Order by:   Filter results: 
Web Code Reference Description Category Price
10629 25240 Swiss Garde 300 Presence KNX/KLR. Wall mount, constant light control. DETECTORS

·       2-channel constant light control

The in-built 2-channel constant light control can be easily adjusted to meet any customer’s needs.

The two light channels can be controlled via a parametrisable offset
(-50%, synchronous, +50%) using different light values.

·       1 light output for switching, dimming or scenery selection.

·       Standby light

If the light channel is set to dimming absolute, an emergency standby light can be programmed using the standby value [%] and standby du­ra­tion [min/h]. Two value pairs can be read out from the KNX bus.

·       1 HVAC-channel with parametrisable switch-on delay.
Additionally, alarm systems with parametrisable switch-on delay can be created.

·       1 brightness output in lux (2 Byte)

·       3 pyro detectors
The presence detectors’ three PIR sensors with 360° high resolution lenses of two different diameters detect even the smallest of mo­ve­ments and can be activated individually or in groups of two and three.

·       4 different lenses
The product executions RA with a round and EA with a square lens cover are each available with 16 or 30 m detection ranges.

TECHNICAL DATA

Nominal voltage: 24 V DC (21–30 V DC)

Power consumption: 0.4 W

Detection angle: 180°

Detection range: Approx. 4 m radius presence, approx. 10 m radius at 3 m height

Installation height: 1–3 m

PIR Sensors: 3 pyro sensors for extensive detection

Sensitivity: Adjustable in 10 steps via ETS

Settings: All settings can be parameterized via ETS3

Illuminance measurement: Light sensor with optical filter and linear output

Illuminance value: Lux Value export via bus

KNX connectors: Bus terminal, 4 pins for wires (Ø 0.6–0.8 mm2 each) per pol

Protection class: SG 300 D Präsenz KNX/KLR: IP20 internal installation, class II, CE SG 300 KNX/KLR IP55 UP/AP: IP55 protected against water jets, class II, CE

Temperature range: -20 to +40 °C

Dimensions: SG 300 D Presence KNX/KLR: 80x80x32 mm (visible dimensions)

SG 300 KNX/KLR IP55 UP: 86x86x30 mm (visible dimensions)

SG 300 KNX/KLR IP55 AP: 86x86x84 mm (visible dimensions

10629
25240 SWISS GARDE 300 PRESENCE KNX/KLR. WALL MOUNT, CONSTANT LIGHT CONTROL. DETECTORS
10630 25241 Swiss Garde 300 KNX/KLR IP55 flush-mount, constant light control. DETECTORS

·       2-channel constant light control

The in-built 2-channel constant light control can be easily adjusted to meet any customer’s needs.

The two light channels can be controlled via a parametrisable offset
(-50%, synchronous, +50%) using different light values.

·       1 light output for switching, dimming or scenery selection.

·       Standby light

If the light channel is set to dimming absolute, an emergency standby light can be programmed using the standby value [%] and standby du­ra­tion [min/h]. Two value pairs can be read out from the KNX bus.

·       1 HVAC-channel with parametrisable switch-on delay.
Additionally, alarm systems with parametrisable switch-on delay can be created.

·       1 brightness output in lux (2 Byte)

·       3 pyro detectors
The presence detectors’ three PIR sensors with 360° high resolution lenses of two different diameters detect even the smallest of mo­ve­ments and can be activated individually or in groups of two and three.

·       4 different lenses
The product executions RA with a round and EA with a square lens cover are each available with 16 or 30 m detection ranges.

TECHNICAL DATA

Nominal voltage: 24 V DC (21–30 V DC)

Power consumption: 0.4 W

Detection angle: 180°

Detection range: Approx. 4 m radius presence, approx. 10 m radius at 3 m height

Installation height: 1–3 m

PIR Sensors: 3 pyro sensors for extensive detection

Sensitivity: Adjustable in 10 steps via ETS

Settings: All settings can be parameterized via ETS3

Illuminance measurement: Light sensor with optical filter and linear output

Illuminance value: Lux Value export via bus

KNX connectors: Bus terminal, 4 pins for wires (Ø 0.6–0.8 mm2 each) per pol

Protection class: SG 300 D Präsenz KNX/KLR: IP20 internal installation, class II, CE SG 300 KNX/KLR IP55 UP/AP: IP55 protected against water jets, class II, CE

Temperature range: -20 to +40 °C

Dimensions: SG 300 D Presence KNX/KLR: 80x80x32 mm (visible dimensions)

SG 300 KNX/KLR IP55 UP: 86x86x30 mm (visible dimensions)

SG 300 KNX/KLR IP55 AP: 86x86x84 mm (visible dimensions)

10630
25241 SWISS GARDE 300 KNX/KLR IP55 FLUSH-MOUNT, CONSTANT LIGHT CONTROL. DETECTORS
10633 25242 Swiss Garde 300 KNX/KLR IP55 flush-mount, constant light control. DETECTORS

·       2-channel constant light control

The in-built 2-channel constant light control can be easily adjusted to meet any customer’s needs.

