Order by:   Filter results: 
Web Code Reference Description Category Price
8110 10 00 27 DALI Weiche for diagnostics of EIB-DALI Gateways SYSTEM DEVICES
* Additional module to the EIBDoktor * Integrated DALI 2-wire connection * incl. USB cable set * Records DALI-telegrams parallel to KNX/EIB-telegramms. * EIBDoktor required!
8110
10 00 27 DALI WEICHE FOR DIAGNOSTICS OF EIB-DALI GATEWAYS SYSTEM DEVICES
10628 10 00 16 EIB-Mediatechnic-Gateway IP (REG) GATEWAYS

Accessing the EIB/KNX with AMX/Crestron/other mediatechnic controllers.

The Medientechnik Gateway IP is basically an EIBWeiche ASCII Terminal device in a DIN-Product information

Accessing the EIB/KNX with AMX/Crestron/other mediatechnic controllers.

The Medientechnik Gateway IP is basically an EIBWeiche ASCII Terminal device in a DIN-rail mounting case. It comes with example programs for AMX media controllers, but the easy LAN handling of the gateway makes it simple to adapt other media controllers as well: although the EIB Medientechnik Gateway IP contains a large instruction set, usually three command sequences will suffice:

 -  Write a value to a group address: “W groupaddress = value”, e.g. “W1/2/3=1”
 - Request a value from a group address: “R groupaddress”, e.g. “R1/2/3”                            -Listening to group address telegrams: a “Physical address > group address=value” sequence will be send from the gateway to the LAN when a telegram is detected. For example, if the device “2.3.4” is sending the value “1” to the group address “3/2/1”, you will receive a “02.03.04>03/02/001=1” sequence. You can even let the gateway filter the incoming data, or tell the gateway that you want to use specific data formats.

Please note: The device is also available as "EIB Medientechnik Gateway" with serial interface!

