Order by:   Filter results: 
Web Code Reference Description Category Price
17171 ITR504-16A-01 4 Channel Knx Combo Switch Actuator, 16A, 6U ACTUATORS - OUTPUTS

The combo actuator is a KNX certified device available with 4, 8, 12, 16, 20 and 24 channels.

Modules are supplied over KNX bus and do not need any other external power supply.

The communication of the devices via the KNX bus enables information exchanges with KNX sensors and the integration with a building management system.

Outputs of combo module can be configured to different functionalities depending on the project needs, therefore supports many combinations.

CONFIGURATION
The complete configuration of the device is performed via ETS3 or higher.
Depending on the ETS configuration and settings the product feature will be different.

FUNCTIONS
- Lighting.
- Heating.
- Shutter and Blind.
- Shutter and Blind 24V.
- Fan Coil 2 pipes.
- Fan Coil 4 pipes.

The functionalities for each output include among other things timing functions, logic gates, scenes, disabling function, forced, working hours counter, periodical monitoring and different configurations for feedback telegrams.

Last situation memory against power failure.

17171
ITR504-16A-01 4 CHANNEL KNX COMBO SWITCH ACTUATOR, 16A, 6U ACTUATORS - OUTPUTS
17172 ITR508-16A-02 8 Channel Knx Combo Switch Actuator, 16A, 6U ACTUATORS - OUTPUTS

The combo actuator is a KNX certified device available with 4, 8, 12, 16, 20 and 24 channels.

Modules are supplied over KNX bus and do not need any other external power supply.

The communication of the devices via the KNX bus enables information exchanges with KNX sensors and the integration with a building management system.

Outputs of combo module can be configured to different functionalities depending on the project needs, therefore supports many combinations.

CONFIGURATION
The complete configuration of the device is performed via ETS3 or higher.
Depending on the ETS configuration and settings the product feature will be different.

FUNCTIONS
- Lighting.
- Heating.
- Shutter and Blind.
- Shutter and Blind 24V.
- Fan Coil 2 pipes.
- Fan Coil 4 pipes.

The functionalities for each output include among other things timing functions, logic gates, scenes, disabling function, forced, working hours counter, periodical monitoring and different configurations for feedback telegrams.

Last situation memory against power failure.

17172
ITR508-16A-02 8 CHANNEL KNX COMBO SWITCH ACTUATOR, 16A, 6U ACTUATORS - OUTPUTS
17173 ITR512-16A-02 12 Channel Knx Combo Switch Actuator, 16A, 10U ACTUATORS - OUTPUTS

The combo actuator is a KNX certified device available with 4, 8, 12, 16, 20 and 24 channels.

Modules are supplied over KNX bus and do not need any other external power supply.

The communication of the devices via the KNX bus enables information exchanges with KNX sensors and the integration with a building management system.

Outputs of combo module can be configured to different functionalities depending on the project needs, therefore supports many combinations.

CONFIGURATION
The complete configuration of the device is performed via ETS3 or higher.
Depending on the ETS configuration and settings the product feature will be different.

FUNCTIONS
- Lighting.
- Heating.
- Shutter and Blind.
- Shutter and Blind 24V.
- Fan Coil 2 pipes.
- Fan Coil 4 pipes.

The functionalities for each output include among other things timing functions, logic gates, scenes, disabling function, forced, working hours counter, periodical monitoring and different configurations for feedback telegrams.

Last situation memory against power failure.

17173
ITR512-16A-02 12 CHANNEL KNX COMBO SWITCH ACTUATOR, 16A, 10U ACTUATORS - OUTPUTS
17174 ITR516-16A-01 16 Channel Knx Combo Switch Actuator, 16A, 10U ACTUATORS - OUTPUTS

The combo actuator is a KNX certified device available with 4, 8, 12, 16, 20 and 24 channels.

Modules are supplied over KNX bus and do not need any other external power supply.

The communication of the devices via the KNX bus enables information exchanges with KNX sensors and the integration with a building management system.

Outputs of combo module can be configured to different functionalities depending on the project needs, therefore supports many combinations.

CONFIGURATION
The complete configuration of the device is performed via ETS3 or higher.
Depending on the ETS configuration and settings the product feature will be different.

FUNCTIONS
- Lighting.
- Heating.
- Shutter and Blind.
- Shutter and Blind 24V.
- Fan Coil 2 pipes.
- Fan Coil 4 pipes.