The two light channels can be controlled via a parametrisable offset
(-50%, synchronous, +50%) using different light values.

·       1 light output for switching, dimming or scenery selection.

·       Standby light

If the light channel is set to dimming absolute, an emergency standby light can be programmed using the standby value [%] and standby du­ra­tion [min/h]. Two value pairs can be read out from the KNX bus.

·       1 HVAC-channel with parametrisable switch-on delay.
Additionally, alarm systems with parametrisable switch-on delay can be created.

·       1 brightness output in lux (2 Byte)

·       3 pyro detectors
The presence detectors’ three PIR sensors with 360° high resolution lenses of two different diameters detect even the smallest of mo­ve­ments and can be activated individually or in groups of two and three.

·       4 different lenses
The product executions RA with a round and EA with a square lens cover are each available with 16 or 30 m detection ranges.

TECHNICAL DATA

Nominal voltage: 24 V DC (21–30 V DC)

Power consumption: 0.4 W

Detection angle: 180°

Detection range: Approx. 4 m radius presence, approx. 10 m radius at 3 m height

Installation height: 1–3 m

PIR Sensors: 3 pyro sensors for extensive detection

Sensitivity: Adjustable in 10 steps via ETS

Settings: All settings can be parameterized via ETS3

Illuminance measurement: Light sensor with optical filter and linear output

Illuminance value: Lux Value export via bus

KNX connectors: Bus terminal, 4 pins for wires (Ø 0.6–0.8 mm2 each) per pol

Protection class: SG 300 D Präsenz KNX/KLR: IP20 internal installation, class II, CE SG 300 KNX/KLR IP55 UP/AP: IP55 protected against water jets, class II, CE

Temperature range: -20 to +40 °C

Dimensions: SG 300 D Presence KNX/KLR: 80x80x32 mm (visible dimensions)

SG 300 KNX/KLR IP55 UP: 86x86x30 mm (visible dimensions)

SG 300 KNX/KLR IP55 AP: 86x86x84 mm (visible dimensions

10633
25242 SWISS GARDE 300 KNX/KLR IP55 FLUSH-MOUNT, CONSTANT LIGHT CONTROL. DETECTORS
11037 25036 Swiss Garde 360 Presence KNX flush-mount, RA, Ø 30m, constant light control. DETECTORS

The family of Swiss Garde 360 Presence KNX/KLR RA/EA presence detectors is characterised by the following outstanding features:

 ·       2-channel constant light control

The in-built 2-channel constant light control can be easily adjusted to meet any customer’s needs.

The two light channels can be controlled via a parametrisable offset
(-50%, synchronous, +50%) using different light values.

·       1 light output for switching, dimming or scenery selection.

·       Standby light

If the light channel is set to dimming absolute, an emergency standby light can be programmed using the standby value [%] and standby du­ra­tion [min/h]. Two value pairs can be read out from the KNX bus.

·       1 HVAC-channel with parametrisable switch-on delay.
Additionally, alarm systems with parametrisable switch-on delay can be created.

·       1 brightness output in lux (2 Byte)

·       3 pyro detectors
The presence detectors’ three PIR sensors with 360° high resolution lenses of two different diameters detect even the smallest of mo­ve­ments and can be activated individually or in groups of two and three.

4 different lenses
The product executions RA with a round and EA with a square lens cover are each available with 16 or 30 m detection ranges.

11037
25036 SWISS GARDE 360 PRESENCE KNX FLUSH-MOUNT, RA, Ø 30M, CONSTANT LIGHT CONTROL. DETECTORS
11038 25037 Swiss Garde 360 Presence KNX flush-mount, EA, Ø 30m, constant light control. DETECTORS

The family of Swiss Garde 360 Presence KNX/KLR RA/EA presence detectors is characterised by the following outstanding features:

 ·       2-channel constant light control

The in-built 2-channel constant light control can be easily adjusted to meet any customer’s needs.

The two light channels can be controlled via a parametrisable offset
(-50%, synchronous, +50%) using different light values.

