Order by:   Filter results: 
Web Code Reference Description Category Price
1966 SU/S 30.640.1 SU/S30.640.1 Power supply,640mA,MDRC SYSTEM DEVICES
Power supply with integrated choke for the ABB i-bus® EIB / KNX system voltage. Connected to the bus line via a bus connecting terminal. For supply of the EIB bus voltage in case of a mains failure, a 12 V DC sealed lead acid battery can be connected.

1966
SU/S 30.640.1 SU/S30.640.1 POWER SUPPLY,640MA,MDRC SYSTEM DEVICES
10512 PD/U1.3.1 3.5" TFT color display with rotary control key Busch-priOn VISUALIZATION
programmable KNX 3,5´ TFT color display with a rotary input device to be installed into the base support 2x and 3x (6346 / 11 and 6346 / 12) represents and operates up to 120 KNX functions. With integrated weekly timer, alarm clock, timer, light scene function, screen saver and control of multimedia devices via KNX system functions through labeled custom icons and text.Primay KNX functions are defined by the color light surrounding the rotary control element, display of up to 10 messages, Temperature regulator function and Date / Time.
10512
PD/U1.3.1 3.5" TFT COLOR DISPLAY WITH ROTARY CONTROL KEY BUSCH-PRION VISUALIZATION
11056 VAA/S 6.230.2.1 Valve Drive Actuator, 6-fold, 230 V, MDRC CLIMATE CONTROL
For controlling thermoelectric valve drives in heating/cooling systems at 24...230 V AC. The outputs are protected against short circuits and overload and can be switched via manual push buttons during commissioning
11056
VAA/S 6.230.2.1 VALVE DRIVE ACTUATOR, 6-FOLD, 230 V, MDRC CLIMATE CONTROL
11057 VAA/S 12.230.2.1 Valve Drive Actuator, 12-fold, 230 V, MDRC CLIMATE CONTROL
For controlling thermoelectric valve drives in heating/cooling systems at 24...230 V AC. The outputs are protected against short circuits and overload and can be switched via manual push buttons during commissioning
11057
VAA/S 12.230.2.1 VALVE DRIVE ACTUATOR, 12-FOLD, 230 V, MDRC CLIMATE CONTROL
1967 AM/S 12.1 BATTERY MODULE, 12 V DC, MDRC SYSTEM DEVICES
Sealed lead acid battery module for maintaining the ABB i-bus® system voltage in case of a mains failure in connection with the Uninterruptible EIB Power Supply SU/S 30.640.1. Connection is made via standard cables. Minimum backup time: 10 min.
1967
AM/S 12.1 BATTERY MODULE, 12 V DC, MDRC SYSTEM DEVICES
1973 DR/S 4.1 DR/S4.1 Choke,MDRC SYSTEM DEVICES
For decoupling the bus line from the power supply. The device has a reset switch for isolating the bus voltage and resetting the bus devices connected to this line. Connedtion to ABB i-bus® via Bus Connection Terminal. No Data Rail required.

1973
DR/S 4.1 DR/S4.1 CHOKE,MDRC SYSTEM DEVICES
1980 USB/S 1.1 USB/S1.1 USB-Interface,MDRC SYSTEM DEVICES
USB Interface, MDRC The USB interface enables the communication between the PC and the EIB/KNX system. Display of data transfer via EIB LED and USB LED. The USB interface can be used starting with ETS 3.0.
1980
USB/S 1.1 USB/S1.1 USB-INTERFACE,MDRC SYSTEM DEVICES
1985 LL/S 1.1 OPTICAL FIBRE INTERFACE, MDRC SIN FAMILIA
Optical Fibre Interface, MDRC Used to couple two sections of an ABB i-bus® line using an optical fibre link in order to bridge longer distances or to avoid having to implement lightning and overvoltage protection when laying cables between buildings.
1985
LL/S 1.1 OPTICAL FIBRE INTERFACE, MDRC SIN FAMILIA
1989 VB/K 100.1 Wiring Jumper, horizontal, 100 mm SYSTEM DEVICES
Wiring Jumper, horizontal, 100 mm For the interconnection of devices with a bus connection terminal on the front of the device. Prefabricated jumpers for connecting the devices horizontally. For the interconnection of devices with a bus connection terminal on the front of the device. Prefabricated jumpers for connecting the devices horizontally.
1989
VB/K 100.1 WIRING JUMPER, HORIZONTAL, 100 MM SYSTEM DEVICES
1990 VB/K 200.1 Wiring Jumper, horizontal, 200 mm SYSTEM DEVICES
For the interconnection of devices with a bus connection terminal on the front of the device. Prefabricated jumpers for connecting the devices horizontally.
1990
VB/K 200.1 WIRING JUMPER, HORIZONTAL, 200 MM SYSTEM DEVICES
1991 VB/K 270.1 Wiring Jumper, vertical, 270 mm SYSTEM DEVICES
For the interconnection of devices with a bus connection terminal on the front of the device. Prefabricated jumpers for connecting the devices vertically.
1991
VB/K 270.1 WIRING JUMPER, VERTICAL, 270 MM SYSTEM DEVICES
1996 BUSKLEMME Bus Connection Terminals (red/black) SYSTEM DEVICES
For connecting bus devices to the ABB i-bus® EIB as well as for looping through or branching the bus cable. Available in black/red for use as EIB bus connecting terminal and in white/yellow for use as a connecting terminal, for auxiliary voltages and signals. polarity protection built into the EIB devices, no damage occurs.
1996
BUSKLEMME BUS CONNECTION TERMINALS (RED/BLACK) SYSTEM DEVICES
1998 US/E 1 Surge Arrester SYSTEM DEVICES
Surge Arrester Protects EIB/KNX components against overvoltage.
1998
US/E 1 SURGE ARRESTER SYSTEM DEVICES
2015 US/U 2.2 US/U2.2 Universal Interface, 2-fold, FM INPUTS
Universal Interface, 2-fold, FM The Universal Interface has 2 channels which can be parameterised as inputs or outputs, e.g. for connection of conventional push-buttons, auxiliary contacts, LEDs and electronic relays ER/U 1.1. Requires ETS2 V1.2a.
2015
US/U 2.2 US/U2.2 UNIVERSAL INTERFACE, 2-FOLD, FM INPUTS
2016 US/U 4.2 US/U4.2 Universal Interface, 4-fold, FM INPUTS
Universal Interface, 4-fold, FM The Universal Interface has 4 channels which can be parameterised as inputs or outputs, e.g. for connection of conventional push-buttons, auxiliary contacts, LEDs and electronic relays ER/U 1.1. Requires ETS2 V1.2a.
2016
US/U 4.2 US/U4.2 UNIVERSAL INTERFACE, 4-FOLD, FM INPUTS
2040 JSB/S 1.1 JSB/S1.1 Shutter Control Unit,MDRC ACTUATORS - OUTPUTS
Shutter Control Unit, MDRC

Controls shutter actuators via the ABB i-bus® according to the position of the sun. The shutter control unit contains the functions of anti-glare protection and daylight redirection for up to 4 façades. Shadow objects can be taken into consideration
2040
JSB/S 1.1 JSB/S1.1 SHUTTER CONTROL UNIT,MDRC ACTUATORS - OUTPUTS
2049 DG/S 8.1 DALI Gateway, 8-fold, MDRC GATEWAYS
DALI Gateway, 8-fold, MDRC

For controlling DALI devices (electronic ballasts, transformers etc.) via the ABB i-bus®. 8 separate output channels, each with up to 16 DALI devices. The addressing or commissioning of the DALI devices is not necessary.
2049
DG/S 8.1 DALI GATEWAY, 8-FOLD, MDRC GATEWAYS
2062 FC/S 1.1 FC/S1.1 Fan Coil Controller,MDRC CLIMATE CONTROL
Controls motor-driven and thermal heating and ventilation valves as well as multi-speed fans via the ABB i-bus® or as a stand-alone device in combination with the temperature sensor TS/K 1.1. Two binary inputs for 24 V AC signalling contacts.
2062
FC/S 1.1 FC/S1.1 FAN COIL CONTROLLER,MDRC CLIMATE CONTROL
2068 LM/S 1.1 LM/S1.1 Logic Module, MDRC CONTROLLERS
Logic Module, MDRC

For solving control tasks. Up to three of the functions can be implemented at the same time, e.g. logic gate, filter, time delay, multiplier, min/max value, comparator, toggle values, limit supervision, format converter, switch sequences, scenes
2068
LM/S 1.1 LM/S1.1 LOGIC MODULE, MDRC CONTROLLERS
2143 SCM/S 1.1 SCM/S1.1 Security Module, MDRC CONTROLLERS
Security Module, MDRC

Provides logic functions to built up a security system in small and medium-sized EIB/KNX installations in combination with other EIB/KNX devices, e.g. zone terminals, motion detectors. Up to 64 different zones. Internal relay can be used for alarming
2143
SCM/S 1.1 SCM/S1.1 SECURITY MODULE, MDRC CONTROLLERS
2162 WRK/W LOCK BOLT SWITCHING CONTACT ALARMS CENTRAL
LLock Bolt Switching Contact For installation in the strike plate. Used for lock monitoring on doors. Water-tight IP 68, with 2.5 m connection cable LIYY 3 x 0.14 mm².
2162
WRK/W LOCK BOLT SWITCHING CONTACT ALARMS CENTRAL
4666 SMB/S 1.1 Fault Monitoring Unit, MDRC CONTROLLERS
Fault Monitoring Unit, MDRC The fault monitoring unit SMB/S 1.1 is used to detect up to 100 error messages via ABB i-bus®. The error messages are processed within the unit and can be forwarded to a display unit.
4666
SMB/S 1.1 FAULT MONITORING UNIT, MDRC CONTROLLERS
4728 DSM/S 1.1 Diagnosis and Protection Module, MDRC DSM/S 1.1 SYSTEM DEVICES
The diagnosis and protection module enables quick diagnostics of the bus state and indicates telegram traffic via an LED. A bus fault is indicated by normally open and normally closed contacts.

The DSM incorporates a suppressor diode which suppresses transient overvoltages and interference voltage spikes on the KNX.

The DSM/S is a rail mounted modular installation device for installation in distribution boards.

The connection to the ABB i-bus® is established using the bus connection terminal.
4728
DSM/S 1.1 DIAGNOSIS AND PROTECTION MODULE, MDRC DSM/S 1.1 SYSTEM DEVICES
4729 EUB/S 1.1 EUB/S1.1 EIB Monitoring Unit, MDRC CONTROLLERS
EIB Monitoring Unit, MDRC The EIB Monitoring Unit EUB/S 1.1 enables monitoring of up to 100 bus members in EIB / KNX systems. The devices are monitored to ensure their presence and minimum functionality (send and receive)
4729
EUB/S 1.1 EUB/S1.1 EIB MONITORING UNIT, MDRC CONTROLLERS
4730 ST/K 1.1 Electromotor Valve Drive, REG CLIMATE CONTROL
Electromotor Valve Drive

Proportional valve drive for controlling heating valves. Has 5 LEDs to indicate valve position and 2 binary inputs for presence contact and/or window contact. Using the valve adapters supplied, the valve drive can be used on many conventional valve bases.
4730
ST/K 1.1 ELECTROMOTOR VALVE DRIVE, REG CLIMATE CONTROL
5362 ABZ/S 2.1 Application Unit Time, MDRC TIME TRANSMITTERS - SWITCHES

A season time switch, day routines with switching times, week routines and special days.

Quantities can be provided, which are called over trips.

Each switching time can release several actions.

Application program only for the ETS3.
5362
ABZ/S 2.1 APPLICATION UNIT TIME, MDRC TIME TRANSMITTERS ...
5687 AA/S 4.1 Analogue Actuator, 4-fold, MDRC (0 -1 V DC, 0 - 20 mA, 0 - 10 V DC 4 - 20 mA) ACTUATORS - OUTPUTS
The Analogue Actuator converts measured data received via the EIB / KNX to analogue output signals.

The device features four outputs.

The analogue outputs can be used as current or voltage outputs with adjustable output signals.

The number of analogue outputs can be increased to 8 using the Analogue Actuator Module AAM/S.

The Analogue Actuator is a DIN rail device for installation in the distribution board.

The connection to the EIB / KNX is established using a bus connection terminal.

The device needs an external 24 V AC power supply.

Technical Data

Power supply Operating voltage
Bus voltage
Current consumption device / EIB / KNX
Power consumption
24 V AC ± 10 %
21 . 30 V DC via EIB / KNX
Max. 310 mA / < 10 mA
typ. 150 mW
Outputs 4 analogue outputs A1.A4
Signal type
Output signal load
Extendable with Analogue Actuator
Module AAM/S to 8 outputs
0 ... 1 V DC 0 ... 20 mA
0 ... 10 V DC 4 ... 20 mA
depending on parameterisation
Voltage signal:  1 k?
Current signal:  500 ?
Output current Voltage signal
Current signal
Max. 10 mA per channel
Max. 20 mA per channel
Operating and display elements Device status display
Output signal A1.A4 display
Programming button and LED (red)
Status LED (3-colour: red, orange, green)
Status LED (yellow)
For assignment of the physical address
Connections EIB / KNX
Analogue outputs A1.A4
24 V AC power supply
System connector, 6-pole
Bus connection terminal (black/red)
2 screw terminals per output/terminal
Conductor cross-section:
single-core: 0.50 - 4.0 mm²
stranded: 0.34 - 4.0 mm²
stranded: 0.14 - 2.5 mm²
Connection for max. 1 analogue actuator
module
Enclosure IP 20, EN 60 529
Ambient temperature range Operation
Storage
Transport
- 5 °C ... + 45 °C
- 25 °C ... + 70 °C
- 25 °C ... + 70 °C
Humidity Ambient/Storage/Transport Max. 93 % rel. humidity, no condensation
Design Modular installation device
Housing, colour Plastic housing, grey
Installation On 35 mm mounting rail to DIN EN 50 022
Dimensions 90 x 72 x 69.5 mm (H x W x D)
Mounting depth / width 70 mm / 4 modules at 18 mm
Weight approx. 180 g
Mounting position as required
Approvals EIB / KNX to EN 50 090-1, -2
CE mark in accordance with the EMC guideline and
low voltage guideline
5687
AA/S 4.1 ANALOGUE ACTUATOR, 4-FOLD, MDRC (0 -1 V DC, 0 - 20 MA, 0 - 10 V DC 4 - 20 MA) ACTUATORS - OUTPUTS
5689 DG/S 1.1 DALI Gateway, 1-fold, MDRC DG/S 1.1, GATEWAYS
The 1-fold EIB / DALI Gateway DG/S 1.1  is a modular installation device in proM
design (4 MW) for installation in the distribution  board on 35 mm mounting rails.
The DALI gateway can integrate devices  with DALI interfaces into an EIB / KNX
building installation.
Up to 64 DALI slaves can be connected  to a main channel A. Each one of the  64 devices is individual addressable and  can be directly switched, dimmed or set
the brightness with just one EIB / KNX  communication object. A further 64 individual
addressable DALI devices can be  connected on a second auxiliary channel B.
These channel is primary used as broadcast channel. In combination with an
extern logic or a visualisation it is possible  via two communication objects to control
each DALI device.
The DALI address assignment is implemen  ted automatically by the DALI gate way.
The DALI slaves are immediately ready  for control. With the DGS11-Soft ware-Tool
it is possible to change the DALI address  according individual project requirements.
The DALI gateway DG/S 1.1 is a DALI  controller (master) and requires an additional
AC or DC voltage. No DALI power  supply is required. The DALI current sources
for 2 x 64 DALI slaves are inte gra ted  into the gateway.

Technical Data
Operating voltage - Mains voltage 85.265 V AC, 50/60 Hz, 110.240 V DC
- Total power consumption from the system max. 12.5 W at 230 V AC and max. load
- Total current input from the system max. 55 mA at 230 V AC and max. load
- Total leakage loss from the device max. 6 W at 230 V AC and max. load
- Current input via the EIB < 10 mA at 29 V DC
- Power consumption via the EIB < 150 mW
DALI outputs (channels) - Number channels 2 independent acc., to IEC 60929/62386
Main channel: 64 individually controlled
Auxiliary channel: 64 broadcast controlled
- Number of DALI devices 128 (max. 64 per output)
- Cable length per output
- Cable cross-section 0.5 mm2 100 m
0.75 mm2 150 m
1.0 mm2 200 m
1.5 mm2 300 m
Connections - EIB / KNX Screwless bus connection terminal,
0.6 to 0.8 mm Ø, single-core
- DALI outputs and Screw terminal
- Mains voltage 0.2 . 2.5 mm2 fi nely stranded
0.2 . 4 mm2 single-core
- Tightening torque max. 0.6 Nm
Operating and display elements - EIB push button and red LED For assigning the physical EIB adress
- DALI-Test button For checking the DALI outputs
- Green LED For displaying power on
- Yellow LED For displaying DALI fault, constant light
For displaying test mode, slow fl ashing
For displaying initialisation, fast fl ashing
Type of protection - IP 20 In accordance with DIN EN 60529
Protection class - II In accordance with DIN EN 61140
Insulation category - Overvoltage category III in accordance with DIN EN 60664-1
- Degree of pollution 2 in accordance with DIN EN 60664-1
EIB / KNX safety extra-low voltage - SELV 24 V DC In acc. to IEC60929/62386
Typical DALI voltage - 16 V DC (9.5 . 22.5 V DC) In acc. to IEC60929/62386
Temperature range - Operation - 5 °C . + 45 °C
- Storage - 25 °C . + 55 °C
- Transport - 25 °C . + 70 °C
Design - DIN rail mounted device Modular installation device, proM
- Dimensions 90 x 72 x 64 mm (H x W x D)
- Mounting width 6 modules at 18 mm
- Mounting depth 68 mm
Installation - on 35 mm mounting rail DIN EN 60 715
Mounting position - As required
Weight - 0.190 kg
Housing, colour - Plastic, grey
Certifi cation - EIB / KNX in accordance with EN 50 090-1, -2 Certifi cate
CE mark - In accordance with the EMC and low voltage guideline
5689
DG/S 1.1 DALI GATEWAY, 1-FOLD, MDRC DG/S 1.1, GATEWAYS
5702 JA/S 4.SMI.1M Shutter Actuator with Manual Operation 4-fold, SMI, MDRC ACTUATORS - OUTPUTS
The Shutter Actuator JA/S 4.SMI.1M controls four independent groups, each with up to 4 SMI shutter or roller blind drives via the EIB / KNX.

