Order by:   Filter results: 
Web Code Reference Description Category Price
18537 601317 Movement detector IS D360 SENSORS
For ceiling mounting
Sensor system: 10 detection levels, 720 switching zones.
Range: max. 8.0 m, all round (temperature-stabilized).
Detection angle: 360° at 180° opening angle.
Twilight setting: 2.0 to 2000 lx.
Permanent light: switchable (4.0 h).
Timer setting: 5.0 s to 20 min.
Degree of protection: IP 20.
Power supply: 230 to 240 V.
Temperature range: –20 to +50 °C.
Dimensions: 83 x 82 mm.
18537
601317 MOVEMENT DETECTOR IS D360 SENSORS
19405 007614 Motion detector iHF 3D KNX DETECTORS
  • Capture what you want. Fits the building network.
  •  Motion detector iHF 3D KNX, ideal for facades, carports, parking lots and terraces.
  • 160 ° iHF sensor with 1-7 m range, 3D antenna technology, detects and distinguishes moving objects, no more malfunctioning by small animals, cold or heat.
  • Captures seamlessly no matter which direction, KNX-capable.

 

19405
007614 MOTION DETECTOR IHF 3D KNX DETECTORS
19408 033033 PRESENCE SENSOR IR QUATTRO SLIM XS KNX DETECTORS

 

·         For offices, conference rooms, classrooms and side rooms

·         Super flat 360° infrared presence detector

·         16 m² square presence detection area

·         Only 6 mm visible after ceiling installation

·         Fits in every mounting box

·         Unique retina lens

·         Optional: User remote control RC5, service remote control RC8, Smart Remote

19408
033033 PRESENCE SENSOR IR QUATTRO SLIM XS KNX DETECTORS
19409 029609 Infrared motion detector - sensIQ KNX black EVO DETECTORS
Infrared motion detector - sensIQ KNX black EVO

• For indoor and outdoor use
• 4 highly sensitive pyro sensors with 1360 switching zones
• 300 ° detection angle with 180 ° opening angle
• Teach mode and continuous light adjustable via remote control
• Twilight, time and independent range setting directly on the device
• Incl. IR remote control RC9, incl. Corner wall bracket

The sensIQ KNX presence detector is a passive infrared (PIR)
motion detector with integrated light-level sensor, integrated IR receiv-
he and integrated red light emitting diode (LED) for indicating a move
ment detected. The detector is capable of performing the following
functions:
1.1 Light output
1.2 Presence output
1.3 Close-up range output
1.4 Photo-cell controllers
1.5 Light level measured
1.6 Sabotage protection
1.7 Interconnection
1.8 Pyros 1-4
19409
029609 INFRARED MOTION DETECTOR - SENSIQ KNX BLACK EVO DETECTORS
19416 004057 Motion detector sensIQ S KNX DETECTORS


• For indoors and outdoors
• 4 highly-sensitive pyro sensors with 1360 switching zones
• 300° angle of coverage with 180° angle of aperture
• Holiday mode and permanent light configurable via remote control
• Twilight, time and independent range setting directly on the device
• Optional: IR remote control RC1, corner wall mount white

https://youtu.be/mzE83ZTxpr4

19416
004057 MOTION DETECTOR SENSIQ S KNX DETECTORS
19441 011635 KNX IS 3360 INFRARED MOVEMENT SENSOR Surface-mounted, square DETECTORS
Large spaces, multi-storey car parks and production buildings with ceiling heights of up to 4 m rarely provide installation surfaces every metre.

These environments call for motion detectors with a long reach. Like the IS 3360. It detects any tangential movement within an all-round radius of
20 metres. Even installed at heights of up to 4 metres. In short: one IS 3360 covers an area of more than 1000 m²! STEINEL Infrared technology
that keeps its promises.



Dimensions 65 x 95 x 95 mm
Model: Movement sensor
Sensor type Passive infrared
Power supply KNX bus voltage
Recommended installation height 2.5-4 m
Installation Ceiling
Reach, tangential 20 m
Detection angle 360° with 180° angle of aperture
Twilight setting 2 - 1000 Lux
Light output 2 channels, including dimming level and basic light level
Presence output Switching response irrespective of light level
HVAC output Switching response irrespective of light level
Photo-cell controller output Switching response governed by light level
Further outputs Light level, sabotage protection
Time setting 1-255
IP rating IP54
Temperature range -20-+50
Version KNX – Surface-mounted, square
Housing UV-resistant plastic
Model KNX
19441
011635 KNX IS 3360 INFRARED MOVEMENT SENSOR SURFACE-MOUNTED, SQUARE DETECTORS
19474 033538 KNX IS 3360 INFRARED MOVEMENT SENSOR Surface-mounted, ROUND SIN FAMILIA
Large spaces, multi-storey car parks and production buildings with ceiling heights of up to 4 m rarely provide installation surfaces every metre.

These environments call for motion detectors with a long reach. Like the IS 3360. It detects any tangential movement within an all-round radius of
20 metres. Even installed at heights of up to 4 metres. In short: one IS 3360 covers an area of more than 1000 m²! STEINEL Infrared technology
that keeps its promises.



Dimensions 65 x 95 x 95 mm
Model: Movement sensor
Sensor type Passive infrared
Power supply KNX bus voltage
Recommended installation height 2.5-4 m
Installation Ceiling
Reach, tangential 20 m
Detection angle 360° with 180° angle of aperture
Twilight setting 2 - 1000 Lux
Light output 2 channels, including dimming level and basic light level
Presence output Switching response irrespective of light level
HVAC output Switching response irrespective of light level
Photo-cell controller output Switching response governed by light level
Further outputs Light level, sabotage protection
Time setting 1-255
IP rating IP54
Temperature range -20-+50
Version KNX – Surface-mounted, ROUND
Housing UV-resistant plastic
Model KNX
19474
033538 KNX IS 3360 INFRARED MOVEMENT SENSOR SURFACE-MOUNTED, ROUND SIN FAMILIA
19488 011659 KNX IS 345 INFRARED MOVEMENT SENSOR Surface-mounted, square DETECTORS
IS 345

Huge reach. Infrared motion detector IS 345 for indoors and out, ideal for passageways, corridors and commonly used spaces, installation height 5 m, detection zone 12 x 4 m (radial) and 20 x 4 m (tangentiall), large terminal compartment for easy installation. Available either in round or square surface-mounted and concealed version.

Technical specifications
Dimensions 65 x 95 x 95 mm
Model Movement sensor
Sensor type Passive infrared
Power supply KNX bus voltage
Recommended installation height 2.5-5 m
Reach, radial 12 x 4 m
Reach, tangential 20 x 4 m
Detection angle Aisle with 45° angle of aperture
Twilight setting 2 - 1000 Lux
Light output 2 channels, including dimming level and basic light level
Presence output Switching response irrespective of light level
HVAC output Switching response irrespective of light level
Photo-cell controller output Switching response governed by light level
Further outputs Light level, sabotage protection
Time setting 1-255
IP rating IP54
Protection class II
Temperature range -20-+50
Version KNX – Surface-mounted, square
Housing UV-resistant plastic
Model KNX
19488
011659 KNX IS 345 INFRARED MOVEMENT SENSOR SURFACE-MOUNTED, SQUARE DETECTORS
19490 033880 KNX IS 345 INFRARED MOVEMENT SENSOR Surface-mounted, ROUND DETECTORS
IS 345

Huge reach. Infrared motion detector IS 345 for indoors and out, ideal for passageways, corridors and commonly used spaces, installation height 5 m, detection zone 12 x 4 m (radial) and 20 x 4 m (tangentiall), large terminal compartment for easy installation. Available either in round or square surface-mounted and concealed version.