The functionalities for each output include among other things timing functions, logic gates, scenes, disabling function, forced, working hours counter, periodical monitoring and different configurations for feedback telegrams.

Last situation memory against power failure.

17174
ITR516-16A-01 16 CHANNEL KNX COMBO SWITCH ACTUATOR, 16A, 10U ACTUATORS - OUTPUTS
17175 ITR520-16A-01 20 Channel Knx Combo Switch Actuator, 16A, ACTUATORS - OUTPUTS

The combo actuator is a KNX certified device available with 4, 8, 12, 16, 20 and 24 channels.

Modules are supplied over KNX bus and do not need any other external power supply.

The communication of the devices via the KNX bus enables information exchanges with KNX sensors and the integration with a building management system.

Outputs of combo module can be configured to different functionalities depending on the project needs, therefore supports many combinations.

CONFIGURATION
The complete configuration of the device is performed via ETS3 or higher.
Depending on the ETS configuration and settings the product feature will be different.

FUNCTIONS
- Lighting.
- Heating.
- Shutter and Blind.
- Shutter and Blind 24V.
- Fan Coil 2 pipes.
- Fan Coil 4 pipes.

The functionalities for each output include among other things timing functions, logic gates, scenes, disabling function, forced, working hours counter, periodical monitoring and different configurations for feedback telegrams.

Last situation memory against power failure.

17175
ITR520-16A-01 20 CHANNEL KNX COMBO SWITCH ACTUATOR, 16A, ACTUATORS - OUTPUTS
17176 ITR524-16A-01 24 Channel Knx Combo Switch Actuator, 16A, ACTUATORS - OUTPUTS

The combo actuator is a KNX certified device available with 4, 8, 12, 16, 20 and 24 channels.

Modules are supplied over KNX bus and do not need any other external power supply.

The communication of the devices via the KNX bus enables information exchanges with KNX sensors and the integration with a building management system.

Outputs of combo module can be configured to different functionalities depending on the project needs, therefore supports many combinations.

CONFIGURATION
The complete configuration of the device is performed via ETS3 or higher.
Depending on the ETS configuration and settings the product feature will be different.

FUNCTIONS
- Lighting.
- Heating.
- Shutter and Blind.
- Shutter and Blind 24V.
- Fan Coil 2 pipes.
- Fan Coil 4 pipes.

The functionalities for each output include among other things timing functions, logic gates, scenes, disabling function, forced, working hours counter, periodical monitoring and different configurations for feedback telegrams.

Last situation memory against power failure.

17176
ITR524-16A-01 24 CHANNEL KNX COMBO SWITCH ACTUATOR, 16A, ACTUATORS - OUTPUTS
17178 ITR102 2 gang push button interface INPUTS

The binary input module is a KNX certified device available with 2, 4 and 6 inputs.

CONFIGURATION
The complete configuration of the device is performed via ETS3 or higher.
Depending on the ETS configuration and settings the product feature will be different.

FUNCTIONS
- Switching commands
- Toggle commands
- Dimming
- Blind Control
- Value selected
- 2 Channel Mode

17178
ITR102 2 GANG PUSH BUTTON INTERFACE INPUTS
17179 ITR104 4 gang push button interface INPUTS

The binary input module is a KNX certified device available with 2, 4 and 6 inputs.

CONFIGURATION
The complete configuration of the device is performed via ETS3 or higher.
Depending on the ETS configuration and settings the product feature will be different.

FUNCTIONS
- Switching commands
- Toggle commands
- Dimming
- Blind Control
- Value selected
- 2 Channel Mode

17179
ITR104 4 GANG PUSH BUTTON INTERFACE INPUTS
17180 ITR106 6 gang push button interface INPUTS

The binary input module is a KNX certified device available with 2, 4 and 6 inputs.

CONFIGURATION
The complete configuration of the device is performed via ETS3 or higher.
Depending on the ETS configuration and settings the product feature will be different.

FUNCTIONS
- Switching commands
- Toggle commands
- Dimming
- Blind Control
- Value selected
- 2 Channel Mode

17180
ITR106 6 GANG PUSH BUTTON INTERFACE INPUTS
17304 ITR-110-0104 Interra 10.1'' Touch Panel-KNX VISUALIZATION

Interra 10,1'' i4 Touch-Panel, the choice of the ones in search of a product that inherits hardware, software and interface capable of responding all projects with a modern design, is able to be used in every kind of space and surface. This system that provides the most convenient solutions to all needs in smart-buildings combines comfort with ease and creates difference.