The operating buttons on the device can be used to manually raise and lower the shutter/blind as well as to stop it and adjust it in stages.

The operating state, information concerning the respective channels as well as the current direction of motion or position of the shutter/blind are displayed via LEDs.

The Shutter Actuator is a rail-mounted device for insertion in the distribution board.

The connection to the ABB i-bus® EIB / KNX is established via a terminal.

Technical data
Power supply Operating voltage 230 V AC +10/-15%, 45 ... 65 Hz
Bus voltage 21 .30 V DC via EIB / KNX
Current consumption EIB / KNX < 12 mA
Power consumption EIB / KNX Max. 250 mW
Power consumption 230 V AC Max. 2 W
Leakage loss Max. 1.8 W
Outputs 4 independent SMI outputs for up to 4 SMI
drives each
SMI control voltage 18 V DC
SMI cable lengths Max. 350 m
Operating and display elements Red LED and button For assignment of the physical address
Manual operation 2 buttons per output for up and down
(long operation) or stop/louvre
adjustment (short operation)
Display direction of motion /
end positions / status
2 LEDs per output for up / down, top /
bottom, SMI communication, alarm
Mode 1 button for switchover between
manual operation and operation
via EIB / KNX
Operating mode display 1 LED for indication of the operating
mode (manual operation / EIB / KNX)
Connections EIB / KNX Bus connection terminal (black/red)
SMI 2 screw terminals per output (I+; I-)
Conductor cross-section:
stranded: 0.2 ... 2.5 mm2
single-core: 0.2 ... 4 mm2
230 V AC power supply 2 screw terminals for L
2 screw terminals for N
Conductor cross-section:
stranded: 0.2 ... 2.5 mm2
single-core: 0.2 ... 4 mm2
Enclosure IP 20, EN 60 529
Ambient temperature range Operation - 5° C ... + 45° C
Storage - 25° C ... + 55° C
Transport - 25° C ... + 70° C
5702
JA/S 4.SMI.1M SHUTTER ACTUATOR WITH MANUAL OPERATION 4-FOLD, SMI, MDRC ACTUATORS - OUTPUTS
5729 US/U 12.2 US/U12.2 Universal Interface, 12-fold, FM INPUTS
Univerzalno sučelje ima 12 kanala koji mogu biti ulazi ili izlazi.Konvencionalni tasteri na pritiskanje i LED npr. zaslona i kontrolnog prozora, mogu biti povezani.Spojni kablovi mogu biti produženi do 10 m. Napon skeniranja kontakata i opskrbe za LED su na raspolaganju od strane uređaja.
5729
US/U 12.2 US/U12.2 UNIVERSAL INTERFACE, 12-FOLD, FM INPUTS
5739 ABL/S 2.1 Application Unit Logic CONTROLLERS
The Application Unit Logic is a rail mounted device for insertion in the distribution board.

The device contains logical function with the possibility of individual parameter parameterisation.

Furthermore, timers with on and off delays and pulse duration, staircase lighting functions and comparators are available.

The device is ready for operation after connection to the bus voltage.

The Application Logic Unit is parameterised via the ETS3. The connection to the bus is established using the front side bus
connection terminal.

Technical data
Power supply - Bus voltage
- Current consumption, bus
- Leakage loss, bus
21 . 32 V DC
< 12 mA
Max. 250 mW
Connections - EIB / KNX via bus connection terminals
Operating and display elements - Programming LED
- Programming button
for assignment of the physical address
for assignment of the physical address
Enclosure - IP 20 to DIN EN 60 529
Safety class - II to DIN EN 61 140
Isolation category Overvoltage category
Pollution degree
III to DIN EN 60 664-1
2 to DIN EN 60 664-1
EIB / KNX safety extra low voltage SELV 24 V DC
Temperature range - Operation
- Storage
- Transport
- 5°C . + 45°C
- 25°C . + 55°C
- 25°C . + 70°C
Ambient conditions - Maximum air humidity 93 %, no condensation allowed
Design - Modular installation device (MDRC)
- Dimensions
- Mounting width in space units
- Mounting depth
Modular installation device, ProM
90 x 36 x 64.5 mm (H x W x D)
2, 2 modules at 18 mm
64.5 mm
Installation - On 35 mm mounting rail to DIN EN 60 715
Mounting position - as required
Weight - 0.1 kg
Housing/colour - Plastic housing, grey
Approvals - EIB / KNX to EN 50 090-1, -2 Certification
CE mark - in accordance with the EMC guideline
and low voltage guideline
5739
ABL/S 2.1 APPLICATION UNIT LOGIC CONTROLLERS
6166 ZS/S 1.1 KNX Meter Interface Module, REG for ABB energy meters types DELTAplus, DELTAsingle, ODIN or ODINsingle SMART METERING
Meter Interface Module, MDRC Receives measuring data and values from ABB energy meters such as DELTAplus, DELTAsingle, ODIN and ODINsingle and transforms them into KNX telegrams. These data can be used e.g. for visualisation, energy optimizing, billing and monitoring purposes.
6166
ZS/S 1.1 KNX METER INTERFACE MODULE, REG FOR ABB ENERGY METERS TYPES DELTAPLUS, DELTASINGLE, ODIN OR ODINSINGLE SMART METERING
7694 IPR/S 2.1 IP Router, MDRC GATEWAYS
The IP Router IPR/S 2.1 connects the KNX bus with the Ethernet network. KNX telegrams can be sent to or received from other devices via the network. The device uses the KNXnet/IP protocol from the KNX Association for communication. This is not compatible with the EIBlib/IP protocol as used for example, by the IP Gateway IG/S 1.1. In older documents and in the ETS 3.0e the KNXnet/IP protocol is also referred to as the EIBnet/IP protocol. Both protocols and specifications are identical. The IP Router in addition to the tunnelling function for point-to-point communication, also incorporates the functions of a line coupler (routing). The IP Router can thus distribute telegrams in the network to other lines or areas, as well as receive telegrams from there.
7694
IPR/S 2.1 IP ROUTER, MDRC GATEWAYS
7700 SD/S 2.16.1 Switch-/Dim Actuator, 2-fold, 16A, MDRC ACTUATORS - OUTPUTS
Switch-/Dim Actuator, 2-fold, 16A, MDRC

MDRC Device for switching (16A-AC1) and dimming of 2 independent groups of luminaries with elect. Ballasts and 1-10V control inputs, via the ABB i-bus®. Manual and visual operation. A power supply is not necessary.
7700
SD/S 2.16.1 SWITCH-/DIM ACTUATOR, 2-FOLD, 16A, MDRC ACTUATORS - OUTPUTS
7701 SD/S 4.16.1 Switch-/Dim Actuator, 4-fold, 16A, MDRC ACTUATORS - OUTPUTS

MDRC Device for switching (16A-AC1) and dimming of 4 independent groups of luminaries with elect. Ballasts and 1-10V control inputs, via the ABB i-bus®. Manual and visual operation. A power supply is not necessary.
7701
SD/S 4.16.1 SWITCH-/DIM ACTUATOR, 4-FOLD, 16A, MDRC ACTUATORS - OUTPUTS
7704 BDB/S 1.1 Data Logging Unit, MDRC SYSTEM DEVICES
Data Logging Unit, MDRC

The Data Logging Unit BDB/S 1.1 is used for recording of switching operations and hours on 35 channels. Limit values can also be set and signals can be sent on the bus when these limit values are excee.
7704
BDB/S 1.1 DATA LOGGING UNIT, MDRC SYSTEM DEVICES
7705 SD/S 8.16.1 Switch-/Dim Actuator, 8-fold, 16A, MDRC ACTUATORS - OUTPUTS

Switch-/Dim Actuator, 8-fold, 16A, MDRC

MDRC Device for switching (16A-AC1) and dimming of 8 independent groups of luminaries with elect. Ballasts and 1-10V control inputs, via the ABB i-bus®. Manual and visual operation. A power supply is not necessary.

7705
SD/S 8.16.1 SWITCH-/DIM ACTUATOR, 8-FOLD, 16A, MDRC ACTUATORS - OUTPUTS
7706 UK/S 32.2 UK/S32.2 Universal I/O-Concentrator,32-fold,MDRC INPUTS
Universal I/O Concentrator, 32-fold, MDRC

To connect push buttons or signal lamps to the ABB i-bus®, e.g., in an operating/display tableau. It has 32 channels which can be freely parameterised as inputs/outputs using the ETS software. Requires an external 12/24 V DC auxiliary power supply.
7706
UK/S 32.2 UK/S32.2 UNIVERSAL I/O-CONCENTRATOR,32-FOLD,MDRC INPUTS
7708 UD/S 2.300.2 Universal Dim Actuator, 2-fold, 300VA, MDRC ACTUATORS - OUTPUTS

For switching and dimming incandescent lamps, 230 V halogen lamps or low-voltage halogen lamps powered by wound or electronic transformers. Automatic load detection. Full output power up to 45 °C ambient temperature.
7708
UD/S 2.300.2 UNIVERSAL DIM ACTUATOR, 2-FOLD, 300VA, MDRC ACTUATORS - OUTPUTS
7712 STD-420 E Universal Dimmer, 420 VA, ACTUATORS - OUTPUTS
Universal Dimmer, MDRC Universal dimmer with light-value memory and minimum brightness memory, soft off function and with intelligence for universal operation. Capacity expansion via output-side, parallel-connectable load lines with power module (max. 6 pcs. = 3000 W/VA total wattage). For incandescent lamps, tungsten-halogen lamps and low-voltage halogen lamps with conventional transformers or electronic transformers. Low-noise, short-circuit-proof, overload-proof
7712
STD-420 E UNIVERSAL DIMMER, 420 VA, ACTUATORS - OUTPUTS
7724 ST LABEL CARRIER OTHER ACCESSORIES
Comprising of transparent label carriers and slide-in, labelled or unlabelled paper designation plates. Can be used for switches, push buttons, indicator lamps, remote control switches, wiring relays as well as miniature circuit breakers, residual current operated circuit breakers and ABB i-bus® components.
7724
ST LABEL CARRIER OTHER ACCESSORIES
8397 AE/A 2.1 Analogue Input, 2fold, SM INPUTS
Analogue Input, 2fold, SM Used for detecting and processing of 2 indep. analogue input signals. Among other things 0-1 V, 0-5 V, 0-10 V, 1-10 V, 0-20 mA, 4-20 mA, 0-1000 Ohm, PT100, PT1000, floating contacts, KT, KTY and user-defined
8397
AE/A 2.1 ANALOGUE INPUT, 2FOLD, SM INPUTS
8533 LR/S 2.16.1 Light Controller, 2-fold, 1-10V, MDRC ACTUATORS - OUTPUTS
Device for switching and dimming two independent groups of luminaries with electronic ballasts (0 – 10 V control input). When combined with the light sensor LF/U 2.1 the device can be used as a 2-fold light controller for constant light control.

8533
LR/S 2.16.1 LIGHT CONTROLLER, 2-FOLD, 1-10V, MDRC ACTUATORS - OUTPUTS
8534 LR/S 4.16.1 Light Controller, 4-fold, 1-10V, MDRC ACTUATORS - OUTPUTS
Device for switching and dimming four independent groups of luminaries with electronic ballasts (0 - 10 V control input). When combined with the light sensor LF/U 2.1 the device can be used as a 4-fold light controller for constant lightcontrol.
8534
LR/S 4.16.1 LIGHT CONTROLLER, 4-FOLD, 1-10V, MDRC ACTUATORS - OUTPUTS
8559 NTI/Z 28.30.1 Commissioning Power Supply SYSTEM DEVICES
The device is used for on site commissioning of KNX devices should KNX system voltage be unavailable. The most important functions of a KNX device with manual operation can be tested.
8559
NTI/Z 28.30.1 COMMISSIONING POWER SUPPLY SYSTEM DEVICES
9053 RM/S 1.1 Room Master Basic, MDRC ACTUATORS - OUTPUTS
The Room Master Basic is a modular installation device (MDRC) in ProM design.

It is intended for installation in the distribution board on 35 mm mounting rails.

The assignment of the physical address as well as the para meter settings is carried out with ETS 2 from
version V1.3a or higher.

The device is powered via the ABB i-bus® and does not require and additional auxiliary voltage supply.

The RM/S 1.1 is operational after connection of the bus voltage.


Hotels, hospitals, student residences, assisted living facilities, apartments and many more – the Room Master opens up new possibilities for properties in the residential and hotel sectors.

The Room Master was developed for all rooms of this type. It covers all the electrical installation requirements for this application and offers the following functions in a compact unit:
* Light switching
* Heating/air-conditioning control
* Shading (via blinds or curtains)
* Switching of socket outlets and consumers

In addition to these basic functions, further automation functions can be realised by combining the system with a presence detector. The communication of the devices via the KNX bus also enables central control functions and allows emergency
signals to be sent from the rooms to a central control station.

Connection to a hotel management system enables the rooms to be managed and prepared efficiently.

For instance, when a guest checks out, the room can automatically be set to stand-by operation.
9053
RM/S 1.1 ROOM MASTER BASIC, MDRC ACTUATORS - OUTPUTS
9054 RM/S 2.1 Room Master Premium, MDRC ACTUATORS - OUTPUTS
The Room Master Premium is a modular installation device (MDRC) in ProM design. It is intended for installation
in the distribution board on 35 mm mounting rails.

The assignment of the physical address as well as the parameter settings is carried out with ETS 2
from version V1.3a or higher.

The device is powered via the ABB i-bus® and does not require and additional auxiliary voltage supply.

The RM/S 2.1 is operational after connection of the bus voltage.


Hotels, hospitals, student residences, assisted living facilities, apartments and many more - the Room Master opens up new possibilities for properties in the residential and hotel sectors.

The Room Master was developed for all rooms of this type. It covers all the electrical installation requirements for this application and offers the following functions in a compact unit:
* Light switching
* Heating/air-conditioning control
* Shading (via blinds or curtains)
* Switching of socket outlets and consumers

In addition to these basic functions, further automation functions can be realised by combining the system with a presence detector. The communication of the devices via the KNX bus also enables central control functions and allows emergency
signals to be sent from the rooms to a central control station.

Connection to a hotel management system enables the rooms to be managed and prepared efficiently.

For instance, when a guest checks out, the room can automatically be set to stand-by operation.
9054
RM/S 2.1 ROOM MASTER PREMIUM, MDRC ACTUATORS - OUTPUTS
9090 DG/S 1.16.1 DALI Gateway, 16 Groups GATEWAYS
The ABB i-bus® group-oriented DALI Gateway, DG/S 1.16.1 is a KNX modular installation device (MDRC) in ProM
design for installation in the distribution board on 35 mm mounting rails.

A DALI Gateway can integrate devices with DALI interfaces in a KNX building installation with the application program Switch Dim Group 1f. The connection to the ABB i-bus® is implemented via a bus connection terminal on the device shoulders.

Up to 64 DALI devices can be connected to the DALI output of the gateway.

The 64 possible DALI devices can be divided into 16 lighting groups on the KNX with an ETS independent commissioning tool.

With the tool it is possible, if required, to implement individual project-related DALI addressing whereby every individual one of the 64 devices can be flexibly addressed.

The fault status (lamps and ballasts) of each individual DALI device can be sent via different KNX objects on the
KNX.

The control of the 64 devices is implemented exclusively via the lighting groups.

A device can be contained in several lighting groups.

A staircase lighting and sequencer function is integrated into the DG/S 1.16.1.

The 16 lighting groups can also be integrated into any scene and called or stored using a 1 bit or 8 bit scene
telegram via the KNX.

With the central commands (broadcast) all the DALI devices connected to the DALI output can be commonly controlled via the KNX.