Technical specifications
Dimensions 65 x 95 x 95 mm
Model Movement sensor
Sensor type Passive infrared
Power supply KNX bus voltage
Recommended installation height 2.5-5 m
Reach, radial 12 x 4 m
Reach, tangential 20 x 4 m
Detection angle Aisle with 45° angle of aperture
Twilight setting 2 - 1000 Lux
Light output 2 channels, including dimming level and basic light level
Presence output Switching response irrespective of light level
HVAC output Switching response irrespective of light level
Photo-cell controller output Switching response governed by light level
Further outputs Light level, sabotage protection
Time setting 1-255
IP rating IP54
Protection class II
Temperature range -20-+50
Version KNX – Surface-mounted, ROUND
Housing UV-resistant plastic
Model KNX
19490
033880 KNX IS 345 INFRARED MOVEMENT SENSOR SURFACE-MOUNTED, ROUND DETECTORS
19491 011673 MOTION DETECTOR KNX HF 3360 Surface-mounted, square DETECTORS
Motion detector
HF 3360

Perfection through and through. High-frequency motion detector HF 3360, ideal for basement corridors, stairwells, multi-storey car parks, installation height 2.8 m, 360° angle of coverage, reach 1 – 8 m (radial), detection regardless of temperature, HF-sensor technology also detects movement through glass, wood and stud walls. Available either in round or square surface-mounted and concealed version.

It detects simply everything. Very fast and if required over 2 storeys.

High-frequency technology is the perfect alternative in areas that can pose problems for temperature-based infrared sensors. This makes the HF 3360 the ideal solution if you want to automate lighting in winding basement corridors, stairwells and multi-storey car parks. It detects the smallest of movements reliably and precisely and ensures the perfect automatic lighting control - even in stairwells over two storeys high. The HF 3360 is also ideal for alI entrance areas because light is switched ON as soon as the sensor detects the door opening. Available in surface-mounted and concealed installation versions, and naturally compatible with the standard interfaces.
19491
011673 MOTION DETECTOR KNX HF 3360 SURFACE-MOUNTED, SQUARE DETECTORS
19492 033767 MOTION DETECTOR KNX HF 3360 Surface-mounted, round DETECTORS
Motion detector
HF 3360

Perfection through and through. High-frequency motion detector HF 3360, ideal for basement corridors, stairwells, multi-storey car parks, installation height 2.8 m, 360° angle of coverage, reach 1 – 8 m (radial), detection regardless of temperature, HF-sensor technology also detects movement through glass, wood and stud walls. Available either in round or square surface-mounted and concealed version.

It detects simply everything. Very fast and if required over 2 storeys.

High-frequency technology is the perfect alternative in areas that can pose problems for temperature-based infrared sensors. This makes the HF 3360 the ideal solution if you want to automate lighting in winding basement corridors, stairwells and multi-storey car parks. It detects the smallest of movements reliably and precisely and ensures the perfect automatic lighting control - even in stairwells over two storeys high. The HF 3360 is also ideal for alI entrance areas because light is switched ON as soon as the sensor detects the door opening. Available in surface-mounted and concealed installation versions, and naturally compatible with the standard interfaces.
19492
033767 MOTION DETECTOR KNX HF 3360 SURFACE-MOUNTED, ROUND DETECTORS
19493 011628 DETECTOR MOTION SENSOR IR KNX IS 3180 SQUARE SURFACE DETECTORS

For large areas. Infrared motion detector IS 3180 for indoors and out, ideal for watching over large areas, ideal installation height 2 m, 180° angle of coverage, reach 20 m max. or 8 m max. (tangential), large terminal compartment for easy installation.

Great performers for industry and business. 100% surveillance over up to 500 m².

These sensors are the perfect choice when it comes to protecting industrial and business premises and making them secure. So it is important to have far-sighted guards that instantly respond to any movement. The IS 3180 is made for the job. The IP 54 rating reliably protects its inner values: featuring top-calibre components such as two precision modular pyro sensors and multi-lens, it watches over almost every last inch of areas measuring a good 500 m². The concealed installation sensor that combines everything that's important to electrical fitters and security personnel.

19493
011628 DETECTOR MOTION SENSOR IR KNX IS 3180 SQUARE SURFACE DETECTORS
19494 033774 MOTION DETECTOR KNX HF 3360 Flush-mounted, square DETECTORS
Motion detector
HF 3360

Perfection through and through. High-frequency motion detector HF 3360, ideal for basement corridors, stairwells, multi-storey car parks, installation height 2.8 m, 360° angle of coverage, reach 1 – 8 m (radial), detection regardless of temperature, HF-sensor technology also detects movement through glass, wood and stud walls. Available either in round or square surface-mounted and concealed version.

It detects simply everything. Very fast and if required over 2 storeys.

High-frequency technology is the perfect alternative in areas that can pose problems for temperature-based infrared sensors. This makes the HF 3360 the ideal solution if you want to automate lighting in winding basement corridors, stairwells and multi-storey car parks. It detects the smallest of movements reliably and precisely and ensures the perfect automatic lighting control - even in stairwells over two storeys high. The HF 3360 is also ideal for alI entrance areas because light is switched ON as soon as the sensor detects the door opening. Available in surface-mounted and concealed installation versions, and naturally compatible with the standard interfaces.
19494
033774 MOTION DETECTOR KNX HF 3360 FLUSH-MOUNTED, SQUARE DETECTORS
19495 033781 MOTION DETECTOR KNX HF 3360 flush-mounted, round DETECTORS
Motion detector
HF 3360

Perfection through and through. High-frequency motion detector HF 3360, ideal for basement corridors, stairwells, multi-storey car parks, installation height 2.8 m, 360° angle of coverage, reach 1 – 8 m (radial), detection regardless of temperature, HF-sensor technology also detects movement through glass, wood and stud walls. Available either in round or square surface-mounted and concealed version.

It detects simply everything. Very fast and if required over 2 storeys.

High-frequency technology is the perfect alternative in areas that can pose problems for temperature-based infrared sensors. This makes the HF 3360 the ideal solution if you want to automate lighting in winding basement corridors, stairwells and multi-storey car parks. It detects the smallest of movements reliably and precisely and ensures the perfect automatic lighting control - even in stairwells over two storeys high. The HF 3360 is also ideal for alI entrance areas because light is switched ON as soon as the sensor detects the door opening. Available in surface-mounted and concealed installation versions, and naturally compatible with the standard interfaces.
19495
033781 MOTION DETECTOR KNX HF 3360 FLUSH-MOUNTED, ROUND DETECTORS
19496 033897 KNX IS 345 INFRARED MOVEMENT SENSOR Flush-mounted, square DETECTORS
IS 345

Huge reach. Infrared motion detector IS 345 for indoors and out, ideal for passageways, corridors and commonly used spaces, installation height 5 m, detection zone 12 x 4 m (radial) and 20 x 4 m (tangentiall), large terminal compartment for easy installation. Available either in round or square surface-mounted and concealed version.