Power Supply  : 12 V 1.2A
Power Consumption  :  3 W (nominal) - 10W (max)
Cpu  :  ARM® Cortex?-A7 Dual-Core  2 x 1.2 GHz
Memory  :  Min 1 GB  DDR3
Storage  :  Min 8 GB with EMMC (sandisk) disc technology
KNX  :  Certificated by KNX.org
OS  :  Android 4.2.2 / Linux (Debian / Ubuntu / Fedora / Linaro )
USB  :  2x USB-HOST with USB2.0 spec, 1xUSB-OTG
RTC  :  System includes RTC with CR1220 battery
SDCard  :  Standard SD-TF card connector up to 64Gbyte storage
Ethernet  :  100Mbps
USB WIFI   : Supported

17304
ITR-110-0104 INTERRA 10.1'' TOUCH PANEL-KNX VISUALIZATION
17440 ITR-107-0104 Interra 7'' Touch Panel-KNX VISUALIZATION

Interra 7" i4 Touch-Panel, the choice of the ones in search of a product that inherits hardware, software and interface capable of responding all projects with a modern design, is able to be used in every kind of space and surface. This system that provides the most convenient solutions to all needs in smart-buildings combines comfort with ease and creates difference.


Power Supply  : 12 V 1.2A
Power Consumption  :  3 W (nominal) - 10W (max)
Cpu  :  ARM® Cortex?-A7 Dual-Core  2 x 1.2 GHz
Memory  :  Min 1 GB  DDR3
Storage  :  Min 8 GB with EMMC (sandisk) disc technology
KNX  :  Certificated by KNX.org
OS  :  Android 4.2.2 / Linux (Debian / Ubuntu / Fedora / Linaro )
USB  :  2x USB-HOST with USB2.0 spec, 1xUSB-OTG
RTC  :  System includes RTC with CR1220 battery
SDCard  :  Standard SD-TF card connector up to 64Gbyte storage
Ethernet  :  100Mbps
USB WIFI   : Supported

17440
ITR-107-0104 INTERRA 7'' TOUCH PANEL-KNX VISUALIZATION
17600 ITR-212-0002 Interra 12 I/O Modul without sensor, NO KNX ACTUATORS - OUTPUTS

EIO product, that runs integrated with Hotel Management System, provides solutions needed at hotels.
EIO product has 12 inputs and 12 outputs. EIO product can be added with sensor modules dedicated to temperature, humidity, water, and flood conditions. EIO product can run as stand-alone, or in an IP-network along with Interra Touch-Panel and Interra Server SW solutions. All I/Os can be modified according to project's requirements. Combinations of I/Os are controlled through logic operators. 

Time controls could also be made through pre-time and post-time structuring.

FUNCTIONS
• Lighting.
• Heating.
• Curtains-Blinds
• Curtains-Blinds 24V.
• Fan Coil 2 conduits.
• Fan Coil 4 conduits

17600
ITR-212-0002 INTERRA 12 I/O MODUL WITHOUT SENSOR, NO KNX ACTUATORS - OUTPUTS
19056 ITR-300-0000 Iswitch body gateway PUSH BUTTONS
Main unit with BCU Main unit with knx gateway (interface and communication part, BCU. This part has mounting holes for fixing in standart electrical box- 1 gang-.This part is designed to be used in all models.)
19056
ITR-300-0000 ISWITCH BODY GATEWAY PUSH BUTTONS
19057 ITR-301-0001 COVER 1 KEY Iswitch one button black plastic PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

 

19057
ITR-301-0001 COVER 1 KEY ISWITCH ONE BUTTON BLACK PLASTIC PUSH BUTTONS
19062 ITR-301-0100 COVER 1 KEY Iswitch one button natural aluminium eloxal mat unbrashed PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

 

19062
ITR-301-0100 COVER 1 KEY ISWITCH ONE BUTTON NATURAL ALUMINIUM ELOXAL MAT UNBRASHED PUSH BUTTONS
19065 ITR-301-0200 COVER 1 KEY Iswitch one button natural stainless steel PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

 

19065
ITR-301-0200 COVER 1 KEY ISWITCH ONE BUTTON NATURAL STAINLESS STEEL PUSH BUTTONS
19066 ITR-301-0301 COVER 1 KEY Iswitch one button GlassEF PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