The DALI gateway DG/S 1.16.1 is a DALI control device (master) and requires an AC or DC auxiliary supply. No separate DALI voltage supply is required. The DALI power source for 64 DALI devices is integrated into the gateway. As soon as the auxiliary supply is connected, the gateway can commonly manually switch on or off all connected DALI devices independently of the KNX or DALI addressing.
9090
DG/S 1.16.1 DALI GATEWAY, 16 GROUPS GATEWAYS
9136 XS/S 1.1 INTERFACE TO ALARM MODULE L240 ALARMS CENTRAL
Die Schnittstelle zur Einbruchmelderzentrale XS/S 1.1 bindet die ABB-Einbruchmeldetechnik in das KNX Bussystem ein. Die Schnittstelle erlaubt die bidirektionale Kommunikation zwischen dem KNX und dem Einbruchmeldesystem L240. Jeder einzelne Eingang der 80 Meldergruppeneingänge der L240 kann somit wahlweise einem „konventio-nellen“ Melder an der L240 oder einem KNX-Melder am KNX-Bussystem zugeordnet werden. Nur eine Richtung pro Meldergruppe ist möglich! Das Gerät wird auf einer DIN-Hutschiene montiert. Die Montage kann im Zentralgehäuse erfolgen.
9136
XS/S 1.1 INTERFACE TO ALARM MODULE L240 ALARMS CENTRAL
9893 SE/S 3.16.1 Energy Actuator, 3-fold, 16/20A, MDRC ACTUATORS - OUTPUTS
The Energy Actuator is a modular installation device in Pro M design for installation in the distribution board. The device is especially suitable for switching loads with high peak inrush currents such as lighting equipment with compensation capacitors or fluorescent lamp loads (AX) to EN 60 669. Manual operation is possible on the device. This simultaneously indicates the switching state. The Energy Actuator can switch up to 3 independent electrical loads via floating contacts. The maximum load current per output is 20 A. The connection of the outputs is implemented using universal head screw terminals. Each output is controlled separately via the KNX. Individual outputs can be copied or exchanged to reduce the programming effort. The parameterization is undertaken via the ETS. The connection to the KNX is implemented using the bus connection terminal on the front.
9893
SE/S 3.16.1 ENERGY ACTUATOR, 3-FOLD, 16/20A, MDRC ACTUATORS - OUTPUTS
10061 ES/S 4.1.2.1 ELECTRONIC SWITCH ACTUATOR. 4 GANG, REG CLIMATE CONTROL
Electronic Switch Actuator, 4-fold, 1 A, MDRC

For controlling thermoelectric and motor-driven valve drives in heating/cooling systems and for noiseless switching of loads at 24...230 V AC/DC. The 4 semicondcutor outputs are protected against short circuits and overload.With manual operation.
10061
ES/S 4.1.2.1 ELECTRONIC SWITCH ACTUATOR. 4 GANG, REG CLIMATE CONTROL
10168 RDF/A 1.1 Room Thermostat Fan Coil with Display CLIMATE CONTROL
Control element for ambient temperature control with LCD and 5 operating buttons Used for single-room temperature control in heating and air-conditioning technology. The controller is a constant ambient temperature controller for fan convectors (fan coils)


The Fan Coil ambient temperature controller with display is a continuous KNX ambient temperature controller for fan convectors in 2 and 4-pipe systems. It measures the current ambient temperature (actual value) and sends a continuous manipulated variable (0 - 100%) to a fan coil actuator to maintain the desired ambient temperature. The device operates in both heating and cooling mode.

Hotel management systems can directly access the Fan Coil ambient temperature controller with display via KNX and trigger controllers in the room. The fan speed can also be selected manually with buttons (forced operation). This makes it possible to adjust the hotel room temperature as required by the customer or guest.
The device can be linked to the functions of the RM/S master room controller and FCA/S fan coil actuator via the KNX.
10168
RDF/A 1.1 ROOM THERMOSTAT FAN COIL WITH DISPLAY CLIMATE CONTROL
10260 MT/S 4.12.2M Security Terminal, 4-fold, MDRC ALARMS CENTRAL
Compact KNX security solution for the detection of intrusions and technical alarms. The device provides 4 monitored inputs and 3 relay outputs. A 12 V DC SELV auxiliary voltage is necessary.
10260
MT/S 4.12.2M SECURITY TERMINAL, 4-FOLD, MDRC ALARMS CENTRAL
10261 NTU/S 12.2000.1 Uninterrupted Power supply 12V 2A DIN SYSTEM DEVICES
The Uninterruptible Power Supply Unit NTU/S 12.2000.1 is a modular installation device in ProM-Design, for snapon mounting on a 35 mm mounting rail in a universal, wall-mounted or ceiling panel distribution board as well as in distributed surface mounted housings. The power supply delivers sufficient power for all types of demanding applications with a buffered output voltage of 12 V DC and a maximum output current of 2 A.
10261
NTU/S 12.2000.1 UNINTERRUPTED POWER SUPPLY 12V 2A DIN SYSTEM DEVICES
10263 FC600/BREL Relay Base SIN FAMILIA
FC600/BREL Relay Base 12/24 V DC for connecting detectors from series FC600 to Intrusion alarm panels an KNX-Security-Components
10263
FC600/BREL RELAY BASE SIN FAMILIA
10288 BE/S 8.20.2.1 Binary Input, 8-fold, contact scanning, MDRC BE/S8.20.1 INPUTS
The 8-fold Binary Input BE/S 8.20.1 with manual operation is a rail mounted device for insertion in the distribution board. The device is suitable for reading out of floating contacts. The pulsed polling voltage is generated internally. Buttons on the front of the device can be used to simulate the input state. The status of the inputs are displayed by yellow LEDs. The device is ready for operation after connection to the bus voltage. The Binary Input is parameterised via ETS2 V1.3a or higher. The connection to the bus is established using the front side bus connection terminal.
10288
BE/S 8.20.2.1 BINARY INPUT, 8-FOLD, CONTACT SCANNING, MDRC BE/S8.20.1 INPUTS
10360 BE/S 4.230.2.1 Binary Input WITH MANUAL OPERATION, 4-fold, 10-230 V, MDRC INPUTS
The 4-fold Binary Input BE/S 4.230.2.1 with manual operation is a modular installation device for installation in distribution boards. The device is suitable for detection of 10…230 V AC/DC signals. Inputs A and B are independent of the inputs C and D. Buttons for manual operation, which can be used to simulate the input state are located on the front. The current status of the inputs is indicated via yellow LEDs. The device is ready for operation after connecting the bus voltage. The Binary Input is parameterized via ETS. The connection to the KNX is implemented using the bus connection terminal on the front.
10360
BE/S 4.230.2.1 BINARY INPUT WITH MANUAL OPERATION, 4-FOLD, 10-230 V, MDRC INPUTS
10361 BE/S 8.230.2.1 Binary Input with manual operation, 8-fold, 230 AC/DC INPUTS
The 8-fold Binary Input BE/S 8.230.2.1 with manual operation is a modular installation device for installation in distribution boards. The device is suitable for detection of 10…230 V AC/DC signals. Buttons for manual operation, which can be used to simulate the input state are located on the front. The current status of the inputs is indicated via yellow LEDs. The device is ready for operation after connecting the bus voltage. The Binary Input is parameterized via ETS. The connection to the KNX is implemented using the bus connection terminal on the front.
10361
BE/S 8.230.2.1 BINARY INPUT WITH MANUAL OPERATION, 8-FOLD, 230 AC/DC INPUTS
10362 SA/S 8.16.6.1 Switch Actuator, 8-fold, 16 A, C-Load, Current Detection, MDRC ACTUATORS - OUTPUTS
Uses potential free contacts to switch 8 independent electrical loads via the ABB i-bus®. Load current detection, manual and visual operation. The 16/20AX (C-load) device is especially suited for loads with high surge currents e.g. flourescent lighting.
10362
SA/S 8.16.6.1 SWITCH ACTUATOR, 8-FOLD, 16 A, C-LOAD, CURRENT DETECTION, MDRC ACTUATORS - OUTPUTS
10363 SA/S 2.16.6.1 Switch Actuator, 2-fold, 16 A, C-Load, Current Detection, MDRC ACTUATORS - OUTPUTS
Uses potential free contacts to switch 2 independent electrical loads via the ABB i-bus®. Load current detection, manual and visual operation. The 16/20AX (C-load) device is especially suited for loads with high surge currents e.g. flourescent lighting.
10363
SA/S 2.16.6.1 SWITCH ACTUATOR, 2-FOLD, 16 A, C-LOAD, CURRENT DETECTION, MDRC ACTUATORS - OUTPUTS
10364 SA/S 4.16.6.1 Switch Actuator, 4-fold, 16 A, C-Load, Current Detection, MDRC ACTUATORS - OUTPUTS
Uses potential free contacts to switch 4 independent electrical loads via the ABB i-bus®. Load current detection, manual and visual operation. The 16/20AX (C-load) device is especially suited for loads with high surge currents e.g. flourescent lighting.
10364
SA/S 4.16.6.1 SWITCH ACTUATOR, 4-FOLD, 16 A, C-LOAD, CURRENT DETECTION, MDRC ACTUATORS - OUTPUTS
10365 BE/S 4.20.2.1 Binary Input, 4-fold, Contact Scanning, MDRC INPUTS
The device interrogates 4 floating contacts using an internally generated scanning voltage. State inputs via 4 LEDs. Max. 4 signals (in 2 groups) are detectable. Each channel one push button for manual operation.
10365
BE/S 4.20.2.1 BINARY INPUT, 4-FOLD, CONTACT SCANNING, MDRC INPUTS
10366 LGS/A 1.1 Air Quality Sensor, SM SENSORS
The Air Quality Sensor (CO2 sensor) accurately measures the CO2 concentration, humidity and temperature in a room. Three independent thresholds can be set for the CO2 concentration and the relative humidity in addition to a thresld for the temperature

10366
LGS/A 1.1 AIR QUALITY SENSOR, SM SENSORS
10384 MT/U 2.12.2 Security Terminal, 2-fold, FM INPUTS
For the monitored connection of passive detectors, e.g., magnetic contacts or glass-breakage sensors of other floating contacts in applications with increased security requirements. 2 groups of detectors (``zones``). 12 V DC power supply required.
10384
MT/U 2.12.2 SECURITY TERMINAL, 2-FOLD, FM INPUTS
10438 SA/S 12.16.6.1 Switch Actuator with Current Detection, 12-fold, 16/20 AX, C-Load, MDRC ACTUATORS - OUTPUTS
Uses potential free contacts to switch 12 independent electrical loads via the ABB i-bus®. Load current detection, manual and visual operation. The 16/20AX (C-load) device is especially suited for loads with high surge currents.
10438
SA/S 12.16.6.1 SWITCH ACTUATOR WITH CURRENT DETECTION, 12-FOLD, 16/20 AX, C-LOAD, MDRC ACTUATORS - OUTPUTS
10503 RC/A 8.2 Room Controller, Basis Device for 8 Modules, SM ACTUATORS - OUTPUTS
Accommodates up to 8 plug-in modules. It controls their function and communicates as one bus device via the ABB i-bus®. Any module type can be plugged into each module slot. Manual operation for functional tests.
10503
RC/A 8.2 ROOM CONTROLLER, BASIS DEVICE FOR 8 MODULES, SM ACTUATORS - OUTPUTS
10506 RC/A 4.2 Room Controller, Basis Device for 4 Modules ACTUATORS - OUTPUTS
Accommodates up to 4 plug-in modules. It controls their function and communicates as one bus device via the ABB i-bus®. Any module type can be plugged into each module slot. Manual operation for functional tests.
10506
RC/A 4.2 ROOM CONTROLLER, BASIS DEVICE FOR 4 MODULES ACTUATORS - OUTPUTS
10510 DLR/S 8.16.1M DALI Light Controller, 8-fold, MDRC GATEWAYS
Device for switching and dimming of 16 independent groups of luminaries. Up to 64 DALI members can be connected. When combined with the light sensor LF/U 2.1 the device can be used as a 8-fold light controller for constant light control.
10510
DLR/S 8.16.1M DALI LIGHT CONTROLLER, 8-FOLD, MDRC GATEWAYS
10511 VAA/A 6.24.1 Valve Drive Actuator, 24 V, 6-fold, SM CLIMATE CONTROL

 

10511
VAA/A 6.24.1 VALVE DRIVE ACTUATOR, 24 V, 6-FOLD, SM CLIMATE CONTROL
10861 MT/S 8.12.2M Security Terminal, 8-fold, MDRC ALARMS CENTRAL

The Security Termial MT/S 8.12.2M is used for the monitored connection of sensors from security technology (e.g. magnetic contacts or glass-breakage sensors) to the ABB i-bus® KNX. The device has eight inputs (”zones“) available and can be used as a stand-alone security system or in combination with the security module or alarm system with KNX interface.

12 V DC SELV power supply required, e.g. NTU/S 12.2000.1.

Typical applications are door and window surveillance, glas-breakage detection as well as area surveillance.

Functionality of the application program:

- 12 V DC auxiliary power supply surveillance

- Direct and delayed setting/unsetting

- Internally (presence) and externally (absence) setting/unsetting

- Zone inputs (Intrusion detectors for internal and peripheral protection, panic-, technical alarm-, lock monitoring detector and tamper contact)

- Reset and setting device input

- Zone surveillance (closed- and opened circuit, end of line resistor, tamper alarm setting device)

- Switching off zones

- Alarming types (intrusion-, panic-, tamper- and technical alarm)

- free programmable relay outputs

Inputs 8 zones Outputs 2 relay outputs, internally supplied with 12 V DC, max. short circuit current at 0,6 A 1 potential-free relay output 12…24 V DC,max. short circuit current at 0,6 A Display 1 LED per zone, output, manual operation and set/unset status

Manual operation 1 key per output, reset and manual operation

Auxiliary power supply 12 V DC SELV auxiliary power supply required

Connection Screw terminals

KNX Bus screw terminal

Protection IP 20 to EN 60 529

Installation on 35 mm DIN rail, DIN EN 50 022

10861
MT/S 8.12.2M SECURITY TERMINAL, 8-FOLD, MDRC ALARMS CENTRAL
10974 SA/S 2.16.5.1 Switch Actuator, 2-fold, 16/20 AX, C-Load, MDRC ACTUATORS - OUTPUTS
Uses potential free contacts to switch 2 independent electrical loads via the ABB i-bus®. Manual and visual operation. The 16/20AX (C-load) device is especially suited for loads with high surge currents.
10974
SA/S 2.16.5.1 SWITCH ACTUATOR, 2-FOLD, 16/20 AX, C-LOAD, MDRC ACTUATORS - OUTPUTS
10975 SA/S 4.16.5.1 Switch Actuator, 4-fold, 16/20 AX, C-Load, MDRC ACTUATORS - OUTPUTS
Uses potential free contacts to switch 4 independent electrical loads via the ABB i-bus®. Manual and visual operation. The 16/20AX (C-load) device is especially suited for loads with high surge currents.
10975
SA/S 4.16.5.1 SWITCH ACTUATOR, 4-FOLD, 16/20 AX, C-LOAD, MDRC ACTUATORS - OUTPUTS
10976 SA/S 8.16.5.1 Switch Actuator, 8-fold, 16/20 AX, C-Load, MDRC ACTUATORS - OUTPUTS
Uses potential free contacts to switch 8 independent electrical loads via the ABB i-bus®. Manual and visual operation. The 16/20AX (C-load) device is especially suited for loads with high surge currents.
10976
SA/S 8.16.5.1 SWITCH ACTUATOR, 8-FOLD, 16/20 AX, C-LOAD, MDRC ACTUATORS - OUTPUTS
10977 SA/S 12.16.5.1 Switch Actuator, 12-fold, 16/20 AX, C-Load, MDRC ACTUATORS - OUTPUTS
Uses potential free contacts to switch 12 independent electrical loads via the ABB i-bus®. Manual and visual operation. The 16/20AX (C-load) device is especially suited for loads with high surge currents.
10977
SA/S 12.16.5.1 SWITCH ACTUATOR, 12-FOLD, 16/20 AX, C-LOAD, MDRC ACTUATORS - OUTPUTS
10978 JRA/S 2.230.5.1 Blind/Roller Shutter Actuator with Travel Detection and Manual Operation, 2-fold, 230 V AC, MDRC ACTUATORS - OUTPUTS
Controls 2 independent groups each with 2 blind-, roller shutter drives or ventilation flaps. With automatic travel detection and manual operation. No auxiliary voltage needed. Outputs are mechanically interlocked.
10978
JRA/S 2.230.5.1 BLIND/ROLLER SHUTTER ACTUATOR WITH TRAVEL DETECTION AND MANUAL OPERATION, 2-FOLD, 230 V AC, MDRC ACTUATORS - OUTPUTS
10979 JRA/S 4.230.5.1 Blind/Roller Shutter Actuator with Travel Detection and Manual Operation, 4-fold, 230 V AC, MDRC ACTUATORS - OUTPUTS
Controls 4 independent groups each with 4 blind-, roller shutter drives or ventilation flaps. With automatic travel detection and manual operation. No auxiliary voltage needed. Outputs are mechanically interlocked.
10979
JRA/S 4.230.5.1 BLIND/ROLLER SHUTTER ACTUATOR WITH TRAVEL DETECTION AND MANUAL OPERATION, 4-FOLD, 230 V AC, MDRC ACTUATORS - OUTPUTS
10980 JRA/S 8.230.5.1 Blind/Roller Shutter Actuator with Travel Detection and Manual Operation, 8-fold, 230 V AC, MDRC ACTUATORS - OUTPUTS
Controls 8 independent groups each with 8 blind-, roller shutter drives or ventilation flaps. With automatic travel detection and manual operation. No auxiliary voltage needed. Outputs are mechanically interlocked.
10980
JRA/S 8.230.5.1 BLIND/ROLLER SHUTTER ACTUATOR WITH TRAVEL DETECTION AND MANUAL OPERATION, 8-FOLD, 230 V AC, MDRC ACTUATORS - OUTPUTS
11033 SBB/U 4.1.1 Touch sensor for bus system 4-fold - SBB/U4.1.1 PUSH BUTTONS

Control unit, bundle, design Solo®
Control elements Single, double or quadruple with a suitable bus coupler (in the bundle), for sending switching commands via ABB i-bus® KNX. Each rocker has two LEDs that indicate the status of the switched loads. The individual rockers are freely programmable and are suitable for switching and dimming as well as for the operation of blinds and as a lighting scene. The anti-theft protection is integrated. Design: solo®; Color: studioweiß