Technical specifications
Dimensions 65 x 95 x 95 mm
Model Movement sensor
Sensor type Passive infrared
Power supply KNX bus voltage
Recommended installation height 2.5-5 m
Reach, radial 12 x 4 m
Reach, tangential 20 x 4 m
Detection angle Aisle with 45° angle of aperture
Twilight setting 2 - 1000 Lux
Light output 2 channels, including dimming level and basic light level
Presence output Switching response irrespective of light level
HVAC output Switching response irrespective of light level
Photo-cell controller output Switching response governed by light level
Further outputs Light level, sabotage protection
Time setting 1-255
IP rating IP54
Protection class II
Temperature range -20-+50
Version KNX – Flush-mounted, square
Housing UV-resistant plastic
Model KNX
19496
033897 KNX IS 345 INFRARED MOVEMENT SENSOR FLUSH-MOUNTED, SQUARE DETECTORS
19497 033552 KNX IS 3360 INFRARED MOVEMENT SENSOR Flush-mounted, ROUND SIN FAMILIA
Large spaces, multi-storey car parks and production buildings with ceiling heights of up to 4 m rarely provide installation surfaces every metre.

These environments call for motion detectors with a long reach. Like the IS 3360. It detects any tangential movement within an all-round radius of
20 metres. Even installed at heights of up to 4 metres. In short: one IS 3360 covers an area of more than 1000 m²! STEINEL Infrared technology
that keeps its promises.



Dimensions 65 x 95 x 95 mm
Model: Movement sensor
Sensor type Passive infrared
Power supply KNX bus voltage
Recommended installation height 2.5-4 m
Installation Ceiling
Reach, tangential 20 m
Detection angle 360° with 180° angle of aperture
Twilight setting 2 - 1000 Lux
Light output 2 channels, including dimming level and basic light level
Presence output Switching response irrespective of light level
HVAC output Switching response irrespective of light level
Photo-cell controller output Switching response governed by light level
Further outputs Light level, sabotage protection
Time setting 1-255
IP rating IP54
Temperature range -20-+50
Version KNX – Surface-mounted, ROUND
Housing UV-resistant plastic
Model KNX
19497
033552 KNX IS 3360 INFRARED MOVEMENT SENSOR FLUSH-MOUNTED, ROUND SIN FAMILIA
19498 033545 KNX IS 3360 INFRARED MOVEMENT SENSOR Flush-mounted, SQUARED SIN FAMILIA
Large spaces, multi-storey car parks and production buildings with ceiling heights of up to 4 m rarely provide installation surfaces every metre.

These environments call for motion detectors with a long reach. Like the IS 3360. It detects any tangential movement within an all-round radius of
20 metres. Even installed at heights of up to 4 metres. In short: one IS 3360 covers an area of more than 1000 m²! STEINEL Infrared technology
that keeps its promises.



Dimensions 65 x 95 x 95 mm
Model: Movement sensor
Sensor type Passive infrared
Power supply KNX bus voltage
Recommended installation height 2.5-4 m
Installation Ceiling
Reach, tangential 20 m
Detection angle 360° with 180° angle of aperture
Twilight setting 2 - 1000 Lux
Light output 2 channels, including dimming level and basic light level
Presence output Switching response irrespective of light level
HVAC output Switching response irrespective of light level
Photo-cell controller output Switching response governed by light level
Further outputs Light level, sabotage protection
Time setting 1-255
IP rating IP54
Temperature range -20-+50
Version KNX – Surface-mounted, ROUND
Housing UV-resistant plastic
Model KNX
19498
033545 KNX IS 3360 INFRARED MOVEMENT SENSOR FLUSH-MOUNTED, SQUARED SIN FAMILIA
19501 033903 KNX IS 345 INFRARED MOVEMENT SENSOR FLUSH-mounted, ROUND DETECTORS
IS 345

Huge reach. Infrared motion detector IS 345 for indoors and out, ideal for passageways, corridors and commonly used spaces, installation height 5 m, detection zone 12 x 4 m (radial) and 20 x 4 m (tangentiall), large terminal compartment for easy installation. Available either in round or square surface-mounted and concealed version.

Technical specifications
Dimensions 65 x 95 x 95 mm
Model Movement sensor
Sensor type Passive infrared
Power supply KNX bus voltage
Recommended installation height 2.5-5 m
Reach, radial 12 x 4 m
Reach, tangential 20 x 4 m
Detection angle Aisle with 45° angle of aperture
Twilight setting 2 - 1000 Lux
Light output 2 channels, including dimming level and basic light level
Presence output Switching response irrespective of light level
HVAC output Switching response irrespective of light level
Photo-cell controller output Switching response governed by light level
Further outputs Light level, sabotage protection
Time setting 1-255
IP rating IP54
Protection class II
Temperature range -20-+50
Version KNX – FLUSH-mounted, ROUND
Housing UV-resistant plastic
Model KNX
19501
033903 KNX IS 345 INFRARED MOVEMENT SENSOR FLUSH-MOUNTED, ROUND DETECTORS
19503 011642 MOTION DETECTOR KNX IS 3360 MX Highbay Surface-mounted, square DETECTORS

IS 3360 MX Highbay


A head for heights. Powerful reach. Reliable. IS 3360 MX Highbay motion detector – ideal for high ceilings in industrial buildings or commercial properties. For mounting heights of up to 14 m. High-precision 360° infrared sensor. Maximum reach: 18 m. For watching over up to 1000 sq.m. Available as square surface-mounted and concealed version.


The ceilings are generally quite high in industrial halls and business premises. Good to know then that even high ceilings do not present a problem to the IS 3360 MX Highbay. The long-reach motion detector has an extra-large detection zone and remains absolutely alert even when it is installed at a height of up to 14 metres. The IS 3360 MX Highbay is highly reliable.

Technical Specifications
European Article Number (EAN)
4007841011642
Dimensions
65 x 95 x 95 mm
Model
Movement sensor
Sensor type
Passive infrared
Power supply
KNX bus voltage
Recommended installation height
4-14 m
Reach, tangential
max. 18m
Detection angle
360°

Twilight setting
2 - 1000 Lux
Light output
2 channels, including dimming level and basic light level
Presence output
Switching response irrespective of light level
HVAC output
Switching response irrespective of light level
Photo-cell controller output
Switching response governed by light level
Further outputs
Light level, sabotage protection
Time setting
1-255
IP rating
IP54
Temperature range
-20-+50
Version
KNX – flush-mounted, square
Housing
UV-resistant plastic
Model
KNX

19503
011642 MOTION DETECTOR KNX IS 3360 MX HIGHBAY SURFACE-MOUNTED, SQUARE DETECTORS
19504 033613 MOTION DETECTOR KNX IS 3360 MX Highbay Flush-mounted, square DETECTORS

IS 3360 MX Highbay


A head for heights. Powerful reach. Reliable. IS 3360 MX Highbay motion detector – ideal for high ceilings in industrial buildings or commercial properties. For mounting heights of up to 14 m. High-precision 360° infrared sensor. Maximum reach: 18 m. For watching over up to 1000 sq.m. Available as square surface-mounted and concealed version.