  • Simple access to the EIB/KNX
  • Standard ASCII-Code
  • Supports all group addresses simultaneously
  • Supports all EIS-types
  • Simple setup using a terminal program
  • Built in german and english help texts
  • Fully transparent even at 100% bus load
  • Built in filter- and EIS-type tables?
  • All values read and writeable using plain text
  • Simple integration of the EIB/KNX into own systems (PC, Microcontroller, Linux,…)
  • Built in bus coupling unit
  • LAN 10/100 MBit Interface, no system drivers required
  • Rail mounted device (9TE = 158mm) with integrated 85V - 240V wide range power supply
10628
10 00 16 EIB-MEDIATECHNIC-GATEWAY IP (REG) GATEWAYS
4439 10 00 17 EIB Infra-red-receiver in Artcase GATEWAYS
· with integrated buscoupler · shapely housing for on-wall mounting · supports all 32767 group addresses at the same time · required remote-control: Philips Pronto, All-in-one or Nevo
4439
10 00 17 EIB INFRA-RED-RECEIVER IN ARTCASE GATEWAYS
4440 10 00 18 EIB IR Controller REG GATEWAYS
· for connection to max 8 * E001-H011001 · DIN-rail-mounted · supports all 32767 group addresses at the same time · required remote-control: Philips Pronto, All-in-one or Nevo
4440
10 00 18 EIB IR CONTROLLER REG GATEWAYS
4441 10 00 19 EIB IR Sensor (universal mounting modul) GATEWAYS
without integrated EIB-buscoupler
4441
10 00 19 EIB IR SENSOR (UNIVERSAL MOUNTING MODUL) GATEWAYS
4473 10 00 20 enocean-EIB-gateway in Artcase GATEWAYS
. with integrated buscoupler . shapely housing for on-wall mounting . supports 50 enocean devices and 160 group addresses . for connecting of enocean (easy-click) devices to the EIB
4473
10 00 20 ENOCEAN-EIB-GATEWAY IN ARTCASE GATEWAYS
4647 10 00 30 EIB-Mediatechnic-Gateway GATEWAYS
The simplest serial EIB/KNX-coupling for mediatechnic! Applications: Simple, bidirectional coupling without loss of telegrams of the EIB/KNX with mediatechnic (AMX, Crestron, Philips Pronto...) Coupling over ASCII-protocol with only three ASCII-sequences: R0/0/1 creates a read request for GA 0/0/1 W1/0/1=1 sends an ON-telegram to group address 1/0/1 >00/0/003=1 reception of a telegram from GA 0/0/3 with value 1 Benefits: Simultaneous reading and writing of all EIB/KNX group address-telegrams (also non-EIS) Full read- and write access on group addresses
4647
10 00 30 EIB-MEDIATECHNIC-GATEWAY GATEWAYS
5027 10 00 02 EIBWeiche Visualization serial complete bundle SYSTEM DEVICES
· 2-wire EIB connection · incl. EIBWeiche serial in compact case incl. open protocol "OPENEIB" and protocol ``Standard BIM 1.0`` (ETS) (Because of 100% busload ability perfect for visualizions) · incl. PS2 5V-adaptor · Replaces the serial buscoupler and serial interface by using the ETS2 1.1b - 1.3 and ETS3 · incl. objekt based OPC-server · incl. EIB-visualization EIBCP (local, 16Bit) · incl. EIB-visualization FIAVis (local, 32Bit, 500PPs) · incl. file based ASCII-interface · EIB.VB, ActiveX and DLL
5027
10 00 02 EIBWEICHE VISUALIZATION SERIAL COMPLETE BUNDLE SYSTEM DEVICES
5028 10 00 00 EIBWeiche Visualization USB complete bundle VISUALIZATION
Details: * 2-wire EIB connection * incl. EIBWeiche USB in compact case or REG incl. cable set (Because of 100% busload ability perfect for visualizions) * Replaces the serial buscoupler and serial interface by using the ETS2 1.1b - 1.3 and ETS3 * incl. objekt based OPC-server * incl. EIB-visualization EIBCP (local, 16Bit) * incl. EIB-visualization FIAVis (local, 32Bit, 500PPs) * incl. file based ASCII-interface * EIB.VB, ActiveX and DLL
5028
10 00 00 EIBWEICHE VISUALIZATION USB COMPLETE BUNDLE VISUALIZATION
5029 10 00 12 EIBAnalyzer for error search without PC incl. USB-Stick SYSTEM DEVICES
* DIN-rail mounted device for recording EIB-telegrams without PC * incl. USB cable set * EIBDoktor-software included in delivery * Incl. 1 GB USB-Stick
5029
10 00 12 EIBANALYZER FOR ERROR SEARCH WITHOUT PC INCL. USB-STICK SYSTEM DEVICES
5030 10 00 22 EIBTester for detecting parasitic switching operations SYSTEM DEVICES
* Additional module to the EIBDoktor * 8 potential-free inputs 230V~ * incl. USB cable set * detects switching operations of binary inputs and actuators in relation to EIB-telegrams * EIBDoktor required!
5030
10 00 22 EIBTESTER FOR DETECTING PARASITIC SWITCHING OPERATIONS SYSTEM DEVICES
5033 10 00 40 OPTION FIAVIS IP (ADDITIONAL SOFTWARE FOR VISU FIAVIS) VISUALIZATION
