flash / Silverlight. The application program offers 15 data points for further processing in the KNX/EIB bus. The individual data can be transmitted cyclically to the KNX bus.

18120
85812 ITRON GAS METER, EXTERNAL SURFACEMOUNTING ENCLOSURE.0,04 - 6 M³/H SINGLE TUBE SMART METERING
18433 87981 KNX interface single for Allmess Cyble module V 1.4 SMART METERING

KNX interfaces from Lingg & Janke for the cross-manufacturer integration of gas, water and heat quantity counters to the KNX bus. This makes it easy to read the counter values.

product features
-comprehensive FacilityWeb® functionality (in conjunction with KNX network coupler NK-FW xx)
-integrated data logger for values
Thresholds and setpoints via browser
-HTTP protocol homepage directly from the device

18433
87981 KNX INTERFACE SINGLE FOR ALLMESS CYBLE MODULE V 1.4 SMART METERING
18469 79245 Binary input 8-gang with integrated switching actuator ACTUATORS - OUTPUTS

KNX eco+ binary in-/output 8-gang, BEA8F24H-E, signal voltage 24V, manual operation, switching capacity 16A / 250 V AC, suitable for C-load, 9 rail units

18469
79245 BINARY INPUT 8-GANG WITH INTEGRATED SWITCHING ACTUATOR ACTUATORS - OUTPUTS
4391 88323 AK2 bus connectors yellow / whitek KNX ACCESSORIES

Standard KNX connector for the auxiliary power supply of the devices and also to branch the bus

(up to 4 pairs), in yellow/white colour.

4391
88323 AK2 BUS CONNECTORS YELLOW / WHITEK KNX ACCESSORIES
9853 86006 STANDARD MODUL INSERTS 10AX, 250V, - ROCKER SWITCH CHANGE OVER PUSH BUTTONS
KNX-IP Switches are compatilble with KOPP Design HK05 KNX IP-Switch KNX IP switches by Lingg & Janke comprise a main module with KNX bus coupling unit. Up to three extension modules, connected by prefabricated cables, open out the functional range of the KNX IP switch main module. As many as 16 switching functions can thus be implemented without great expense, using just one bus coupling unit. Both, main and extension modules, can accommodate single or double rocker switches. The rockers are designed as pushbuttons with neutral position so that they can provide different switching functions, such as ON/OFF, dimmer, or louvre blinds control. Easy Parameter Definition In the ETS application software, you always go through the same steps when setting the module parameters, be it the main module or the extension module. For every module you decide whether the switch function is to be implemented by a rocker switch action or a single-key pushbutton action. The switch action itself can be an ON/OFF or dimmer operation, louvre blinds or scenario control, or a value setting function. Our Range of Switches The switching rockers are available in the color arctic-white and with laser-engraved labeling. All IP switching modules are offered with single or double rocker unit. KNX IP switches are compatible with the Kopp Design HK05 switch range and can thus be freely combined with these devices.
9853
86006 STANDARD MODUL INSERTS 10AX, 250V, - ROCKER SWITCH CHANGE OVER PUSH BUTTONS
9857 86005 STANDARD MODUL INSERTS 10AX, 250V, - ROCKER SWITCH SERIES PUSH BUTTONS
KNX-IP Switches are compatilble with KOPP Design HK05 KNX IP-Switch KNX IP switches by Lingg & Janke comprise a main module with KNX bus coupling unit. Up to three extension modules, connected by prefabricated cables, open out the functional range of the KNX IP switch main module. As many as 16 switching functions can thus be implemented without great expense, using just one bus coupling unit. Both, main and extension modules, can accommodate single or double rocker switches. The rockers are designed as pushbuttons with neutral position so that they can provide different switching functions, such as ON/OFF, dimmer, or louvre blinds control. Easy Parameter Definition In the ETS application software, you always go through the same steps when setting the module parameters, be it the main module or the extension module. For every module you decide whether the switch function is to be implemented by a rocker switch action or a single-key pushbutton action. The switch action itself can be an ON/OFF or dimmer operation, louvre blinds or scenario control, or a value setting function. Our Range of Switches The switching rockers are available in the color arctic-white and with laser-engraved labeling. All IP switching modules are offered with single or double rocker unit. KNX IP switches are compatible with the Kopp Design HK05 switch range and can thus be freely combined with these devices.
9857
86005 STANDARD MODUL INSERTS 10AX, 250V, - ROCKER SWITCH SERIES PUSH BUTTONS
9858 86031 STANDARD MODUL INSERTS 10AX, 250V, - ROCKER PUSH BUTTON (NO) PUSH BUTTONS
KNX-IP Switches are compatilble with KOPP Design HK05 KNX IP-Switch KNX IP switches by Lingg & Janke comprise a main module with KNX bus coupling unit. Up to three extension modules, connected by prefabricated cables, open out the functional range of the KNX IP switch main module. As many as 16 switching functions can thus be implemented without great expense, using just one bus coupling unit. Both, main and extension modules, can accommodate single or double rocker switches. The rockers are designed as pushbuttons with neutral position so that they can provide different switching functions, such as ON/OFF, dimmer, or louvre blinds control. Easy Parameter Definition In the ETS application software, you always go through the same steps when setting the module parameters, be it the main module or the extension module. For every module you decide whether the switch function is to be implemented by a rocker switch action or a single-key pushbutton action. The switch action itself can be an ON/OFF or dimmer operation, louvre blinds or scenario control, or a value setting function. Our Range of Switches The switching rockers are available in the color arctic-white and with laser-engraved labeling. All IP switching modules are offered with single or double rocker unit. KNX IP switches are compatible with the Kopp Design HK05 switch range and can thus be freely combined with these devices.
9858
86031 STANDARD MODUL INSERTS 10AX, 250V, - ROCKER PUSH BUTTON (NO) PUSH BUTTONS
10824 243-112 Fixing carrier for 4 push-wire connectors KNX ACCESSORIES