The ceilings are generally quite high in industrial halls and business premises. Good to know then that even high ceilings do not present a problem to the IS 3360 MX Highbay. The long-reach motion detector has an extra-large detection zone and remains absolutely alert even when it is installed at a height of up to 14 metres. The IS 3360 MX Highbay is highly reliable.

Technical Specifications
European Article Number (EAN)
4007841011642
Dimensions
65 x 95 x 95 mm
Model
Movement sensor
Sensor type
Passive infrared
Power supply
KNX bus voltage
Recommended installation height
4-14 m
Reach, tangential
max. 18m
Detection angle
360°

Twilight setting
2 - 1000 Lux
Light output
2 channels, including dimming level and basic light level
Presence output
Switching response irrespective of light level
HVAC output
Switching response irrespective of light level
Photo-cell controller output
Switching response governed by light level
Further outputs
Light level, sabotage protection
Time setting
1-255
IP rating
IP54
Temperature range
-20-+50
Version
KNX – flush-mounted, square
Housing
UV-resistant plastic
Model
KNX

 

19504
033613 MOTION DETECTOR KNX IS 3360 MX HIGHBAY FLUSH-MOUNTED, SQUARE DETECTORS
19505 033941 MOTION DETECTOR IR KNX IS 345 MX Highbay flush mounted squared DETECTORS

High-bay warehouses often have narrow aisles and high ceilings. Too high for most sensors. We have just the right solution: the IS 345 MX Highbay infrared motion detector was specially developed for mounting at heights of up to 14 m and for precision detection between narrow aisles. Perched up there, it gives you surveillance quality at the highest level, literally. So in the future, you can confidently set your sights higher when it comes to sensor systems! Now also available for concealed installation.


European Article Number (EAN)
4007841033941
Dimensions
78 x 94 x 94 mm
Model
Movement sensor
Sensor type
Passive infrared
Power supply
KNX bus voltage
Reach, radial
30 x 4 m
Twilight setting
2 - 1000 Lux
Light output
2 channels including basic light level and constant lighting
Presence output
Switching response irrespective of light level
HVAC output
Switching response irrespective of light level
Photo-cell controller output
Switching response governed by light level
Further outputs
Light level, sabotage protection
Time setting
1-255
IP rating
IP20
Temperature range
-20-+50
Version
KNX - Concealed installation, square
Housing
UV-resistant plastic
Model
KNX

19505
033941 MOTION DETECTOR IR KNX IS 345 MX HIGHBAY FLUSH MOUNTED SQUARED DETECTORS
19506 011666 MOTION DETECTOR IR KNX IS 345 MX Highbay SURFACE mounted squared DETECTORS

High-bay warehouses often have narrow aisles and high ceilings. Too high for most sensors. We have just the right solution: the IS 345 MX Highbay infrared motion detector was specially developed for mounting at heights of up to 14 m and for precision detection between narrow aisles. Perched up there, it gives you surveillance quality at the highest level, literally. So in the future, you can confidently set your sights higher when it comes to sensor systems! Now also available for concealed installation.


European Article Number (EAN)
4007841033941
Dimensions
78 x 94 x 94 mm
Model
Movement sensor
Sensor type
Passive infrared
Power supply
KNX bus voltage
Reach, radial
30 x 4 m
Twilight setting
2 - 1000 Lux
Light output
2 channels including basic light level and constant lighting
Presence output
Switching response irrespective of light level
HVAC output
Switching response irrespective of light level
Photo-cell controller output
Switching response governed by light level
Further outputs
Light level, sabotage protection
Time setting
1-255
IP rating
IP20
Temperature range
-20-+50
Version
KNX - Concealed installation, square
Housing
UV-resistant plastic
Model
KNX

19506
011666 MOTION DETECTOR IR KNX IS 345 MX HIGHBAY SURFACE MOUNTED SQUARED DETECTORS
19509 011727 Light Sensor Dual photo-cell controller with KNX , surface-mount squared SENSORS

Light measurement in perfection. The Light Sensor Dual photo-cell controller with KNX interface measures directed and diffuse light, watches over areas below the sensor and measures the room brightness. Combining the measurement results reduces error influences. Available either in round or square surface-mounted and concealed version

 

Functional description

No matter whether focused or diffuse measurements are needed - both work with the Light Sensor Dual! The challenge must not be

underestimated. To obtain usable information on the lighting situation in a room, it is not sufficient simply to determine general brightness. It is

important to use a combination of measuring the light level at the desk, for example, and determining diffuse room brightness. This way, errors can

be ruled out for better lighting control. And the STEINEL Light Sensor Dual is simply perfect for this.

 

Technical specifications

Dimensions(w x h x d): 42 x 95 x 95 mm

Power supply KNX bus voltage

Sensor technology Photodiode

Detection angle specular and diffuse

Type Photoelectric lighting controller

Application indoors and outdoors

Installation Wall<br/> Ceiling

Recommended installation height 4 m

Twilight setting 2-1000

Further outputs Sabotageschutz, Messwert Helligkeit

Version KNX – Surface-mounted, square

Degree of protection (IP) IP54

Temperature range -20-+50

Material UV-resistant plastic

Model KNX

19509
011727 LIGHT SENSOR DUAL PHOTO-CELL CONTROLLER WITH KNX , SURFACE-MOUNT SQUARED SENSORS
19510 033637 Light Sensor Dual photo-cell controller with KNX , surface-mount ROUND SENSORS

Light measurement in perfection. The Light Sensor Dual photo-cell controller with KNX interface measures directed and diffuse light, watches over areas below the sensor and measures the room brightness. Combining the measurement results reduces error influences. Available either in round or square surface-mounted and concealed version

 

Functional description

No matter whether focused or diffuse measurements are needed - both work with the Light Sensor Dual! The challenge must not be

underestimated. To obtain usable information on the lighting situation in a room, it is not sufficient simply to determine general brightness. It is

important to use a combination of measuring the light level at the desk, for example, and determining diffuse room brightness. This way, errors can

be ruled out for better lighting control. And the STEINEL Light Sensor Dual is simply perfect for this.