Permits not only the local EIB-access over the EIBWeiche or the network accescc over the EIBSPS, but also the EIB-access over IP-Routers up to 500PPs overall. **** FIAVis is a new visualization solution which is included in (but not limited to) our EIBWeiche and EIB-SPS packages. FIAVis has a central data pool which is running as a Windows Service (2000/XP/Vista x86), this data pool holds all current values of all parametrized addresses from the connected bus systems. External applications (visualization/GLT systems) can access this data pool by the included OPCServer / ActiveX /WEB interfaces, but of course FIAVis comes also with its own visualization software, the FIAVis Commander. You can create as many Commander runtime projects as you like, with no additional license fees, so for example you can easily create individual panels for each user in a big building, each panel can connect to the central data pool by LAN. The central data pool can also act as a value monitor (storing values into database files for statistics), as a router (to connect two different worlds), and as a soft-PLC (Soft-SPS) to execute programmable logic functions/time functions. Beside the EIBWeiche and EIBSPS the data pool also supports Siemens/ABB IP Router as an EIB connection (optional, need a special license) and even completely different bus systems can be connected to the data pool, using the OPC interface (also an optional license is required).
5033
10 00 40 OPTION FIAVIS IP (ADDITIONAL SOFTWARE FOR VISU FIAVIS) VISUALIZATION
5034 10 00 95 Option FIAVis Universal 500 (ADDITIONAL SOFTWARE FOR VISU FIAVIS) VISUALIZATION
Permits not only the local EIB-access over the EIBWeiche or the network accescc over the EIBSPS, but also the EIB-access over IP-Routers and third-party OPC-Servers up to 500PPs overall *** FIAVis is a new visualization solution which is included in (but not limited to) our EIBWeiche and EIB-SPS packages. FIAVis has a central data pool which is running as a Windows Service (2000/XP/Vista x86), this data pool holds all current values of all parametrized addresses from the connected bus systems. External applications (visualization/GLT systems) can access this data pool by the included OPCServer / ActiveX /WEB interfaces, but of course FIAVis comes also with its own visualization software, the FIAVis Commander. You can create as many Commander runtime projects as you like, with no additional license fees, so for example you can easily create individual panels for each user in a big building, each panel can connect to the central data pool by LAN. The central data pool can also act as a value monitor (storing values into database files for statistics), as a router (to connect two different worlds), and as a soft-PLC (Soft-SPS) to execute programmable logic functions/time functions. Beside the EIBWeiche and EIBSPS the data pool also supports Siemens/ABB IP Router as an EIB connection (optional, need a special license) and even completely different bus systems can be connected to the data pool, using the OPC interface (also an optional license is required).
5034
10 00 95 OPTION FIAVIS UNIVERSAL 500 (ADDITIONAL SOFTWARE FOR VISU FIAVIS) VISUALIZATION
5035 10 00 39 OPTION FIAVIS UMLIMITED (ADDITIONAL SOFTWARE FOR VISU FIAVIS) VISUALIZATION
Unlimited FIAVis Process Points *** FIAVis is a new visualization solution which is included in (but not limited to) our EIBWeiche and EIB-SPS packages. FIAVis has a central data pool which is running as a Windows Service (2000/XP/Vista x86), this data pool holds all current values of all parametrized addresses from the connected bus systems. External applications (visualization/GLT systems) can access this data pool by the included OPCServer / ActiveX /WEB interfaces, but of course FIAVis comes also with its own visualization software, the FIAVis Commander. You can create as many Commander runtime projects as you like, with no additional license fees, so for example you can easily create individual panels for each user in a big building, each panel can connect to the central data pool by LAN. The central data pool can also act as a value monitor (storing values into database files for statistics), as a router (to connect two different worlds), and as a soft-PLC (Soft-SPS) to execute programmable logic functions/time functions. Beside the EIBWeiche and EIBSPS the data pool also supports Siemens/ABB IP Router as an EIB connection (optional, need a special license) and even completely different bus systems can be connected to the data pool, using the OPC interface (also an optional license is required).
5035
10 00 39 OPTION FIAVIS UMLIMITED (ADDITIONAL SOFTWARE FOR VISU FIAVIS) VISUALIZATION
5036 10 00 41 Option FIAVis IP unlimited (ADDITIONAL SOFTWARE FOR VISU FIAVIS) VISUALIZATION