 

19066
ITR-301-0301 COVER 1 KEY ISWITCH ONE BUTTON GLASSEF PUSH BUTTONS
19080 ITR-302-0200 COVER 2 KEY Iswitch two button natural stainless steel PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

19080
ITR-302-0200 COVER 2 KEY ISWITCH TWO BUTTON NATURAL STAINLESS STEEL PUSH BUTTONS
19082 ITR-302-0301 COVER 2 KEY Iswitch two button GlassEF PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

19082
ITR-302-0301 COVER 2 KEY ISWITCH TWO BUTTON GLASSEF PUSH BUTTONS
19083 ITR-304-0001 COVER 4 KEY Iswitch four button black plastic PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

19083
ITR-304-0001 COVER 4 KEY ISWITCH FOUR BUTTON BLACK PLASTIC PUSH BUTTONS
19104 ITR-304-0100 COVER KEY Iswitch 4 button natural aluminium eloxal mat unbrashed PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

 

19104
ITR-304-0100 COVER KEY ISWITCH 4 BUTTON NATURAL ALUMINIUM ELOXAL MAT UNBRASHED PUSH BUTTONS
19113 ITR-304-0200 COVER 4 KEY Iswitch button natural stainless steel PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

19113
ITR-304-0200 COVER 4 KEY ISWITCH BUTTON NATURAL STAINLESS STEEL PUSH BUTTONS
19114 ITR-304-0301 COVER 4 KEY Iswitch button black GlassEF PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

19114
ITR-304-0301 COVER 4 KEY ISWITCH BUTTON BLACK GLASSEF PUSH BUTTONS
19115 ITR-306-0001 COVER 6 KEY Iswitch button black plastic PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

19115
ITR-306-0001 COVER 6 KEY ISWITCH BUTTON BLACK PLASTIC PUSH BUTTONS
19122 ITR-308-1001 COVER 8 KEY Iswitch four button plastic PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

19122
ITR-308-1001 COVER 8 KEY ISWITCH FOUR BUTTON PLASTIC PUSH BUTTONS
19129 ITR-308-1100 COVER 8 KEY Iswitch LCD 8 button (aluminium) PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

19129
ITR-308-1100 COVER 8 KEY ISWITCH LCD 8 BUTTON (ALUMINIUM) PUSH BUTTONS
19132 ITR-308-1200 COVER 8 KEY Iswitch LCD 8 button (natural stainless steel) PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

19132
ITR-308-1200 COVER 8 KEY ISWITCH LCD 8 BUTTON (NATURAL STAINLESS STEEL) PUSH BUTTONS
19133 ITR-308-1301 COVER 8 KEY Iswitch LCD 8 button (natural glass) PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

19133
ITR-308-1301 COVER 8 KEY ISWITCH LCD 8 BUTTON (NATURAL GLASS) PUSH BUTTONS
19136 ITR-306-0101 COVER KEY Iswitch 6 button natural aluminium eloxal mat unbrashed PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

 

19136
ITR-306-0101 COVER KEY ISWITCH 6 BUTTON NATURAL ALUMINIUM ELOXAL MAT UNBRASHED PUSH BUTTONS
19139 ITR-306-0301 COVER 6 KEY Iswitch button (natural glass) PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

19139
ITR-306-0301 COVER 6 KEY ISWITCH BUTTON (NATURAL GLASS) PUSH BUTTONS
19141 ITR-308-0001 COVER 8 KEY Iswitch button black plastic PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

19141
ITR-308-0001 COVER 8 KEY ISWITCH BUTTON BLACK PLASTIC PUSH BUTTONS
19146 ITR-308-0100 COVER KEY Iswitch 8 button natural aluminium eloxal mat unbrashed PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

 

19146
ITR-308-0100 COVER KEY ISWITCH 8 BUTTON NATURAL ALUMINIUM ELOXAL MAT UNBRASHED PUSH BUTTONS
19152 ITR-308-0200 COVER 8 KEY Iswitch natural stainless steel PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

19152
ITR-308-0200 COVER 8 KEY ISWITCH NATURAL STAINLESS STEEL PUSH BUTTONS
19153 ITR-308-0301 COVER 8 KEY Iswitch 8 button (natural glass) PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