 

Technical specifications

Dimensions(w x h x d): 42 x 95 x 95 mm

Power supply KNX bus voltage

Sensor technology Photodiode

Detection angle specular and diffuse

Type Photoelectric lighting controller

Application indoors and outdoors

Installation Wall<br/> Ceiling

Recommended installation height 4 m

Twilight setting 2-1000

Further outputs Sabotageschutz, Messwert Helligkeit

Version KNX – Surface-mounted, ROUND

Degree of protection (IP) IP54

Temperature range -20-+50

Material UV-resistant plastic

Model KNX

19510
033637 LIGHT SENSOR DUAL PHOTO-CELL CONTROLLER WITH KNX , SURFACE-MOUNT ROUND SENSORS
19511 011680 Light Sensor Dual photo-cell controller with KNX , FLUSH-MOUNT SQUARED SENSORS

Light measurement in perfection. The Light Sensor Dual photo-cell controller with KNX interface measures directed and diffuse light, watches over areas below the sensor and measures the room brightness. Combining the measurement results reduces error influences. Available either in round or square surface-mounted and concealed version

 

Functional description

No matter whether focused or diffuse measurements are needed - both work with the Light Sensor Dual! The challenge must not be

underestimated. To obtain usable information on the lighting situation in a room, it is not sufficient simply to determine general brightness. It is

important to use a combination of measuring the light level at the desk, for example, and determining diffuse room brightness. This way, errors can

be ruled out for better lighting control. And the STEINEL Light Sensor Dual is simply perfect for this.

 

Technical specifications

Dimensions(w x h x d): 42 x 95 x 95 mm

Power supply KNX bus voltage

Sensor technology Photodiode

Detection angle specular and diffuse

Type Photoelectric lighting controller

Application indoors and outdoors

Installation Wall<br/> Ceiling

Recommended installation height 4 m

Twilight setting 2-1000

Further outputs Sabotageschutz, Messwert Helligkeit

Version KNX – Surface-mounted,

Degree of protection (IP) IP54

Temperature range -20-+50

Material UV-resistant plastic

Model KNX

19511
011680 LIGHT SENSOR DUAL PHOTO-CELL CONTROLLER WITH KNX , FLUSH-MOUNT SQUARED SENSORS
19512 033651 Light Sensor Dual photo-cell controller with KNX , FLUSH-MOUNT ROUND SENSORS

Light measurement in perfection. The Light Sensor Dual photo-cell controller with KNX interface measures directed and diffuse light, watches over areas below the sensor and measures the room brightness. Combining the measurement results reduces error influences. Available either in round or square surface-mounted and concealed version

 

Functional description

No matter whether focused or diffuse measurements are needed - both work with the Light Sensor Dual! The challenge must not be

underestimated. To obtain usable information on the lighting situation in a room, it is not sufficient simply to determine general brightness. It is

important to use a combination of measuring the light level at the desk, for example, and determining diffuse room brightness. This way, errors can

be ruled out for better lighting control. And the STEINEL Light Sensor Dual is simply perfect for this.

 

Technical specifications

Dimensions(w x h x d): 42 x 95 x 95 mm

Power supply KNX bus voltage

Sensor technology Photodiode

Detection angle specular and diffuse

Type Photoelectric lighting controller

Application indoors and outdoors

Installation Wall<br/> Ceiling

Recommended installation height 4 m

Twilight setting 2-1000

Further outputs Sabotageschutz, Messwert Helligkeit

Version KNX – Surface-mounted, ROUND

Degree of protection (IP) IP54

Temperature range -20-+50

Material UV-resistant plastic

Model KNX

19512
033651 LIGHT SENSOR DUAL PHOTO-CELL CONTROLLER WITH KNX , FLUSH-MOUNT ROUND SENSORS
19513 008789 IR presence detector QUATTRO HD KNX flush mounted DETECTORS

 

presence detector
IR Quattro HD

https://www.youtube.com/watch?time_continue=8&v=I7NDcgy28xE

Nobody captures finer! Infrared Presence Detector PRO IR Quattro HD KNX for indoor use, ideal for medium to large offices, conference and meeting rooms, classrooms and lecture theaters, sports halls and warehouses, mounting height up to 10 m, with digital BUS interface for controlling 4 light channels and HVAC, 4800 switching zones for highest detection quality, 64 m² real presence area, square detection, mechanically scalable.

Latest detection quality. For the most modern buildings.

When it comes to intelligent building automation, presence detectors with extremely good detection are required. The IR Quattro HD leaves no answer unanswered: 4,800 switching zone closures in the quadratic presence area of ??64 m2 - which is mechanically scalable without any loss of quality - virtually eliminates false circuits or blind spots. This is high-definition quality in pure culture and a dream come true for architects, builders and users alike.

Technical specifications

Presence Control PRO IR Quattro HD, installation height 2.8 m
(white = tangential, orange = radial, gray = presence)
European Article Number (EAN)
4007841008789
Dimensions
120 x 120 x 70 mm
execution
presence detector
supply voltage
KNX bus voltage
recommended mounting height
2.5-10.00 m
sensors
13 acquisition levels
4800 switching zones
Location
in the interior of buildings
Assembly
blanket
settings
via ETS software, remote control or bus
Detection square presence
Max. 8 x 8 m (64 m²)
Acquisition Square Radial
Max. 8 x 8 m (64 m²)
Acquisition square tangential
Max. 20 x 20 m (400 m²)
Light channels light 1 - light 4
Switching / dimming, switching operation, constant light control, overrun time
basic brightness
Duration ONE, 1-255 min., 10-50%, all night
delay
Room monitoring, 0-255 min., Follow-up time 1-255 min.
Output HVAC
depending on presence
further outputs
Brightness value, sabotage protection
Output brightness value
in lux
Degree of protection (IP) with AP box
IP54
protection class
II
casing
UV-resistant, paintable
model
KNX

19513
008789 IR PRESENCE DETECTOR QUATTRO HD KNX FLUSH MOUNTED DETECTORS
19532 008772 IR PRESENCE SENSOR DETECTOR QUATTRO KNX flush mounted DETECTORS

Great detection quality. In small rooms.

The squaring of the circle. Infrared presence detector Presence Control PRO IR Quattro KNX for indoor, ideal for small offices, storage, supply and utility rooms, washrooms and toilets, mounting height up to 8 m, with digital BUS interface for controlling 4 light channels and HVAC, 1760 switching zones for excellent detection quality, quadratic detection with 16 m² presence area, square detection, mechanically scalable.

Even small offices as well as storage, supply, laundry and utility rooms should be reliably integrated into a KNX system. The IR Quattro KNX with its 1,760 switching zones is the ideal solution for this. Within the square footprint of 16 m², the range can be infinitely scaled. Without quality loss. What makes it possible to plan with high precision. Thanks to Presence Control PRO

European Article Number (EAN)
4007841008772
Dimensions
120 x 120 x 76 mm
execution
presence detector
sensor type
Passive infrared
supply voltage
KNX bus voltage
recommended mounting height
2.5-8.00 m
sensors
13 acquisition levels
1760 switching zones
Location
in the interior of buildings
Assembly
blanket
settings
via ETS software, remote control or bus
Detection square presence
Max. 4 x 4 m (16 m²)
Acquisition Square Radial
Max. 5 x 5 m (25 m²)
Acquisition square tangential
Max. 7 x 7 m (49 m²)

19532
008772 IR PRESENCE SENSOR DETECTOR QUATTRO KNX FLUSH MOUNTED DETECTORS
19533 008888 presence detector IR Quattro SLIM DETECTORS

IR Quattro SLIM
Extremely flat. Super sensitive.

https://www.youtube.com/watch?time_continue=4&v=wCXMyfNWd6g

Real 16 m² presence detection compressed to 4 mm. Presence detector Control PRO IR Quattro SLIM KNX for inside, ideal for small offices, storage, supply and utility rooms, washrooms and toilets, installation height up to 4 m, with digital BUS interface for controlling 4 light channels and HVAC, square detection with 16m² presence area , high quality retina lens.