* No limit for process items under FIAVis * Permits not only the local EIB-access over the EIBWeiche or the network accescc over the EIBSPS, but also the EIB-access over IP-Routers with no limit for process items *** FIAVis is a new visualization solution which is included in (but not limited to) our EIBWeiche and EIB-SPS packages. FIAVis has a central data pool which is running as a Windows Service (2000/XP/Vista x86), this data pool holds all current values of all parametrized addresses from the connected bus systems. External applications (visualization/GLT systems) can access this data pool by the included OPCServer / ActiveX /WEB interfaces, but of course FIAVis comes also with its own visualization software, the FIAVis Commander. You can create as many Commander runtime projects as you like, with no additional license fees, so for example you can easily create individual panels for each user in a big building, each panel can connect to the central data pool by LAN. The central data pool can also act as a value monitor (storing values into database files for statistics), as a router (to connect two different worlds), and as a soft-PLC (Soft-SPS) to execute programmable logic functions/time functions. Beside the EIBWeiche and EIBSPS the data pool also supports Siemens/ABB IP Router as an EIB connection (optional, need a special license) and even completely different bus systems can be connected to the data pool, using the OPC interface (also an optional license is required).
5036
10 00 41 OPTION FIAVIS IP UNLIMITED (ADDITIONAL SOFTWARE FOR VISU FIAVIS) VISUALIZATION
5037 10 00 89 OPTION FIAVIS UMLIMITED (ADDITIONAL SOFTWARE FOR VISU FIAVIS) VISUALIZATION
* No limit for process items under FIAVis * Free access over third-party OPC-Servers and IP-Routers *** FIAVis is a new visualization solution which is included in (but not limited to) our EIBWeiche and EIB-SPS packages. FIAVis has a central data pool which is running as a Windows Service (2000/XP/Vista x86), this data pool holds all current values of all parametrized addresses from the connected bus systems. External applications (visualization/GLT systems) can access this data pool by the included OPCServer / ActiveX /WEB interfaces, but of course FIAVis comes also with its own visualization software, the FIAVis Commander. You can create as many Commander runtime projects as you like, with no additional license fees, so for example you can easily create individual panels for each user in a big building, each panel can connect to the central data pool by LAN. The central data pool can also act as a value monitor (storing values into database files for statistics), as a router (to connect two different worlds), and as a soft-PLC (Soft-SPS) to execute programmable logic functions/time functions. Beside the EIBWeiche and EIBSPS the data pool also supports Siemens/ABB IP Router as an EIB connection (optional, need a special license) and even completely different bus systems can be connected to the data pool, using the OPC interface (also an optional license is required).
5037
10 00 89 OPTION FIAVIS UMLIMITED (ADDITIONAL SOFTWARE FOR VISU FIAVIS) VISUALIZATION
5163 10 00 14 EIB ASCII TERMINAL GATEWAYS
Details: * with ASCII-protocol on serial line (RS232) * simultaneous sending and receiving of telegrams * 2-wire EIB connection Fields of application: * Coupling to any EIB-world over ASCII-protocol without control sign * Access to EIB from own programs (no PC necessary) * Visualization of EIB installations with Visual Basic and the enclosed EIB.VB Advantages: * Simultaneous reading and writing of all EIB-groupaddress-telegrams (also non-EIS) * Full read- and write access on group addresses
5163
10 00 14 EIB ASCII TERMINAL GATEWAYS
8098 10 00 07 EIBDoktor professional IP serial SYSTEM DEVICES
. EIB-diagnostic- and reconstruction tool with BCU-Editor . Diagnostic of local EIB-telegrams and LAN tunneled telegrams (over IP-router) at the same time . Incl. EIBWeiche serial in compact case with open serial protocol OPENEIB and protocol Standard BIM 1.0 (ETS) . Incl. cable set and PS2 5V-adapter . replaces the serial buscoupler and serial interface by using the ETS2 1.1b - 1.3b and ETS3 . Incl. object based OPC-Server . Incl. EIB-Visualization EIBCP (lokal, 16Bit) . Incl. EIB-Visualization FIAVis (lokal, 32Bit, 500PPs) . Incl. file based ASCII-interface . Incl. EIB.VB, ActiveX and DLL . (contains same software as EIBWeiche visualization serial bundle but with EIBDoktor IP)
8098
10 00 07 EIBDOKTOR PROFESSIONAL IP SERIAL SYSTEM DEVICES
8101 10 00 08 EIBDoktor professional IP USB complete bundle SYSTEM DEVICES
· EIB-diagnostic- und reconstruction tool with BCU-Editor · diagnostic of local EIB-telegrams and LAN tunneled telegrams (over IP-router) at the same time · incl. EIBWeiche USB in compact case incl. cable set · replaces the serial buscoupler and serial interface by using the ETS2 ab 1.1b - 1.3b and ETS3 · incl. object based OPC-Server · incl. EIB-Visualization EIBCP (lokal, 16Bit) · incl. EIB-Visualization FIAVis (lokal, 32Bit, 500PPs) · incl. file based ASCII-interface · incl. EIB.VB, ActiveX and DLL · (contains same as EIBWeiche visualization USB bundle but with EIBDoktor IP)