19153
ITR-308-0301 COVER 8 KEY ISWITCH 8 BUTTON (NATURAL GLASS) PUSH BUTTONS
19155 ITR-310-0001 COVER 10 KEY Iswitch button black plastic PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

19155
ITR-310-0001 COVER 10 KEY ISWITCH BUTTON BLACK PLASTIC PUSH BUTTONS
19170 ITR-310-0100 COVER 10 KEY Iswitch button (aluminium) PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

19170
ITR-310-0100 COVER 10 KEY ISWITCH BUTTON (ALUMINIUM) PUSH BUTTONS
19173 ITR-310-0200 COVER 10 KEY Iswitch button (natural stainless steel) PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

19173
ITR-310-0200 COVER 10 KEY ISWITCH BUTTON (NATURAL STAINLESS STEEL) PUSH BUTTONS
19174 ITR-310-0301 COVER 10 KEY Iswitch button (Glass) PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

19174
ITR-310-0301 COVER 10 KEY ISWITCH BUTTON (GLASS) PUSH BUTTONS
19176 ITR-302-1001 COVER 2 KEY with LCD plastic PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

19176
ITR-302-1001 COVER 2 KEY WITH LCD PLASTIC PUSH BUTTONS
19182 ITR-302-1100 COVER 2 KEY Iswitch LCD 2 button (aluminium) PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

19182
ITR-302-1100 COVER 2 KEY ISWITCH LCD 2 BUTTON (ALUMINIUM) PUSH BUTTONS
19185 ITR-302-1200 COVER 2 KEY Iswitch LCD 2 button (stainless steel) PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

19185
ITR-302-1200 COVER 2 KEY ISWITCH LCD 2 BUTTON (STAINLESS STEEL) PUSH BUTTONS
19186 ITR-302-1301 COVER 2 KEY Iswitch LCD 2 button (GlassEF) PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

19186
ITR-302-1301 COVER 2 KEY ISWITCH LCD 2 BUTTON (GLASSEF) PUSH BUTTONS
19189 ITR-304-1001 COVER 4 KEY with LCD plastic PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

19189
ITR-304-1001 COVER 4 KEY WITH LCD PLASTIC PUSH BUTTONS
19194 ITR-304-1100 COVER 4 KEY with LCD (aluminium) PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

19194
ITR-304-1100 COVER 4 KEY WITH LCD (ALUMINIUM) PUSH BUTTONS
19197 ITR-304-1301 COVER 4 KEY with LCD (glass) PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

19197
ITR-304-1301 COVER 4 KEY WITH LCD (GLASS) PUSH BUTTONS
19268 ITR-110-0204 Interra 10.1'' black aluminum frame SIN FAMILIA
Interra 10.1'' black aluminum frame
19268
ITR-110-0204 INTERRA 10.1'' BLACK ALUMINUM FRAME SIN FAMILIA
17601 ITR-212-0003 Interra 12' I/O Modül without sensor with integrated dimmer 300W, NO KNX ACTUATORS - OUTPUTS

EIO product, that runs integrated with Hotel Management System, provides solutions needed at hotels.
EIO product has 12 inputs and 12 outputs. EIO product can be added with sensor modules dedicated to temperature, humidity, water, and flood conditions. EIO product can run as stand-alone, or in an IP-network along with Interra Touch-Panel and Interra Server SW solutions. All I/Os can be modified according to project's requirements. Combinations of I/Os are controlled through logic operators. 

Time controls could also be made through pre-time and post-time structuring.

FUNCTIONS
• Lighting.
• Heating.
• Curtains-Blinds
• Curtains-Blinds 24V.
• Fan Coil 2 conduits.
• Fan Coil 4 conduits

17601
ITR-212-0003 INTERRA 12' I/O MODÜL WITHOUT SENSOR WITH INTEGRATED DIMMER 300W, NO KNX ACTUATORS - OUTPUTS
17602 ITR-810-0001 SIP server, 10 DIN units SIN FAMILIA

Interra makes SIP Server based visual-intercom possible.

SIP Server is supported by a 12V-2A DC power supply. This supply is the same of the one with 3 green pins, used widely at industrial market. Pin indicators are written on a plastic cover. Middle pin is for earthing and does not have usage anymore. Resetting button on top cover is used for hand resetting of the device.  This button also has LED indicator. LED lamps light up as system runs.