11033
SBB/U 4.1.1 TOUCH SENSOR FOR BUS SYSTEM 4-FOLD - SBB/U4.1.1 PUSH BUTTONS
11043 JRA/S 4.24.5.1 Blind/Roller Shutter Actuator with Travel Detection and Manual Operation, 4-fold, 24 V DC, MDRC ACTUATORS - OUTPUTS
Controls 8 independent 24 V DC blind-, roller shutter drives or ventilation flaps. With automatic travel detection and manual operation. No auxiliary voltage needed.
11043
JRA/S 4.24.5.1 BLIND/ROLLER SHUTTER ACTUATOR WITH TRAVEL DETECTION AND MANUAL OPERATION, 4-FOLD, 24 V DC, MDRC ACTUATORS - OUTPUTS
11044 JRA/S 2.230.2.1 Blind/Roller Shutter Actuator with Manual Operation, 2-fold, 230 V AC, MDRC ACTUATORS - OUTPUTS
Controls 2 independent groups each with 2 blind-, roller shutter drives or ventilation flaps. With manual operation. No auxiliary voltage needed. Outputs are mechanically interlocked
11044
JRA/S 2.230.2.1 BLIND/ROLLER SHUTTER ACTUATOR WITH MANUAL OPERATION, 2-FOLD, 230 V AC, MDRC ACTUATORS - OUTPUTS
11045 JRA/S 4.230.2.1 Blind/Roller Shutter Actuator with Manual Operation, 4-fold, 230 V AC, MDRC ACTUATORS - OUTPUTS
Controls 4 independent groups each with 4 blind-, roller shutter drives or ventilation flaps. With manual operation. No auxiliary voltage needed. Outputs are mechanically interlocked
11045
JRA/S 4.230.2.1 BLIND/ROLLER SHUTTER ACTUATOR WITH MANUAL OPERATION, 4-FOLD, 230 V AC, MDRC ACTUATORS - OUTPUTS
11046 JRA/S 8.230.2.1 Blind/Roller Shutter Actuator with Manual Operation, 8-fold, 230 V AC, MDRC ACTUATORS - OUTPUTS
Controls 8 independent groups each with 8 blind-, roller shutter drives or ventilation flaps. With manual operation. No auxiliary voltage needed. Outputs are mechanically interlocked
11046
JRA/S 8.230.2.1 BLIND/ROLLER SHUTTER ACTUATOR WITH MANUAL OPERATION, 8-FOLD, 230 V AC, MDRC ACTUATORS - OUTPUTS
11047 JRA/S 2.230.1.1 Blind/Roller Shutter Actuator, 2-fold, 230 V AC, MDRC ACTUATORS - OUTPUTS
Controls 2 independent groups each with 2 blind-, roller shutter drives or ventilation flaps. Outputs are mechanically interlocked.
11047
JRA/S 2.230.1.1 BLIND/ROLLER SHUTTER ACTUATOR, 2-FOLD, 230 V AC, MDRC ACTUATORS - OUTPUTS
11048 JRA/S 4.230.1.1 Blind/Roller Shutter Actuator, 4-fold, 230 V AC, MDRC ACTUATORS - OUTPUTS
Controls 4 independent groups each with 4 blind-, roller shutter drives or ventilation flaps. Outputs are mechanically interlocked.
11048
JRA/S 4.230.1.1 BLIND/ROLLER SHUTTER ACTUATOR, 4-FOLD, 230 V AC, MDRC ACTUATORS - OUTPUTS
11049 JRA/S 8.230.1.1 Blind/Roller Shutter Actuator, 8-fold, 230 V AC, MDRC ACTUATORS - OUTPUTS
Controls 8 independent groups each with 8 blind-, roller shutter drives or ventilation flaps. Outputs are mechanically interlocked.
11049
JRA/S 8.230.1.1 BLIND/ROLLER SHUTTER ACTUATOR, 8-FOLD, 230 V AC, MDRC ACTUATORS - OUTPUTS
11050 DGN/S 1.16.1 KNX/DALI Gateway, Emergency lighting, MDRC GATEWAYS

The KNX ABB i-bus® DALI Gateway with Emergency Lighting Function DGN/S 1.16.1 is a KNX modular installation device (MDRC) in Pro Mdesign for installation in the distribution board on 35 mm mounting rails.

The DGN/S integrates operating devices with DALI interfaces to EN 62386 into a KNX building installation. The connection to the ABB i-bus® is implemented via a KNX connection terminal on the device shoulders.

The DALI output of the DGN/S can be used to connect up to 64 DALI devices. It can also exclusively contain 64 DALI devices for self-contained emergency lighting compliant to EN 6286-202. Both “normal” lamps as well as battery operated emergency lighting can be connected in a mixed configuration to the DGN/S 1.16.1.

Control of the lamps via KNX is undertaken by 16 lighting groups, which can be comprised of any 64 DALI lamps.

An individual project-related DALI device group assignment is possible using the DALI-Software-Tool.

The fault status (lamps, ballasts or emergency light converter) of every individual DALI device or of the lighting group is sent via different KNX communication objects on the KNX.

In addition to the standard functions, e.g. switching, dimming and brightness value setting with the corresponding feedbacks, the DGN/S has the functions Staircase lighting, Scene, Sequence and Slave. The lighting groups can be integrated in this way into a constant lighting control.

Function, duration and partial duration tests and battery tests for the emergency lighting systems with individual batteries to EN 62386-202 can be triggered and stopped via KNX. The test results are made available on the KNX.

All DALI devices can be controlled together in KNX mode as well as manual mode.

The DGN/S is a DALI control device (master) and requires an AC or DC auxiliary power supply. A separate DALI power supply is not required. The DALI power source for the 64 DALI devices is integrated into the DGN/S.

11050
DGN/S 1.16.1 KNX/DALI GATEWAY, EMERGENCY LIGHTING, MDRC GATEWAYS
11054 SBB/U 1.1.1 Single button ®, Bus coupler, 1 channel, white PUSH BUTTONS

Bedienelemente 1fach, 2fach oder 4fach mit passendem Busankoppler (im Bundle), zum Senden von Schaltbefehlen uber ABB i-busR KNX. Jede Wippe verfugt uber zwei LEDs, die den Status der geschalteten Verbraucher anzeigen. Die einzelnen Wippen sind frei programmierbar und eignen sich zum Schalten und Dimmen ebenso wie fur die Bedienung von Jalousien und als Lichtszenennebenstelle.

Ein Diebstahlschutz ist integriert. Design: soloR; Farbe: studioweis

11054
SBB/U 1.1.1 SINGLE BUTTON ®, BUS COUPLER, 1 CHANNEL, WHITE PUSH BUTTONS
11055 SBB/U 2.1.1 Single button ®, Bus coupler, 2 channel, white PUSH BUTTONS

Control elements 1-gang, 2-gang or 4-gang with suitable bus coupler (in the bundle), for sending switching commands via ABB i-busR KNX. Each rocker has two LEDs which indicate the status of the switched loads. The individual rockers are freely programmable and are suitable for switching and dimming as well as for the operation of blinds and as a lighting scene.

The anti-theft protection is integrated. Design: soloR; Color: studioweis

11055
SBB/U 2.1.1 SINGLE BUTTON ®, BUS COUPLER, 2 CHANNEL, WHITE PUSH BUTTONS
11149 SJR/S 4.24.2.1 Blind and Roller Shutter Actuator 4-fold, LoVo, MDRC ACTUATORS - OUTPUTS
Controls 4 independent groups each with up to 4 SMI LoVo blind or roller shutter drives via ABB i-bus®. Allows exact positioning as well as status response of drive and hanging. With automatic control and manual operation.
11149
SJR/S 4.24.2.1 BLIND AND ROLLER SHUTTER ACTUATOR 4-FOLD, LOVO, MDRC ACTUATORS - OUTPUTS
11965 EM/S 3.16.1 Energy Module, 3-fold, 16/20 A, MDRC ACTUATORS - OUTPUTS
Measures energy consumption in the terminal current circuit. Various electrical values (Active Power, Current, Voltage, Frequency) can be monitored and peak loads can be limited through a simple load control.
11965
EM/S 3.16.1 ENERGY MODULE, 3-FOLD, 16/20 A, MDRC ACTUATORS - OUTPUTS
12112 SBI/U 3.1.1 3 channel pushbutton, IR PUSH BUTTONS
For bus coupling unit BA / U 5.2. Freely programmable multifunctional control unit. Innovative RGB LED color concept or standard lighting red / green / OFF.
Button function: switch / dimming / shutter / send value / light scenes etc.
For control by IR hand transmitters.
Control element: pushbutton contact left / right. With inscription field and theft protection.
12112
SBI/U 3.1.1 3 CHANNEL PUSHBUTTON, IR PUSH BUTTONS
12113 BA/U 5.2 Bus-coupler, BA/U 5.2 SYSTEM DEVICES
Bus coupler for bus system Bus system KNX, Mounting method Flush mounted (plaster), Width in number of modular spacings 0, Type of fastening Mounting with screw,
12113
BA/U 5.2 BUS-COUPLER, BA/U 5.2 SYSTEM DEVICES
12133 LK/S 4.2 Line Coupler LK/S 4.2 SYSTEM DEVICES
The ABB i-bus® KNX Line Coupler LK/S 4.2 is used as a line or area coupler or as a repeater. It provides electrical isolation between main line and line.
12133
LK/S 4.2 LINE COUPLER LK/S 4.2 SYSTEM DEVICES
12574 SA/S 4.6.1.1 Switch Actuator, 4-fold, 6 A ACTUATORS - OUTPUTS
Uses potential free contacts to switch 4 independent electrical loads via the ABB i-bus®. The 6A-AC3 device is especially suited to switch resistive, inductive or capacitive loads.
12574
SA/S 4.6.1.1 SWITCH ACTUATOR, 4-FOLD, 6 A ACTUATORS - OUTPUTS
12575 SA/S 8.6.1.1 Switch Actuator, 8-fold, 6 A, MDRC ACTUATORS - OUTPUTS
Uses potential free contacts to switch 8 independent electrical loads via the ABB i-bus®. Every 2 contacts have a common supply phase. The 6A-AC3 device is especially suited to switch resistive, inductive or capacitive loads.
12575
SA/S 8.6.1.1 SWITCH ACTUATOR, 8-FOLD, 6 A, MDRC ACTUATORS - OUTPUTS
12576 SA/S 12.6.1.1 Switch Actuator, 12-fold, 6 A, MDRC ACTUATORS - OUTPUTS
Uses potential free contacts to switch 12 independent electrical loads via the ABB i-bus®. Every 2 contacts have a common supply phase. The 6A-AC3 device is especially suited to switch resistive, inductive or capacitive loads.
12576
SA/S 12.6.1.1 SWITCH ACTUATOR, 12-FOLD, 6 A, MDRC ACTUATORS - OUTPUTS
12577 SA/S 2.10.2.1 Switch Actuator, 2-fold, 10 AX, MDRC ACTUATORS - OUTPUTS
Uses potential free contacts to switch 2 independent electrical loads via the ABB i-bus®. Manual and visual operation. The 10AX device is especially suited for loads with high surge currents e.g. flourescent lighting (AX) acc. EN 60669.
12577
SA/S 2.10.2.1 SWITCH ACTUATOR, 2-FOLD, 10 AX, MDRC ACTUATORS - OUTPUTS
12609 ES/S 8.1.2.1 Electronic Switch Actuator, 8-fold, 1 A, MDRC CLIMATE CONTROL
For controlling thermoelectric and motor-driven valve drives in heating/cooling systems and for noiseless switching of loads at 24...230 V AC/DC. The 8 semicondcutor outputs are protected against short circuits and overload.With manual operation.
12609
ES/S 8.1.2.1 ELECTRONIC SWITCH ACTUATOR, 8-FOLD, 1 A, MDRC CLIMATE CONTROL
12610 SA/S 4.16.2.1 Switch Actuator, 4-fold, 16 A, MDRC ACTUATORS - OUTPUTS
Uses potential free contacts to switch 4 independent electrical loads via the ABB i-bus®. Manual operation and display of the switching state of the contacts. The 16A-AC1 device is especially suited for resistive loads.
12610
SA/S 4.16.2.1 SWITCH ACTUATOR, 4-FOLD, 16 A, MDRC ACTUATORS - OUTPUTS
12717 DLR/A 4.8.1.1 DALI Light Controller, 4-fold, SM GATEWAYS
Surface mounting KNX DALI Light Controller switching and dimming of 8 groups of luminaries. Up to 64 DALI members can be connected. When combined with the light sensor LF/U 2.1 the device can be used as a 4-f light controller for constant light control.
12717
DLR/A 4.8.1.1 DALI LIGHT CONTROLLER, 4-FOLD, SM GATEWAYS
12722 SA/S 4.10.2.1 Switch Actuator, 4-fold, 10 AX, MDRC ACTUATORS - OUTPUTS
Uses potential free contacts to switch 4 independent electrical loads via the ABB i-bus®. Manual and visual operation. The 10AX-AC1 device is especially suited for loads with high surge currents e.g. flourescent lighting (AX) acc. EN 60669.
12722
SA/S 4.10.2.1 SWITCH ACTUATOR, 4-FOLD, 10 AX, MDRC ACTUATORS - OUTPUTS
12723 SA/S 8.10.2.1 Switch Actuator, 8-fold, 10 AX, MDRC ACTUATORS - OUTPUTS
Uses potential free contacts to switch 8 independent electrical loads via the ABB i-bus®. Manual and visual operation. The 10AX-AC1 device is especially suited for loads with high surge currents e.g. flourescent lighting (AX) acc. EN 60669.
12723
SA/S 8.10.2.1 SWITCH ACTUATOR, 8-FOLD, 10 AX, MDRC ACTUATORS - OUTPUTS
12724 SA/S 12.10.2.1 Switch Actuator, 12-fold, 10 AX, MDRC ACTUATORS - OUTPUTS
Uses potential free contacts to switch 12 independent electrical loads via the ABB i-bus®. Manual and visual operation. The 10AX device is especially suited for loads with high surge currents e.g. flourescent lighting (AX) acc. EN 60669.
12724
SA/S 12.10.2.1 SWITCH ACTUATOR, 12-FOLD, 10 AX, MDRC ACTUATORS - OUTPUTS
12725 SA/S 2.16.2.1 Switch Actuator, 2-fold, 16 A, MDRC ACTUATORS - OUTPUTS
Uses potential free contacts to switch 2 independent electrical loads via the ABB i-bus®. Manual operation and display of the switching state of the contacts. The 16A-AC1 device is especially suited for resistive loads.
12725
SA/S 2.16.2.1 SWITCH ACTUATOR, 2-FOLD, 16 A, MDRC ACTUATORS - OUTPUTS
12726 SA/S 8.16.2.1 Switch Actuator, 8-fold, 16 A, MDRC ACTUATORS - OUTPUTS
Uses potential free contacts to switch 8 independent electrical loads via the ABB i-bus®. Manual operation and display of the switching state of the contacts. The 16A-AC1 device is especially suited for resistive loads.
12726
SA/S 8.16.2.1 SWITCH ACTUATOR, 8-FOLD, 16 A, MDRC ACTUATORS - OUTPUTS
12727 SA/S 12.16.2.1 Switch Actuator, 12-fold, 16 A, MDRC ACTUATORS - OUTPUTS
Uses potential free contacts to switch 12 independent electrical loads via the ABB i-bus®. Manual operation and display of the switching state of the contacts. The 16A-AC1 device is especially suited for resistive loads.
12727
SA/S 12.16.2.1 SWITCH ACTUATOR, 12-FOLD, 16 A, MDRC ACTUATORS - OUTPUTS
12728 RM/S 3.1 Room Master, 12 inputs, 4 outputs and 4 shutter outputs or 8 outputs. ACTUATORS - OUTPUTS
Device to control of apartment ranges, typically in hotels and small apartments. 12 inputs, 4 outputs and 4 shutter outputs or 8 outputs.
12728
RM/S 3.1 ROOM MASTER, 12 INPUTS, 4 OUTPUTS AND 4 SHUTTER OUTPUTS OR 8 OUTPUTS. ACTUATORS - OUTPUTS
12729 IO/S 4.6.1.1 IO-Actuator, 4fold, 4 inputs, 4 outputs ACTUATORS - OUTPUTS
Device to control of apartment ranges, typically in hotels and small apartments. 4 inputs, 4 outputs
12729
IO/S 4.6.1.1 IO-ACTUATOR, 4FOLD, 4 INPUTS, 4 OUTPUTS ACTUATORS - OUTPUTS
12730 IO/S 8.6.1.1 IO-Actuator, 8 fold, 8 inputs, 8 outputs ACTUATORS - OUTPUTS
Device to control of apartment ranges, typically in hotels and small apartments. 8 inputs, 8 outputs
12730
IO/S 8.6.1.1 IO-ACTUATOR, 8 FOLD, 8 INPUTS, 8 OUTPUTS ACTUATORS - OUTPUTS
12731 RM/S 4.1 Room Master, MDRC, 8 inputs and 8 outputs. ACTUATORS - OUTPUTS
Device to control of apartment ranges, typically in hotels and small apartments. 8 inputs and 8 outputs.
12731
RM/S 4.1 ROOM MASTER, MDRC, 8 INPUTS AND 8 OUTPUTS. ACTUATORS - OUTPUTS
12732 BA/U 1.24.1 Bus coupler, 24V, UP SYSTEM DEVICES
Power-Busankoppler für priOn Grundträger 1fach, 2fach und 3fach. Separate 24V DC Spannungsversorgung (CP-D 24/2.5) erforderlich. Der KNX-Anschluss dient ausschließlich der Buskommunikation.
12732
BA/U 1.24.1 BUS COUPLER, 24V, UP SYSTEM DEVICES
12733 UD/S 4.210.2 Universal Dimmer, 4 fold, 210VA ACTUATORS - OUTPUTS
Multi-channel universal actuator for the control of incandescent lamps, 230V and low-voltage halogen lamps with conventional or electronical Transformers up to 210VA. Status / status indication of the outputs via LED. On-site operation also possible without bus voltage
12733
UD/S 4.210.2 UNIVERSAL DIMMER, 4 FOLD, 210VA ACTUATORS - OUTPUTS
12734 UD/S 4.315.2 Universal Dimmer, 4 fold, 315VA ACTUATORS - OUTPUTS
Multi-channel universal actuator for the control of incandescent lamps, 230V and low-voltage halogen lamps with conventional or electronical Transformers up to 210VA. Status / status indication of the outputs via LED. On-site operation also possible without bus voltage
12734
UD/S 4.315.2 UNIVERSAL DIMMER, 4 FOLD, 315VA ACTUATORS - OUTPUTS
12735 UD/S 6.315.2 Universal Dimmer, 6 fold, 315VA ACTUATORS - OUTPUTS
Mehrkanal-Universaldimmaktor zur Steuerung von Glühlampen, 230V- und Niedervolt-Halogenlampen mit konventionellen oder elektron. Transformatoren bis 210VA. Status-/Zustandsanzeige der Ausgänge über LED. Vor-Ort-Bedienung auch ohne Busspannung möglich
12735
UD/S 6.315.2 UNIVERSAL DIMMER, 6 FOLD, 315VA ACTUATORS - OUTPUTS
12736 UD/S 4.600.2 Universal Dimmer, 4 fold, 600VA ACTUATORS - OUTPUTS
Multi-channel universal actuator for the control of incandescent lamps, 230V and low-voltage halogen lamps with conventional or electronical Transformers up to 210VA. Status / status indication of the outputs via LED. On-site operation also possible without bus voltage
12736
UD/S 4.600.2 UNIVERSAL DIMMER, 4 FOLD, 600VA ACTUATORS - OUTPUTS
13344 SV/S 30.320.2.1 Power Supply with diagnostics, 320 mA, MDRC SYSTEM DEVICES
Power supply with integrated choke and bus coupler for diagnostic function via KNX or ABB i-bus ® tool. LED Display: Bus current, status, overload, telegram and communication.
13344
SV/S 30.320.2.1 POWER SUPPLY WITH DIAGNOSTICS, 320 MA, MDRC SYSTEM DEVICES
13345 SV/S 30.640.5.1 Power Supply with diagnostics, 640 mA, MDRC SYSTEM DEVICES
Power supply with integrated choke and bus coupler for diagnostic function via KNX or ABB i-bus ® tool. With 30 VDC output to supply a second line in connection with a separate choke. LED Display: Bus current, status, overload, telegram and communication.
13345
SV/S 30.640.5.1 POWER SUPPLY WITH DIAGNOSTICS, 640 MA, MDRC SYSTEM DEVICES
13348 SA/S 2.6.2.1 Switch Actuator, 2-fold, 6A, with manual operation, MDRC ACTUATORS - OUTPUTS
Uses potential free contacts to switch 2 independent electrical loads via the ABB i-bus®. Manual and visual operation. The 6A-AC3 device is especially suited to switch resistive, inductive or capacitive loads.
13348
SA/S 2.6.2.1 SWITCH ACTUATOR, 2-FOLD, 6A, WITH MANUAL OPERATION, MDRC ACTUATORS - OUTPUTS
13349 SA/S 4.6.2.1 Switch Actuator, 4-fold, 6A, with manual operation, MDRC ACTUATORS - OUTPUTS
Uses potential free contacts to switch 4 independent electrical loads via the ABB i-bus®. Manual and visual operation. The 6A-AC3 device is especially suited to switch resistive, inductive or capacitive loads.
13349
SA/S 4.6.2.1 SWITCH ACTUATOR, 4-FOLD, 6A, WITH MANUAL OPERATION, MDRC ACTUATORS - OUTPUTS
13355 SA/S 8.6.2.1 Switch Actuator, 8-fold, 6A, with manual operation, MDRC ACTUATORS - OUTPUTS
Uses potential free contacts to switch 4 independent electrical loads via the ABB i-bus®. Manual and visual operation. The 6A-AC3 device is especially suited to switch resistive, inductive or capacitive loads.
13355
SA/S 8.6.2.1 SWITCH ACTUATOR, 8-FOLD, 6A, WITH MANUAL OPERATION, MDRC ACTUATORS - OUTPUTS
13363 SA/S 12.6.2.1 Switch Actuator, 12fold, 6A, with manual operation, MDRC ACTUATORS - OUTPUTS
Uses potential free contacts to switch 12 independent electrical loads via the ABB i-bus®. Manual and visual operation. The 6A-AC3 device is especially suited to switch resistive, inductive or capacitive loads.
13363
SA/S 12.6.2.1 SWITCH ACTUATOR, 12FOLD, 6A, WITH MANUAL OPERATION, MDRC ACTUATORS - OUTPUTS
13364 HS/S 4.2.1 Outside Light Sensor Interface, MDRC SENSORS
The device can be used as a twilight switch (1 ... 100 lux) or as a light value switch (100 ... 20.000 lux). One Outside Light Sensor LFO/A 1.1 is supplied with the device.
13364
HS/S 4.2.1 OUTSIDE LIGHT SENSOR INTERFACE, MDRC SENSORS
13702 8136/09-811-500 Busch-ComfortTouch(R) 9" VISUALIZATION
Free programmable IP/KNX touch display can be used as a control, infotainment and entertainment centre for the whole house With a closed capacitative glass surface and a design strip made of stainless steel (brushed). With integrated camera. Easy control
13702
8136/09-811-500 BUSCH-COMFORTTOUCH(R) 9" VISUALIZATION
13704 8136/12-811-500 Busch-ComfortPanel(R) 12.1" SIN FAMILIA
Free programmable IP/KNX touch display can be used as a control, infotainment and entertainment centre for the whole house With a closed capacitative glass surface and a design strip made of stainless steel (brushed). With integrated camera. Easy control