To fix on the DIN rail up to 4 halves of KNX standard connectors

10824
243-112 FIXING CARRIER FOR 4 PUSH-WIRE CONNECTORS KNX ACCESSORIES
10825 243-113 Fixing carrier for 6 push-wire connectors KNX ACCESSORIES

Fixing carrier for 6 push-wire connectors

10825
243-113 FIXING CARRIER FOR 6 PUSH-WIRE CONNECTORS KNX ACCESSORIES
11103 87610 Additional circuit for LED retrofits and energy saving lamps,REG ACTUATORS - OUTPUTS

The supplementary circuit for energy saving lamps and LED lamps improves the dimming behaviour of ESL and retrofit LED lamps. (LED lamps that can replace conventional incandescent lamps with identical base). Energy saving lamps and LED lamps have an electric ballast integrated in their base that limits the mains voltage to a level suitable for lamp operation. This electric ballast may prevent the detection of the main voltage zero crossing that is required for proper dimming operation, with the result that the lamp may start flickering.

  • Simple parallel connection to the load (neutral conductor N and dimming phase LD can be connected either way, reverse connection impossible)
  • Suitable for 230 VAC
  • Operation independent of the load quantity
  • Maximum power dissipation during dimming 1.7W, no stand-by losses
  • Snap-on DIN rail housing with practical double terminals (ZSL-REG only)
  • Range: from minimum load to maximum dimmer current
11103
87610 ADDITIONAL CIRCUIT FOR LED RETROFITS AND ENERGY SAVING LAMPS,REG ACTUATORS - OUTPUTS
11104 87611 Additional circuit for LED retrofits and energy saving lamps ACTUATORS - OUTPUTS

The supplementary circuit for energy saving lamps and LED lamps improves the dimming behaviour of ESL and retrofit LED lamps. (LED lamps that can replace conventional incandescent lamps with identical base). Energy saving lamps and LED lamps have an electric ballast integrated in their base that limits the mains voltage to a level suitable for lamp operation. This electric ballast may prevent the detection of the main voltage zero crossing that is required for proper dimming operation, with the result that the lamp may start flickering.