Modern buildings are planned down to the last detail, both from a technical and design point of view. This should also apply to the sensors built into it. The IR Quattro SLIM fits perfectly into any ceiling structure thanks to its minimal installation height of only 4 mm. All the more surprising is its detection performance: The unique Retina lens has an installation height of up to 4 meters and a true presence range of an amazing 16 m². There the sensor escapes no movement. Despite flat construction.

19533
008888 PRESENCE DETECTOR IR QUATTRO SLIM DETECTORS
19534 008796 HF PRESENCE DETECTOR PRO HF 360 KNX DETECTORS

Captures everything. HF presence detector Presence Control PRO HF 360 KNX for indoor use, ideal for toilets with toilet cubicles, changing rooms, staircases, parking garages, kitchens, mounting height up to 3.5 m, with digital BUS interface for controlling 4 light channels and HVAC, 1 - 12 m Range, electronically adjustable and double-sided damping, temperature-independent detection, HF sensor technology also penetrates glass, wood and lightweight walls.
Presence Control PRO HF 360 | STEINEL Professional


Watch it here https://youtu.be/92hnR8QhkXo





European Article Number (EAN)
4007841008796
Dimensions
120 x 120 x 56 mm
execution
presence detector
sensor type
high frequency
supply voltage
KNX bus voltage
recommended mounting height
2.5-3,50 m
sensors
High frequency 5.8GHz (transmit power <1mW)
reach
Max. Ø 12m, infinitely adjustable
Location
in the interior of buildings
Assembly
blanket
angle of coverage
360 ° with 140 ° opening angle possibly through glass, wood and lightweight walls
settings
via ETS software, remote control or bus
Adaptation
For room adaptation, 1 or 2 detection directions can be mechanically faded out
Light channels light 1 - light 4
Switching / dimming, switching operation, constant light control, overrun time
basic brightness
Duration ONE, 1-255 min., 10-50%, all night
delay
Room monitoring, 0-255 min., Follow-up time 1-255 min.
Output presence follow-up time
1-255 sec. Or 1-255 min.
Output HVAC
depending on presence
further outputs
Brightness value, sabotage protection
Output brightness value
in lux
IP protection)
IP20
Degree of protection (IP) with AP box
IP54
protection class
II
temperature range
-25- + 55
IQ mode
Yes
casing
UV-resistant, paintable
model
KNX

19534
008796 HF PRESENCE DETECTOR PRO HF 360 KNX DETECTORS
19536 008802 presence detector DUAL HF KNX DETECTORS

Time and again, long corridors present challenges to intelligent building automation.
They are easily overcome with the Dual HF KNX. Fitted with two powerful high-frequency
sensors, the presence detector can cover an amazing 10 metres in each corridor direction.
With absolute precision, leaving no movement undetected – and completely without inad-
vertent triggering: the high-frequency technology reliably masks out movements in adjacent
rooms on either side

https://youtu.be/w1TPNTAmRoo

Technical specifications
Dimensions: (W x H x D) 120 x 120 x 75 mm
Power supply: KNX bus voltage
Sensor technology: high frequency, 5.8 GHz
Angle of coverage: corridor
Mounting height: max. 3.5 m
Reach (H = 2.8 m): max. 20 x 3 m,
(10 x 3 m in each direction)
KNX parameters:
Output, light: 4 channels including constant-lighting
control and basic light level
Output, presence: switching response irrespective
of ambient light level
Output, photo-cell controller: lights switched
on and off in relation to ambient brightness
Light level: 10 - 1000 lux, daylight operation
Time setting: 1 - 255 min
Further outputs: light level, sabotage protection
IP rating / protection class: IP 20 / III
Temperature range: -20°C - +55°C
Material: UV-resistant plastic
Accessories: remote controls RC6, RC7, Smart Remote

19536
008802 PRESENCE DETECTOR DUAL HF KNX DETECTORS
19540 029494 DETECTOR SENSOR PRESENCE IR ULTRASONIC DUAL TECH KNX DETECTORS
The best of both worlds.
Combined in one detector.
DualTech KNX
Offices, conference rooms and classrooms come with their own particular spatial
situations that don't exactly make it easy to provide efficient lighting control.
That's why we have developed an innovative 360° detector with a 28 sq.m. presence
detection zone that uses the best qualities of two leading technologies. This way, the
DualTech KNX can also detect movements without visual contact with the sensor.
PIR technology provides additional detection capabilities. And maximum reliability

Technical specifications
Dimensions (W x H x D): 120 x 120 x 68 mm
Power supply: KNX bus voltage
Sensor technology: 40 KHz ultrasonic and
passive infrared
Angle of coverage: 360°
Mounting height: 2.5 - 3.5 m
Reach, US: Ø 10 m radial, Ø 6 m tangential / presence
Reach, PIR: 3 x 3 m presence
KNX parameters:
Output, light: 4 channels including constant-lighting
control and basic light level
Output, presence: switching response irrespective
of ambient light level
Output, photo-cell controller: lights switched
on and off in relation to ambient brightness
Light level: 10 - 1000 lux, daylight operation
Time setting: 1 - 255 min
Further outputs: light level, sabotage protection
IP rating / protection class: IP 20 / III
Temperature range: -20°C - +55°C
Material: UV-resistant plastic (casing), HDPE (lens)
Accessories: remote controls RC6, RC7, Smart Remote
19540
029494 DETECTOR SENSOR PRESENCE IR ULTRASONIC DUAL TECH KNX DETECTORS
19541 029470 DETECTOR SENSOR PRESENCE ULTRASONIC US 360 KNX SIN FAMILIA
Detects without obstructions.

US 360 KNX
Oddly shaped architecture, partition walls or other obstacles present insurmountable
difficulties to some sensors. Yet the dynamic all-round precision detection capability of the
US 360 KNX works with absolute reliability behind objects too. The smallest of movements
are detected over up to Ø 6 m. Even in tricky detection situations. The space-filling ultrasonic
waves make this possible.
19541
029470 DETECTOR SENSOR PRESENCE ULTRASONIC US 360 KNX SIN FAMILIA
19542 029487 DETECTOR SENSOR MOVEMENT SINGLE US KNX DETECTORS

The ideal sensor for small corridors.


Single US KNX
Simple tasks demand simple answers. This is demonstrated by our Single US KNX 180°
ultrasonic sensor. Correctly aligned, it detects any movement in corridors and passageways
of up to 10 metres in length – even it they take place behind objects. Movements behind
closed doors, however, are not detected. This means the sensor only switches light on
when it's really needed.