 

13704
8136/12-811-500 BUSCH-COMFORTPANEL(R) 12.1" SIN FAMILIA
13756 BM/A 1.1.1 Outdoor moviment detector, basic, 16m, 220° DETECTORS

Guard sensor for wall mounting with integrated KNX bus coupling unit (IP55).

With 2 motion channels and 1 twilight channel with 3 switching thresholds.

Surveillance density: 92 sectors with 368 switching segments, twilight sensor:

Approx. 1 - 1,000 lux, switch-off delay: approx. 10 sec. To 1092 min, sensor angle: 220 °,

Range: 16 m

13756
BM/A 1.1.1 OUTDOOR MOVIMENT DETECTOR, BASIC, 16M, 220° DETECTORS
15936 AE/S 4.1.1.3 Analog Input 4-fold, MDRC, (1 – 10 V, 0(4) – 20 mA, 0 – 1 V, PT 100, PT 1000,…) INPUTS
Analog Input 4-fold, MDRC, (1 – 10 V, 0(4) – 20 mA, 0 – 1 V, PT 100, PT 1000,…)
15936
AE/S 4.1.1.3 ANALOG INPUT 4-FOLD, MDRC, (1 – 10 V, 0(4) – 20 MA, 0 – 1 V, PT 100, PT 1000,…) INPUTS
16112 SV/S 30.160.1.1 Power Supply, 160 mA, MDRC SYSTEM DEVICES

Power Supply, 160 mA, MDRC

with integrated choke for supplying a bus line with ABB i-bus® system voltage. With two-coloured status indicator and wide range input from 85…265 V AC, 50/60 Hz.

16112
SV/S 30.160.1.1 POWER SUPPLY, 160 MA, MDRC SYSTEM DEVICES
16113 SV/S 30.320.1.1 Power Supply, 320 mA, MDRC SYSTEM DEVICES

Power Supply, 320 mA, MDRC

with integrated choke for supplying a bus line with ABB i-bus® system voltage. With two-coloured status indicator and wide range input from 85…265 V AC, 50/60 Hz.

16113
SV/S 30.320.1.1 POWER SUPPLY, 320 MA, MDRC SYSTEM DEVICES
16114 SV/S 30.640.3.1 Power Supply, 640 mA, MDRC SYSTEM DEVICES

Power Supply, 640 mA, MDRC

with integrated choke and additional 30 V DC output to supply a second line in connection with a separate choke with ABB i-bus® system voltage. With two-coloured status indicator and wide range input from 85…265 V AC, 50/60 Hz

16114
SV/S 30.640.3.1 POWER SUPPLY, 640 MA, MDRC SYSTEM DEVICES
16535 WZ/S 1.3.1.2 Weather Unit, MDRC SENSORS
The deviceis detect weather data from the weather sensor (twilight, brightness in 3 directions, rain, temperature, day/night, wind speed, date and time). The WZ/S can only be used the WES/A. No separated power supply nessecary.(ibus Tool)
16535
WZ/S 1.3.1.2 WEATHER UNIT, MDRC SENSORS
16537 WS/S 4.1.1.2 Weather Station, 4-fold, MDRC SENSORS
All common weather sensors for wind speed, wind direction, rain, amount of rain, brightness, light intensity, pyranometers, twilight, air pressure, humidity or temperature can be connected to the device. The power supply generates the 24 V DC voltage for external sensors (max.
300 mA). The device can be operated with 85 to 265 V AC, 50/60 Hz. The application software is configured for the detection of weather based data and enables quick sensor programming. The Weather Station supports the ABB i-bus Tool for advanced diagnosis and improved commissioning
16537
WS/S 4.1.1.2 WEATHER STATION, 4-FOLD, MDRC SENSORS
16538 GM/A 8.1 KNX Alarm Control Panel AP ALARMS CENTRAL

The KNX Security Panel is used to manage up to 5 logical areas with up to 344 zones, of which 8 zones are integrated. The number of zones via the Security Bus S-Bus 1 is dependent on the current requirement (max. 800 mA) of the connected system components, cable length and cross-section. An additional 128 zones can be integrated via KNX. The network connection is used for
parameterization, operation and display via the existing web server. The Panel possesses 4 outputs for the signaling device
and 4 outputs for potential-free switching (12...30 V DC).

The integrated modem is used for private remote alarms using spoken messages, SMS (SMS center) and e mail. In addition,
a system interface (ATS) allows the connection of an external ABB transmission device of the comXline series, for connection
to a security company. It is possible to connect 2x18 Ah rechargeable batteries as critical power for up to 60 hours, in
accordance with VdS, DIN EN and ISO/IEC. The device can be used in systems with increased security requirements
according to VdS Class A, B and C, DIN VDE 0833 Grade 1, 2, 3 and EN 50 131 / IEC 62 642 Grade 1, 2, 3.

16538
GM/A 8.1 KNX ALARM CONTROL PANEL AP ALARMS CENTRAL
16727 FCA/S 1.1.2.2 Fan Coil Actuator, PWM, Manual Op., MDRC SIN FAMILIA

Fans, also referred to as blower convectors or Fan Coil units, are used for distributed heating and cooling applications. They are installed in rooms and powered via central heating and cooling systems. Using fans, room temperature can be quickly adjusted to suit individual preferences.

Fan Coil Actuators switch multi-level fans with up to three fan speeds via floating contacts. Three inputs are available, for monitoring of a window contact and the dew point or for connecting temperature sensors. An additional contact is possible, for example, for control of an electric heater.

Fan Coil Actuators vary in the way they control the valves.

The Fan Coil Actuators FCA/S 1.1.x.2 have two outputs for control of motor power operated or thermal heating and cooling valves.

The Fan Coil Actuators FCA/S 1.2.x.2 have two outputs for control of analog heating and cooling valves.

16727
FCA/S 1.1.2.2 FAN COIL ACTUATOR, PWM, MANUAL OP., MDRC SIN FAMILIA
17247 FCL/S 1.6.1.1 Blower Actuator, 1-fold, 6 A, MDRC CLIMATE CONTROL
Actuator to control a blower or fan with up to three fan speeds via step or changeover control. In addition to the fan output a floating switch output is present.
17247
FCL/S 1.6.1.1 BLOWER ACTUATOR, 1-FOLD, 6 A, MDRC CLIMATE CONTROL
17390 ABA/S 1.2.1 KNX LOGIC CONTROLLER ABA/S 1.2.1 CONTROLLERS
The new ABB i-bus KNX Logic Controller ABA/S 1.2.1
With the new ABB Logic Controller ABA/S 1.2.1 system integrators can quickly and flexibly deal with the most challenging project requirements – with a maximum of design freedom. That is because the logic controller can easily and reliably accommodate altered or extended functionality requests during construction or usage of buildings. The Logic Controller comes in a newly developed housing for mounting on a DIN rail enabling easy dismounting without the necessity for a tool.
What makes the device so compelling is not just the graphical programming interface in the ETS software environment. It comes also with a comprehensive library of functions to control all building applications. The library includes solutions for heating, ventilation and climate control. The installation of extra software is not necessary. Another benefit is the innovative technology. The device uses state-of-the-art and energy-efficient microcontroller technology.
Furthermore, the system comes with a simulator function. Using simulation the system integrator is able to make sure that the logic controller performs all commands correctly before commissioning the device on the project’s site.
Adjusting the settings later – according to a possible changed building usage – is easy and cost-effective for the system integrator. Thus the Logic Controller is a reliable companion for KNX system integrators to successfully implement their projects.
Benefits:
Maximum design freedom for KNX system integrators by easily extending functionality during a building’s construction and usage
Graphical programming interface in ETS software environment without the need to install additional software
Comprehensive library of functions for all typical building applications
Inbuilt simulator facilitates efficient and reliable commissioning on the project’s site. All functions can be tested before going live
Newly developed housing enabling dismounting on DIN rail without any tools
17390
ABA/S 1.2.1 KNX LOGIC CONTROLLER ABA/S 1.2.1 CONTROLLERS
18615 IPR/S 3.1.1 IP-Router, REG IPR/S 3.1.1 SYSTEM DEVICES

Connects the KNX bus with the Ethernet network. The device uses the KNXnet/IP protocol for communication (Routing and Tunneling). It can be used as a fast line and area coupler. The full filter table for main groups 0-31 is supported. KNX devices can be programmed via the LAN using ETS. For this and further clients 5 Tunneling Server are available. The IP address can be fixed or can be received from a DHCP server. Power supply via 12..30 V DC or PoE. The KNX Standard Communication (Multicast) can be switched off. In this case, up to 10 IPR/S  3.1.1 can communicate using unicast communication

18615
IPR/S 3.1.1 IP-ROUTER, REG IPR/S 3.1.1 SYSTEM DEVICES
18616 IPS/S 3.1.1 IPS / S3.1.1 Interface IP, MDRC SYSTEM DEVICES

Connects the KNX bus with the Ethernet network. The device uses the KNXnet/IP protocol for communication (Tunneling). KNX devices can be programmed via the LAN using ETS. For this and further clients 5 Tunneling Server are available. The IP address can be fixed or can be received from a DHCP server. Power supply via 12..30 V DC or PoE

18616
IPS/S 3.1.1 IPS / S3.1.1 INTERFACE IP, MDRC SYSTEM DEVICES
18617 ISM/S 5.1 IP Switch Master, 5 Port, MDRC SYSTEM DEVICES
IP Switch Master for DIN rail mounting. To connect up to 5 terminal devices. Can be extended to 10 terminal devices through lateral coupling with the IP Switch Slave (ISS/S).One port is a Gigabit-Ethernet port and can be used as uplink port.
18617
ISM/S 5.1 IP SWITCH MASTER, 5 PORT, MDRC SYSTEM DEVICES
18618 EG/A 32.2.1 KNX/EnOcean Gateway, SM GATEWAYS

The EnOcean gateway establishes a connection between KNX and EnOcean devices and allows bidirectional transmission of signals. The frequency of this product (868.3 MHz) is not approved for all countries. Please check the technical documentation below
18618
EG/A 32.2.1 KNX/ENOCEAN GATEWAY, SM GATEWAYS
18632 FCL/S 2.6.1.1 Blower Actuator. FAN COIL, 2f, 6 A, MDRC CLIMATE CONTROL

    Controls one two blowers or fans with up to three fan speeds via step or changeover control. Furthermore two additional equipments like a damper or valve can be switched by two floating outputs. Optionaly the second fan output can be switched to three switch outputs. The fan speed can be directly choosen, increased and decreased as well as controlled by the control value of a external closed-loop controller.
18632
FCL/S 2.6.1.1 BLOWER ACTUATOR. FAN COIL, 2F, 6 A, MDRC CLIMATE CONTROL
18677 SRO/U 1.1.2 Room temperature controller CLIMATE CONTROL