17602
ITR-810-0001 SIP SERVER, 10 DIN UNITS SIN FAMILIA
17603 ITR-820-0001 Interra IS Server, 10U SIN FAMILIA

Interra IS is designed to provide life spaces with comfort and ease. Interra IS is supplied by 12V-2A DC source. This DC source is the same of the one with 3 green pins, used widely at industrial market. Pin indicators are written on a plastic cover. Middle pin is for earthing and does not have much usage. Resetting button on cover is for re-booting the device automatically. This button also has LED indicator. LED lamps light up as system runs.

17603
ITR-820-0001 INTERRA IS SERVER, 10U SIN FAMILIA
17631 ITR-110-9004 Interra 10,1'' Screen flush mouting box I4 VISUALIZATION
Interra 10,1'' Screen flush mouting box I4
17631
ITR-110-9004 INTERRA 10,1'' SCREEN FLUSH MOUTING BOX I4 VISUALIZATION
17664 ITR-107-0201 Frames for Interra 7" Screen VISUALIZATION
Upper and lower frame for INTERRA 7 "screen.

Magnetic fixation.
17664
ITR-107-0201 FRAMES FOR INTERRA 7" SCREEN VISUALIZATION
17673 ITR-412-0030 Power Supply 12V 3A SYSTEM DEVICES

Input: 85 ~ 265VAC / 0.5A MAX 50 ~ 60Hz

Output: +12VDC 3.0A / 36W

17673
ITR-412-0030 POWER SUPPLY 12V 3A SYSTEM DEVICES
17674 ITR-107-9004 Interra 7" Screen Flush mounting box VISUALIZATION
PVC flush mounting box.
17674
ITR-107-9004 INTERRA 7" SCREEN FLUSH MOUNTING BOX VISUALIZATION
19274 ITR-165-0204 Imini frame OTHER ACCESSORIES
Imini acrlic black frame frame
19274
ITR-165-0204 IMINI FRAME OTHER ACCESSORIES
19276 ITR-165-9004 flush mount box for Imini (Standart 2 gang electric box) OTHER ACCESSORIES
flush mount box for Imini (Standart 2 gang electric box)
19276
ITR-165-9004 FLUSH MOUNT BOX FOR IMINI (STANDART 2 GANG ELECTRIC BOX) OTHER ACCESSORIES


KNX SPECIAL CATALOGUES
Different looks for KNX push buttons
Push buttons
Smart metering
MDT Catalog 2017
Iddero Verso Interactive Presentation

LEARN
Free webinars
uBrick Tutorials
VideoTutorials CBSE


PARTICIPATE
µBrick Trivia
KNX Tips & tricks
TEST
Free test of CBSE visualization

LATEST KNX NEWS
All news

LATEST KNX OFFERS
All offers
DOWNLOADS
KNX - All brands

FUTURASMUS KNX GROUP
Contact
Location
Futurasmus in the world
FOLLOW US
YouTube Channel
Facebook
LinkedIN
Google+
Twitter

KNX++ TRAINING CENTER
Futurasmus Zentrum

CERTIFIED KNX TEST LAB
Futurasmus KNX Lab
SPECIALIZED KNX WHOLESALER CERTIFIED KNX TRAINING CENTRE
Futurasmus KNX Group is a highly specialized and internationally active KNX Wholesaler, being our forte the excellent technical support we provide. You can visit our online catalogue in this website and, if you are a professional, ask for a non binding offer for your KNX projects. Should you be interested in buying KNX components, you are welcome to read our General Sales Conditions and contact our technicians and commercial agents per telephone, e-mail or online help. Since 2003 we have been a Certified Training Centre KNX++, which means that we are entitled to impart the KNX Basic Course as well as the KNX Advanced Course and KNX Tutor Course. We are manufacturer-independent and also offer other specialized and monographic KNX seminars. After teaching more than 1.500 KNX partners, our KNX Trainers have quite a large and positive expertise. Please, contact us for customized KNX training worldwide (groups of at least 8 people) at training@futurasmus-knxgroup.org
USE OF COOKIES
We use our own and third-party cookies, analyzing your browsing habits in out website, with the finality of ensuring the quality, security and improvement of the offered services through the same. In the case that the user does not explicitly state whether to accept the installation of cookies, but continues using our website, it will mean that he has consented expressly, informing him about the possibility to block or remove the installed cookies on his computer by configuring the appropriate settings of the browser. You can get more information on this subject reading our "Cookies Policy".