Technical specifications
Dimensions (W x H x D): 120 x 120 x 73 mm
Power supply: KNX bus voltage
Sensor technology: 40 KHz ultrasonic
Angle of coverage: corridor, one direction
Mounting height: 2.5 - 3.5 m
Reach: 3 x 10 m
KNX parameters:
Output, light: 4 channels including constant-lighting
control and basic light level
Output, presence: switching response irrespective
of ambient light level
Output, photo-cell controller: lights switched
on and off in relation to ambient brightness
Light level: 10 - 1000 lux, daylight operation
Time setting: 1 - 255 min
Further outputs: light level, sabotage protection
IP rating / protection class: IP 20 / III
Temperature range: -20°C - +55°C
Material: UV-resistant plastic
Accessories: remote controls RC6, RC7, Smart Remote

19542
029487 DETECTOR SENSOR MOVEMENT SINGLE US KNX DETECTORS
19543 593018 remote control RC6 KNX for Presence Control PRO Presence detector OTHER ACCESSORIES
Service-friendly. Service remote control RC6 KNX for Presence Control PRO Presence detector as well as motion detector in connection with KNX interface
19543
593018 REMOTE CONTROL RC6 KNX FOR PRESENCE CONTROL PRO PRESENCE DETECTOR OTHER ACCESSORIES
19544 592912 remote control RC7 KNX OTHER ACCESSORIES
User remote control RC7 KNX

The full program at the touch of a button. User remote control RC7 KNX for Presence Control PRO Presence detector and motion detector in conjunction with KNX interface.
Decrease DIM level, increase output 1; Continuous OFF / ON output 1/2 (4 hours); Decrease DIM level, increase output 2; Save light scene 1 (value for output 1/2 is saved); Save light scene 2 (value for output 1/2 is saved); Reset function on potentiometer and DIP settings
19544
592912 REMOTE CONTROL RC7 KNX OTHER ACCESSORIES
19545 003029 CONTROL PRO AP BOX KNX Surface-mounted adapter OTHER ACCESSORIES
All good things are 4! Surface-mounted adapter Control PRO AP Box KNX for straightforward surface mounting, for KNX connection variants of Presence Control PRO IR Quattro HD, IR Quattro, HF 360, Dual HF 360, quadruple cable entry and large wiring space, protection class IP 20.
19545
003029 CONTROL PRO AP BOX KNX SURFACE-MOUNTED ADAPTER OTHER ACCESSORIES
19553 032975 infrared sensor switches IR 180 KNX DETECTORS

The new benchmark. High-precision IR 180 infrared presence sensor with a reach of 20 m. Ideal for new builds. 180° angle of coverage. Fast and easy 3-wire installation. Attractive design. Integrated button for manual override. The KNX version also provides temperature and air humidity readings. Available in white or silver finish colours

180º presence detector with radial reach of 4m


Dimensions: (h x to x p) 80 x 80 x 20.5 mm

Voltage: 220 - 240V

Degree of protection: IP20

Effective range of 20m

Energy storage system to guarantee its functionality even during an interruption of the supply.

Stand-by mode for a consumption of 0w

19553
032975 INFRARED SENSOR SWITCHES IR 180 KNX DETECTORS
19554 032968 infrared sensor switches IR 180 KNX DETECTORS
The new benchmark. High-precision IR 180 infrared presence sensor with a reach of 20 m. Ideal for new builds. 180° angle of coverage. Fast and easy 3-wire installation. Attractive design. Integrated button for manual override. The KNX version also provides temperature and air humidity readings. Available in white or silver finish colours

 

180º presence detector with radial reach of 4m


Dimensions: (h x to x p) 80 x 80 x 20.5 mm

Voltage: 220 - 240V

Degree of protection: IP20

Effective range of 20m

Energy storage system to guarantee its functionality even during an interruption of the supply.

Stand-by mode for a consumption of 0w

19554
032968 INFRARED SENSOR SWITCHES IR 180 KNX DETECTORS
19555 032876 Presence Detector Sensor HF 180 KNX DETECTORS
Steinel, 032876 (HF 180 KNX WHITE) Presence Detector Sensor Switch

High-frequency technology meets top-calibre design! With an angle of coverage of 180°,the HF 180 KNX sensor switch not only scores top marks in performance, it looks great too.The HF sensor technology detects every movement and switches instantly. The solution forstairwells, entrance rooms and toilet facilities, even when movement needs detecting throughthin partition walls. Intelligent technology that not only looks good, but is also easy to install.The KNX version also indicates temperature and air humidity levels measured.

Technical Specification:

Dimensions (H x W x D): 80 x 80 x 20.5 mm
Power supply: KNX bus voltage
Sensor technology: high frequency, 5.8 GHz
Angle of coverage: 180°
Reach: Ø 1 - 8 m
Twilight setting: 2 – 2000 lux
KNX parameters:
Light channels lights 1 – 4: switching/dimming,switching mode, constant-lighting control,stay ON time, basic light level: permanently ON,1 - 255 min, 10 - 50%, all night, output
HVAC: governed by presence, switching delay,room surveillance, 0 - 255 min Integrated button can be assigned to switching,dimming, roller-shutter control, scenario selection,encoder
Further outputs: temperature and air humidity
Time setting: 1 - 255 min
IP rating / protection class: IP 20 / II
Accessories: adapter for Busch Jäger and Jung switching programs, RC6, RC7, Smart Remote
HF 180 KNX: EAN white 4007841 032876
19555
032876 PRESENCE DETECTOR SENSOR HF 180 KNX DETECTORS
19556 032869 Presence Detector Sensor HF 180 KNX DETECTORS
Steinel, 032876 (HF 180 KNX WHITE) Presence Detector Sensor Switch

High-frequency technology meets top-calibre design! With an angle of coverage of 180°,the HF 180 KNX sensor switch not only scores top marks in performance, it looks great too.The HF sensor technology detects every movement and switches instantly. The solution forstairwells, entrance rooms and toilet facilities, even when movement needs detecting throughthin partition walls. Intelligent technology that not only looks good, but is also easy to install.The KNX version also indicates temperature and air humidity levels measured.

Technical Specification:

Dimensions (H x W x D): 80 x 80 x 20.5 mm
Power supply: KNX bus voltage
Sensor technology: high frequency, 5.8 GHz
Angle of coverage: 180°
Reach: Ø 1 - 8 m
Twilight setting: 2 – 2000 lux
KNX parameters:
Light channels lights 1 – 4: switching/dimming,switching mode, constant-lighting control,stay ON time, basic light level: permanently ON,1 - 255 min, 10 - 50%, all night, output
HVAC: governed by presence, switching delay,room surveillance, 0 - 255 min Integrated button can be assigned to switching,dimming, roller-shutter control, scenario selection,encoder
Further outputs: temperature and air humidity
Time setting: 1 - 255 min
IP rating / protection class: IP 20 / II
Accessories: adapter for Busch Jäger and Jung switching programs, RC6, RC7, Smart Remote
HF 180 KNX: EAN white 4007841 032876
19556
032869 PRESENCE DETECTOR SENSOR HF 180 KNX DETECTORS
20010 033200 HUMAN PRESENCE DETECTOR AND PEOPLE COUNTER DETECTORS

Detects persons in 5 individually adjustable zones! As the world's only optical sensor of its kind, it detects and counts people sitting and standing in up to five precisely definable detection zones. 110° angle of coverage with a reach of up to 10 m from a maximum mounting height of 6 m. Integrated, state-of-the-art imaging compares 150,000 positive images and 7 million negative images in real time. Ideal for managing meeting rooms, because it identifies actual room use, or for detecting unused office workstations for flexible desk management. KNX interface with temperature and humidity measurement, available from STEINEL Systems partners.