Room temperature controller without "on-site operation". With integrated KNX bus coupler. To the
Heating and cooling. For controlling conventional actuators. For control
of up to 5-stage ventilation actuators. Can only be used with a central disc SRZ / U.
18677
SRO/U 1.1.2 ROOM TEMPERATURE CONTROLLER CLIMATE CONTROL
18679 SE/K 1.868.1 EnOcean valve drive GATEWAYS
The EnOcean actuator is used for efficient room temperature control in private and commercial areas
commercial facilities. It communicates wirelessly via a bidirectional EnOcean
Standard radio protocols, has a large display and a rotary wheel for manual operation
Service.
The EnOcean actuator is suitable for use with the ABB i-bus KNX / EnOcean Gate-
way EG / A 32.2.1. EnOcean valve drive
18679
SE/K 1.868.1 ENOCEAN VALVE DRIVE GATEWAYS
18680 6136/APP-500 IP-/KNX gateway Busch-ControlTouch ® , REG GATEWAYS
Freely programmable IP-/KNX gateway as multi-room app control for the KNX system. MDRC devices with associated IOS and Android apps. Easy control using intuitive navigation concept. Representation of individual operating pages with list view. Complete web-based commissioning. Home automation, switching, dimming, blind, RTC control, scene/sequences, timing, Philips Hue. Entertainment: multimedia integration via UPnP. Infotainment: monitoring of usage data for up to 3 years. Safety: video surveillance with IP cameras, message function via push messages or e-mail. Time programs and scenes can be created by the end customer. Access via KNXnet/IP tunnelling. Script editor for logic functions. Compatible with ABB i-bus® KNX Control with smartphones and tablets via the ControlTouch app (Apple iOS /Google Android). External power supply: 5-36 VDC (SELV).
18680
6136/APP-500 IP-/KNX GATEWAY BUSCH-CONTROLTOUCH ® , REG GATEWAYS
18681 FCA/S 1.2.2.2 Fan Coil Actuator., 0-10V, MDRC CLIMATE CONTROL
Controls typical fan coil units by two analogue outputs for 0 - 10 V valve drives and a 3 channel output for fan with up to 3 stages. A additional load (up to 16 A) like a auxiliary heating can be controlled by a switch output. Window sensors, condensed water sensors and temperature sensors can be connected to the three universal inputs. The device has a manual operation for quick maintenance. The Fan Coil Actuator supports the ABB i-bus Tool for advanced diagnosis and improved commissioning.
18681
FCA/S 1.2.2.2 FAN COIL ACTUATOR., 0-10V, MDRC CLIMATE CONTROL
18686 FCA/S 1.2.1.2 ACTUATOR FanCoil, 0-10V, MDRC CLIMATE CONTROL
Controls typical fan coil units by two analogue outputs for 0 - 10 V valve drives and a 3 channel output for fan with up to 3 stages. Also a additional load (up to 16 A) like a auxiliary heating can be controlled by a switch output. Window sensors, condensed water sensors and temperature sensors can be connected to the three universal inputs. The Fan Coil Actuator supports the ABB i-bus Tool for advanced diagnosis and improved commissioning.
18686
FCA/S 1.2.1.2 ACTUATOR FANCOIL, 0-10V, MDRC CLIMATE CONTROL
18689 MG/A 4.4.1 Zone Module, 4fold For expansion of the Security-Pane GM/A 8.1l by 4 detector zones. ALARMS CENTRAL
To connect to Security Panel GM/A 8.1 via the Security-Bus. For expansion of the Security-Panel by 4 detector zones. Used for connection to the exterior perimeter detectors such as magnetic reed contacts and passive glass break sensors. The module has 4 zones to which several detectors can be connected. The status of each zone is displayed with a status LED. The Zone Module delivers the control signals and the supply voltage for the external detectors. There is no need for an external voltage supply, the Zone Modules are supplied via the Security-Bus
18689
MG/A 4.4.1 ZONE MODULE, 4FOLD FOR EXPANSION OF THE SECURITY-PANE GM/A 8.1L BY 4 DETECTOR ZONES. ALARMS CENTRAL
18690 WA/Z 1.1 Opening detector for intrusion detection system ALARMS CENTRAL
for the connection to the KNX Securitry Panel GM/A8.1. For tamper detection according to EN 50131 Grade 3.
18690
WA/Z 1.1 OPENING DETECTOR FOR INTRUSION DETECTION SYSTEM ALARMS CENTRAL
13709 A41 111-100 Energy meter, direct measurement 80A, 1 phase (1 + N) SMART METERING

 

13709
A41 111-100 ENERGY METER, DIRECT MEASUREMENT 80A, 1 PHASE (1 + N) SMART METERING
1968 KS/K 4.1 CABLE SETS SYSTEM DEVICES
For connection of sealed lead acid batteries SAK7, SAK12 and SAK17 to the uninterruptible EIB power supply SU/S 30.640.1. In case only one battery is connected, the Basic Cable Set KS/K 4.1 with integrated temperature sensor is to be used.

1968
KS/K 4.1 CABLE SETS SYSTEM DEVICES
1969 KS/K 2.1 CABLE SETS SYSTEM DEVICES
For connection of batteries SAK7, SAK12 and SAK17 to the Uninterruptible EIB Power Supply SU/S 30.640.1. If two batteries are connected, Cable Set KS/K 4.1 is used for the first battery and the Cable Set KS/K 2.1 is used for the second battery.

1969
KS/K 2.1 CABLE SETS SYSTEM DEVICES
1970 SAK7 SEALED LEAD ACID BATTERIES, 12 V DC SYSTEM DEVICES
Sealed lead acid batteriy for backing up the ABB i-bus® system voltage in connection with the uninterruptible EIB power supply SU/S 30.640.1. For connection to the SU/S 30.640.1 the cable sets KS/K 4.1 and KS/K 2.1 are to be used.

1970
SAK7 SEALED LEAD ACID BATTERIES, 12 V DC SYSTEM DEVICES
1971 SAK12 SEALED LEAD ACID BATTERIES, 12 V DC SYSTEM DEVICES
Sealed lead acid batteriy for backing up the ABB i-bus® system voltage in connection with the uninterruptible EIB power supply SU/S 30.640.1. For connection to the SU/S 30.640.1 the cable sets KS/K 4.1 and KS/K 2.1 are to be used.

1971
SAK12 SEALED LEAD ACID BATTERIES, 12 V DC SYSTEM DEVICES
1972 SAK17 SEALED LEAD ACID BATTERIES, 12 V DC SYSTEM DEVICES
Sealed lead acid batteriy for backing up the ABB i-bus® system voltage in connection with the uninterruptible EIB power supply SU/S 30.640.1. For connection to the SU/S 30.640.1 the cable sets KS/K 4.1 and KS/K 2.1 are to be used.

1972
SAK17 SEALED LEAD ACID BATTERIES, 12 V DC SYSTEM DEVICES
1974 NT/S 12.1600 POWER SUPPLY UNITS, MDRC SYSTEM DEVICES
Power supply for usage as the auxiliary power supply in EIB installations or other SELV applications. Supplies a regulated output voltage of 12 V DC and a max. output current of 1.6 A. Protection against overload and short-circuit.

1974
NT/S 12.1600 POWER SUPPLY UNITS, MDRC SYSTEM DEVICES
1975 NT/S 24.800 POWER SUPPLY UNITS, MDRC SYSTEM DEVICES
Power Supply Units, MDRC Two power supply units that can be used universally as the auxiliary power supply in EIB installations or other SELV applications. The devices supply a regulated output voltage of 12 V DC or 24 V DC with a maximum output current of 1.6 A or 0.8 A. The units are protected against overload, the output being able to sustain a continuous short circuit. The devices are connected via screw terminals. 24 V DC, 0.8 A
1975
NT/S 24.800 POWER SUPPLY UNITS, MDRC SYSTEM DEVICES
1997 KLEMME Connection Terminal, white/yellow SYSTEM DEVICES
Connection Terminal, white/yellow Interconnects ABB i-bus® devices having a rear side connection terminal that are mounted on DIN EN 5022 DIN-rails. The data rail is fixed into the DIN-rail, using the adhesive stripe on the rear.
1997
KLEMME CONNECTION TERMINAL, WHITE/YELLOW SYSTEM DEVICES
2000 BE/M 4.230.1 BINARY INPUT MODULES, 4-FOLD INPUTS
The 4-fold binary input module is operated in any slot in the Room-Controller Basis Device. It has four inputs for reading 115 V or. 230 V contacts, such as conventional switches and buttons. The device provides the signal voltage (input voltage to the Room-Controller) if necessary. Input voltage and the internal power are supplied via the Room-Controller Basis Device. The connections are made automatically when the module is snapped in place.
2000
BE/M 4.230.1 BINARY INPUT MODULES, 4-FOLD INPUTS
2001 BE/M 4.24.1 BINARY INPUT MODULES, 4-FOLD INPUTS
Binary Input Module, 4-fold, 24 V AC/DC Carry: Device for the operation in the Room Controller Basis Device RC/A 8.1. 4 inputs for reading out 12 or 24 V AC/DC signals. The voltage must be supplied externally. The following functions can be set separately for each input: - reaction on pulse edge - cyclical sending of switching commands - sending of switching/dimming commands - operation of blinds and roller shutters - operation of dimmable lighting and blinds/roller shutters via a single input - control and storage of lightscenes - sending of value and data types - pulse counter
2001
BE/M 4.24.1 BINARY INPUT MODULES, 4-FOLD INPUTS
2002 BE/M 4.12.1 Binary Input Module, 4-fold, contact scanning INPUTS
The 4-fold Binary Input Module is operated in any module slot of the Room Controller Base Unit. It has four inputs for reading out floating contacts such as conventional switches and push buttons. The device makes the pulsed scanning voltage (12 V) available. The internal supply is carried out via the Room Controller Base Unit. Contact is automatically established when the module is snapped in place. Contact Scanning
2002
BE/M 4.12.1 BINARY INPUT MODULE, 4-FOLD, CONTACT SCANNING INPUTS
2003 SA/M 2.6.1 SWITCH ACTUATOR MODULE, 2-FOLD, 6 A ACTUATORS - OUTPUTS
Switch Actuator Module, 2-fold, 6A Module for plugging into the Room Controller Basis Device. It switches currents up to 16 A with two relays. The maximum continuous current is 6 A. .
2003
SA/M 2.6.1 SWITCH ACTUATOR MODULE, 2-FOLD, 6 A ACTUATORS - OUTPUTS
2004 JA/M 2.230.1 SHUTTER ACTUATOR MODULES, 2-FOLD 230 V AC ACTUATORS - OUTPUTS
Shutter Actuator Module, 2-fold, 230 V AC Module for plugging into the Room Controller Basis Device. They control two independent blind or shutter drives with 115/230 V AC. Special functions: Move to position and sun protection automatic control.
2004
JA/M 2.230.1 SHUTTER ACTUATOR MODULES, 2-FOLD 230 V AC ACTUATORS - OUTPUTS
2005 JA/M 2.24.1 SHUTTER ACTUATOR MODULES, 2-FOLD 24 V DC ACTUATORS - OUTPUTS
Shutter Actuator Module, 2-fold, 24 V DC Module for plugging into the Room Controller Basis Device. They control two independent blind or shutter drives with 24 V DC. Special functions: Move to position and sun protection automatic control.
2005
JA/M 2.24.1 SHUTTER ACTUATOR MODULES, 2-FOLD 24 V DC ACTUATORS - OUTPUTS
2008 UD/M 1.300.1 UNIVERSAL DIM ACTUATOR MODULE, 1-FOLD, 300 VA ACTUATORS - OUTPUTS
Universal Dim Actuator Module, 1-fold, 300 VA Module for plugging into the Room Controller Basis Device. It dims incandescent lamps, 230 V or low halogen lamps with up to 300 W/VA. Automatic load detection. Compensated against ripple-control and voltage fluctuations. Only 2 W minimum load.
2008
UD/M 1.300.1 UNIVERSAL DIM ACTUATOR MODULE, 1-FOLD, 300 VA ACTUATORS - OUTPUTS
2009 ES/M 2.230.1 ELECTRONIC SWITCH ACTUATOR MODULES, 2 FOLD CLIMATE CONTROL
Modules for plugging into the room controller basis device. The electronic switch actuator modules have 2 overload-proof and noise-free outputs. For controlling heating systems and cooling ceilings via electrothermal valve drives. Two module types are available for voltages of 115/230 V and 12/24 V (AC or DC).
2009
ES/M 2.230.1 ELECTRONIC SWITCH ACTUATOR MODULES, 2 FOLD CLIMATE CONTROL
2010 ES/M 2.24.1 ELECTRONIC SWITCH ACTUATOR MODULES, 2-FOLD CLIMATE CONTROL
Modules for plugging into the room controller basis device. The electronic switch actuator modules have 2 overload-proof and noise-free outputs. For controlling heating systems and cooling ceilings via electrothermal valve drives. Two module types are available for voltages of 115/230 V and 12/24 V (AC or DC).
2010
ES/M 2.24.1 ELECTRONIC SWITCH ACTUATOR MODULES, 2-FOLD CLIMATE CONTROL
2063 TS/K 1.1 TEMPERATURE SENSOR FOR FAN COIL CONTROLLER SENSORS

Temperature sensor for Fan Coil Controller FC/S 1.1
.
2063
TS/K 1.1 TEMPERATURE SENSOR FOR FAN COIL CONTROLLER SENSORS
2064 ER/U 1.1 ELECTRONIC RELAY, 1-FOLD, FM CLIMATE CONTROL
The device is used in combination with the universal interface US/U x.2 and a room thermostat to control the temperature in individual rooms.

The thermal valve drives of the radiator valves are operated both noisefree and with a low rate of wear.
2064
ER/U 1.1 ELECTRONIC RELAY, 1-FOLD, FM CLIMATE CONTROL
2077 MT701.2,WS CONTROL AND DISPLAY TABLEAU, LCD AND ACCESSORIES VISUALIZATION
Control and Dispaly Tableau, LCD, White

Device with LCD-Display and control buttons for - indication of switching status, fault reports and measurement values, - central switching of electrical consumers - adjustment time programs and light scenes - acoustical alarm signals.
2077
MT701.2,WS CONTROL AND DISPLAY TABLEAU, LCD AND ACCESSORIES VISUALIZATION
2079 T-RAHM, WS FRAME FOR DISPLAY TABLEAU, WHITE VISUALIZATION
The display and control tableau is an
ABB i-bus®-device with LCD-Display and control
buttons for
• indication of switching status, fault reports and measurement values,
• central switching of electrical consumers,
• adjustment time programs and light scenes,
• acoustical alarm signals.
Wall Box for mounting the MT 701.2 in walls or
partitioned walls and cover frame.
Cover Frame, white
2079
T-RAHM, WS FRAME FOR DISPLAY TABLEAU, WHITE VISUALIZATION
2081 UP-KAST 2 Wall box for Control and Display Tableau VISUALIZATION

The Wall Box is used for flush mounting or wall mounting of the Display and Control Tableau MT701.

 