  • Simple parallel connection to the load (neutral conductor N and dimming phase LD can be connected either way, reverse connection impossible)
  • Suitable for 230 VAC
  • Operation independent of the load quantity
  • Maximum power dissipation during dimming 1.7W, no stand-by losses
  • Snap-on DIN rail housing with practical double terminals (ZSL-REG only)
  • Range: from minimum load to maximum dimmer current
11104
87611 ADDITIONAL CIRCUIT FOR LED RETROFITS AND ENERGY SAVING LAMPS ACTUATORS - OUTPUTS
12482 88011 Design wall frame Apple iPad 2/3 VISUALIZATION
Design wall frame Apple iPad 2/3
• Magnetic mounting on wall 4 screws
• right vertical or horizontal installation
12482
88011 DESIGN WALL FRAME APPLE IPAD 2/3 VISUALIZATION
12484 88021 Design wall frame Apple iPad1 VISUALIZATION
  • Design wall frame Apple iPad1
  • Magnetic mounting on wall 4 screws
  • right vertical or horizontal installation
12484
88021 DESIGN WALL FRAME APPLE IPAD1 VISUALIZATION
12486 88031 Design wall frame Apple iPad Mini VISUALIZATION

Design wall frame Apple iPad Mini

• Magnetic mounting on wall 4 screws
• right vertical or horizontal installation

12486
88031 DESIGN WALL FRAME APPLE IPAD MINI VISUALIZATION
12490 88051 Design wall frame Apple iPhone 3 VISUALIZATION

Design wall frame Apple iPhone 3

• Magnetic mounting on wall 4 screws
• right vertical or horizontal installation

12490
88051 DESIGN WALL FRAME APPLE IPHONE 3 VISUALIZATION
12492 88041 Design wall frame Apple IPod Touch 4 Generation SIN FAMILIA

• fits into built-in-boxes

• magnetic mounting on 4 wall screws

• vertical or horizontal mounting

12492
88041 DESIGN WALL FRAME APPLE IPOD TOUCH 4 GENERATION SIN FAMILIA
15676 87805 Connecting cables, 20 cm PUSH BUTTONS
Connecting cables 20cm
15676
87805 CONNECTING CABLES, 20 CM PUSH BUTTONS
16013 88071 Frame Apple iPad Air VISUALIZATION

Design wall frame Apple

• fits into built-in-boxes

• magnetic mounting on 4 wall screws

• vertical or horizontal mounting

16013
88071 FRAME APPLE IPAD AIR VISUALIZATION
16478 86221 Exclusiv 55, Frame pure white RAL 9010 1 gang PUSH BUTTONS

Frame pure white RAL 9010 1 gang

16478
86221 EXCLUSIV 55, FRAME PURE WHITE RAL 9010 1 GANG PUSH BUTTONS
16479 86222 Frame pure white RAL 9010 2 gangs PUSH BUTTONS

Frame pure white RAL 9010 2 gangs

16479
86222 FRAME PURE WHITE RAL 9010 2 GANGS PUSH BUTTONS
16480 86223 Frame pure white RAL 9010 3 gangs PUSH BUTTONS

Frame pure white RAL 9010 3 gangs

16480
86223 FRAME PURE WHITE RAL 9010 3 GANGS PUSH BUTTONS
16481 86224 Exclusiv 55, Frame pure white RAL 9010 4 gangs PUSH BUTTONS

Frame pure white RAL 9010 4 gangs

16481
86224 EXCLUSIV 55, FRAME PURE WHITE RAL 9010 4 GANGS PUSH BUTTONS
16482 86225 Frame pure white RAL 9010 5 gangs PUSH BUTTONS