About HPD2

Camera multi-sensor system. Coming close to the future.

It has taken the world's best specialists and universities over 5 years to develop this system that analyses images directly in the sensor. With the HPD2 – HPD stands for "Human Presence Detection" – STEINEL is making a quantum leap in sensor technology. Because HPD2 is the world's first presence detector that's not only capable of detecting whether people are present but can also count them. No matter whether moving about or not. At the heart of the person sensor is innovative technology that uses a highly sensitive optical system in combination with a complex mathematical algorithm. The HPD2 also has integrated temperature and humidity sensors, opening up completely new possibilities in building automation. At last, not only light but also heating and air-conditioning can now be controlled in line with demand for the number of people present in a room. Identifying actual room use, the HPD2 can also be used for managing meeting rooms or for detecting unused office workstations for flexible desk management.

20010
033200 HUMAN PRESENCE DETECTOR AND PEOPLE COUNTER DETECTORS
20011 056339 HUMAN PRESENCE SENSOR. BREATHE DETECTION. TRUE PRESENCE MULTISENSOR KNX: DETECTORS
True Presence®: The Digital Sensor Revolution.

True Presence® is the world's first true presence detector. He reliably recognizes the presence of a human, no matter what he is doing: walking, standing, sitting, reading, resting or sleeping. This is real, digital knowledge about presence or absence. This is the essential information for existing and future building management. Our True Presence® technology is based on the finest ambient radio frequency measurements. The presence of humans is indicated when three-dimensional breath patterns (micro-movements of vital signs) are detected. In addition, the distance of the person to the sensor and the direction of movement is determined. And so fast and precise that it no longer needs to be set after-runtime.

True Presence® is at the forefront of presence detector evolution, ushering in a new era of building sensorics.
20011
056339 HUMAN PRESENCE SENSOR. BREATHE DETECTION. TRUE PRESENCE MULTISENSOR KNX: DETECTORS
20013 053871 PRESENCE DETECTOR IR DETECTORS

Small sensor. Great performance. The IR Quattro MICRO meets the wish of many architects and planners for a sensor that's as inconspicuous as possible. It impresses with its compact size after installation, low overall height and a micro precision lens (15 x 15 mm). At the same time, the small 360° infrared presence puts on a great performance, covering 36 m². IP65 certification also makes it suitable for rooms exposed to moisture.

Required by planners and architects, made by STEINEL. The IR Quattro MICRO fulfills many wishes. Its small size and the low profile design make it perfect for applications where disturbing installations on the ceiling are to be avoided. The micro-precision lens measures just 15 x 15 mm. Its performance is nevertheless stunning. The 360° infrared presence detector detects 36 m². And the IP65 classification lets you install it in rooms that are subject to moisture. The IR Quattro MICRO – our smallest unit with huge potential.

20013
053871 PRESENCE DETECTOR IR DETECTORS
19790 4007841029463 Presence detector US 360 knx DETECTORS

Detects without obstructions. 360° ultrasonic presence detector US 360, ideal for offices, conference rooms, store rooms and class rooms. 36 sq.m. presence detection zone, immune to obstacles, envelops objects as opposed to penetrating them, detection regardless of temperature, electronically adjustable reach, with digital BUS interface for controlling 4 lighting channels and HVAC.

Oddly shaped architecture, partition walls or other obstacles present insurmountable difficulties to some sensors. Yet the dynamic all-round precision detection capability of the US 360 KNX works with absolute reliability behind objects too. The smallest of movements are detected over up to Ø 6 m. Even in tricky detection situations. The space-filling ultrasonic waves make it possible.

19790
4007841029463 PRESENCE DETECTOR US 360 KNX DETECTORS
20012 056353 PRESENCE DETECTOR IN ROOM + luminosity, temperatu, humidity, radial distance, CO2 and VOC TRUE PRESENCE MULTISENSOR KNX: DETECTORS
True Presence® technology paired with strong senses for brightness, room temperature, humidity, radial object distance, approach / remove, CO2, volatile organic compounds (VOC) and air pressure. Nothing is hidden from him.
20012
056353 PRESENCE DETECTOR IN ROOM + LUMINOSITY, TEMPERATU, HUMIDITY, RADIAL DISTANCE, CO2 AND VOC TRUE PRESENCE MULTISENSOR KNX: DETECTORS


KNX SPECIAL CATALOGUES
Different looks for KNX push buttons
Push buttons
Smart metering
MDT Catalog 2017
Iddero Verso Interactive Presentation

LEARN
Free webinars
uBrick Tutorials
VideoTutorials CBSE


PARTICIPATE
µBrick Trivia
KNX Tips & tricks
TEST
Free test of CBSE visualization

LATEST KNX NEWS
All news

LATEST KNX OFFERS
All offers
DOWNLOADS
KNX - All brands

FUTURASMUS KNX GROUP
Contact
Location
Futurasmus in the world
FOLLOW US
YouTube Channel
Facebook
LinkedIN
Google+
Twitter

KNX++ TRAINING CENTER
Futurasmus Zentrum

CERTIFIED KNX TEST LAB
Futurasmus KNX Lab
SPECIALIZED KNX WHOLESALER CERTIFIED KNX TRAINING CENTRE
Futurasmus KNX Group is a highly specialized and internationally active KNX Wholesaler, being our forte the excellent technical support we provide. You can visit our online catalogue in this website and, if you are a professional, ask for a non binding offer for your KNX projects. Should you be interested in buying KNX components, you are welcome to read our General Sales Conditions and contact our technicians and commercial agents per telephone, e-mail or online help. Since 2003 we have been a Certified Training Centre KNX++, which means that we are entitled to impart the KNX Basic Course as well as the KNX Advanced Course and KNX Tutor Course. We are manufacturer-independent and also offer other specialized and monographic KNX seminars. After teaching more than 1.500 KNX partners, our KNX Trainers have quite a large and positive expertise. Please, contact us for customized KNX training worldwide (groups of at least 8 people) at training@futurasmus-knxgroup.org
USE OF COOKIES
We use our own and third-party cookies, analyzing your browsing habits in out website, with the finality of ensuring the quality, security and improvement of the offered services through the same. In the case that the user does not explicitly state whether to accept the installation of cookies, but continues using our website, it will mean that he has consented expressly, informing him about the possibility to block or remove the installed cookies on his computer by configuring the appropriate settings of the browser. You can get more information on this subject reading our "Cookies Policy".