·       1 light output for switching, dimming or scenery selection.

·       Standby light

If the light channel is set to dimming absolute, an emergency standby light can be programmed using the standby value [%] and standby du­ra­tion [min/h]. Two value pairs can be read out from the KNX bus.

·       1 HVAC-channel with parametrisable switch-on delay.
Additionally, alarm systems with parametrisable switch-on delay can be created.

·       1 brightness output in lux (2 Byte)

·       3 pyro detectors
The presence detectors’ three PIR sensors with 360° high resolution lenses of two different diameters detect even the smallest of mo­ve­ments and can be activated individually or in groups of two and three.

4 different lenses
The product executions RA with a round and EA with a square lens cover are each available with 16 or 30 m detection ranges.

11038
25037 SWISS GARDE 360 PRESENCE KNX FLUSH-MOUNT, EA, Ø 30M, CONSTANT LIGHT CONTROL. DETECTORS
11039 25032 Swiss Garde 360 Presence KNX flush-mount, RA, Ø 16m, constant light control. DETECTORS

The family of Swiss Garde 360 Presence KNX/KLR RA/EA presence detectors is characterised by the following outstanding features:

 ·       2-channel constant light control

The in-built 2-channel constant light control can be easily adjusted to meet any customer’s needs.

The two light channels can be controlled via a parametrisable offset
(-50%, synchronous, +50%) using different light values.

·       1 light output for switching, dimming or scenery selection.

·       Standby light

If the light channel is set to dimming absolute, an emergency standby light can be programmed using the standby value [%] and standby du­ra­tion [min/h]. Two value pairs can be read out from the KNX bus.

·       1 HVAC-channel with parametrisable switch-on delay.
Additionally, alarm systems with parametrisable switch-on delay can be created.

·       1 brightness output in lux (2 Byte)

·       3 pyro detectors
The presence detectors’ three PIR sensors with 360° high resolution lenses of two different diameters detect even the smallest of mo­ve­ments and can be activated individually or in groups of two and three.

4 different lenses
The product executions RA with a round and EA with a square lens cover are each available with 16 or 30 m detection ranges.

11039
25032 SWISS GARDE 360 PRESENCE KNX FLUSH-MOUNT, RA, Ø 16M, CONSTANT LIGHT CONTROL. DETECTORS
11040 25033 Swiss Garde 360 Presence KNX flush-mount, RA, Ø 16m, constant light control. DETECTORS

The family of Swiss Garde 360 Presence KNX/KLR RA/EA presence detectors is characterised by the following outstanding features:

 ·       2-channel constant light control

The in-built 2-channel constant light control can be easily adjusted to meet any customer’s needs.

The two light channels can be controlled via a parametrisable offset
(-50%, synchronous, +50%) using different light values.

·       1 light output for switching, dimming or scenery selection.

·       Standby light

If the light channel is set to dimming absolute, an emergency standby light can be programmed using the standby value [%] and standby du­ra­tion [min/h]. Two value pairs can be read out from the KNX bus.

·       1 HVAC-channel with parametrisable switch-on delay.
Additionally, alarm systems with parametrisable switch-on delay can be created.

·       1 brightness output in lux (2 Byte)

·       3 pyro detectors
The presence detectors’ three PIR sensors with 360° high resolution lenses of two different diameters detect even the smallest of mo­ve­ments and can be activated individually or in groups of two and three.

4 different lenses
The product executions RA with a round and EA with a square lens cover are each available with 16 or 30 m detection ranges.

11040
25033 SWISS GARDE 360 PRESENCE KNX FLUSH-MOUNT, RA, Ø 16M, CONSTANT LIGHT CONTROL. DETECTORS
11041 25010 Swiss Garde Hokuspokus KNX, Ø 14 m,constant light control. DETECTORS

Presence detector 360° KNX/KLR

Ultra-flat mini KNX presence detector with constant light control

 The presence detector Swiss Garde Hokuspokus KNX/KLR is characterised by the following outstanding features:

 ·       2-channel constant light control

The in-built 2-channel constant light control can be easily adjusted to meet any customer’s needs.

The two light channels can be controlled via a parametrisable offset
(-50%, synchronous, +50%) using different light values.

·       1 light output for switching, dimming or scenery selection.

·       Standby light

If the light channel is set to dimming absolute, an emergency standby light can be programmed using the standby value [%] and standby du­ra­tion [min/h]. Two value pairs can be read out from the KNX bus.