Technical Data

 Material, colour  Plastic housing, grey

Mounting Flush mounting or wall mounting

Dimensions 212 x 124 x 75 mm (W x H x D

2081
UP-KAST 2 WALL BOX FOR CONTROL AND DISPLAY TABLEAU VISUALIZATION
2085 MD/U 1.1 RAUM-/CONTROLPANEL, TOUCH-DISPLAY UND ZUBEHÖR, UP VISUALIZATION
Die Raum- (80 Funktionen) und Controlpanels (210 Funktionen) sind ABB i-bus® - Geräte mit einem Touch-Display in farbiger oder schwarz/weißer Ausführung. Die Panels dienen zum komfortablen Anzeigen von Schaltzuständen, Störmeldungen und Messwerten, manuellem Schalten von Verbrauchern, Einstellung von Zeitprogrammen und Lichtszenen, sowie zum Abgeben akustischer Warnmeldungen oder Weckfunktionen. Die Panels enthalten einen integrierten Raumtemperaturregler. Die Inbetriebnahme erfolgt über ABB i-bus® oder Multimedia-Card/SD-Card. Zur Unterputzmontage in Wänden und Hohlwänden ist die Montagedose MD/U 1.1 zu verwenden. Montagedose
2085
MD/U 1.1 RAUM-/CONTROLPANEL, TOUCH-DISPLAY UND ZUBEHÖR, UP VISUALIZATION
2108 IRHS Infrared Hand Held Transmitter OTHER ACCESSORIES
Infrared Hand Held Transmitter
Infrared hand-held transmitter. Network-independent
remote control for infrared receiver and EIB flushmounted
infrared interface (10 consumers switchable in
2 groups, 1 – 5/6 – 10, programming and selection of
2 MEMO memories per address group).
Supply: 4 alkaline manganese batteries, IEC LR03
(microcell) (not included in scope of supply)
Range: frontal, approx. 15 m.
2108
IRHS INFRARED HAND HELD TRANSMITTER OTHER ACCESSORIES
2109 RS/U 1.1 FRAME STUDIO WHITE, SERIE SOLO SIN FAMILIA
Frames, solo® Cover frames for vertical and horizontal installation. 1-fold studio white
2109
RS/U 1.1 FRAME STUDIO WHITE, SERIE SOLO SIN FAMILIA
2110 RS/U 2.1 FRAME STUDIO WHITE, SERIE SOLO SIN FAMILIA
Frames, solo®
Cover frames for vertical and horizontal installation.
2 fold
studio white
2110
RS/U 2.1 FRAME STUDIO WHITE, SERIE SOLO SIN FAMILIA
2154 SAD/GAP BOX OF FALSE ROOF FOR THE SYSTEM OF ALARM ANTI-INTRUSION SAD/GAP SIN FAMILIA
BOX OF FALSE ROOF FOR THE SYSTEM OF ALARM ANTI-INTRUSION SAD/GA
2154
SAD/GAP BOX OF FALSE ROOF FOR THE SYSTEM OF ALARM ANTI-INTRUSION SAD/GAP SIN FAMILIA
2157 SPGS/W GLASS BREAK SENSOR ALARMS CENTRAL
For surveillance of glass surfaces of windows, display windows and doors with high interference immunity and integrated memory display. For operation directly on detector circuits of intrusion alarm panels or zone terminals. Extremely compact dimensions. Dimensions: H x W x D = 18 x 18 x 9 mm. Mounted onto glass using Loctite adhesive (LKS). With 5 m connection cable.
2157
SPGS/W GLASS BREAK SENSOR ALARMS CENTRAL
2159 LKS Loctite Adhesive SIN FAMILIA
Loctite Adhesive Loctite Adhesive for mounting Glass Break Sensors SPGS and Vibration Detector EMA.
2159
LKS LOCTITE ADHESIVE SIN FAMILIA
2163 VSUE WINDOW LOCK MONITORING CONTACT ALARMS CENTRAL
Window Lock Monitoring Contact Lock monitoring is carried out with a special magnet and a reed contact. The magnet is mounted on the push rod of the window sash while the reed contact is mounted on the frame. The connection cable LIYY 4 x 0.14 mm2 is 4 m in length.
2163
VSUE WINDOW LOCK MONITORING CONTACT ALARMS CENTRAL
2167 MW Mounting Bracket for movement detectors ALARMS CENTRAL
Mounting Bracket for movement detectors EIM/B1 and EIM/C
2167
MW MOUNTING BRACKET FOR MOVEMENT DETECTORS ALARMS CENTRAL
2168 EIM/DB DUAL CEILING DETECTOR ALARMS CENTRAL
The dual ceiling detector EIM/DB operates according to the proven detection principle of the EIM detector (infrared technology and electromagnetic field) over 360°. The range of the infrared component can be adapted via the mounting height while the range of the electromagnetic field can be adjusted separately using a jumper. The detector is fitted with a walk test LED. Colour: pure white.
2168
EIM/DB DUAL CEILING DETECTOR ALARMS CENTRAL
2169 ND/W EMERGENCY CALL BUTTON ALARMS CENTRAL
Emergency Call Button, white, SM For manual alarm tripping. Complies with the police regulations since it features permanent trip recognition, momentary-contact function, with cover contact. Colour: white. Surface mounting.
2169
ND/W EMERGENCY CALL BUTTON ALARMS CENTRAL
2170 NDU/W Emergency Call Button, FM ALARMS CENTRAL
Emergency Call Button, FM For manual alarm tripping. Complies with the police regulations since it features permanent trip recognition, momentary-contact function, with cover contact. Colour: white. Flush mounting.
2170
NDU/W EMERGENCY CALL BUTTON, FM ALARMS CENTRAL
2171 EP SUBST. PAPER FOR EMERGENCY CALL BUTTON Spare Papers (10 pcs.) ALARMS CENTRAL
vSUBST. PAPER FOR EMERGENCY CALL BUTTON Spare Papers (10 pcs.)
2171
EP SUBST. PAPER FOR EMERGENCY CALL BUTTON SPARE PAPERS (10 PCS.) ALARMS CENTRAL
2179 SGL GAS DETECTOR ALARMS CENTRAL
Is able to measure and evaluate the concentration of natural gas or liquidfied gas in the air. The detector requires a 10-30 V DC voltage supply and has a relay output contact for connection to e.g. Zone Terminals. With LED-indicator and Piezo buzzer.
2179
SGL GAS DETECTOR ALARMS CENTRAL
2180 SSS Electronic solid-state siren SIN FAMILIA
Electronic solid-state siren Electronic solid-state siren with intermittent tone for alarm purposes in indoor installations.
2180
SSS ELECTRONIC SOLID-STATE SIREN SIN FAMILIA
2181 SSF/GB COMBINATION SIGNALLING DEVICE SIN FAMILIA
Combination Signalling Device Siren in an aluminium protective housing with additional protective enamel coating and strobe light mounted on top. Protected against sabotage by a case tamper contact. The alarm inputs are wired onto a terminal strip.
2181
SSF/GB COMBINATION SIGNALLING DEVICE SIN FAMILIA
2186 ST-E LABEL CARRIERS OTHER ACCESSORIES
Comprising of transparent label carriers and slide- labelled or unlabelled paper designation plates. be used for switches, push buttons, indicator lamps, remote control switches, wiring relays as well as miniature circuit breakers, residual current operated circuit breakers and ABB i-bus® components. labels blank
2186
ST-E LABEL CARRIERS OTHER ACCESSORIES
2187 ST-EN LABEL CARRIERS OTHER ACCESSORIES
Label Carriers Comprising of transparent label carriers and slide- labelled or unlabelled paper designation plates. be used for switches, push buttons, indicator lamps, remote control switches, wiring relays as well as miniature circuit breakers, residual current operated circuit breakers and ABB i-bus® components labels (1 set = 5x 1 – 100)
2187
ST-EN LABEL CARRIERS OTHER ACCESSORIES
2188 SZ-KZS DESIGNATION PLATES OTHER ACCESSORIES
Designation Plates Comprising of 40 designation plates, labelled or unlabelled. The plain designation plate mats can be labelled by hand with indelible, waterproof pens or with computer-controlled labelling systems (plotters). unlabelled
2188
SZ-KZS DESIGNATION PLATES OTHER ACCESSORIES
2189 SZ-KZS/1 DESIGNATION PLATES OTHER ACCESSORIES
Designation Plates Comprising of 40 designation plates, labelled or unlabelled. The plain designation plate mats can be labelled by hand with indelible, waterproof pens or with computer-controlled labelling systems (plotters). with Labelling 1 – 40
2189
SZ-KZS/1 DESIGNATION PLATES OTHER ACCESSORIES
2194 SZ-KZS/6 DESIGNATION PLATES WITH LABELLING 2 X 1 – 20 OTHER ACCESSORIES
Designation Plates Comprising of 40 designation plates, labelled or unlabelled. The plain designation plate mats can be labelled by hand with indelible, waterproof pens or with computer-controlled labelling systems (plotters). with Labelling 2 x 1 – 20
2194
SZ-KZS/6 DESIGNATION PLATES WITH LABELLING 2 X 1 – 20 OTHER ACCESSORIES
2195 SZ-KZS/9 DESIGNATION PLATES WITH LABELLING 4 X 1 – 10 OTHER ACCESSORIES
Designation Plates Comprising of 40 designation plates, labelled or unlabelled. The plain designation plate mats can be labelled by hand with indelible, waterproof pens or with computer-controlled labelling systems (plotters). with Labelling 4 x 1 – 10
2195
SZ-KZS/9 DESIGNATION PLATES WITH LABELLING 4 X 1 – 10 OTHER ACCESSORIES
2196 SZ-KZS/10 DESIGNATION PLATES WITH LABELLING 4 X 11 – 20 OTHER ACCESSORIES
Designation Plates Comprising of 40 designation plates, labelled or unlabelled. The plain designation plate mats can be labelled by hand with indelible, waterproof pens or with computer-controlled labelling systems (plotters). with Labelling 4 x 11 – 20
2196
SZ-KZS/10 DESIGNATION PLATES WITH LABELLING 4 X 11 – 20 OTHER ACCESSORIES
4413 MRS/W MAGNET REED CONTACT SET ALARMS CENTRAL
Magnet Reed Contact Set For opening surveillance of windows and doors, complete for bolting or drilling. Contents: 1 magnet, 1 reed contact with 4.0 m connection cable LIYY 4 x 0.14 mm², 2 housings, 2 spacer plates, 2 flanges 4 antimagnetic fixing screws.
4413
MRS/W MAGNET REED CONTACT SET ALARMS CENTRAL
4414 VMRS/W MAGNET REED CONTACT SET (20 PCS) ALARMS CENTRAL
Magnet Reed Contact Saver Set 20 pieces of magnet reed contact MRS/B. For opening surveillance of windows and doors, complete for bolting or drilling. Contents: 20 magnets, 20 reed contact with 4.0 m connection cable LIYY 4 x 0.14 mm², 40 housings, 40 spacer plates, 40 flanges 80 antimagnetic fixing screws.
4414
VMRS/W MAGNET REED CONTACT SET (20 PCS) ALARMS CENTRAL
4431 SWM4 WATER DETECTOR ALARMS CENTRAL
Water Detector A resin-encapsulated water detector with gold-plated Termipoint pins, detects water ingress, e.g., pipe fractures, ingress of groundwater and sewage, water damage caused by washing machines and dishwashers etc. To be connected to a Zone Terminal.
4431
SWM4 WATER DETECTOR ALARMS CENTRAL
4733 VA/Z 10.1 Valve Adapter, M30 x 1.5 CLIMATE CONTROL
Valve Adapter, M30 x 1.5

For the snap-on mounting of Thermoelectric Valve Drives TSA/K 230.1 and TSA/K 24.1 on valve bases or in heating circuit distributors. The adapter is compatible for valves of Dumser, Chronatherm, Vescal and KaMo.
4733
VA/Z 10.1 VALVE ADAPTER, M30 X 1.5 CLIMATE CONTROL
4734 VA/Z 50.1 Valve Adapters, M 30 X 1,5, CLIMATE CONTROL
Valve Adapter, M30 x 1.5

For the snap-on mounting of Thermoelectric Valve Drives TSA/K 230.1 and TSA/K 24.1. The adapter is compatible for valves of Honeywell, Reich, Cazzaniga, Landis & Gyr. and MNG.
4734
VA/Z 50.1 VALVE ADAPTERS, M 30 X 1,5, CLIMATE CONTROL
4735 VA/Z 78.1 Valve Adapter, Flange CLIMATE CONTROL
Valve Adapter, Flange

For the snap-on mounting of Thermoelectric Valve Drives TSA/K 230.1 and TSA/K 24.1 on valve bases or in heating circuit distributors. The adapter is compatible for Danfoss RA.
4735
VA/Z 78.1 VALVE ADAPTER, FLANGE CLIMATE CONTROL
4736 VA/Z 80.1 Valve Adapters, M 30 X 1,5, CLIMATE CONTROL
Valve Adapter, M30 x 1.5

Used for the snap-on mounting of Thermoelectric Valve Drives TSA/K 230.1 and TSA/K 24.1 on valve bases or in heating circuit distributors. The adapter is compatible for valves of Heimeier, Herb, Onda, Schlösser (from 1993), Oventrop.
4736
VA/Z 80.1 VALVE ADAPTERS, M 30 X 1,5, CLIMATE CONTROL
6159 MRSS/W MAGNET-REEDKONTAKT SET ALARMS CENTRAL
Magnet-Reedkontakt-Set Fremdmagnet geschützt, zum Aufschrauben und Einbohren. Inhalt: 1 Magnet 8 mm Ø, 1 Reedkontakt 8 mm Ø, mit 4,0 m Anschlusskabel LIYY 4 x 0,14 mm2, 2 Gehäuse, 4 Distanzplatten, 2 Flansche, 4 Befestigungsschrauben anti magnetisch. Maße: H x B x T = 15 x 43 x 12 mm
6159
MRSS/W MAGNET-REEDKONTAKT SET ALARMS CENTRAL
6160 RTK/C ROLLTOR-MAGNET-REEDKONTAKT - VdS für Klasse C ALARMS CENTRAL
Rolltor-Magnet-Reedkontakt zur Öffnungsüberwachung von Rolltoren oder anderen großen Toren im industriellen Bereich. Inhalt: 1 Magnet, 1 Reedkontakt mit 2 m Anschlusskabel 4 x 0,14 mm2, 1 m Schutzschlauch 1 Satz Montage zubehör. Maße: H x B x T: Reedkontakt 159 x 50 x 19 mm; Magnet 100 x 40 x 35 mm; Schutzart: IP 68; Umweltklasse nach VdS III
6160
RTK/C ROLLTOR-MAGNET-REEDKONTAKT - VDS FÜR KLASSE C ALARMS CENTRAL
6161 SWM4/RN Water Detector 12V with Relay Output ALARMS CENTRAL
The water detector is used to detect water ingress, e.g., pipe fractures, seepage of groundwater and sewage. Draws power from an external voltage source (10 to 23 V DC). Output: Potential free changeover contact. The detector resets itself automatically.
6161
SWM4/RN WATER DETECTOR 12V WITH RELAY OUTPUT ALARMS CENTRAL
6162 SMKG HOCHLEISTUNGS-MAGNET-REEDKONTAKT ALARMS CENTRAL
Hochleistungs-Magnet-Reedkontakt für Garagentore und schwere Metalltüren (Magnet- und Reedkontakt), Reedkontakt mit 4,0 m Anschlusskabel LIYY 4 x 0,14 mm2. Maße: H x B x T = 15 x 14,5 x 72 mm
6162
SMKG HOCHLEISTUNGS-MAGNET-REEDKONTAKT ALARMS CENTRAL
8535 LF/U 2.1 Light Sensor, FM SENSORS
The light sensor is used to measure the brightness level in rooms. When combined with the light controller LR/S x.16.1 (x = 2 or 4) the light sensor is used for constant light control.

8535
LF/U 2.1 LIGHT SENSOR, FM SENSORS
9138 LMRS LEISTUNGS MAGNET REEDKONTAKT SET ALARMS CENTRAL
Leistungs-Magnetkontakt LMRS Montageart Aufbau/Einbau, VdS Klasse ohne, Leistungs-Magnet-Reedkontakt 230V, für die Steuerung eines 230V AC Relais. Wechselkontakt.
9138
LMRS LEISTUNGS MAGNET REEDKONTAKT SET ALARMS CENTRAL
9139 WRK Lock Bolt Switching Contact - indoor. ALARMS CENTRAL
Riegelschaltkontakt zum Einbau in ein Schließblech zur Verschlußüberwachung von Türen und Fenstern. Ohne Anschlusskabel.
9139
WRK LOCK BOLT SWITCHING CONTACT - INDOOR. ALARMS CENTRAL
10507 SD/M 2.6.2 Switch/Dim Actuator Module, 2-fold, 6 AX ACTUATORS - OUTPUTS
Module for plugging into the Room Controller Basis Device. It enables the switching and dimming of two groups of luminaires in connection with electronic ballasts via a 1-10 V control voltage. High switching capacity.
10507
SD/M 2.6.2 SWITCH/DIM ACTUATOR MODULE, 2-FOLD, 6 AX ACTUATORS - OUTPUTS
10508 LR/M 1.6.2 Light Controller Module, 1-fold, 6 AX ACTUATORS - OUTPUTS
Enables the switching and dimming of one group of luminaires via a 1...10 V control voltage. The device can be used for constant lighting control in connection with a Light Sensor LF/U 2.1.
10508
LR/M 1.6.2 LIGHT CONTROLLER MODULE, 1-FOLD, 6 AX ACTUATORS - OUTPUTS
10509 SA/M 2.16.1 Switch Actuator Module, 2-fold, 16 A, Floating Contact ACTUATORS - OUTPUTS
Switches up to 16 A with two floating relay contacts. The feeding voltage is independent from the Room Controller Basis Device. It must thus be applied directly to the module.
10509
SA/M 2.16.1 SWITCH ACTUATOR MODULE, 2-FOLD, 16 A, FLOATING CONTACT ACTUATORS - OUTPUTS
12114 PG/U 1.1 priOn Grundträger, 1 fach SIN FAMILIA


zur Kontaktierung der priOn Komponenten mit dem Busankoppler. Der 1f Träger dient zur Aufnahme von 1f und 3f Bedienelementen sowie den Abschlussleisten. Der 2f und 3f Träger kontaktiert zusätzlich das 3,5‘‘ FTF-Display mit Drehbedienelement.

12114
PG/U 1.1 PRION GRUNDTRÄGER, 1 FACH SIN FAMILIA
12115 PG/U 2.1 priOn Grundträger, 2 fach SIN FAMILIA


zur Kontaktierung der priOn Komponenten mit dem Busankoppler. Der 1f Träger dient zur Aufnahme von 1f und 3f Bedienelementen sowie den Abschlussleisten. Der 2f und 3f Träger kontaktiert zusätzlich das 3,5‘‘ FTF-Display mit Drehbedienelement.

12115
PG/U 2.1 PRION GRUNDTRÄGER, 2 FACH SIN FAMILIA
12116 PG/U 3.1 Base Busch-priOn 3 canales SIN FAMILIA


zur Kontaktierung der priOn Komponenten mit dem Busankoppler. Der 1f Träger dient zur Aufnahme von 1f und 3f Bedienelementen sowie den Abschlussleisten. Der 2f und 3f Träger kontaktiert zusätzlich das 3,5‘‘ FTF-Display mit Drehbedienelement.

12116
PG/U 3.1 BASE BUSCH-PRION 3 CANALES SIN FAMILIA
12117 PB/U 1.3.1 Control key Busch-priOn, 1 fold PUSH BUTTONS

Bedienelement, Busch-priOnR

frei programmierbares Multifunktions-Bedienelement zum Einbau in den Grundtrager 1fach,

2fach oder 3fach. Unterstutzung der KNX-Funktionen durch innovatives Farbkonzept an den

Beschriftungssymbolen oder Standardbeleuchtung rot/grun.

12117
PB/U 1.3.1 CONTROL KEY BUSCH-PRION, 1 FOLD PUSH BUTTONS
12121 PDB/U 1.3.1 ABB i-Bus KNX Prion PDB/U1.3.1, glas SB PUSH BUTTONS

Drehbedienelement, 1fach, Busch-priOnR frei programmierbares Multifunktions-Drehbedienelement zum Einbau in den Grundtrager 1fach, 2fach oder 3fach. Unterstutzung der KNX-Funktionen durch innovatives Farbkonzept am Drehknopf oder Standardbeleuchtung rot/grun. Drehknopf aus Edelstahl.

12121
PDB/U 1.3.1 ABB I-BUS KNX PRION PDB/U1.3.1, GLAS SB PUSH BUTTONS
12123 PAO/Z 1.3.1 TOP END STANDARD BAR BUSCH-PRION PUSH BUTTONS
Abschlussleisten - Busch-priOn Zur Montage an Grundträger 1fach bis 3fach.
12123
PAO/Z 1.3.1 TOP END STANDARD BAR BUSCH-PRION PUSH BUTTONS
12126 PAU/Z 1.3.1 BOTTOM END STANDARD BAR WITH BUSCH-JAEGER LETTERING, BUSCH PRION PUSH BUTTONS
Lower end bar for mounting on base support x1, x2 and x3 (6346 / 10, 6346 / 11 and 6346 / 12).