8101
10 00 08 EIBDOKTOR PROFESSIONAL IP USB COMPLETE BUNDLE SYSTEM DEVICES
8104 E002-U902011 Upgrade EIBDoktor Profi IP serial SIN FAMILIA
Upgrade of an EIBDoktor Profi serial to an EIBDoktor Profi IP serial (serial number of EIBWeiche required) no additional costs of delivery
8104
E002-U902011 UPGRADE EIBDOKTOR PROFI IP SERIAL SIN FAMILIA
8105 E002-U902012 Upgrade EIBDoktor Profi IP USB SYSTEM DEVICES
Upgrade of an EIBDoktor Profi USB to an EIBDoktor Profi IP USB (serial number of EIBWeiche required) no additional costs of delivery
8105
E002-U902012 UPGRADE EIBDOKTOR PROFI IP USB SYSTEM DEVICES
8107 E002-U902022 Upgrade EIBDoktor Profi IP USB SYSTEM DEVICES
Upgrade of an EIBDoktor Standard USB to an EIBDoktor Profi IP USB (EIBWeiche is to be sent back to b+b Automations- und Steuerungstechnik GmbH)
8107
E002-U902022 UPGRADE EIBDOKTOR PROFI IP USB SYSTEM DEVICES
8108 10 00 05 EIBDoktor professional serial SYSTEM DEVICES
· EIB-diagnostic- und reconstruction tool with BCU-Editor · incl. EIBWeiche serial in compact case with open serial protocol OPENEIB and protocol Standard BIM 1.0 (ETS) · incl. cable set and PS2 5V-adapter · replaces the serial buscoupler and serial interface by using the ETS2 ab 1.1b - 1.3b and ETS3 · incl. object based OPC-Server · incl. EIB-Visualization EIBCP (lokal, 16Bit) · incl. EIB-Visualization FIAVis (lokal, 32Bit, 500PPs) · incl. file based ASCII-interface · incl. EIB.VB, ActiveX and DLL · (contains same as EIBWeiche visualization serial bundle but with EIBDoktor)
8108
10 00 05 EIBDOKTOR PROFESSIONAL SERIAL SYSTEM DEVICES
8109 10 00 06 EIBDoktor professional USB SYSTEM DEVICES
· EIB-diagnostic- und reconstruction tool with BCU-Editor · incl. EIBWeiche USB in compact case incl. cable set · replaces the serial buscoupler and serial interface by using the ETS2 ab 1.1b - 1.3b and ETS3 · incl. object based OPC-Server · incl. EIB-Visualization EIBCP (lokal, 16Bit) · incl. EIB-Visualization FIAVis (lokal, 32Bit, 500PPs) · incl. file based ASCII-interface · incl. EIB.VB, ActiveX and DLL · (contains same as EIBWeiche visualization USB bundle but with EIBDoktor)
8109
10 00 06 EIBDOKTOR PROFESSIONAL USB SYSTEM DEVICES
8112 10 00 32 Option FIAVis Evolution 15 inch VISUALIZATION
· Touch Panel PC 10' · Front panel in stainless steel design · No moving parts (hard disk, fan) · Maximal current consumption 24 Watt · Integrated EIB-2wire-connection (EIBWeiche) · incl. EIB-Visualization FIAVis (without limitation in number of process items) · incl. object based OPC-Server · incl. Web-Server with Ajax-technology
8112
10 00 32 OPTION FIAVIS EVOLUTION 15 INCH VISUALIZATION
8115 10 00 01 EIBWeiche Visualization USB complete bundle, REG VISUALIZATION
Details: * 2-wire EIB connection * incl. EIBWeiche USB in compact case or REG incl. cable set (Because of 100% busload ability perfect for visualizions) * Replaces the serial buscoupler and serial interface by using the ETS2 1.1b - 1.3 and ETS3 * incl. objekt based OPC-server * incl. EIB-visualization EIBCP (local, 16Bit) * incl. EIB-visualization FIAVis (local, 32Bit, 500PPs) * incl. file based ASCII-interface * EIB.VB, ActiveX and DLL
8115
10 00 01 EIBWEICHE VISUALIZATION USB COMPLETE BUNDLE, REG VISUALIZATION
8116 10 00 04 EIBWeiche USB REG (DIN-rail-mounted) SYSTEM DEVICES
· 2-wire EIB connection · incl. EIBWeiche USB in REG incl. USB cable set · Replaces the serial buscoupler and serial interface by using the ETS2 1.1b - 1.3 and ETS3
8116
10 00 04 EIBWEICHE USB REG (DIN-RAIL-MOUNTED) SYSTEM DEVICES
8126 10 00 13 EIBAcknowledge device SYSTEM DEVICES
· Prevents repeated telegrams when line couplers are used without filter tables · Incorrect telegrams keep unackowledged. So the operational safety is not reduced · DIN-rail-mounted, 2 units wide · 2-wire EIB standard connector · Uses no physical address
8126
10 00 13 EIBACKNOWLEDGE DEVICE SYSTEM DEVICES
8132 10 00 15 KNX-GSM Gateway DIN-rail-mounted GATEWAYS
· With integrated buscoupler · Integrated slot for SIM card · 8 mobilephone numbers configurable · 100 events for sending a SMS configurable · No limitation regarding writing of values per SMS to EIB
8132
10 00 15 KNX-GSM GATEWAY DIN-RAIL-MOUNTED GATEWAYS
5031 10 00 21 enocean-IP-Gateway, bidirectional in clip box GATEWAYS
· with integrated 10/100MBit network interface · incl. OPC-Server · open IP-Protococl for integration into own systems · shapely housing in earth contact type plug · no mounting work, simply plug in in the power socket · receives infinite number of enocean-devices · sends on up to 128 enocean-channels · for connecting of enocean (easy-click) devices to TCP/IP
5031
10 00 21 ENOCEAN-IP-GATEWAY, BIDIRECTIONAL IN CLIP BOX GATEWAYS
10893 10 00 28 KNX M-Bus Gateway GATEWAYS