·       1 HVAC-channel controls heating, ventilation and air conditioning. This output can be used for presence detection.
Additionally, alarm systems with parametrisable switch-on delay can be created.

 

·       1 brightness output in lux (2 Byte)

·       2 pyro detectors
Two PIR sensors with an elliptic 360° detection area can be activated individually or in pairs.

11041
25010 SWISS GARDE HOKUSPOKUS KNX, Ø 14 M,CONSTANT LIGHT CONTROL. DETECTORS
18633 25075. Swissgarde 360 Presence UP 2 CHANNELS DETECTORS

Reliable detection of smallest movements in offices and lounges, 2-channel, version for flush mounting

• Ideal for offices, schools, conference rooms etc.
• Two independent channels each for lighting and HVAC
• Automatic or semi-automatic operation
• Potential-free HVAC channe

18633
25075. SWISSGARDE 360 PRESENCE UP 2 CHANNELS DETECTORS
10648 25478 Motion Detector Swiss Garde Hokuspokus DETECTORS
Flacher Präsenzmelder für den Deckeneinbau.
Steht nur 1mm von der Decke ab!
Spart Energie und Stromkosten.

Technische Daten

Nennspannung: 230 Volt/50Hz
Schaltleistung: 2300 W / 10A max. (cos phi = 1)
1150 VA / 5A max. induktiv (cos phi = 0,5)
Zeiteinstellung: Impuls ca.1 sec (20 oder 60 sec Pause),
(Per RC) ca. 10, 30 sec, 1, 2, 6, 10, 20min
Dämmerung: 5, 50, 150, 2000 Lux, oder Speicherung
IR Fernbedienung: Auto / On / OFF (4-6m Reichweite)

Erfassungsbereich: Deckenmontage 360°, Elliptisch
Reichweite: ca. 8m bei Flacher Linsenposition
ca. 12m bei 3mm Linsenhöhe
ca. 16m bei 6mm Linsehöhe
Präsenzfunktion: ca. 4 bis 8m Ø max. sitzend

Dimensionen: 42mm Ø x 49mm (effektiv)
42mm Ø x 2mm bis 8mm (Sichtmass)
Deckenbohrung: 37 bis 38mm

Schutzart: IP 54, Klasse II
10648
25478 MOTION DETECTOR SWISS GARDE HOKUSPOKUS DETECTORS
13288 25420 Surface mount frame round DETECTORS
Marco redondeado para montaje de detectores en superfice
13288
25420 SURFACE MOUNT FRAME ROUND DETECTORS
13289 25400 Surface mount frame round DETECTORS
Marco cuadrado para montaje de detectores en superfice
13289
25400 SURFACE MOUNT FRAME ROUND DETECTORS
12529 25273 AP 360 IP55 surface mount box, white DETECTORS

 

12529
25273 AP 360 IP55 SURFACE MOUNT BOX, WHITE DETECTORS
12532 25276 UP 360 IP55 flush MOUNT BOX, WHITE DETECTORS

 

12532
25276 UP 360 IP55 FLUSH MOUNT BOX, WHITE DETECTORS
12552 25013 UP-Dosen-Kit DA SIN FAMILIA
UP-Dosen-Kit DA
12552
25013 UP-DOSEN-KIT DA SIN FAMILIA
13859 25457 Swiss Garde 360 Presence Master 16m DETECTORS
Tension nominale: 230?V?/?50?Hz 
Puissance: 2300?W?/?10?A charge ohmique (cos ? 1,0) 
1150?VA?/?5?A charge inductive (cos ? 0,5) 
ballast électronique simple: 30x 18?W, 25x 36?W ou 20x 58?W max. 
ballast électronique double: 20x (2x 18?W), 15x (2x 36?W) ou 
10x (2x 58?W) max. 
Angle de détection: 360° 
Portée: env. Ø?14?m pour une hauteur de 3?m, max. Ø?6?m présence 
Hauteur de montage: env. 2?6?m 
Réglage crépusculaire: 5?2000?lx 
(ou valeur lux actuelle par télécommande) 
Temporisation: impulsion courte (env. 1?s) ou de 10?s à 20?min environ 
Protection: IP20 montage intérieur, classe II 
Température: -20 à +40?°C 
Dimensions: Ø?105x35?mm (partie visible) 
Certification: TÜV Süd, CE

 

13859
25457 SWISS GARDE 360 PRESENCE MASTER 16M DETECTORS
15913 25320 P-IR REMOTE CONTROL DETECTORS

• Adjustment of all LUX/SENS/Time parameters via P-IR remote control
• Send button for complete parameter transmission in one go
• Memory function for all set parameters

button functions

- sEnD = Ok Transmitting and saving of all set parameters in the
movement detector (Sens, Time, Lux).