Dimensions (H x W x D): 12, 5 mm x 106, 6 mm x 15, 5 mm
12126
PAU/Z 1.3.1 BOTTOM END STANDARD BAR WITH BUSCH-JAEGER LETTERING, BUSCH PRION PUSH BUTTONS
12130 PTU/K 1.3.1 Abschlussleiste unten, mit Temperaturfühler, Busch-priOn® PUSH BUTTONS

Abschlussleiste unten, mit Temperaturfuhler, Busch-priOnR zur Montage an Grundtrager 1fach bis 3fach. Stellt den uber den Temperaturfuhler ge messenen

Wert fur das 3,5" TFT-Farbdisplay oder den Raumtemperatur regler zur Verfugung.

12130
PTU/K 1.3.1 ABSCHLUSSLEISTE UNTEN, MIT TEMPERATURFÜHLER, BUSCH-PRION® PUSH BUTTONS
12745 A43 512-100 Electricity meter, 3 phase, Active/Reactive energy, direct conected 80 A, platinum SMART METERING
Contador de corriente trifásica, trifásico (3 + N)
Medidor directo 80A, ancho 7 módulos DIN, con interfaz de infrarrojos
Medición de energía activa y reactiva (contador de dos direcciones para suministro/consumo)
Comprobado y autorizado según MID
Autorización IEC
12745
A43 512-100 ELECTRICITY METER, 3 PHASE, ACTIVE/REACTIVE ENERGY, DIRECT CONECTED 80 A, PLATINUM SMART METERING
12758 A42 553-120 Electricity meter, 1 phase, Active/Reactive energy, 4 inputs/outputs configurable, Platium SMART METERING

Wandlermessung 1(6) A, mit infrarotschnittstelle

Geprüft und zugelassen gemäB MID und IEC

12758
A42 553-120 ELECTRICITY METER, 1 PHASE, ACTIVE/REACTIVE ENERGY, 4 INPUTS/OUTPUTS CONFIGURABLE, PLATIUM SMART METERING
12759 A41 513-100 Electricity meter, 1 phase, Active/Reactive energy, 80A SMART METERING
Electricity meter, 1 phase, Active/Reactive energy, 80A
12759
A41 513-100 ELECTRICITY METER, 1 PHASE, ACTIVE/REACTIVE ENERGY, 80A SMART METERING
12777 A44 552-100 Electricity meter 1 (6A), 3 phase+ N, Active/Reactive energy, 4 inputs/outputs configurable, Platium SMART METERING
Electricity meter 1 (6A), 3 phase+ N, Active/Reactive energy, 4 inputs/outputs configurable, Platium
12777
A44 552-100 ELECTRICITY METER 1 (6A), 3 PHASE+ N, ACTIVE/REACTIVE ENERGY, 4 INPUTS/OUTPUTS CONFIGURABLE, PLATIUM SMART METERING
12792 FW/S 8.2.1 Radio Time Switch 8-channnel, MDRC TIME TRANSMITTERS - SWITCHES
The Radio Time Switch sends current time and date on the bus. The time can be optionally received via a DCF or GPS antenna. Furthermore the device can be used to easily adjust the time programs.
12792
FW/S 8.2.1 RADIO TIME SWITCH 8-CHANNNEL, MDRC TIME TRANSMITTERS ...
12793 FAD/A 1.1 DCF Antenna for Radio Time Switch TIME TRANSMITTERS - SWITCHES
For the connection to the Radio Tme Switch FW/S 8.2.1. The time signal from the DCF 77 transmitter can be received within a radius of approx. 1000 km around Frankfurt.
12793
FAD/A 1.1 DCF ANTENNA FOR RADIO TIME SWITCH TIME TRANSMITTERS ...
12794 FAG/A 1.1 GPS Antenna for Radio Time Switch TIME TRANSMITTERS - SWITCHES
For the connection to the Radio Time Switch FW/S 8.2.1. The device receives time and date via GPS signal which is available worldwide.
12794
FAG/A 1.1 GPS ANTENNA FOR RADIO TIME SWITCH TIME TRANSMITTERS ...
12795 VB/K 360.1 Wiring Jumper, 360mm KNX ACCESSORIES
For the interconnection of devices with a bus connection terminal on the front of the device. Prefabricated jumpers for connecting the devices vertically. Length 360mm.
12795
VB/K 360.1 WIRING JUMPER, 360MM KNX ACCESSORIES
13062 EIM/KB Movement detector, 15m, vds B DETECTORS
Bewegungsmelder mit 2 Detektionsprinzipien zur erhöhten Falschalarm Sicherheit, auch bei kritischen Umgebungsbedingungen. 15m Reichweite, Abstrahlwinkel 90°, 19 Zonen in 3 Ebenen, versiegelte Optik. Farbe: Reinweiß
13062
EIM/KB MOVEMENT DETECTOR, 15M, VDS B DETECTORS
13068 FC650/TMAX Thermal Maximum Detector ALARMS CENTRAL
FC650/TMAX Thermal Max. Detector from Series FC650 with an Alarm temperature of 78 °C
13068
FC650/TMAX THERMAL MAXIMUM DETECTOR ALARMS CENTRAL
13069 FC600/BR Detector Base SIN FAMILIA
FC600/BR Detector Base for connecting detectors from series FC600/FC650 to Fire Alarm Panels
13069
FC600/BR DETECTOR BASE SIN FAMILIA
13090 FC650/O Optical Smoke Detector ALARMS CENTRAL
Optical smoke detector in threshold alarm technology that detects smoke according to the scattered-light principle. The detectors feature an alarm indicator on the detector head that is visible from all angles, and which can be triggered with a permament magnet for test purposes. A detector base is provided for mounting and cable connection purposes into with an detector is simply screwed in via the bayonet connection. Each detector is equipped with an alarm LED, which displays the storeda alarm in the event of an a alarm. Detector/base diameter: 110 mm. Vds approved.

 

13090
FC650/O OPTICAL SMOKE DETECTOR ALARMS CENTRAL
13346 PS 1/4/6-KNX Busbar, 1 Phase, 4 contacts SIN FAMILIA
The busbar enable fast and fault-free wiring of the load side of the ABB i-bus® modular installation devices and accordingly reduce the wiring effo
13346
PS 1/4/6-KNX BUSBAR, 1 PHASE, 4 CONTACTS SIN FAMILIA
13347 PS 1/60/6-KNX Busbar, 1 Phase, 60 contacts SIN FAMILIA
The busbar enable fast and fault-free wiring of the load side of the ABB i-bus® modular installation devices and accordingly reduce the wiring effo
13347
PS 1/60/6-KNX BUSBAR, 1 PHASE, 60 CONTACTS SIN FAMILIA
13366 LFO/A 1.1 Outside Light Sensor for HS/S 4.2.1 SENSORS
Outside Light Sensor for the connection with the Interface HS/S 4.2.1
13366
LFO/A 1.1 OUTSIDE LIGHT SENSOR FOR HS/S 4.2.1 SENSORS
13390 A43 211-100 Counter meter Three phase 3-phase (3 + N), direct measurement, 80 A, MDRC, 2 outputs, 2 inputs SMART METERING
Funktionen abhängig vom Typ: Zweirichtungszähler, Wirk-/Blindenergiemessung, Messwerte, Zwischenzähler, Tarife, E/A, Alarm, Uhr, Ereignis- u. Wertespeicher, Min./Max. Werte, Lastprofil, Harmonische, Schnittstellen: IR, M-Bus, ModBus (RS-485). MID, IEC.
13390
A43 211-100 COUNTER METER THREE PHASE 3-PHASE (3 + N), DIRECT MEASUREMENT, 80 A, MDRC, 2 OUTPUTS, 2 INPUTS SMART METERING
13706 6186/01 UP-500 Power adapter module TP for Busch-ComfortTouch(R)/xx SYSTEM DEVICES

Power adapter for the power supply of Busch-ComfortTouch(R) 8136/09-… and 8136/12-…. With integrated KNX bus coupler for the establishment of the local bus connection to the ABB i-bus(R) KNX. With integrated audio outputs (LineOut).
13706
6186/01 UP-500 POWER ADAPTER MODULE TP FOR BUSCH-COMFORTTOUCH(R)/XX SYSTEM DEVICES
13707 8136/01 UP-500 Flush-mounted installation box for Busch-ComfortTouch VISUALIZATION

 

For flush-mounted und hollow-wall installation of the Busch-ComfortTouch® 8136/09- ... , 8136/12- ... or the SMARTtouch.
Windproof.


Dimensions: (L x W x D): 163.5 mm x 199 mm x 60 mm
Mounting depth: 60 mm

13707
8136/01 UP-500 FLUSH-MOUNTED INSTALLATION BOX FOR BUSCH-COMFORTTOUCH VISUALIZATION
13708 CP-D24/2.5 MDRC power pack 2500 mA SELV SYSTEM DEVICES
For Busch-priOn® power bus coupler 6120/13-500.


Rated voltage: 240 V~
Output voltage: 24 V-, +1% / -1%
Rated frequency: 47 Hz - 63 Hz



Rated current: 2500 mA

Protection class (Device): IP 20
Temperature range (Device): -20 °C to 70 °C


Dimensions: (L x W x D): 91 mm x 71 mm x 57.5 mm
Module width: 4 MW
13708
CP-D24/2.5 MDRC POWER PACK 2500 MA SELV SYSTEM DEVICES
13710 A41 311-100 Energy meter, direct measurement 80A, 1 phase (1 + N) SMART METERING

 

13710
A41 311-100 ENERGY METER, DIRECT MEASUREMENT 80A, 1 PHASE (1 + N) SMART METERING
13755 BM/A 2.1.1 Outdoor Motion Detector, 16m, 220° DETECTORS

Guard sensor for wall mounting with integrated KNX bus coupling unit (IP55).

With 4 motion channels, 1 twilight channel with 3 switching thresholds, 1 temperature channel with

3 switching thresholds and 7 channels for IR remote control.

Surveillance density: 92 sectors with 368 switch segments, twilight sensor: approx. 1 - 1,000 lux, brightness sensor approx. 1 - 80 kLux. Switch - off delay: approx. 10 sec

BM / A 2.1.1 1092 min, sensor angle: 220 °, range: 16 m

13755
BM/A 2.1.1 OUTDOOR MOTION DETECTOR, 16M, 220° DETECTORS
15888 DS201A-C32/0,03 Combination switch differential 1F + N, C 32, 30mA SIN FAMILIA
The DS201 series RCBO is a 1P+N in two-modules device for the protection of end user single-phase circuits against overload and short-circuit currents; protection against the effects of sinusoidal alternating and direct pulsating earth fault currents; protection against indirect contacts and additional protection against direct contacts (with sensitivity = 30 mA).
15888
DS201A-C32/0,03 COMBINATION SWITCH DIFFERENTIAL 1F + N, C 32, 30MA SIN FAMILIA
16536 WES/A 3.1 Weather Sensor, SM SENSORS
The device detect wind speed, rain, brightness in 3 directions, twilight, temperature, day/night an over the GPS signal date and time. An additional heating transformer is not needed.
16536
WES/A 3.1 WEATHER SENSOR, SM SENSORS
17244 A43 413-100 Electricity meter, 3 phase, 80A, Active and reactive energy, import/export, tariffs 1-4, tariff controlled via inputs, communication or clock SMART METERING
Active and reactive energy, import/export, tariffs 1-4, tariff controlled via inputs, communication or clock, previous values, max and min demand.
17244
A43 413-100 ELECTRICITY METER, 3 PHASE, 80A, ACTIVE AND REACTIVE ENERGY, IMPORT/EXPORT, TARIFFS 1-4, TARIFF CONTROLLED VIA INPUTS, COMMUNICATION OR CLOCK SMART METERING
18091 BT/A 1.1 Control Keypad for GM / A 8.1 KNX Alarms ALARMS CENTRAL

The BT/A 1.1 Keypad is used to operate and display the GM/A 8.1 KNX Security  Panel. The display is used to show information about system states.  The multifunction and special keys mean that all the system functions can be  operated easily.  Safety-relevant functions are protected by a user PIN.  Commissioning is performed via the web server of the KNX Security Panel.  The Keypad meets the VdS guidelines for class A, B, and C, as well as  DIN EN 50 131 Grades 1-3 and ISO/IEC 62 642 Grades 1-3.
 

Applications:
 
 - Connection of up to 5 Keypads via the Security Bus (S-Bus 3) - Display of the triggered detectors in text and LED - Display of alarms and faults in text and LED - Alarming via integrated buzzer - Internal, external and delayed setting possible - Control of disable groups for detectors - Display of history (central and 8 entry doors)

 Color: Black or white with chrome end caps
 Protection type: IP 30 to DIN EN 60 529
 Mounting: Surface-mounted device (AP)/   Flush-mounted device (UP)
 Dimensions (H x W x D): 237 x 117 x 22 mm

18091
BT/A 1.1 CONTROL KEYPAD FOR GM / A 8.1 KNX ALARMS ALARMS CENTRAL
18114 MG/E 4.4.1 4 zones module for GM/A 8.1 alarm system centralized installation ALARMS CENTRAL
To connect to Security Panel GM/A 8.1 via the Security-Bus. For expansion of the Security-Panel by 4 detector zones. Used for connection to the exterior perimeter detectors such as magnetic reed contacts and passive glass break sensors. The module has 4 zones
18114
MG/E 4.4.1 4 ZONES MODULE FOR GM/A 8.1 ALARM SYSTEM CENTRALIZED INSTALLATION ALARMS CENTRAL
18675 AA/S4.1.2 Analouge Actuator, 4-fold ACTUATORS - OUTPUTS

    The Analogue Actuator converts KNX telegrams in voltage (0...10V) or current (0…24mA) signals. These analogue output signals are used to influence regulatory processes. For example, devices for heating, air conditioning or ventilation applications can be adjusted in their operation depending on the information, which are transmitted via the bus system. This Analogue Actuator is a 4-fold DIN rail device. The ABB i-bus Tool is supported for advanced diagnosis and improved commissioning.
18675
AA/S4.1.2 ANALOUGE ACTUATOR, 4-FOLD ACTUATORS - OUTPUTS
18676 AA/A 2.1.2 Analog actuator, 2 channels, AP, 0-10 V ACTUATORS - OUTPUTS
The analogue actuator transforms the telegrams received by
KNX on analog output signals. The appliance has
2 outputs. The analogue outputs can be used
independent of each other as voltage outputs with signals
outputs.
The analog actuator is a surface apparatus. The connection to the
KNX is set via a bus connection terminal.
The device is parameterized and programmed with the ETS.
The power supply is via the KNX bus.
18676
AA/A 2.1.2 ANALOG ACTUATOR, 2 CHANNELS, AP, 0-10 V ACTUATORS - OUTPUTS
18678 SRZ/U 1.1.1 Cover for SRO/U 1.1.2 CLIMATE CONTROL
Cover for SRO/U 1.1.2
18678
SRZ/U 1.1.1 COVER FOR SRO/U 1.1.2 CLIMATE CONTROL
18687 FCA/S 1.1.1.2 Fan Coil Actuator.3 channel, PWM, MDRC CLIMATE CONTROL
Control typical fan coil units by four electronic outputs for thermoelectric or motor-driven valve drives and a 3 channel output for a fan with up to 3 stages. Also a additional load (up to 16 A) like a auxiliary heating can be controlled by a switch output. Window sensors, condensed water sensors and temperature sensors can be connected to the three universal inputs. The Fan Coil Actuator supports the ABB i-bus Tool for advanced diagnosis and improved commissioning.
18687
FCA/S 1.1.1.2 FAN COIL ACTUATOR.3 CHANNEL, PWM, MDRC CLIMATE CONTROL


KNX SPECIAL CATALOGUES
Different looks for KNX push buttons
Push buttons
Smart metering
Iddero Verso Interactive Presentation

LEARN
Free webinars
uBrick Tutorials
VideoTutorials CBSE


PARTICIPATE
µBrick Trivia
KNX Tips & tricks
TEST
Free test of CBSE visualization

LATEST KNX NEWS
All news

LATEST KNX OFFERS
All offers
DOWNLOADS
KNX - All brands

FUTURASMUS KNX GROUP
Contact
Location
Futurasmus in the world
FOLLOW US
YouTube Channel
Facebook
LinkedIN
Google+
Twitter

KNX++ TRAINING CENTER
Futurasmus Zentrum

CERTIFIED KNX TEST LAB
Futurasmus KNX Lab
SPECIALIZED KNX WHOLESALER CERTIFIED KNX TRAINING CENTRE
Futurasmus KNX Group is a highly specialized and internationally active KNX Wholesaler, being our forte the excellent technical support we provide. You can visit our online catalogue in this website and, if you are a professional, ask for a non binding offer for your KNX projects. Should you be interested in buying KNX components, you are welcome to read our General Sales Conditions and contact our technicians and commercial agents per telephone, e-mail or online help. Since 2003 we have been a Certified Training Centre KNX++, which means that we are entitled to impart the KNX Basic Course as well as the KNX Advanced Course and KNX Tutor Course. We are manufacturer-independent and also offer other specialized and monographic KNX seminars. After teaching more than 1.500 KNX partners, our KNX Trainers have quite a large and positive expertise. Please, contact us for customized KNX training worldwide (groups of at least 8 people) at training@futurasmus-knxgroup.org
USE OF COOKIES
We use our own and third-party cookies, analyzing your browsing habits in out website, with the finality of ensuring the quality, security and improvement of the offered services through the same. In the case that the user does not explicitly state whether to accept the installation of cookies, but continues using our website, it will mean that he has consented expressly, informing him about the possibility to block or remove the installed cookies on his computer by configuring the appropriate settings of the browser. You can get more information on this subject reading our "Cookies Policy".