Frame pure white RAL 9010 5 gangs

16482
86225 FRAME PURE WHITE RAL 9010 5 GANGS PUSH BUTTONS
16511 85864 kit HZ5/6/ 12mm SMART METERING

for integration in 12 mm suction line (single chord system)

2x bolting G1/8x8mm, 1x single chord system dirt filter

16511
85864 KIT HZ5/6/ 12MM SMART METERING
16642 87820 Exclusiv 55, Rocker units, compatible with Exclusiv 55 PUSH BUTTONS
• Colour: pure white RAL 9010
• all modules can accommodate single or double rocker units
• all modules may have rocker switch action or single-key pushbutton action
• all rocker units are available with or without laser-engraved labelling.
• KNX IP-Switches are compatible with Exclusiv 55
16642
87820 EXCLUSIV 55, ROCKER UNITS, COMPATIBLE WITH EXCLUSIV 55 PUSH BUTTONS
16888 87823 Exclusiv 55, double rocker units PUSH BUTTONS

• Colour: pure white RAL 9010

• all modules can accommodate single or double rocker units

• all modules may have rocker switch action or single-key pushbutton action

• all rocker units are available with or without laser-engraved labelling.

• KNX IP-Switches are compatible with Exclusiv 55

16888
87823 EXCLUSIV 55, DOUBLE ROCKER UNITS PUSH BUTTONS
17036 89411 Replacement relay for blinds actuator ACTUATORS - OUTPUTS
Repuesto rele para actuador persianas
17036
89411 REPLACEMENT RELAY FOR BLINDS ACTUATOR ACTUATORS - OUTPUTS
17100 88003 Power supply with USB connection VISUALIZATION
• fits into built-in-boxes
• power supply with USB connection, cable for device connection is not included in the delivery
• max. output current 1A
17100
88003 POWER SUPPLY WITH USB CONNECTION VISUALIZATION


KNX SPECIAL CATALOGUES
Different looks for KNX push buttons
Push buttons
Smart metering
Iddero Verso Interactive Presentation

LEARN
Free webinars
uBrick Tutorials
VideoTutorials CBSE


PARTICIPATE
µBrick Trivia
KNX Tips & tricks
TEST
Free test of CBSE visualization

LATEST KNX NEWS
All news

LATEST KNX OFFERS
All offers
DOWNLOADS
KNX - All brands

FUTURASMUS KNX GROUP
Contact
Location
Futurasmus in the world
FOLLOW US
YouTube Channel
Facebook
LinkedIN
Google+
Twitter

KNX++ TRAINING CENTER
Futurasmus Zentrum

CERTIFIED KNX TEST LAB
Futurasmus KNX Lab
SPECIALIZED KNX WHOLESALER CERTIFIED KNX TRAINING CENTRE
Futurasmus KNX Group is a highly specialized and internationally active KNX Wholesaler, being our forte the excellent technical support we provide. You can visit our online catalogue in this website and, if you are a professional, ask for a non binding offer for your KNX projects. Should you be interested in buying KNX components, you are welcome to read our General Sales Conditions and contact our technicians and commercial agents per telephone, e-mail or online help. Since 2003 we have been a Certified Training Centre KNX++, which means that we are entitled to impart the KNX Basic Course as well as the KNX Advanced Course and KNX Tutor Course. We are manufacturer-independent and also offer other specialized and monographic KNX seminars. After teaching more than 1.500 KNX partners, our KNX Trainers have quite a large and positive expertise. Please, contact us for customized KNX training worldwide (groups of at least 8 people) at training@futurasmus-knxgroup.org
USE OF COOKIES
We use our own and third-party cookies, analyzing your browsing habits in out website, with the finality of ensuring the quality, security and improvement of the offered services through the same. In the case that the user does not explicitly state whether to accept the installation of cookies, but continues using our website, it will mean that he has consented expressly, informing him about the possibility to block or remove the installed cookies on his computer by configuring the appropriate settings of the browser. You can get more information on this subject reading our "Cookies Policy".