Gateway between M-Bus and KNX for energy recording by M-Bus energy meters

 

Highlights

  • Direct link to KNX (two-wire)
  • Link to wired M-Bus
  • Reading of current consumption values, meter readings, flow and return temperatures  
  • Each KNX M-Bus Gateway can transfer up to 200 measured values
  • Up to 25 M-Bus devices can be connected to each KNX M-Bus Gateway
  • Cyclic requests are possible, parameterisation per device is possible
  • Integrated M-Bus diagnosis functions
  • Simple parameterisation via USB and bb-terminal
  • Supports primary and secondary M-Bus addresses
  • Rail mounted device (6TE = 105mm) with integrated 85V – 260V wide range power supply
  • Interfaces present:
    • EIB/KNX 2-wire connection through standard EIB/KNX bus terminal
    • USB connection through Mini USB socket
    • M-Bus connection through spring clips:
      • M-Bus data rate 2400 Baud
      • max. 25 M-Bus meter

 

Using the EIB-MBus-Gateway
The KNX M-Bus Gateway serves for communication between the EIB/KNX bus system and M-Bus-capable meters. The gateway assumes the role of M-Bus Master, i.e. it controls communication. M-Bus energy meter data can be read either in cycles at certain intervals or on request by the EIB/KNX bus system. Different data formats can be set for each measured value, so that the consumption value can be sent to the EIB/KNX Bus as a whole number, a temperature value as a KNX flow point value, etc..