-.On/OFF Switch the light either on or off for 6 hours. Subsequently
the unit will switch back to “Auto” mode.

- auTO Automatic function in accordance with settings for the movement
detector.

-TEsT The movement detector test is independent of the ambient
light value.

Impulse pause Select the duration of the pause between 2 pulses with the impulse-pause button:

20 or 60 s for optimised control of stairwell lighting systems.

lux value read-in function Saving of the current prevailing ambient brightness value as a switch-on threshold.

15913
25320 P-IR REMOTE CONTROL DETECTORS
16553 27360 HF sensor 360 Eb, microwave detector DETECTORS
Your advantages
• For improved detection, even in obstructed spaces
• Sensitive movement detection at frontal approach
• The HF sensor also reacts well with high temperatures
• Detects smallest movements even without free line of sight of the moving persons
• Suitable for hidden installation (with wood, open metal etc.)
• Timer, light and range controller
• Ideal for invisible integration in lights or behind trim
• Zero-crossing switching for relay protection
16553
27360 HF SENSOR 360 EB, MICROWAVE DETECTOR DETECTORS
17306 3220 Infra Garde 180 UP DETECTORS
Preisgünstiger UP-Wandmelder
mit Handschalter Ein/Aus/Automatik
Tolerant bei der Detektion von Kleintieren

Nennspannung: 230 V / 50 Hz
Schaltleistung: 1000 W / 5 A (cos f 1,0)
250 VA / 1,25 A (cos f 0,5)
Erfassungsbereich: 180 Grad
Reichweite: ca. 8 m frontal und ca. 4 m seitlich
Montagehöhe: ca. 1- 1,5 m
17306
3220 INFRA GARDE 180 UP DETECTORS
18587 25270AP IP55 surface mounting box, white SIN FAMILIA

Specification

  • Mounting: Surface mount
  • Weight: 0.13 kg
  • Colour: Black, Grey, White
18587
25270AP IP55 SURFACE MOUNTING BOX, WHITE SIN FAMILIA
18691 25270UP IP55 cover for Swiss Garde 300 motion detectors SENSORS
 
18691
25270UP IP55 COVER FOR SWISS GARDE 300 MOTION DETECTORS SENSORS


KNX SPECIAL CATALOGUES
Different looks for KNX push buttons
Push buttons
Smart metering
Iddero Verso Interactive Presentation

LEARN
Free webinars
uBrick Tutorials
VideoTutorials CBSE


PARTICIPATE
µBrick Trivia
KNX Tips & tricks
TEST
Free test of CBSE visualization

LATEST KNX NEWS
All news

LATEST KNX OFFERS
All offers
DOWNLOADS
KNX - All brands

FUTURASMUS KNX GROUP
Contact
Location
Futurasmus in the world
FOLLOW US
YouTube Channel
Facebook
LinkedIN
Google+
Twitter

KNX++ TRAINING CENTER
Futurasmus Zentrum

CERTIFIED KNX TEST LAB
Futurasmus KNX Lab
SPECIALIZED KNX WHOLESALER CERTIFIED KNX TRAINING CENTRE
Futurasmus KNX Group is a highly specialized and internationally active KNX Wholesaler, being our forte the excellent technical support we provide. You can visit our online catalogue in this website and, if you are a professional, ask for a non binding offer for your KNX projects. Should you be interested in buying KNX components, you are welcome to read our General Sales Conditions and contact our technicians and commercial agents per telephone, e-mail or online help. Since 2003 we have been a Certified Training Centre KNX++, which means that we are entitled to impart the KNX Basic Course as well as the KNX Advanced Course and KNX Tutor Course. We are manufacturer-independent and also offer other specialized and monographic KNX seminars. After teaching more than 1.500 KNX partners, our KNX Trainers have quite a large and positive expertise. Please, contact us for customized KNX training worldwide (groups of at least 8 people) at training@futurasmus-knxgroup.org
USE OF COOKIES
We use our own and third-party cookies, analyzing your browsing habits in out website, with the finality of ensuring the quality, security and improvement of the offered services through the same. In the case that the user does not explicitly state whether to accept the installation of cookies, but continues using our website, it will mean that he has consented expressly, informing him about the possibility to block or remove the installed cookies on his computer by configuring the appropriate settings of the browser. You can get more information on this subject reading our "Cookies Policy".