 

The KNX M-Bus Gateway also offers several diagnosis functions for M-Bus meters, such as automated search and identification of the M-Bus slaves connected. The answering data sent by the meter is presented in detail in clear text, so that the time-consuming procurement of M-Bus telegram description is dispensed with. The diagnosis functions can be used through simple ASCII commands.

 

Parameterisation and diagnosis is performed through the integrated USB interfaces in connection with our b+b Terminal Software.

 

The gateway hardware consists of a 6TE (= 105mm) wide rail mounting housing with integrated 85V – 260V power unit and connections for M-Bus and EIB/KNX at the same time. The device is maintenance-free without fan or any other wear parts.

 

Applications

  • Simple integration of M-Bus meters in EIB/KNX systems
  • Reading of current consumption values, meter readings and flow and return temperatures
  • Diagnosis functions for M-Bus meters

 

10893
10 00 28 KNX M-BUS GATEWAY GATEWAYS
11174 10 00 29 KNX OPUS Gateway AUDIO

• Visualization of OPUS states in the EIB/KNX bussystem

• Controlling of OPUS instruction from the EIB/KNX bussystem

• Parametrization with up to 200 channels

• Simple parameterization via USB interface

• Rail mounted device (6TE = 105mm) with integrated 85V – 260V wide range power supply

 Available interfaces:

  • EIB/KNX 2-wire connection through standard EIB/KNX bus terminal
  • USB connection through Mini USB socket
  • RS-232 serial connection through D-Sub 9 pole connector
11174
10 00 29 KNX OPUS GATEWAY AUDIO
15927 10 00 64 FIAVis App Commander (License) VISUALIZATION

• Using the KNX SPS as a FIAVis App visualization server

• Single-user licence: connection of one mobile device (iOS/Android/Windows) to t he KNX SPS

• Up to 100 licenses per KNX SPS, unlimited licences on application

15927
10 00 64 FIAVIS APP COMMANDER (LICENSE) VISUALIZATION
16146 10 00 59 KNX MODBUS GATEWAY GATEWAYS

 Highlights KNX Modbus Gateway

Direct link to EIB/KNX (two-wire)

Link to Modbus RTU (RS-485)

Read the current values from electric meters,electricity supply systems, etc.

Support for all major Modbus Function codes:

Read Coils, Read Discrete Inputs, Read Holding

Registers, Read Input Registers, Write Single Coil,

Write Single Register, Write Multiple Coils, Write

Multiple Registers

Cyclic polling of the slaves

Each KNX Modbus Gateway can transfer up to 300 measured values

Up to 30 Modbus slaves can be connected to each KNX Modbus Gateway

KNX status message in case of a Modbus Slave failure

Simple parameterization via USB and b+b Terminal software

Rail mounted device (6TE = 105mm) with integrated

85V – 240V wide range power supply~

16146
10 00 59 KNX MODBUS GATEWAY GATEWAYS
17756 10 00 93 EIBDoktor Profi IP LAN complete bundle SYSTEM DEVICES
 
• EIB / KNX diagnostics and parameterization tool with BCU editor
• Simultaneous diagnosis of local EIB / KNX and KNXnet / IP
Telegrams when using KNXnet / IP routers
• incl. EIB Soft LAN in a 4U (= 70 mm)
• Replaces serial bus coupler and serial interface when programming with the ETS
• incl. Object-based OPC server
• incl. EIB / KNX visualization FIAVis (up to 500 process points)
• incl. File-based ASCII interface
• incl. EIB.VB, ActiveX and DLL
• Contents like EIB Soft visualization LAN Complete package, but with EIBDoctor IP
17756
10 00 93 EIBDOKTOR PROFI IP LAN COMPLETE BUNDLE SYSTEM DEVICES
17757 10 01 00 KNXGuard – Protects the EIB/KNX installation against reconfiguration SIN FAMILIA

Applications

  • Protects your EIB/KNX system from unwanted programming access
  • Blocks all physical write telegrams
  • Physical device monitoring possible
  • Can be used as an ACK device
  • EIB/KNX-2-wire connection
  • Alarming
  • Device readout still permitted but programming is prevented
  • The device can be activated/deactived with the EIBDoktor to permit device programming
  • The deactivation is secured by means of a PIN/RSA algorithm
  • Housing for installation in flush-mounted socket
  • No physical address needed

Benefits

  • Protects the EIB/KNX installation against reconfiguration
  • Protects the EIB/KNX installation against reading
  • No physical address occupied
17757
10 01 00 KNXGUARD – PROTECTS THE EIB/KNX INSTALLATION AGAINST RECONFIGURATION SIN FAMILIA
17758 10 00 94 EIBWeiche EIB / KNX-Viszalisierung FIAVis LAN (DIN rail housing) VISUALIZATION
• EIB/KNX 2-wire standard connector
• External power supply 12V – 24V AC/DC
• DIN Rail housing, 4 TE (=70 mm)
• RJ-45 network interface 10/100 MBit
• incl. EIB/KNX viszalization FIAVis (up to 500 process items)
• incl. object based OPC-server
17758
10 00 94 EIBWEICHE EIB / KNX-VISZALISIERUNG FIAVIS LAN (DIN RAIL HOUSING) VISUALIZATION
8106 E002-U902021 Upgrade EIBDoktor Profi IP serial SYSTEM DEVICES
Upgrade of an EIBDoktor Standard serial to an EIBDoktor Profi IP serial (EIBWeiche is to be sent back to b+b Automations- und Steuerungstechnik GmbH) )
8106
E002-U902021 UPGRADE EIBDOKTOR PROFI IP SERIAL SYSTEM DEVICES


KNX SPECIAL CATALOGUES
Different looks for KNX push buttons
Push buttons
Smart metering
Iddero Verso Interactive Presentation

LEARN
Free webinars
uBrick Tutorials
VideoTutorials CBSE


PARTICIPATE
µBrick Trivia
KNX Tips & tricks
TEST
Free test of CBSE visualization

LATEST KNX NEWS
All news

LATEST KNX OFFERS
All offers
DOWNLOADS
KNX - All brands

FUTURASMUS KNX GROUP
Contact
Location
Futurasmus in the world
FOLLOW US
YouTube Channel
Facebook
LinkedIN
Google+
Twitter

KNX++ TRAINING CENTER
Futurasmus Zentrum

CERTIFIED KNX TEST LAB
Futurasmus KNX Lab
SPECIALIZED KNX WHOLESALER CERTIFIED KNX TRAINING CENTRE
Futurasmus KNX Group is a highly specialized and internationally active KNX Wholesaler, being our forte the excellent technical support we provide. You can visit our online catalogue in this website and, if you are a professional, ask for a non binding offer for your KNX projects. Should you be interested in buying KNX components, you are welcome to read our General Sales Conditions and contact our technicians and commercial agents per telephone, e-mail or online help. Since 2003 we have been a Certified Training Centre KNX++, which means that we are entitled to impart the KNX Basic Course as well as the KNX Advanced Course and KNX Tutor Course. We are manufacturer-independent and also offer other specialized and monographic KNX seminars. After teaching more than 1.500 KNX partners, our KNX Trainers have quite a large and positive expertise. Please, contact us for customized KNX training worldwide (groups of at least 8 people) at training@futurasmus-knxgroup.org
USE OF COOKIES
We use our own and third-party cookies, analyzing your browsing habits in out website, with the finality of ensuring the quality, security and improvement of the offered services through the same. In the case that the user does not explicitly state whether to accept the installation of cookies, but continues using our website, it will mean that he has consented expressly, informing him about the possibility to block or remove the installed cookies on his computer by configuring the appropriate settings of the browser. You can get more information on this subject reading our "Cookies Policy".